Használati útmutató HiKOKI TCS33EB

HiKOKI Fűrészgép TCS33EB

Olvassa el alább 📖 a magyar nyelvű használati útmutatót HiKOKI TCS33EB (68 oldal) a Fűrészgép kategóriában. Ezt az útmutatót 2 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/68
SAFETY INSTRUCTIONS AND INSTRUCTION MANUAL
WARNING
IMPROPER OR UNSAFE use of this power tool can result in death or serious bodily injury!
This manual contains important information about product safety. Please read and understand
this manual BEFORE operating the power tool. Please keep this manual available for other users
and owners before they use the power tool. This manual should be stored in safe place.
INSTRUCTIONS DE SECURITE ET MODE D’EMPLOI
AVERTISSEMENT
Une utilisation de cet outil motorisé peut entraîner la mort INCORRECTE OU DANGEREUSE
ou de sérieuses blessures corporelles !
Ce mode d’emploi contient d’importantes informations à propos de la sécurité de ce produit.
Prière de lire et de comprendre ce mode d’emploi AVANT d’utiliser l’outil motorisé. Garder ce
mode d’emploi à la disponibilité des autres utilisateurs et propriétaires avant qu’ils utilisent l’outil
motorisé. Ce mode d’emploi doit être conservé dans un endroit sûr.
INSTRUCCIONES DE SEGURIDAD Y MANUAL DE INSTRUCCIONES
ADVERTENCIA
¡La utilización de esta herramienta eléctrica puede provocar INAPROPIADA O PELIGROSA
lesiones graves o la muerte!
Este manual contiene información importante sobre la seguridad del producto. Lea y comprenda
este manual ANTES de utilizar la herramienta eléctrica. Guarde este manual para que puedan
leerlo otras personas antes de utilizar la herramienta eléctrica. Este manual debe ser guardado
en un lugar seguro.
Model
Modèle
Modelo TCS 33EB Chain Saw
Tronçonneuse
Motosierra
Designed for operating in USA & Canada only.
When this product is used in areas other than the USA & Canada,
we cannot guarantee the product quality and performance.
2
English
WARNING
The engine exhaust from this product contains chemical
known to the State of California to cause cancer, birth
defects or other reproductive harm.
SAFETY PRECAUTIONS FOR
CHAIN SAW USERS
Kickback safety precautions
WARNINGS! : Kickback may occur when the nose
or tip of the guide bar touches an object, or when the
wood closes in and pinches the saw chain in the cut.
Tip contact in some cases may cause a lightning-fast
reverse reaction, kicking the guide bar up and back
toward the operator. Pinching the saw chain along the
top of the guide bar may push the guide bar rapidly
back toward the operator. Either of these reactions may
cause you to lose control of the saw, which could result
in serious personal injury. Do not rely exclusively upon
the safety devices built into your saw. As a chain saw
user, you should take several steps to keep your cutting
jobs free from accident or injury. ( Fig.1)
1
Fig. 1
○
With a basic understanding of kickback, you can
reduce or eliminate the element of surprise. Sudden
surprise contributes to accidents.
○
Keep a good fi rm grip on the saw with both hands,
the right hand on the rear handle and the left hand
on the front handle, when the engine is running. Use
a fi rm grip with thumbs and fi ngers encircling the
chain saw handles. A fi rm grip will help you reduce
kickback and maintain control of the saw. Don't let
go.
○
Make sure that the area in which you are cutting
is free from obstructions. Do not let the nose of
the guide bar contact a log, branch, or any other
obstruction that could be hit while you are operating
the saw.
○
Cut at high engine speeds.
○
Do not overreach or cut above shoulder height.
○
Follow the manufacturer's sharpening and
maintenance instructions for the saw chain.
○
Only use replacement bars and chains specifi ed by
the manufacturer or the equivalent.
Other safety precautions
○
Do not operate a chain saw with one hand! Serious
injury to the operator, helpers, bystanders, or any
combination of these persons may result from
one-handed operation. A chain saw is intended for
two-handed use.
○
Do not operate a chain saw when you are fatigued.
○
Use safety footwear, snug-fi tting clothing, protective
gloves, and eye, hearing, and head protection
devices.
○
Use caution when handling fuel. Move the chain saw
at least 10 feet (3 m) from the fueling point before
starting the engine.
○
Do not allow other persons to be near the chain saw
when starting or cutting with the chain saw. Keep
bystanders and animals out of the work area.
○
Do not start cutting until you have a clear work area,
secure footing, and a planned retreat path from the
falling tree.
○
Keep all parts of your body away from the saw chain
when the engine is running.
○
Before you start the engine, make sure that the saw
chain is not contacting anything.
○
Carry the chain saw with the engine stopped, the
guide bar and saw chain to the rear, and the muffl er
away from your body.
○
Do not operate a chain saw that is damaged,
improperly adjusted, or not completely and securely
assembled. Be sure that the saw chain stops moving
when the throttle control trigger is released.
○
Shut off the engine before setting the chain saw
down.
○
Use extreme caution when cutting small-size brush
and saplings because slender material may catch
the saw chain and be whipped toward you or pull
you off balance.
○
When cutting a limb that is under tension, be alert
for springback so that you will not be struck when
the tension in the wood fi bers is released.
○
Keep the handles dry, clean, and free of oil or fuel
mixture.
○
Operate the chain saw only in well-ventilated areas.
○
Do not operate a chain saw in a tree unless you have
been specifi cally trained to do so.
○
All chain saw service, other than the items
listed in the instruction manual(s) maintenance
instructions, should be performed by competent
chain saw service personnel.
(For example, if
improper tools are used to remove the fl ywheel or
if an improper tool is used to hold the fl ywheel in
order to remove the clutch, structural damage to the
fl ywheel could occur and subsequently could cause
the fl ywheel to burst.).
○
When transporting your chain saw, use the
appropriate guide-bar scabbard.
English
3
MEANINGS OF SYMBOLS
NOTE:
Some units do not carry them.
Symbols
WARNING
The following show symbols used for the machine. Be sure that you understand their meaning before
use.
It is important that you read, fully understand
and observe the following safety precautions
and warnings. Careless or improper use of
the unit may cause serious or fatal injury.
Emergency stop
Read, understand and follow all warnings
and instructions in this manual and on the
unit.
Fuel and oil mixture
Always wear eye, head and ear protectors
when using this unit. Chain oil fi ll
Warning, kickback danger. Be careful of
possible sudden and accidental upward and/
or backward motion of the guide bar.
Carburetor adjustment - Idle speed
One-handed usage not permitted. While
cutting, hold saw fi rmly with both hands with
thumb fi rmly locked around front handle.
Carburetor adjustment - Low speed mixture
Chain brake Carburetor adjustment - High speed mixture
Choke Priming pump
On/Start Computed kickback angle (CKA) without a
chain brake
Off /Stop
Contents
WHAT IS WHAT? ........................................................4
WARNINGS AND SAFETY INSTRUCTIONS ............5
SPECIFICATIONS ......................................................7
ASSEMBLY PROCEDURES ......................................8
OPERATING PROCEDURES .....................................9
MAINTENANCE .......................................................15
Parts breakdown

Termékspecifikációk

Márka: HiKOKI
Kategória: Fűrészgép
Modell: TCS33EB

Szüksége van segítségre?

Ha segítségre van szüksége HiKOKI TCS33EB, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók Fűrészgép HiKOKI

HiKOKI

HiKOKI C 6BU3 Útmutató

12 Január 2025
HiKOKI

HiKOKI C10FSB Útmutató

12 Január 2025
HiKOKI

HiKOKI C8FSE Útmutató

29 Augusztus 2024
HiKOKI

HiKOKI CJ160VA Útmutató

25 Augusztus 2024
HiKOKI

HiKOKI C10FCE2 Útmutató

23 Augusztus 2024
HiKOKI

HiKOKI C10RJ Útmutató

23 Augusztus 2024
HiKOKI

HiKOKI C1806DB Útmutató

23 Augusztus 2024
HiKOKI

HiKOKI C 3606DPA Útmutató

23 Augusztus 2024
HiKOKI

HiKOKI C 3607DA Útmutató

23 Augusztus 2024
HiKOKI

HiKOKI M 12V2 Útmutató

23 Augusztus 2024

Útmutatók Fűrészgép

Legújabb útmutatók Fűrészgép

Makita

Makita DPC6430 Útmutató

1 Április 2025
Makita

Makita DCS431 Útmutató

1 Április 2025
Makita

Makita DCS430 Útmutató

1 Április 2025
Makita

Makita EK6101 Útmutató

1 Április 2025
Makita

Makita DCS6401 Útmutató

1 Április 2025
Kraftronic

Kraftronic KT-ST 550 Útmutató

30 Március 2025
Kraftronic

Kraftronic KT-US 650 Útmutató

30 Március 2025
Kraftronic

Kraftronic KT-HK 1250 Útmutató

30 Március 2025
Kraftronic

Kraftronic KT-HK 1410 Útmutató

30 Március 2025
Makita

Makita 4334DWDE Útmutató

30 Március 2025