Használati útmutató Highpoint RocketRAID 3742A

Highpoint vezérlő RocketRAID 3742A

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Highpoint RocketRAID 3742A (31 oldal) a vezérlő kategóriában. Ezt az útmutatót 11 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF

Oldal 1/31

RocketRAID 3700 Series

SAS 12Gb/s -PCI Express 3.0 x8 RAID Controller

User’s Guide

v1.04

or transcribed in any form and for any purpose without the express written permission of HighPoint

Technologies, Inc.

Trademarks

Companies and products mentioned in this manual are for identification purpose only. Product names or

brand names appearing in this manual may or may not be registered trademarks or copyrights of their

respective owners. Backup your important data before using HighPoint's products and use at your own

risk. In no any indirect, event HighPoint liable shall be for loss of profits, orfor direct, special, incidental

or or or arising defect consequential damages from any error in HighPoint's products manuals.

Information in this manual is subject to change without notice and does not represent a commitment on

the part of HighPoint.

Notice

Reasonable in is HighPoint effort has been made to ensure that the information this manual accurate.

assumes no liability f or technical inaccuracies, typographical, or other errors containedherein.

FCC Part 15 Class B Radio Frequency Interference statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant

to part 15 of the FCC Rules. These limits are designed to provide reasonable protectionagainst harmful

interference in a residential installation. This equipment generates uses and canradiate radio frequency

energy and, if not installed and used in accordance with the instructions,may cause harmful interference

to radio communications. However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or television reception, which can

be determined by turning the equipment off and on, the user encouraged is to try to correct the

interference by one or more following of the measures:

 Reorient or relocate the receiving antenna.

 Increase the separation between the equipment and receiver.

 Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

 Consult the dealer or experienced help. an radio/TV technician for

Modifications expressly void not approved by the manufacturer could the user’s authority to operate

the FCC rules. equipment under

This part Operation subject complies with device FCC 15 of the Rules. is following to the two conditions:

(1) (2) device interference, this may not cause harmful and device interference this must accept any

received, including that interference may cause undesired operation.

European Union Compliance Statement

This Information Technologies Equipment has been tested and found to comply with the followingEuropean

directives:

 European Standard EN55022 (1998) Class B

 European Standard EN55024 (1998)

Table of Contents

HighPoint RocketRAID 3700 Overview .......................................................................................................... 4

Board Hardware Layout & Installation.......................................................................................................... 5

What’s in Bo the x .......................................................................................................................................... 6

Using the RocketRAID 3700 .......................................................................................................................... 6

4.1.

Using the RocketRAID Series HBA BIOS ................................................................................................. 6

4.1.1

RocketRAID BIOS Setting Utility ................................................................................................... 6

4.1.2

Using the BIOS Utility ................................................................................................................... 7

4.1.3

BIOS Commands ........................................................................................................................... 7

4.1.4

Creating RAID Arrays .................................................................................................................... 7

4.1.5

Delete Arrays ................................................................................................................................ 9

4.1.6

Add/Remove Spare Disks ............................................................................................................. 9

4.1.7

Settings ...................................................................................................................................... 10

4.1.8

View ........................................................................................................................................... 10

4.2.

Driver & WebGUI Installation .............................................................................................................. 11

4.2.1

Driver and (Windows)WebGUI Installation ............................................................................... 11

4.2.2

Driver and (Linux)WebGUI Installation ..................................................................................... 11

4.2.3

Driver and (Mac)WebGUI Installation ....................................................................................... 12

4.3 Using the HighPoint WebGUI ................................................................................................................ 12

Verify Controller the Status ........................................................................................................................ 12

Creating an Array ........................................................................................................................................ 13

Adding Spare Disks ...................................................................................................................................... 15

Obtaining evice InformationLogical D ......................................................................................................... 17

Array &Maintenance Normal Information Options: Status ........................................................................ 17

Array Information & Maintenance Options: Critical Status ........................................................................ 18

Array Information & Maintenance Options: Disabled Status ..................................................................... 18

Physical Information Device ....................................................................................................................... 19

System Setting .................................................................................................................................................... 19

System Setting ............................................................................................................................................ 20

Password Settings ....................................................................................................................................... 20

Email Setting ............................................................................................................................................... 21

Event Tab ............................................................................................................................................................ 22

SHI (Storage Health Inspector) ........................................................................................................................... 23

How SMART Monitoring to Enable ............................................................................................................. 23

How to Use the SchedulerHealth Inspector ............................................................................................... 24

How Verify Task to Create a New ............................................................................................................... 24

Troubleshooting .................................................................................................................................................. 25

Handling Critical Arrays ....................................................................................................................................... 25

Rebuilding SectorsStops Due to Bad .......................................................................................................... 26

Critical array becomes disabled when removed you faulty disk ................................................................ 26

Handling Disabled Arrays .................................................................................................................................... 26

Help ..................................................................................................................................................................... 27

Table 1.HRM Icon Guide ..................................................................................................................................... 28

Table RAID Guide2. Level Reference .................................................................................................................. 30

Customer Support ....................................................................................................................................... 31