Használati útmutató Havis C-SM-SA

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Havis C-SM-SA (5 oldal) a Autós készlet kategóriában. Ezt az útmutatót 3 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/5
C-SM_INST_ -10 9
INSTALL INSTRUCTIONS C-SM SERIES
ANGLED HEAVY DUTY CONSOLE & ACCESSORIES
TOOLS REQUIRED:
Standard socket set w/ 6”extension
Metric socket set w/ 6” extension
Standard wrench set
Metric wrench set
Torx bit set w/ driver
Slide ¼” nuts into extrusion.
This can be done on inside of
console at top of extrusion.
Tunnel Plate (C-TMW-xx)
(Part # varies depending on vehicle type)
Pentex Printer
Mount
( )C-PMS
Console Extension
(C-SM-600, 800 or
1200)
Angled Heavy Duty
Console
(C- - )SM 830 or 1225
Keyboard/Laptop
Platform
( ) C-SM-SA-1
Monitor Platform
(C-SM-MMP)
C-SM_INST_ -10 9
Always!
¾ Read all instructions before installing any Havis, Inc. products.
¾ Check for obstructions (Wire, brake lines, fuel tank, etc.) before drilling any holes!
¾ Use hardware provided with install kit
SUB ASSEMBLY:
1. Install Tunnel Mount into vehicle. (See Tunnel Mount
specific install instructions.)
2. Determine desired height of console and console
accessories prior to mounting in vehicle.
INSTALLATION:
1. ADJUST CONSOLE HEIGHT: (See Figure #1)
To adjust height remove carriage bolts on side
of console.
Mount necessary accessories to side of console.
(Monitor platform, keyboard/laptop platform,
printer, etc. See instructions below.)
With all accessories and height determined, re-attach
carriage bolts and nuts to console.
2. ATTACH MONITOR PLATFORM: (See Figure #2)
Mounting platform attaches to side of console using
supplied carriage bolts and serrated nuts.
Monitor mounting platform will mount to front row of
holes on console.
Attach C-UMM-101 and C-MM-XXX brackets to
monitor platform prior to attaching to console.
Note: Prior to mounting accessories to side of Angled Heavy Duty console
be sure to adjust height.
3. ATTACH KEYBOARD/LAPTOP PLATFORM:
(See Figure #3)
Mounting platform attaches to side of console using supplied
carriage bolts and serrated nuts.
When using platform for a keyboard, mount on rear rows
of holes on console.
When using platform for a laptop, you have the option of using
any row of holes for desired height.
Attach tilt / swivel, keyboard/laptop mount to swing arm assembly.
RE: C-MD-202, C-KBM-101 (sold separate)
Note: Prior to mounting accessories to side of Angled Heavy Duty console be sure to adjust height.
Height Adjustment
Figure #1
Figure #2
Mounts to sides of
Console
Figure #3
Mounts to sides of
Console
C-SM_INST_ -10 9
4. ATTACH PENTEX PRINTER BRACKET: (See Figure #4)
Printer bracket attaches to front side of console.
When mounted properly, printer housing will slide toward passenger side seat.
Attach to Angled Heavy Duty console using supplied screws and Keps nuts.
5. MOUNT CONSOLE TO TUNNEL PLATE:
Slide ¼-20 x ¾” bolts into slots of Tunnel Plate.
Place Angled Heavy Duty console over ¼” bolts.
Position console and attach to Tunnel using ¼-20 serrated nuts.
6. (C-SM-600, 800, 1200 see Figure 5) ATTACH CONSOLE EXTENSION:
With Angled Heavy Duty console attached to Tunnel, position and attach 6” console
extension. **A spare plastic end cap is provided in case you choose not to attach
consoles together. Simply peel and stick to console end plate if desired.
Slide (2) ¼-20 x ¾” hex head bolts into slots of Tunnel Plate.
Place console extension and bolt down using ¼-20 serrated nuts.
Connect opposite end-to-end plate of Angled Heavy Duty housing. (Slot to slot).
Adjust height as desired.
Wire and install control heads and accessories.
Mounts to
Angled Heavy
Duty console
Mounting
Hardware
Figure #4 Figure #5
Tunnel Plate
Hardware
A spare plastic end
cap is provided in
case you choose not
to attach consoles
together

Termékspecifikációk

Márka: Havis
Kategória: Autós készlet
Modell: C-SM-SA

Szüksége van segítségre?

Ha segítségre van szüksége Havis C-SM-SA, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók Autós készlet Havis

Havis

Havis PKG-PSM-118 Útmutató

1 Szeptember 2024
Havis

Havis C-HDM-201 Útmutató

1 Szeptember 2024
Havis

Havis C-HDM-183 Útmutató

1 Szeptember 2024
Havis

Havis C-HDM-407 Útmutató

1 Szeptember 2024
Havis

Havis DS-DA-409 Útmutató

1 Szeptember 2024
Havis

Havis C-HDM-204 Útmutató

1 Szeptember 2024
Havis

Havis UT-X-SD-KIT-1 Útmutató

1 Szeptember 2024
Havis

Havis C-HDM-141 Útmutató

1 Szeptember 2024
Havis

Havis PKG-PSM-144 Útmutató

1 Szeptember 2024

Útmutatók Autós készlet

Legújabb útmutatók Autós készlet

Metra

Metra 99-8270HG Útmutató

3 Április 2025
Metra

Metra 99-8722B Útmutató

3 Április 2025
Metra

Metra 99-7802CH Útmutató

3 Április 2025
Metra

Metra 99-8214TG Útmutató

3 Április 2025
ZZ-2

ZZ-2 IC-SYM Útmutató

2 Április 2025
Metra

Metra 99-4000 Útmutató

1 Április 2025
Nokia

Nokia HF-33W Útmutató

16 Január 2025
Renegade

Renegade REN10KIT Útmutató

31 December 2025
Metra

Metra 95-7883HG Útmutató

29 December 2024
Metra

Metra AX-ADCT4 Útmutató

29 December 2024