Használati útmutató Hager WGDCH4

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Hager WGDCH4 (4 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 4 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/4
www.hager.com
Safety instructions
Electrical equipment must only be installed and assembled by a qualied
electrician in accordance with the relevant installation standards, regulations,
directives and safety and accident prevention directives of the country.
Failure to comply with these installation instructions may result in damage to
the device, re or other hazards.
Function
Multiple frames for 2gang to 5gang combinations of ush-mounted devices.
The frames are suitable for vertical as well as for horizontal installation.
Correct use
- For ush-mounted installation with standard connectable wall boxes.
- Only suitable for use in indoor areas with no drip and no spray water.
Technical data
For horizontal installation:
Dimensions (Width x Height)
- 2gang: 170.2 x 86 mm
- 3gang: 256.3 x 86 mm
- 4gang: 342.3 x 86 mm
- 5gang: 428.3 x 86 mm
For vertical installation:
Dimensions (Width x Height)
- 2gang: 86 x 170.2 mm
- 3gang: 86 x 256.3 mm
- 4gang: 86 x 342.3 mm
- 5gang: 86 x 428.3 mm
Multi-gang frames
2gang / 3gang / 4gang / 5gang
Hager Dream
Installation manual
2
Information for electricians
Installation and electrical connection
Preparing the devices for installation
Remove cover at every single device to be combined (see installation manual of the
respective device).
Connecting the devices for multiple combinations
(for example with "3gang frame (horizontal)")
For tting of the devices the multi-gang frame has two diagonally arranged snap mecha-
nisms (1). On the outside corners of the supporting plate the devices have corresponding
xing holes for snapping onto multi-gang frame.
1
Fixing holes
Snap
mechanisms
Click
Click
Click
Click
Click
Click
Depending on the application position the multi-gang frame horizontally or vertically.
Example here: horizontal (1).
Snap the devices one after the other in the desired order on the multi-gang frame (1).
3
Installing the device combination into the wall box
(for example with “3gang frame (horizontal)”)
DANGER!
Touching live parts can result in an electric shock.
An electric shock can lead to death.
Disconnect the connecting cables before working on the device and
cover all live parts in the area!
ç
Wire each device of the combination according to its wiring diagram (see installation
manual of the respective device).
2
Multigang frame
After wiring, x the device combination with the screws into the wall boxes ( ).2

Termékspecifikációk

Márka: Hager
Kategória: nincs kategorizálva
Modell: WGDCH4

Szüksége van segítségre?

Ha segítségre van szüksége Hager WGDCH4, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók nincs kategorizálva Hager

Hager

Hager LLD100 Útmutató

12 Január 2025
Hager

Hager GS11019016 Útmutató

31 December 2025
Hager

Hager EG203 Útmutató

31 December 2025
Hager

Hager MZN131 Útmutató

31 December 2025
Hager

Hager FN367E Útmutató

31 December 2025
Hager

Hager FN097E Útmutató

31 December 2025
Hager

Hager FN117E Útmutató

31 December 2025
Hager

Hager FN296E Útmutató

31 December 2025
Hager

Hager FN247E Útmutató

13 December 2024

Útmutatók nincs kategorizálva

Legújabb útmutatók nincs kategorizálva