Használati útmutató Hager K7P1M075W

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Hager K7P1M075W (17 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 3 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/17
Klik Lighting
Connection
Catalogue
Klik is the lighting connection system for
all your lighting designs, beneting from its
modular and adaptable design. From concept
to commissioning, Klik adapts to meet your
requirements.
5
Part of the problem with traditional
lighting systems comes when a building
or ofce space needs to change. The
inherent benet of Klik is that adapting
to a new layout is as easy as plugging
in a plug.
The Klik connector system brings
plug-in convenience and versatility to
lighting. Lights can be plugged-in, in
seconds, with absolute safety, without
circuit isolation.
The unique design prevents any
unwanted disconnections due to load
on cables or vibrations.
Klik is a truly t and forget lighting
connection system. With a range of
settings for daylight linked dimming,
occupancy sensing photocell control
for standard luminaires and DALI
control, after Klik is installed, you’ll
forget its even there.
04
Adapt
02
Install
03
Use
7
CIBSE
Use Occupancy Sensors
Use Daylight Sensors
Have a Maintenance Plan
Daylight Link
Klik allows for automatic lighting
control which can provide energy
savings by not operating when
sufcient light levels exist.
Occupancy Sensing
Our range of occupancy sensors can
provide presence and absence control
of lighting, providing energy savings by
switching lights on or off depending on
the usage of the room.
Safe on-load connection
Luminaires can be connected in
seconds in absolute safety, without
circuit isolation, as all live contacts are
inaccessible and the earth connection
is made before any other, facilitating a
simplied maintenance plan.
Electro Mechanical Connection
All Klik plugs feature a unique plug-in
method which achieves a simultaneous
mechanical and electrical connection.
Trimming of lux level
DALI based occupancy sensors enable
trimming of lux level at commissioning
stage to ensure optimum nal lighting
levels, when used with compatible,
dimmable luminaire.
DALI Control
DALI (digital addressable
lighting interface) is a broadcast
communication system that brings
digital technology to lighting. Our 7 pin
Klik products offer full compatibility
with DALI control solutions.
Klik 3 / 4 Klik 7
Connection
Safe on-load connection / disconnection
Superior electromechanical connection
Control
Occupancy sensing for on / off control
Occupancy sensing for daylight linked on / off control
Lux level ‘trimming’ during commissioning
Automatic dimming (daylight linked)
Manual dimming (via wall switch)
DALI / DSI
Benets - At a Glance
06
02 0301
0504
By following the information CIBSE provide, building operators, designers and employers
are better able to demonstrate compliance with UK building regulations and a number of
lighting related BS EN standards, by incorporating the following Klik features.

Termékspecifikációk

Márka: Hager
Kategória: nincs kategorizálva
Modell: K7P1M075W

Szüksége van segítségre?

Ha segítségre van szüksége Hager K7P1M075W, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók nincs kategorizálva Hager

Hager

Hager ARF560D Útmutató

2 Április 2025
Hager

Hager ARF570D Útmutató

2 Április 2025
Hager

Hager ARF525D Útmutató

2 Április 2025
Hager

Hager ARF566D Útmutató

2 Április 2025
Hager

Hager ARF556D Útmutató

2 Április 2025
Hager

Hager CF240J Útmutató

2 Április 2025
Hager

Hager CE463J Útmutató

2 Április 2025
Hager

Hager ARF520D Útmutató

2 Április 2025
Hager

Hager ARF506D Útmutató

2 Április 2025
Hager

Hager ARF575D Útmutató

2 Április 2025

Útmutatók nincs kategorizálva

Legújabb útmutatók nincs kategorizálva