Használati útmutató Hager 75642055

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Hager 75642055 (13 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 3 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/13
Glass sensor 2gang with room thermostat
Order No. : 7564 2x xx
Glass sensor 3gang with room thermostat
Order No. : 7564 3x xx
Operation- and
Assembly Instructions
1 Safety instructions
Electrical equipment may only be installed and fitted by electrically skilled persons.
Serious injuries, fire or property damage possible. Please read and follow manual fully.
Do not use any sharp objects, acids or organic solvents for cleaning. Device can be
damaged.
Do not operate the device with sharp or pointed objects. The touch-sensitive surface
could be damaged.
These instructions are an integral part of the product, and must remain with the end
customer.
2 Device components
Figure 1
(1) Sensor buttons / , /– OK + ¨
(2) Sensor buttons for operating functions
(3) Status LED
(4) Operation LED
3 Function
System information
This device is a product of the KNX system and complies with the KNX directives. Detailed
technical knowledge obtained in KNX training courses is a prerequisite to proper
understanding.
The function of this device depends upon the software. Detailed information on loadable
software and attainable functionality as well as the software itself can be obtained from the
manufacturer´s product database. Planning, installation and commissioning of the device are
carried out with the aid of KNX-certified software. The latest versions of product database and
the technical descriptions are available on our website.
Seite 1/13
Touch/Glass sensor 2gang / 3gang with room thermostat
32586901
97-09635-000 13.09.2013
KNX
Intended use
- Operation of loads, e.g. light on/off, dimming, blinds up/down, brightness values,
temperatures, calling up and saving light scenes, etc.
- Touch sensor: Installation in double flush-mounted appliance box according to DIN 49073
- Glass sensor: Glass sensor TS: Installation in double installation socket for glass sensor
(see chapter 6.3. Accessories)
Product characteristics
- The pushbutton functions switching, dimming, controlling blinds, value transmitter, calling
up moods, etc.
- Operation through touching the sensor buttons
- LED to display status or actuation
- Integrated room temperature sensor
- Room temperature control with setpoint value specification
- Display of room and setpoint temperature
- Display of external temperature; in conjunction with external KNX temperature sensor
- Display of day and time, in conjunction with KNX time encoder
- Temperature limitation for floor heating; in conjunction with external temperature sensor
- Integrated bus coupling unit
4 Operation
The operation of functions or electrical consumers can be set individual for each device. Two
operating modes are used:
- Single button operation:
Switching on or off or dimming brighter/darker, e.g. of lighting, takes place alternately when
the same sensor button is pressed repeatedly.
- Two button operation:
Two sensor buttons next to each other form a function pair. Pressing the left button,
for example, switches or dims lighting on or brighter, pressing the right one switches it off
or makes it darker.
Operating a function or load
Consumers such as lighting, blinds, etc. are operated using the sensor buttons (2) and such
operation depends on the programming of the device.
o Press a sensor button.
The stored function is executed.
i The actuation pulse is relative to the length of touch. Depending on the function, short and
long actuations may trigger different actions, e.g. switching/dimming.
Operating modes and display icons
The device compares the current room temperature with the setpoint temperature and controls
heating or cooling devices according to the current demand. The setpoint temperature depends
on the current operating mode and can be changed by the user, depending on the
programming. The operating modes and the current controller status are shown in the display.
Seite 2/13 13.09.2013
32586901
97-09635-000
KNX
Touch/Glass sensor 2gang / 3gang with room thermostat
Figure 2
ą Operating mode Comfort
Ć Operating mode Standby
g Operating mode Night
ċ Operating mode Frost/heat protection
š Display dewpoint operation; controller blocked
ąg Comfort extension, night
ąċ Comfort extension, frost protection
› Setpoint value shift active
Ā ā Ă, , Fan controller with fan level display
ĉ Heating mode
Ċ Cooling mode
Ĉ Icon blocked: buttons locked
ă Interior temperature
Ą Outdoor temperature
1 ... 7 Weekdays Mon...Sun
+ and Active when values are changed.
OK and Active, when the menu is active. ¨
The numeric display shows temperature values or times.
Basic display
Depending on the programming, the display can either be switched on permanently or for a
specific time.
Figure 3
Seite 3/13 13.09.2013
32586901
97-09635-000
KNX
Touch/Glass sensor 2gang / 3gang with room thermostat

Termékspecifikációk

Márka: Hager
Kategória: nincs kategorizálva
Modell: 75642055

Szüksége van segítségre?

Ha segítségre van szüksége Hager 75642055, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók nincs kategorizálva Hager

Hager

Hager VM206 Útmutató

13 Október 2024
Hager

Hager NCN110A Útmutató

11 Október 2024
Hager

Hager BD163T Útmutató

9 Október 2024
Hager

Hager NCN303A Útmutató

9 Október 2024
Hager

Hager VM202K Útmutató

9 Október 2024
Hager

Hager JK116BA3 Útmutató

4 Október 2024
Hager

Hager JK108BSH Útmutató

4 Október 2024
Hager

Hager VML406AH Útmutató

3 Október 2024
Hager

Hager JKD188TM Útmutató

27 Szeptember 2024
Hager

Hager NDN406A Útmutató

24 Szeptember 2024

Útmutatók nincs kategorizálva

Legújabb útmutatók nincs kategorizálva