Használati útmutató Güde TK 2400 ECO

Güde Fűrészgép TK 2400 ECO

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Güde TK 2400 ECO (16 oldal) a Fűrészgép kategóriában. Ezt az útmutatót 2 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/16
#55166
TK 2400 ECO
© Güde GmbH & Co. KG - Birkichstrasse 6 - D-74549 Wolpertshausen - Deutschland
English GB 18
Translation of original operating instructions
Circular saw bench
Unit
Mobile bench circular saw with a quality aluminium stop and a plastic mitre cut stop, height readjustment and mitre adjustment by a
hand wheel.
Accessories (standard): table extension (removable 250 mm) of steel powder colour coated. Dust exhaust, saw disc of sintered metal,
sliding guide rod, emergency switch, stop bar with millimetre scale, unit with base.
Appropriate accessories: spare saw disc (55163).
Scope of use: ideal for construction sites and indoor work.
Scope of Delivery
Fig. 1
1. Saw bench
2. Legs (4 pcs)
3. Prop to attach the extension (4 pcs)
4. Fixing/mounting material ( 8, 9, 10)
5. Props (4 pcs)
6. Props (4 pcs)
7.
8. Cup headed bolt (32 pcs)
9. hexagon nut (32 pcs)
10. Washer (32 pcs)
11. Sliding guide bar
12. Saw disc cover
13. Mitre cut stop
14. Exhaust hose
15. Parallel stop
16. Bench extension
Fig. 2
1. Saw disc cover
2. Saw disc
3. Mitre cut stop
4. Bench extension
5. Bench extension prop
6. Parallel stop clamping lever
7. Scale
8. Base
9. Saw disc height readjustment
10. Saw disc turning readjustment
11. Emergency switch
12. Turning readjustment lock lever
13. Magnifying glass
14. Mitre cut stop
15. Exhaust hose
16. Exhaust throat
17. Cutting wedge
18. Saw disc
19. Sliding guide rod
18
Guarantee
The guarantee exclusively applies to material or manufacturing defects. The original proof of purchase with the purchase date must be
submitted when lodging a claim in the guarantee period. The guarantee does not include any unauthorised use, e.g. appliance
overloading, violent use, damage by a third party or foreign item. The failure to follow the Operating Instructions and assembly
instructions and common wear and tear are not covered by the guarantee either.
General Safety Instructions
Prior to the initial use of the unit, the operating instructions should be read completely. If in doubt with regard to connection and
operation of the unit, consult the manufacturer (servicing department).
FOLLOW THE INSTRUCTIONS BELOW CAREFULLY IN ORDER TO SECURE A HIGH DEGREE OF SAFETY:
Caution: Always operate with an FI (faulty current protection switch )!
Caution!
• Keep your workplace clean and tidy.
Disorder at the worksite and bench in
creases the risk of accidents and injuries.
• Mind the conditions you work in. Never use electric tools in rainy weather. Never use the electric tools in moist and wet
surroundings. Provide for good lighting. Do not use the electric tools in the proximity of flammable liquids and gases. Do not
expose the electrical tools to rain or high air humidity.
• Do not let other persons access the unit. Visitors and watchers, children and sick or inform persons should be kept at a safe
distance from your workplace.
• Provide for safe storage of the tools. The tools out of use should be stored at a dry elevated place and lock them not to be
accessed by the others.
• Use the correct tool for corresponding job.
For example, do not use small tools and
accessories for the jobs that should be
done by the big ones. Do not use the tools for purposes and works, which they have not been designed for. Keep your tools
clean and sharp.
• Wear suitable clothing. Do not wear loose clothing or jewellery, they could be caught with moving parts. When working
outdoors, rubber gloves and antiskid boots are recommended. If your hair is long, protective hairnet should be worn.
• Use personal protection equipment. Wear protective goggles and ear protectors. Wear a dustproof respirator. Always wear
tight-fitting gloves when handling sharp edges and saw discs.
• Use a dust exhauster. If dust exhaust and collection of dust devices are available, the must be fitted on and used correctly.
Make sure the dust and sawdust are taken away from you and the others standing near the unit.
• Look out for power cable. Do not pull the cable. Do not use it to unplug. Keep the cable away from the sources of heat, oil and
sharp edges.
• Effect the safety of the piece to be worked.
Use suitable clamps etc. It is always be
tter and safer than to hold it with hand. In
addition, you have both your hands free to work. .
• Mind your balance and safe posture. Never lean over too far to the side when you are trying to reach something.
• Remove any wrenches and spanners. All the wrenches and spanners used for replacing a tool, should be removed before
switching off.
• Avoid any unintentional switching on . Before plugging the unit, remember to switch it off by the unit switch.
• When working outdoors, use special extension cables only.
You need special extension cables
for the use outdoors, they
are fit to the purpose and marked appropriately.
• Be attentive at any time. Mind what you are doing. Use common sense at work. Do not use electrical tools when you feel
tired.
• Look out for damaged parts. Check the unit through before use. Are any parts da
maged? If the damage is slight only,
consider if the operation of the unit will still be safe and perfect. Mind the correct adjustment and setting of moving parts. Do
some elements fail to fit correctly in the others? Are some of them damaged? Is everything installed properly? Are any other
conditions of the unit perfect functioning met? Any damaged protective devices etc. have to be repaired or replaced by
authorised serviceman, unless otherwise stated in the operating manual. Have the defective switches replaced in an authorised
workshop. Do not use the tool, if the switch cannot be put on and off as appropriate. Replace the bench inset, if worn. In an
unlikely case that defects are found on the unit (protective devices and saw disc included), kindly consult a local servicing centre.
• Get protected from electric shock. Avoid any contact of the body with grounded parts, such as pipes,
heating radiators, stoves, and refrigerators.
• Use approved parts only. Use identical spare parts only for maintenance and repairs. Consult an authorised servicing centre.
• Warning! Use of accessories and additions other than expressly recommended in this manual may result in a risk for persons
and property.
• Caution: Use a sliding guide bar at any work.
Before putting the saw in operation, make sure that no parts are damaged and no parts and protection devices are
missing. If they were, the saw should not be operated.
Emergency Action
Apply the first aid adequate to the injury and get qualified medical assistance as quickly as possible. Protect the injured person from
more accidents and calm him/her down.
Signs on Unit
Meaning of Symbols
Symbols shown below are used throughout this manual and/or on the unit :
19

Termékspecifikációk

Márka: Güde
Kategória: Fűrészgép
Modell: TK 2400 ECO

Szüksége van segítségre?

Ha segítségre van szüksége Güde TK 2400 ECO, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók Fűrészgép Güde

Güde

Güde GSS 400 Útmutató

13 Január 2025
Güde

Güde UASA 12-201-24 Útmutató

3 Október 2024
Güde

Güde USS 1050 R Útmutató

18 Szeptember 2024
Güde

Güde TKGS 216 Útmutató

29 Augusztus 2024
Güde

Güde KS 500-62 Útmutató

25 Augusztus 2024
Güde

Güde GAK 750 B Útmutató

20 Augusztus 2024
Güde

Güde KS 400 B Útmutató

19 Augusztus 2024
Güde

Güde KS 450-53 V Útmutató

17 Augusztus 2024
Güde

Güde KS 400 E Útmutató

15 Augusztus 2024
Güde

Güde KS 450-46 Útmutató

14 Augusztus 2024

Útmutatók Fűrészgép

Legújabb útmutatók Fűrészgép

Kraftronic

Kraftronic KT-ST 550 Útmutató

30 Március 2025
Kraftronic

Kraftronic KT-US 650 Útmutató

30 Március 2025
Kraftronic

Kraftronic KT-HK 1250 Útmutató

30 Március 2025
Kraftronic

Kraftronic KT-HK 1410 Útmutató

30 Március 2025
Makita

Makita 4334DWDE Útmutató

30 Március 2025
Topex

Topex 16B282 Útmutató

29 Március 2025
Makita

Makita DCS340 Útmutató

29 Március 2025
Makita

Makita DPB181 Útmutató

29 Március 2025
Makita

Makita DPC7301 Útmutató

29 Március 2025
Makita

Makita DPC6401 Útmutató

29 Március 2025