Használati útmutató Grandstream WP820

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Grandstream WP820 (125 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 6 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/125
Grandstream Networks, Inc.
WP820
Page | 2
WP820 User Guide
Version 1.0.7.30
COPYRIGHT
©2021 Grandstream Networks, Inc. https://www.grandstream.com/
All rights reserved. Information in this document is subject to change without notice. Reproduction or
transmittal of the entire or any part, in any form or by any means, electronic or print, for any purpose without
the express written permission of Grandstream Networks, Inc. is not permitted.
The latest electronic version of this guide is available for download here:
https://www.grandstream.com/support
Grandstream is a registered trademark and Grandstream logo is trademark of Grandstream Networks, Inc.
in the United States, Europe, and other countries.
CAUTION
Changes or modications to this product not expressly approved by Grandstream, or operation of this
product in any way other than as detailed by this guide, could void your manufacturer warranty.
WARNING
Please do not use a dierent power adaptor with devices as it may cause damage to the products and void
the manufacturer warranty.
Page | 3
WP820 User Guide
Version 1.0.7.30
FCC warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) The device may not cause harmful interference, and (2) This device must accept any interference
received, including interference that may cause undesired operation.
Changes or modication not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment. This equipment has been tested and found to comply with limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and
used in accordance with instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment o
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV technician for help.
RF Radiation Exposure Statement (SAR)
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
CE Authentication
Hereby, Grandstream Networks, Inc. declares that the radio equipment WP820 is in compliance with
Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following internet address:
https://www.grandstream.com/support/resources
Page | 4
WP820 User Guide
Version 1.0.7.30
SPECIFICATION
Operating Frequency Band(RF):
BT: 2402-2480MHz(TX&RX)
BLE: 2402-2480MHz(TX&RX)
2.4GHz WIFI: 2412-2472MHz(TX&RX)
5GHz WIFI: 5150-5250MHz,5250-5350MHz,5470-5725MHz(TX&RX)
Max. Of Transmit Power:
BT: 9.55dBm
BLE: 2.45dBm
2.4GHz WIFI:
802.11b:19.78dBm;802.11g:18.12dBm;
802.11n20:18.91dBm;802.11n40:18.39dBm;
5GHz WIFI:
5150-5250MHz:
802.11a:16.93dBm;802.11n20:17.49dBm;802.11n40:16.40dBm
5250-5350MHz:
802.11a:15.69dBm;802.11n20:15.53dBm;802.11n40:15.46dBm
5470-5725MHz:
802.11a:16.42dBm;802.11n20:16.63dBm;802.11n40:15.82dBm
Page | 5
WP820 User Guide
Version 1.0.7.30
GNU GPL INFORMATION
WP820 firmware contains third-party software licensed under the GNU General Public License (GPL).
Grandstream uses software under the specific terms of the GPL. Please see the GNU General Public
License (GPL) for the exact terms and conditions of the license.
Grandstream GNU GPL related source code can be downloaded from Grandstream web site from:
https://blog.grandstream.com/faq/gnu-general-public-license/gnu-gpl-information-download
Page | 6
WP820 User Guide
Version 1.0.7.30
Table of Contents
DOCUMENT PURPOSE ............................................................................................... 17
CHANGE LOG .............................................................................................................. 18
Firmware Version 1.0.7.30 ................................................................................................................... 18
Firmware Version 1.0.7.26 ................................................................................................................... 18
Firmware Version 1.0.7.22 ................................................................................................................... 18
Firmware Version 1.0.7.15 ................................................................................................................... 18
Firmware Version 1.0.7.7 ..................................................................................................................... 18
Firmware Version 1.0.5.5 ..................................................................................................................... 18
Firmware Version 1.0.3.20 ................................................................................................................... 19
Firmware Version 1.0.3.6 ..................................................................................................................... 19
Firmware Version 1.0.3.5 ..................................................................................................................... 19
Firmware Version 1.0.1.15 ................................................................................................................... 20
Firmware Version 1.0.1.12 ................................................................................................................... 20
WELCOME ................................................................................................................... 21
PRODUCT OVERVIEW ................................................................................................ 22
Feature Highlights ................................................................................................................................ 22
Technical Specifications ....................................................................................................................... 22
GETTING STARTED ..................................................................................................... 24
Equipment Packaging .......................................................................................................................... 24
Setting up the WP820 .......................................................................................................................... 25
Charging Station ........................................................................................................................... 25
Handset ........................................................................................................................................ 25
Battery Information ....................................................................................................................... 26
WP820 Handset Keys Description ....................................................................................................... 26
WP820 Icons Description .................................................................................................................... 28
WP820 LED Status .............................................................................................................................. 30
Page | 7
WP820 User Guide
Version 1.0.7.30
WP820 Handset Menu ......................................................................................................................... 30
WP820 Keypad .................................................................................................................................... 33
QUICK SETUP WIZARD .............................................................................................. 35
WP820 WEB GUI ACCESS CONFIGURATION ........................................................... 36
Configuration via Web Browser ........................................................................................................... 36
Accessing the Web UI .................................................................................................................. 36
Web GUI Languages .................................................................................................................... 37
Saving the Configuration Changes ............................................................................................... 37
Web UI Access Level Management ..................................................................................................... 37
Changing User Level Password ................................................................................................... 37
Changing Admin Level Password ................................................................................................. 38
Changing HTTP / HTTPS Web Access Port ................................................................................. 39
BASIC OPERATIONS ................................................................................................... 41
WP820 Home Screen .......................................................................................................................... 41
Turning the Handset ON/OFF .............................................................................................................. 42
Connecting WP820 to Wi-Fi Network .................................................................................................. 42
Auto Connection ........................................................................................................................... 42
Manual connection........................................................................................................................ 42
Wi-Fi Band Configuration.............................................................................................................. 43
Wi-Fi Signal Warning Configuration ............................................................................................. 43
Wi-Fi Roaming Mode Configuration ............................................................................................. 44
Connecting WP820 to Bluetooth Devices ............................................................................................ 45
Turn On/Off Bluetooth ................................................................................................................... 45
Change Bluetooth Device Name .................................................................................................. 45
Pair WP820 with a Bluetooth Device ............................................................................................ 45
Unpair a Bluetooth Device ............................................................................................................ 46
Connect to a Bluetooth Device ..................................................................................................... 47
Connect to a Bluetooth Device from Web Interface ..................................................................... 47
Turn On/Off Bluetooth ................................................................................................................... 47
Page | 8
WP820 User Guide
Version 1.0.7.30
Change Bluetooth Device Name .................................................................................................. 47
Pair WP820 with a Bluetooth Device ............................................................................................ 48
Checking WP820 Status ...................................................................................................................... 48
WP820 Account Status ................................................................................................................. 48
WP820 Network Status ................................................................................................................49
WP820 System Info ...................................................................................................................... 50
WP820 Network Statistics ............................................................................................................ 51
WP820 Battery .............................................................................................................................. 52
Screen Lock ......................................................................................................................................... 53
Setting the Key Lock from Handset .............................................................................................. 53
Lock Screen Settings from Web GUI ............................................................................................ 53
Locking/Unlocking the Screen ...................................................................................................... 54
Configuring the LCD Brightness and Screen Timeout ......................................................................... 55
Return to Idle Screen ........................................................................................................................... 55
Register a SIP Account ........................................................................................................................ 55
Register Account via Web User Interface ..................................................................................... 55
Register Account via LCD Menu ................................................................................................... 56
Guest Login .......................................................................................................................................... 57
Configuration ................................................................................................................................ 57
User Login ....................................................................................................................................58
User Logout .................................................................................................................................. 59
PHONE SETTINGS....................................................................................................... 60
Selecting Phone Language .................................................................................................................. 60
Activate/Deactivate Hands-Free Mode ................................................................................................ 60
Muting the Microphone ........................................................................................................................ 60
Adjusting Speaker and Earpiece Volume ............................................................................................ 61
Ringtones ............................................................................................................................................. 61
Setting the Ringer Volume on the WP820 .................................................................................... 61
Setting the Ringtones on the WP820 ........................................................................................... 62
Date and Time ...................................................................................................................................... 62
Page | 9
WP820 User Guide
Version 1.0.7.30
Wallpaper Customization ..................................................................................................................... 63
Applying Uploaded Wallpaper ...................................................................................................... 66
Deleting Wallpaper ....................................................................................................................... 67
Reboot the WP820 ............................................................................................................................... 68
CALL OPERATIONS .................................................................................................... 69
Placing calls ......................................................................................................................................... 69
Make a Call using a Line .............................................................................................................. 69
Dialing from Call history ................................................................................................................ 70
Dialing from Phonebook ............................................................................................................... 71
Answering Calls ................................................................................................................................... 71
Auto Answer ......................................................................................................................................... 71
Ending Calls ......................................................................................................................................... 73
Rejecting Calls ..................................................................................................................................... 73
Call Hold/Resume ................................................................................................................................ 73
Call Waiting .......................................................................................................................................... 73
Do Not Disturb ..................................................................................................................................... 74
Call Forward ......................................................................................................................................... 74
Call Transfer ......................................................................................................................................... 76
Blind Transfer ................................................................................................................................ 76
Attended Transfer ......................................................................................................................... 76
Speed Dial ...........................................................................................................................................78
3-Way Conference ............................................................................................................................... 79
UCM Conference ................................................................................................................................. 79
Participate in UCM Conference Room ......................................................................................... 79
Conference Call Operations ......................................................................................................... 80
CEI (Conference Event Indicator) ................................................................................................. 82
Voice Mail ............................................................................................................................................. 83
Set Voice Mail ID .......................................................................................................................... 83
Play Voice Mail Messages ............................................................................................................ 84
CONTACTS................................................................................................................... 86
Page | 10
WP820 User Guide
Version 1.0.7.30
Local Contacts ..................................................................................................................................... 86
LDAP .................................................................................................................................................... 87
Groups ................................................................................................................................................. 88
Blacklist ................................................................................................................................................ 88
Broadsoft XSI ....................................................................................................................................... 89
CALL HISTORY ............................................................................................................ 90
Dial Out from Call History .................................................................................................................... 90
Call History Options ............................................................................................................................. 90
Call History Details ............................................................................................................................... 91
SMS .............................................................................................................................. 92
View SMS............................................................................................................................................. 92
Create SMS .........................................................................................................................................92
Delete SMS .......................................................................................................................................... 93
CALL FEATURES ......................................................................................................... 94
MULTI-FUNCTION BUTTON ........................................................................................ 95
PTT/Paging .......................................................................................................................................... 95
SAFE/Panic Call .................................................................................................................................. 95
Mute/Un-mute ...................................................................................................................................... 95
Speed dial ............................................................................................................................................ 95
Disable ................................................................................................................................................. 95
PTT (PUSH- -TALK) FUNCTIONALITYTO .................................................................... 96
Enabling PTT mode on the WP820 ..................................................................................................... 96
Using the PTT Functionality on the WP820 ......................................................................................... 97
PTT Configuration Settings .................................................................................................................. 98
Settings ......................................................................................................................................... 98
PTT Parameters ........................................................................................................................... 98
Group Paging ....................................................................................................................................... 99
Enabling Group Paging Feature ................................................................................................... 99
Page | 11
WP820 User Guide
Version 1.0.7.30
Group Paging Parameters .......................................................................................................... 101
IGMP Settings .................................................................................................................................... 102
SAFE/PANIC CALL .................................................................................................... 103
Safe Monitoring Features ..................................................................................................................103
Panic Call Feature ............................................................................................................................. 104
WP820 GESTURE AND INTELLIGENT CONTROL .................................................. 106
Intelligent Control ............................................................................................................................... 106
Gesture Control .................................................................................................................................. 106
Flip Phone ................................................................................................................................... 106
Pick Up .......................................................................................................................................107
CONNECTING WP820 TO GDS3710 DOOR SYSTEM ............................................. 109
DIAGNOSTICS ........................................................................................................... 110
LCD Diagnostics ................................................................................................................................ 110
LCD Off .............................................................................................................................................. 110
LED Diagnostics .................................................................................................................................111
Keypad Diagnostics ............................................................................................................................111
Audio Loopback ................................................................................................................................. 112
Acceleration Sensor ........................................................................................................................... 113
Sensor Calibration ............................................................................................................................. 113
Proximity Sensor ................................................................................................................................ 113
Vibration Diagnostics ......................................................................................................................... 114
Certificate Verification ........................................................................................................................ 114
Traceroute .......................................................................................................................................... 115
Ping .................................................................................................................................................... 115
NsLookup ........................................................................................................................................... 115
One-click Debugging.......................................................................................................................... 116
UPGRADING AND PROVISIONING .......................................................................... 118
Upgrade and Provisioning Configuration ........................................................................................... 118
Page | 12
WP820 User Guide
Version 1.0.7.30
Configure via keypad Menu ........................................................................................................ 118
Configure via Web GUI ............................................................................................................... 119
Upload Firmware Locally ................................................................................................................... 119
No Local Firmware Servers ............................................................................................................... 120
Firmware Upgrade via USB ............................................................................................................... 120
Config Provision via USB ................................................................................................................... 121
Wi-Fi Provision via USB ..................................................................................................................... 122
https://www.grandstream.com/hubfs/Product_Documentation/WiFi_provision_guide.pdf ................ 122
Provisioning and Configuration File Download .................................................................................. 122
FACTORY RESET ...................................................................................................... 123
Restore to Factory Default via LCD Menu ......................................................................................... 123
Restore to Factory Default via the Web GUI ..................................................................................... 123
Restore to Factory Default using Hard Keys ..................................................................................... 124
EXPERIENCING WP820 ENTERPRISE PORTABLE WI-FI PHONE ......................... 125
Page | 13
WP820 User Guide
Version 1.0.7.30
Table of Tables
Table 1: WP820 Features at a Glance ........................................................................................................ 22
Table 2: WP820 Technical Specifications ...................................................................................................22
Table 3: Equipment Packaging ...................................................................................................................24
Table 4: WP820 Description ........................................................................................................................ 27
Table 5: WP820 Icons Description .............................................................................................................. 28
Table 6: WP820 LED Status........................................................................................................................ 30
Table 7: WP820 Account Status Description............................................................................................... 48
Table 8: WP820 Network Status Description .............................................................................................. 49
Table 9: WP820 System Info Description .................................................................................................... 50
Table 10: WP820 Network Status Description ............................................................................................ 51
Table 11: WP820 Battery Description .........................................................................................................52
Table 12: New Contact Parameters ............................................................................................................ 87
Table 13: Call Features ............................................................................................................................... 94
Table 14: SAFE Monitoring Settings ......................................................................................................... 104
Table 15: Panic/Emergency Call Settings ................................................................................................. 105
Page | 14
WP820 User Guide
Version 1.0.7.30
Table of Figures
Figure 1: WP820 Package Content ............................................................................................................24
Figure 2: Charging Station .......................................................................................................................... 25
Figure 3: WP820 Handset Setup ................................................................................................................ 25
Figure 4: WP820 Description ...................................................................................................................... 27
Figure 5: WP820 Keypad Modes ................................................................................................................ 33
Figure 6: Setup wizard ................................................................................................................................ 35
Figure 7: WP820 Web GUI Language ........................................................................................................ 37
Figure 8: User Level Password ................................................................................................................... 38
Figure 9: Admin Level Password ................................................................................................................39
Figure 10: Web/SSH access ....................................................................................................................... 40
Figure 11: Home screen pages ................................................................................................................... 41
Figure 12: Default Wi-Fi Network ................................................................................................................ 42
Figure 13: Connecting WP820 to Wi-Fi Network ........................................................................................ 43
Figure 14: Wi-Fi Band configuration ...........................................................................................................43
Figure 15: Wi-Fi Signal Warning Sensitivity ................................................................................................ 44
Figure 16: Wi-Fi Roaming Mode ................................................................................................................. 44
Figure 17: Make calls using Bluetooth account .......................................................................................... 46
Figure 18:Pair WP820 to a Bluetooth Device ............................................................................................. 46
Figure 19: Bluetooth profile ......................................................................................................................... 47
Figure 20: Connect to a Bluetooth device ................................................................................................... 47
Figure 21: WP820 Account Status .............................................................................................................. 48
Figure 22: WP820 Network Status .............................................................................................................. 49
Figure 23: System Info ................................................................................................................................ 50
Figure 24: WP820 Network Status .............................................................................................................. 51
Figure 25: WP820 Battery ........................................................................................................................... 52
Figure 26: Keypad lock from handset ......................................................................................................... 53
Figure 27: Lock Screen Settings ................................................................................................................. 54
Figure 28: Unlock Keypad ........................................................................................................................... 54
Figure 29: LCD Display Configuration ........................................................................................................55
Figure 30: Account Status ........................................................................................................................... 56
Figure 31: SIP Accounts Configuration ....................................................................................................... 57
Figure 32: Guest Login settings .................................................................................................................. 58
Figure 33: Guest Login Window .................................................................................................................. 59
Figure 34: Guest Logout ............................................................................................................................. 59
Figure 35: Configuring Phone Language .................................................................................................... 60
Figure 36: Muting the Microphone .............................................................................................................. 61
Figure 37: Ringer Volume ........................................................................................................................... 62
Figure 38: Calls Default Ringtone ............................................................................................................... 62
Figure 39: Date and Time Settings ............................................................................................................. 63
Figure 40: Wallpaper Settings ..................................................................................................................... 64
Page | 15
WP820 User Guide
Version 1.0.7.30
Figure 41: Wallpaper - Display Mode .......................................................................................................... 64
Figure 42: Wallpaper – Uploaded ...............................................................................................................65
Figure 43: Wallpaper – Download ............................................................................................................... 65
Figure 44: Switching Wallpaper from Handset ............................................................................................ 66
Figure 45: Switching Wallpaper from Web GUI .......................................................................................... 67
Figure 46: Deleting Wallpaper ..................................................................................................................... 67
Figure 47: Reboot the WP820 ....................................................................................................................68
Figure 48: Dialing from Call History ............................................................................................................ 70
Figure 49: Dialing from Contacts List .......................................................................................................... 71
Figure 50: Auto-answer on WP820 ............................................................................................................. 72
Figure 51: Auto-answer Idle Screen ............................................................................................................ 72
Figure 52: Hold/Unhold Calls ...................................................................................................................... 73
Figure 53: Call Waiting ................................................................................................................................ 74
Figure 54: DND Enabled ............................................................................................................................. 74
Figure 55: Call Forwarding .......................................................................................................................... 75
Figure 56: Blind Transfer ............................................................................................................................. 76
Figure 57: Attended transfer options ........................................................................................................... 77
Figure 58: Attended transfer........................................................................................................................ 77
Figure 59: Split Calls ................................................................................................................................... 77
Figure 60: Speed Dial Configuration ........................................................................................................... 78
Figure 61: 3-way Conference Call ..............................................................................................................79
Figure 62: Join UCM Conference Room ..................................................................................................... 80
Figure 63: UCM Conference Participants ................................................................................................... 80
Figure 64: Send meeting invitation .............................................................................................................81
Figure 65: Kick a participant........................................................................................................................ 81
Figure 66: Member has joined notification .................................................................................................. 82
Figure 67: Member Mute notification ..........................................................................................................82
Figure 68: Member left notification .............................................................................................................. 83
Figure 69: LCD Menu - Voice Mail ID ......................................................................................................... 84
Figure 70: Web UI - Voice Mail Access Number ......................................................................................... 84
Figure 71: Playing Voicemail Messages ..................................................................................................... 85
Figure 72: Accessing Contacts.................................................................................................................... 86
Figure 73: Create a new contact ................................................................................................................. 86
Figure 74: Create New Group ..................................................................................................................... 88
Figure 75: Blacklist ...................................................................................................................................... 88
Figure 76: BS XSI Login .............................................................................................................................. 89
Figure 77: WP820 Call History .................................................................................................................... 90
Figure 78: Call History Options ................................................................................................................... 90
Figure 79: WP8200 Call History Details ...................................................................................................... 91
Figure 80: View SMS Dialog ....................................................................................................................... 92
Figure 81: Create a New Message ............................................................................................................. 92
Figure 82: send a New Message from Contact........................................................................................... 93
Page | 16
WP820 User Guide
Version 1.0.7.30
Figure 83: DIsable Multi-function button ..................................................................................................... 95
Figure 84: Enabling PTT Feature on WP820 .............................................................................................. 96
Figure 85: PPT Channel .............................................................................................................................. 97
Figure 86: PTT Call (Caller) ........................................................................................................................ 97
Figure 87: PTT Call (Callee) ....................................................................................................................... 98
Figure 88: PTT Call Release ....................................................................................................................... 98
Figure 89: Enabling Group Paging ............................................................................................................ 100
Figure 90: IGMP setting ............................................................................................................................ 102
Figure 91: Intelligent Control Features ...................................................................................................... 106
Figure 92: Flip Phone ................................................................................................................................ 107
Figure 93: WP820 Gesture Control (Flip phone) ...................................................................................... 107
Figure 94: Pick up ..................................................................................................................................... 108
Figure 95: WP820 Gesture Control (Pick up) ........................................................................................... 108
Figure 96: WP820 Connected to GDS3710 .............................................................................................. 109
Figure 97: Diagnostics APP ...................................................................................................................... 110
Figure 98: LCD Diagnostics ...................................................................................................................... 110
Figure 99: LCD Diagnostics .......................................................................................................................111
Figure 100: LED Diagnostics .....................................................................................................................111
Figure 101: keypad Diagnostics ................................................................................................................ 112
Figure 102: Audio Loopback ..................................................................................................................... 112
Figure 103: Acceleration sensor ............................................................................................................... 113
Figure 104: Sensor calibration .................................................................................................................. 113
Figure 105: Proximity sensor .................................................................................................................... 114
Figure 106: Vibration diagnostics .............................................................................................................. 114
Figure 107: Certificate Verification ............................................................................................................ 114
Figure 108: Traceroute .............................................................................................................................. 115
Figure 109: Ping ........................................................................................................................................ 115
Figure 110: NsLookup ............................................................................................................................... 116
Figure 111: one-click debugging ............................................................................................................... 116
Figure 112: select debug mode and start capture..................................................................................... 116
Figure 113: select debug mode and start capture..................................................................................... 117
Figure 114: export or delete debug file ..................................................................................................... 117
Figure 115: WP820 Upgrade Configuration via Keypad Menu ................................................................. 118
Figure 116: WP820 Upgrade Configuration via Web GUI ......................................................................... 119
Figure 117: Upload Firmware File to Update ............................................................................................ 120
Figure 118: USB disk connected ............................................................................................................... 121
Figure 119: New Firmware Detected ........................................................................................................121
Figure 120: WP820 LCD - Confirm Factory Reset ...................................................................................123
Figure 121: WP820 Web GUI - Factory Reset .......................................................................................... 123
Figure 122: WP820 Web GUI - Confirm Factory Reset ............................................................................ 124
Page | 17
WP820 User Guide
Version 1.0.7.30
DOCUMENT PURPOSE
This document describes how to use WP820 Enterprise Portable Wi- phone learn the advanced Fi . To
functions of WP820 please visit , https://www.grandstream.com/support to download the latest “WP820
Administration Guide”.
This guide covers following topics:
Product Overview
Getting Started
WP820 Web GUI Access Configuration
Basic Operations
Phone Settings
Call Operations
Contacts
Call History
SMS
Call features
Multi-Function Button
PTT (Push- -Talk) Functionalityto
SAFE/Panic Call
WP820 Gesture and Intelligent Control
Connecting WP820 to GDS3710 Door System
Upgrading and Provisioning
Factory Reset
Experiencing WP820 Enterprise Portable Wi-Fi Phone
Page | 18
WP820 User Guide
Version 1.0.7.30
CHANGE LOG
This section documents significant changes from previous firmware versions. Only major new features or
major document updates are listed here. Minor updates for corrections or editing are not documented here.
Firmware Version 1.0.7.30
Added ability to disable proximity sensor. [Intelligent Control]
Added ability to disable multi-function button completely. [Disable]
Firmware Version 1.0.7.26
Added Sensor calibration feature code ***2223*. [Sensor Calibration]
Firmware Version 1.0.7.22
Added Ability to upload custom wallpaper by server path. [Download Wallpaper]
Firmware Version 1.0.7.15
Added allow transfer calls to LDAP contacts Call Transfer]. [
Firmware Version 1.0.7.7
Added support for Finnish Hebrew language.and
Added detection for upgrade fail if speed lower than 1B/s for 120 secs for all modes.
Added ability to configure outbound proxy from LCD menu. [Register Account via LCD Menu]
Added USB icon display on status bar when USB drive is plugged. [Firmware Upgrade via USB]
Added Broadsoft XSI support. [CONTACTS]
Added “One- ck Debugging” feature on handset UI. [DIAGNOSTICS]cli
Added SN info on LCD and web UI. [WP820 System Info]
Firmware Version 1.0.5.5
Added battery status. [WP820 Battery]
Added Bluetooth interface on web UI. [Bluetooth]
Added visual voicemail function. [Voice Mail]
Added custom wallpaper support on web Wallpaper Customization]UI. [
Added Wi-Fi provision via USB. [ -Fi Provision via USB]Wi
Added config file provision via USB. [Config Provision via USB]
Added lock screen feature from web UI and screen lock password. [Screen Lock]
Added UCM conference screen to show participants count info. [UCM Conference]
Added send message in contacts UI. [SMS]
Added speed dial option for multi-purpose key. [MULTI-FUNCTION BUTTON]
Page | 19
WP820 User Guide
Version 1.0.7.30
Added phone support for clicking ok button to accept call.
Firmware Version 1.0.3.20
Added video call zoom function in door system integration feature with GDS. [CONNECTING WP820
TO GDS3710 DOOR SYSTEM]
Added ability to enable/disable SSH access without requiring reboot. [Web/SSH Access]
Added support for UCM conference control. [UCM Conference]
Added support for quick search mode in contacts application. [CONTACTS]
Added ability to disable web UI access. [Accessing the Web UI]
Added ability to disable Low Wi-Fi signal warning. [ -Fi Signal Warning Configuration]Wi
Added quick setup wizard module. [QUICK SETUP WIZARD]
Updated attended transfer confirmation msg. [Attended Transfer]
Increased dial digit limit to 30 characters. [Placing calls]
Removed “Personalized Account” menu and moved related options to Settings Call settings. [WP820
Handset Menu]
Added Wi-Fi restart when changed Wi-Fi frequency. [ -Fi Band Configuration]Wi
Added support for connected Bluetooth device display. [Connecting WP820 to Bluetooth Devices]
Added Bluetooth headset mode support. [Connecting WP820 to Bluetooth Devices]
Updated device LCD language supported list. [Selecting Phone Language]
Updated SMS interface. [SMS]
Add 2 second delay when detect flip to reject call. [Flip Phone]
Updated factory reset using hard key interface when constraint mode enabled. [Restore to Factory
Default using Hard Keys]
Added support for factory reset first unregister sip message without contact head. to
[ https://www.grandstream.com/hubfs/Product_Documentation/gs_provisioning_guide.pdf
FACTORY RESET]
Updated SRTP icon to display only when signaling and media are both encrypted. [WP820 Icons
Description]
Firmware Version 1.0.3.6
Changed voicemail notification from “Ordinary” to “Normal”. [WP820 Icons Description]
Firmware Version 1.0.3.5
Supported TLSv1.2. [Technical Specifications]
Added Slovak language support on LCD display. [Technical Specifications]
Added warning tone when device is low on battery. [Battery Information]
Added auto bootup when placed on charger after an abnormal power off. [Battery Information]
Added Calculator application. [WP820 Handset Menu]
Added additional Home screen on the left and the right. [WP820 Home Screen]
Added support for captive portal. [Manual connection]
Page | 20
WP820 User Guide
Version 1.0.7.30
Added Wi-Fi Band selection. [ -Fi Band Configuration]Wi
Added warning and message prompt when -Fi signal is weak. [ -Fi Signal Warning Configuration]Wi Wi
Added beep tone during a call when Wi-Fi connection is lost. [ -Fi Signal Warning Configuration]Wi
Added support for captive portal. [ -Fi Roaming Mode Configuration]Wi
Improved time and date display for different format. [Date and Time]
Added support for troubleshooting tools. [Diagnostics]
Changed incoming call softkey options from “Accept, Transfer, Reject” to “Accept, Transfer, Mute” for
user friendly purpose. [CALL OPERATIONS]
Added stutter tone at dialing interface when account has un-read voicemails. [Voice Mail]
Added support for quick conference during call. [3-Way Conference]
Increased contacts max limit count to 1000. [CONTACTS]
Improved SMS UI and UX. [SMS]
Added prompt for message sending status after users click on “Send”. [SMS]
Added setting IGMP Keep Alive for PTT/Paging feature. [IGMP Settings]
Add support for SAFE/Panic Call mode. [SAFE/PANIC CALL]
Added Gesture Control features. [Gesture Control]
Improved Phone User interface for user friendly purpose.
Firmware Version 1.0.1.15
Adding show storage status in System Info. [WP820 System Info]
Firmware Version 1.0.1.12
This is the initial version for WP820.
Page | 21
WP820 User Guide
Version 1.0.7.30
WELCOME
Thank you for purchasing Grandstream WP820. This powerful Enterprise Portable Wi-Fi Phone features
dual-band 802.11a/b/g/n Wi-Fi, supports Wi-Fi roaming, and integrated Bluetooth. The combination of
advanced telephony features and durability make it ideal for mobilizing your VoIP network in residences,
warehouses, retail stores, hotels and many more environments. Due to a durable design, this sleek phone
is drop safe from 1.2 meters, with 150 hours standby time and 7.5 hours talk time making it an ideal addition
for homes and businesses alike.
Page | 22
WP820 User Guide
Version 1.0.7.30
PRODUCT OVERVIEW
Feature Highlights
The following table contain the major features of the WP820:
Table 1 WP820 Features at a Glance:
Technical Specifications
The following table resumes all the technical specifications including the protocols/standards supported,
voice codecs, telephony features, languages, and upgrade/provisioning settings for the Base station
WP820.
Table 2 WP820 Technical Specifications:
Protocols/Standards
SIP RFC3261, TCP/IP/UDP, RTP/RTCP, HTTP/HTTPS, ARP, ICMP, DNS (A
record, SRV,NAPTR), DHCP, SSH, TFTP, NTP, STUN, SIMPLE, LDAP, TR-069,
802.1x, TLS, SRTP, IPv6
Voice Codecs and
Capabilities
Support for G.711 a, G.729A/B, G.722 (wide-band), iLBC, Opus, in-band, and μ/
out of- -band DTMF (In audio, RFC2833, SIP INFO), VAD, CNG, AEC, PLC, AJB,
AGC, ANS
Wi-Fi
Yes, integrated dual-band Wi-Fi 802.11 a/b/g/n (2.4GHz & 5GHz)
Wi-Fi Encryption
WEP, WPA/WPA2, WPA Enterprise
Graphic Display
2.4-inch (240x320) TFT color LCD
Peripherals
3 soft keys, dial, hang up, speakerphone, phonebook, backlit keypad, proximity
sensor, accelerator, vibration motor, volume button and navigation keys
Push- -Talkto
Customizable button for push- -talk, panic call and other related functionsto
Bluetooth
Yes, Bluetooth v4.2
Auxiliary Ports
3.5 mm headset jack, Micro-USB port for charging, dual-MIC, dual-color LED.
WP820
2 SIP accounts and 2 lines.
3-way audio conference calls.
Dual-band 802.11a/b/g/n Wi-Fi.
Wi-Fi roaming and integrated Bluetooth.
150 hours standby time.
7.5 hours talk time.
Page | 23
WP820 User Guide
Version 1.0.7.30
Telephony Features
Hold, transfer, forward, 3-way audio conference, downloadable phonebook (XML,
up to 1000 items), call waiting, call log (up to 100 records), off-hook auto dial, auto
answer, click- -dial, flexible dial plan, hot desking, personalized music ringtones to
and music on hold, server redundancy and fail-over, push to talk
Security
User and administrator level passwords, MD5 and MD5-sess based authentication,
256-bit AES based secure configuration file, SRTP, TLS, 802.1x media access
control
HD Audio
Yes, both on handset and speakerphone with support for wideband audio, HAC
supported
QoS
802.11e (WMM) and Layer 3 (ToS, DiffServ, MPLS) QoS
Multi-language
English, Arabic, Chinese, Czech, Dutch, German, French, Hebrew, Italian,
Japanese, Polish, Portuguese, Russian, Spanish, Turkish and more
Upgrade/
Provisioning
Firmware upgrade via TFTP/HTTP/HTTPS, manual upload, mass provisioning
using TR-069 or encrypted XML configuration file, manual upload, USB upgrade
Power & Green
Energy Efficiency
Universal power adapter included
Input: 100-240VAC; Output: +5VDC, 1A (5W)
1500mA Li-ion battery, 150h standby time and 7.5h talk time
Physical
Handset dimensions: 168.5 x 52.5 x 21.8mm
Charger cradle dimensions : 76 x 73 x 81mm
Handset weight: 161g
Handset package weight (not including QIG): 456g
Temperature and
Humidity
Operating Temperature: 0~45°C; Operating Humidity: 10~90%(non-condensing)
Storage Temperature: -20~60°C; Storage Temperature:10~90%(non-condensing
Package Contents
Handset unit, universal power supply, charger cradle, belt clip, 1 Li-ion battery,
Quick Installation Guide.
Durability
Drop-safe from 1.2 meters height
Compliance
FCC, CE, RCM
Page | 24
WP820 User Guide
Version 1.0.7.30
GETTING STARTED
This chapter provides basic installation instructions including the list of the packaging contents and also
information for obtaining best performance with the WP820.
Equipment Packaging
Table 3: Equipment Packaging
Figure 1 WP820 Package Content:
Note: Check the package before installation. If you find anything missing, contact your system administrator.
WP820
1x Handset unit
1x Universal power supply 5V
1x Charger cradle
1x Belt clip
1x Rechargeable battery
1x Quick Installation Guide
1x GPL Statement
Page | 25
WP820 User Guide
Version 1.0.7.30
Setting up the WP820
Charging Station
Plug the power adapter into a power source socket to start using the charging station.
Figure 2: Charging Station
Handset
Please refer to the following steps in order to setup your WP820:
1. Open the battery cover.
2. Insert the battery with the electrodes in the bottom left corner.
3. Close the battery cover.
Note: Please charge the battery fully before using the handset for the first time. (For more information about
the battery, please refer to .Battery Information
Figure 3 WP820 Handset Setup:
Page | 26
WP820 User Guide
Version 1.0.7.30
Battery Information
Technology: Rechargeable Li-ion Battery
Voltage: 3.8V (Nominal Voltage 3.8V / Limited charge Voltage: 4.35 V)
Capacity: 1500mAh
Standby time: up to 150 hours
Talk time: up to 7.5 hours’ active talk time
In order to get the best performance of your WP820, we recommend using original battery provided in the
package. The specifications may differ depending on the age and capacity of the battery used.
Notes:
WP820 Wi-Fi phone generates a warning tone when devices battery level becomes 15% and 5%.
WP820 auto boots up once placed on charger when device was powered off abnormally (Battery
too low, battery removed suddenly, etc..).
Important Note: Be careful when inserting the battery into your handset to avoid any risk of short-circuit,
which lead to damage your battery and/or the handset itself. Do not use damaged batteries which can
increase the risk of serious harm.
WP820 Handset Keys Description
The WP820 enhances communication and combines usability and scalability in industries such as
warehousing, catering, and retail as well as in factory settings. The following screenshot describe the
WP820 LCD screen and the main hardware components.
Page | 27
WP820 User Guide
Version 1.0.7.30
Figure 4 WP820 Description:
The following table describes WP820 keypad keys.the
Table 4 WP820 Description:
Description
1.
The proximity senor can detect the presence of a human ear.
This sensing is done for two purposes: Reduce display power
consumption by turning off the LCD backlight and to avoid inadvertent
touches.
2.
Delivers audio output.
3,4
Configure the handset and ringtone volume.
5.
PTT (Push- -Talk) button to initiate PTT call.to
Note: PTT button can also be configured from Web GUI to have other
functions such as: SAFE/Panic Call & Mute/Unmute during calls.
Page | 28
WP820 User Guide
Version 1.0.7.30
6.
Switches between Handset and Hands-free / Speaker modes.
7.
Allows navigation of the cursor through the displayed menu options.
8.
Enters dialing mode, or dials number entered.
9.
Provides the digits, letters, and special characters in context-sensitive
applications. For + sign, press and hold key 0.
10.
Activates or deactivates the mute feature when keep pressing on *
in idle screen.
11.
1dual-color LED indicator indicating: power, call, battery, message
waiting …
12.
Phone connector for the headphones/headsets.
13.
2.4-inch (240x320) TFT color LCD
14.
Correspond to functions displayed on the LCD. These functions
change depending on the current context, and they can be
customized on Home screen and Call screen from the Web GUI.
15.
Access to contacts list.
16.
Selects the option chosen by the cursor or enters the main menu from
the home screen.
17.
Terminates calls or turns the handset on / off.
18.
Locks keypad against unintentional entries when keep pressing #.
Press and hold # key for approximately 2 seconds to lock the keys.
Press softkey and then to unlock the keys.Unlock #
19.
Picks up audio earpiece and hands-free calls.
WP820 Icons Description
Following table contains description of each icon that might be displayed on the screen of the WP820.
Table 5 WP820 Icons Description:
Battery status
Charging
Wi-Fi not enabled/configured
Wi-Fi signal status
Page | 29
WP820 User Guide
Version 1.0.7.30
Note: SRTP & TLS enabled icon will be displayed only in case signaling and media are both encrypted.
Speaker enabled icon
Ringtone status
Outgoing Call notification
Missed Call notification
Incoming Call notification
Voicemail notification (Urgent)
Voicemail notification (Normal)
Mute enabled icon
DND enabled icon
Bluetooth enabled icon
Bluetooth connected icon
SRTP & TLS enabled icon
Contacts
SMS
Call History
Voice Mail
Diagnostics
Settings
Applications
Status
Broadsoft XSI
Page | 30
WP820 User Guide
Version 1.0.7.30
WP820 LED Status
Table 6 WP820 LED Status:
Red Fast Flashing
Upgrading
Green Slow
Flashing
Incoming call
Green Blinking
Charging but not full
Green Solid
Charging (full)
Red Slow Flashing
Missed call (s)
New voicemail (s)
New SIP Message (s)
Red Solid
Network disconnected
LED OFF
Normal
WP820 Handset Menu
The handset has an easy- -use menu structure. Every menu opens a list of options. To open the main to
menu, unlock first the handset and press “Menu” (softkey in the middle). Press Arrow keys to navigate to
the menu option you require. Then press Select” (left softkey) or access further OK/Selection key to
options or confirm the setting displayed.
To go to the previous menu item, press Back” (right softkey). You can press key at any time to Power
cancel and return to standby mode.
Page | 31
WP820 User Guide
Version 1.0.7.30
Account
Call settings
Network settings
Bluetooth settings
Basic settings
Advanced Settings
Options
Search
Contacts
Call History
SMS
Voice Mail
Diagnostics
Settings
Applications
Broadsoft
XSI
Status
All
Missed
Outgoing
Incoming
Urgent
Normal
LCD diagnosis
LCD off
LED diagnosis
Keypad diagnosis
Audio loopback
Acceleration sensor
Sensor Calibration
Proximity sensor
Vibrator
Certificate Verification
Traceroute
Ping
NSLookup
One-Click Debugging
Preferred Internet
Protocol
Wi-Fi
Wi-Fi Band
Wi-Fi Settings
Wi-Fi Signal Warning
Wi-Fi Roaming Mode
Bluetooth
Bluetooth Settings
Additional Network
Settings
Sound
Display
Gestures
Button Customization
Date and time
Language
System Upgrade
PTT/Paging
SAFE/Panic Call
Syslog
System Security
Factory Reset
Reboot
Alarm
Calculator
Account Status
Network Status
System Info
Network statistics
Battery
Options
New
Page | 32
WP820 User Guide
Version 1.0.7.30
Contacts
Display the list of the registered contacts and also the groups contacts with the ability
of searching, adding, or editing the entries and also deleting the selected contacts.
The maximum number of contacts is 1000.
Call History
Display the call history: or Missed Calls, Accepted Calls, Outgoing Calls All
Calls. You can add contacts to directly from call logs. Shared Contacts
SMS
SMS stands for Short Message Service and referred to as a "text message". With
a SMS, you can send a message by pressing of up to 160 characters to “New”
another device or check the received ones.
Voice Mail
Play Message: Play voice mail messages received.
Set Voice Mail: Configure voice mail parameters.
Diagnostics
LCD diagnosis
LCD off
LED diagnosis
Keypad diagnosis
Audio loopback
Acceleration sensor
Sensor calibration
Proximity sensor
Vibrator
Certificate Verification
Traceroute
Ping
NSLookup
One-click Debugging
Settings
Account
Configure/View SIP accounts settings and account ringtone.
Call settings
Configure the account auto answer, call forward, DND and speed dial settings.
Network Settings
Configure the networks settings including Wi-Fi settings and additional networks
settings.
Bluetooth Settings
Configure the Bluetooth settings including discovery, pairing and connection
actions.
Basic Settings
Configure the basic settings including voice settings, display settings, Gestures
and button customization, language settings and date/time settings.
Advanced Settings
Configure the advanced settings including system upgrade, PTT/Paging
Page | 33
WP820 User Guide
Version 1.0.7.30
settings, system security settings, syslog settings factory reset / rebootand .
Applications
Alarm Clock: Configures the alarm clock settings
Calculator: performs arithmetic operations on numbers.
Broadsoft XSI
Broadsoft account.
Status
Displays account status, system info, Network status and network statistics
Account status.
Network status:
Press to enter the sub menu for MAC address, IP setting information
(DHCP/Static IP), IPv4 address, IPv6 address, Subnet Mask, Gateway; DNS
server and VPN.
System Info:
Press to enter the sub menu for Running memory, Storage status, MAC address,
System version, Recovery version, U-boot version, Kernel version, Hardware
version, PN number, Country code and Running time.
Network Statistics:
Press to enter the sub menu for Network SSID, BSSID, IP address, Signal
strength, Connection speed, Channel, Frequency, Tx packets, Tx error packets,
Tx error rate, Tx drop packets, Tx drop rate, Rx packets, Rx error packets, Rx
error rate, Rx drop packets, Rx drop rate.
Battery:
Displays the battery status and the battery usage details.
WP820 Keypad
The WP820 keypad can be used by tapping on an input field. WP820 keypad has modes “ABCabc2”, 4
“ABC”, “abc” and “123”. Default mode is “ABCabc2”. If the input field is accepting only digits, only Note:
“123” mode will be available.
Figure 5 WP820 Keypad Modes:
ABCabc2” Mode:
This mode allows to enter capital letters, small letters, digits, and symbolic characters.
Following table describes allowed characters for each key.
Page | 34
WP820 User Guide
Version 1.0.7.30
Key
Description
Key
Description
Key
Description
1
. , ? ! - 1
2
A B C a b c 2
3
D E F d e f 3
4
G H I g h i 4
5
J K L j k l 5
6
M N O m n o 6
7
P Q R S p q r s 7
8
T U V t u v 8
9
W X Y Z w x y z 9
*
. , ? ! - ( ) @ / : _ ; + %
* = < > $ [ ] { } \ ~ ^ # | ` &
0
Space
#
Switch mode
“ABC” Mode:
This mode allows to enter capital letters, digits, and symbolic characters.
Following table describes allowed characters for each key.
Key
Description
Key
Description
Key
Description
1
. , ? ! - 1
2
A B C 2
3
D E F 3
4
G H I 4
5
J K L 5
6
M N O 6
7
P Q R S 7
8
T U V 8
9
W X Y Z 9
*
. , ? ! - ( ) @ / : _ ; + %
* = < > $ [ ] { } \ ~ ^ # | ` &
0
Space
#
Switch mode
“abc” Mode:
This mode allows to enter small letters, digits, and symbolic characters.
Following table describes allowed characters for each key.
Key
Description
Key
Description
Key
Description
1
. , ? ! - 1
2
a b c 2
3
d e f 3
4
g h i 4
5
j k l 5
6
m n o 6
7
p q r s 7
8
t u v 8
9
w x y z 9
*
. , ? ! - ( ) @ / : _ ; + %
* = < > $ [ ] { } \ ~ ^ # | ` &
0
Space
#
Switch mode
“123” Mode: This mode allows to enter digits and . only.
Following table describes allowed characters for each key.
Key
Description
Key
Description
Key
Description
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
9
9
*
.
0
0
#
Switch mode
Tips using the keypad:
To switch between the modes, users could press the middle softkey or # key.
Press multiple times on same key to move forward between the allowed characters.
Use Right/Left arrow keys to change the cursors position on the text entered.
Page | 35
WP820 User Guide
Version 1.0.7.30
QUICK SETUP WIZARD
The WP820 offers a Setup Wizard tool to help users to quickly configure basic settings on the device such
as language, time zone, -Fi, and SIP account. The setup wizard appears automatically upon initial boot Wi
up of a factory default device.
Figure 6: Setup wizard
Page | 36
WP820 User Guide
Version 1.0.7.30
WP820 WEB GUI ACCESS CONFIGURATION
The WP820 can be configured using:
Web GUI embedded on the WP820 using PC's web browser.
LCD Configuration Menu using the WP820 keypad.
Note: From the Web GUI, you can configure all the functions supported by the WP820; while via keypad
menu, you can access limited configuration.
Configuration via Web Browser
The WP820 embedded Web server responds to HTTP/HTTPS GET/POST requests. Embedded HTML
pages allow a user to configure the WP820 through a Web browser such as Google Chrome, Mozilla Firefox.
Note: Please note that Microsoft's IE 9 and below are not supported, also the records from the web cannot
be played with IE10, Edge and Safari. We highly recommend using Google Chrome or Mozilla Firefox.
Accessing the Web UI
1. Connect the computer to the same network as WP820.
2. Make sure the WP820 is booted up and powered correctly.
3. You may check WP820 IP address via a subscribed WP820 on its LCD menu Settings Network
Status. Please see [ ]WP820 Network Status
4. Open Web browser on your computer and enter the WP820 IP address in the address bar of the
browser.
5. Enter the administrators username and password to access the Web Configuration Menu.
Notes:
- The computer must be connected to the same sub-network as the WP820. This can be easily done
by connecting the computer to the same hub or switch as the WP820.
- The default administrator username and password are “admin”; the default end-user username is
“user“ and the password is “123”.
- If ‘Disable web UI access’ Advanced settings System securityparameter is enabled under
;
web UI access will be disabled.
Page | 37
WP820 User Guide
Version 1.0.7.30
Web GUI Languages
Currently the WP820 web GUI supports English, Chinese languages.
Users can select the displayed language in web GUI login page, or at the upper right of the web GUI after
logging in
Figure 7 WP820 Web GUI Language:
Saving the Configuration Changes
When changing any settings, always submit them by pressing and buttons. If using the Save Apply Save
button, after making all the changes, click on the button on top of the page to submit. Apply
Web UI Access Level Management
There are two default passwords for the login page:
User Level
Username
Password
Web Pages Allowed
End User Level
user
123
Only Status, Phone Settings, System
Settings, Maintenance and System
Application with limited options.
Administrator Level
admin
admin
All pages
Changing User Level Password
1. Access the Web GUI of your WP820 using the admin’s username and password. (Default
username and password are: admin/admin).
2. Press to access your settings.Login
3. Go to System Settings
→ Security Settings.
4. In User Info Management user password , locate section:
Page | 38
WP820 User Guide
Version 1.0.7.30
a. Type in the admin password in the field.Current Admin Password
b. Type in your new user password in field.New User Password
c. Type in again same entered password in field.Confirm New User Password
5. Press and buttons to save your new settings.Save Apply
Figure 8: User Level Password
Notes:
DO NOT USE same password for both user and admin accounts.
The password is case sensitive with maximum length of 25 characters.
Changing Admin Level Password
1. Access the Web GUI of your WP820 using the admin’s username and password. (Default
username and password is: admin/admin).
2. Press to access your settings.Login
3. Go to System Settings
→ Security Settings.
4. In User Info Management admin password , locate section:
a. Type in the admin password in the fieldCurrent Admin Password
b. Type in your new user password in field.New Admin Password
c. Type in again same entered password in field.Confirm New Admin Password
5. Press and buttons to save your new settings.Save plyAp
Page | 39
WP820 User Guide
Version 1.0.7.30
Figure 9: Admin Level Password
Notes:
DO NOT USE same password for both user and admin accounts.
The password is case sensitive with maximum length of 25 characters.
Changing HTTP / HTTPS Web Access Port
1. Access the Web GUI of your WP820 using the admin’s username and password. (Default
username and password are: admin/admin).
2. Press to access your settings.Login
3. Go to System Settings
→ Security Settings.
4. In Web/SSH Access page, select the access method depending on desired protocol (HTTP or
HTTPS)
5. Locate field and change it to your desired/new HTTP / HTTPS port.HTTP / HTTPS Web Port
Note: By default, the HTTP port is 80 and HTTPS is 443.
6. Press and buttons to save your new settings.Save Apply
Note: After modifying the connection method or port, the web GUI will be automatically logged out and
redirected to the new address
Page | 40
WP820 User Guide
Version 1.0.7.30
Figure : Web/SSH access10
Page | 41
WP820 User Guide
Version 1.0.7.30
BASIC OPERATIONS
WP820 Home Screen
The WP820 Home screen comprises three pages that make it easy for the customer to access some
settings, parameters, or notifications. Please refer to the following screenshots:
Figure : Home screen pages11
Left Home Screen Page:
This page lists all the notifications that users need to check: Missed calls, unread SMS, unread
Voice mails, etc …
Users can access the notification by tapping on OK button, delete the notification by tapping on the
left softkey or clear all the notifications by tapping on the middle softkey.
Middle Home Screen Page:
The middle page of Home screen shows date/time and the registered SIP account(s) on the
WP820.
Users can access by default to History, Menu or Setting by using softkeys, and Administrator is
able to change the functions of softkeys on Home screen from the Web GUI.
Right Home Screen Page:
The right page is providing the users quick access to Wi-Fi, Bluetooth and DND option and
configuration.
Users can turn on/off the option using the middle softkey, while they also can access to the settings
of each option by tapping on the left softkey.
Page | 42
WP820 User Guide
Version 1.0.7.30
Turning the Handset ON/OFF
To turn ON the handset Power key: Long press on until the LCD screen lights up.
To turn OFF the handset Power ke: Long press on y again when the handset is idle and press
the softkey to choose to power off or reboot.
Connecting WP820 to Wi-Fi Network
Auto Connection
For easy deployment, WP820 out of the box is preconfigured to connect to a default SSID named
wp_master with a password (WPA/WPA2 PSK) equal to users can adapt these settings wp!987@dmin,
from the web UI as well to make it easier for deployment on customer site.
Go under the web interface of the “ Network Settings Wi-Fi Settings Wi-Fi Security”.
Figure : Default Wi-Fi Network12
For example, the user can pre-configure the WP to automatically connect to the Wi-Fi network at the client
site, making it easier for the client to use the phone without going through the setting up manually the Wi-
Fi network. Also, the client could have the SSID hidden by default, and the WP820 handset would still be
able to connect to the Wi-Fi network since they have SSID and password information configured.
Manual connection
The WP820 supports dual-band 802.11a/b/g/n Wi-Fi, please refer to the following steps in order to connect
your WP820 to the Wi-Fi networks:
1. On LCD menu, press Menu key and navigate to - .Settings Network Settings Wi Fi
2. Set Wi-Fi to “On “ and navigate to “Wi-Fi Settings “. A list of Wi-Fi networks will be displayed.
3. Select the desired network to connect to. (Enter the correct password to connect if requested)
WP820 will display Wi-Fi icon on the main LCD menu if the connection to the Wi-Fi network is successful.
Page | 43
WP820 User Guide
Version 1.0.7.30
Figure : Connecting WP820 to Wi-Fi Network13
Note: WP820 supports connection to Wi-Fi with captive portal enabled that requires additional credentials
to sign up or login before it is allowed to use Wi-Fi.
Wi-Fi Band Configuration
If 5GHz and 2.4Ghz are both available, the WP820 will use 5GHz, but it may switch to 2.4GHz if the signal
of 5GHz is poor. Users may also specify the Wi-Fi Band in order to fix it or to keep it Dual Band under
Settings Network Settings -Fi Band
Wi .
Figure : Wi-Fi Band configuration14
Note: Wi-Fi will restart after changing WI-FI frequency.
Wi-Fi Signal Warning Configuration
Users Can configure Wi-Fi signal warning sensitivity or disable it under Settings Network Settings -
Wi
Fi signal warning. Five sensitivity levels are available: Level 1 is the lowest and level 5 is the highest.
Page | 44
WP820 User Guide
Version 1.0.7.30
Figure : Wi-Fi Signal Warning Sensitivity15
Note: A message prompt also appears to notify users abo poor Wi-Fi signal. While during the call, a beep ut
tone will be played to notify users that Wi-Fi connection is lost.
Wi-Fi Roaming Mode Configuration
Wi-Fi Roaming settings configuration can also be done by users under Settings Network Settings -
Wi
Fi Roaming Mode.
Figure : Wi-Fi Roaming Mode16
The options that can be configured under “Wi-Fi Roaming Mode” are the following:
- Signal Threshold: When the Wi-Fi signal strength of the device drops below this value, the device
will scan for a hotspot above the threshold value and connect to it. The default setting is -70.
- Good Signal Scan Interval: The time interval for signal scanning when the Wi-Fi signal strength is
higher than the signal threshold. The default setting is 600s.
- Poor Signal Scan Interval: The time interval for signal scanning when the Wi-Fi signal strength is
lower than the signal threshold and there is no hotspot which is higher than the current signal strength.
The default setting is 5s.
Page | 45
WP820 User Guide
Version 1.0.7.30
Connecting WP820 to Bluetooth Devices
Bluetooth is a proprietary, open wireless technology standard for exchanging data over short distances
from fixed and mobile devices, creating personal area networks with high levels of security. The WP820
supports Bluetooth version 4.2.
To connect to a Bluetooth device, turn on the WP820’s Bluetooth radio first. The first time when using a
new Bluetooth device with the WP820, "pair" the device with WP820 so that both devices know how to
connect securely to each other. After that, users could simply connect to a paired device. Turn off Bluetooth
if it is not used.
Bluetooth settings are under WP820's Settings Network Settings Bluetooth Settings.
Turn On/Off Bluetooth
1. Go to WP820's Settings Network Settings Bluetooth.
2. Turn or Off the Bluetooth option. On
Change Bluetooth Device Name
The WP820 uses "WP820_XXXXXX" as Bluetooth device name by default where “XXXXXX” are the last 6
digits of the phone’s Bluetooth MAC address plus 1. The device name will be visible to other devices when
connecting them. Follow the steps below to change the name:
1. Go to WP820's Settings Network Settings Bluetooth
2. Turn on . Bluetooth
3. Go to WP820's Settings Network Settings Bluetooth Settings.
4. Press "Device name".
5. Enter a name and tap on "Save”
Pair WP820 with a Bluetooth Device
Before connecting the WP820 with other Bluetooth device, users must pair them first. They will stay paired
afterwards unless they are unpaired.
1. Go to WP820's Settings Network Settings Bluetooth.
2. Turn on . Bluetooth
3. Go to WP820's Settings Network Settings Bluetooth Settings Visible to nearby and set “
Bluetooth devices” to ON and set the Visibility timeout settings to make the WP820 phone visible to
all nearby Bluetooth devices.
Page | 46
WP820 User Guide
Version 1.0.7.30
4. Set the parameter to ON in order to allow Bluetooth headset mode the WP820 to pair with other
Bluetooth mobile devices to make calls. After success pairing, users can press the call key and then ful
press “Accounts” to select the Bluetooth account.
5. Access the and press on softkey, the WP820 will scan and Bluetooth devices settings Refresh
display the IDs of all available Bluetooth devices in range. If the device you would like to pair with does
not show up in the list (available devices), ensure that the other device is turned on and set to be
discoverable.
Once the Bluetooth device shows up in the result, press on it and specify if you want to allow it to access
your contacts and call history then press on . Confirm the passkey in the prompted message (if any). Pair
Unpair a Bluetooth Device
1. In the Bluetooth devices settings Paired devices, select, and press on the already paired Bluetooth
device name you want to unpair.
2. Press on . Unpair
Figure :Pair WP820 to a Bluetooth Device18
Figure : Make calls using Bluetooth account17
Page | 47
WP820 User Guide
Version 1.0.7.30
Connect to a Bluetooth Device
1. In the Bluetooth devices Paired devices settings , select the paired device you want to connect to.
2. Press on Connect.
The Bluetooth connected device devices menu. s name will be showing in the Bluetooth
Connect to a Bluetooth Device from Web Interface
Turn On/Off Bluetooth
1. Go to WP820's GUI Network Settings Bluetooth.
2. Turn On or O the Bluetooth option.
Change Bluetooth Device Name
The WP820 uses "WP820_XXXXXX" as Bluetooth device name by default where “XXXXXX” are the last 6
digits of the phone’s Bluetooth MAC address plus 1. The device name will be visible to other devices when
connecting them. Follow the steps below to change the name:
1. Go to WP820's GUI Network Settings Bluetooth
2. Change the . "Device name" then click on "Save”
Figure : Connect to a Bluetooth device20
Figure : Bluetooth profile19
Page | 48
WP820 User Guide
Version 1.0.7.30
Pair WP820 with a Bluetooth Device
Before connecting the WP820 with other Bluetooth device, users must pair them rst. They will stay paired
afterwards unless they are unpaired.
1. Go to WP820's GUI Network Settings Bluetooth.→ →
2. Turn on . Bluetooth
3. ress Scan. Enable “Bluetooth Headset Mode” and p
4. Select device from the discovered list and then click and enter the key PIN on the “save” then Pair
paired device.
Checking WP820 Status
WP820 Account Status
To check the SIP accounts status, follow these steps:
1. Press key to bring up operation menu.Menu
2. Use arrow keys to Reach menu and navigate to .Status Account status
Figure : WP820 Account Status21
The following information will be displayed:
Table 7: WP820 Account Status Description
Item
Description
Account 1
Displays the information about the first account including name, number,
and the status of its registration.
Account 2
Displays the information about the second account including name,
number, and the status of its registration.
Page | 49
WP820 User Guide
Version 1.0.7.30
WP820 Network Status
To check the handset network information status, follow these steps:
1. Press key to bring up operation menu.Menu
2. Use arrow keys to reach menu and navigate to Status Network Status.
Figure : WP820 Network Status22
Table 8: WP820 Network Status Description
Item
Description
IPv4 information
IPv4 Address Type
Displays the IPv4 address type.
IPv4 Address
Displays the IPv4 address.
Subnet mask
Displays the subnet mask address.
Default router
Displays the IPv4 address of the router.
DNS Server 1
Displays the IPv4 address of the primary DNS Server.
DNS Server 2
Displays the IPv4 address of the secondary DNS Server.
IPv6 information
IPv6 Address Type
Displays the IPv6 address type.
IPv6 Address
Displays the IPv6 address.
DNS Server 1
Displays the IPv6 address of the primary DNS Server.
DNS Server 1
Displays the IPv6 address of the secondary DNS Server.
Page | 50
WP820 User Guide
Version 1.0.7.30
Other Network Information
MAC address
Displays the handset’s MAC address.
NAT Type
Displays the NAT type.
VPN
VPN address
Displays the VPN IPv4 address.
WP820 System Info
To check the system info, follow these steps:
1. Press key to bring up operation menuMenu
2. Use arrow keys to reach menu and navigate to sectionStatus System Info .
Figure : System Info23
The following information will be displayed:
Table 9: WP820 System Info Description
Item
Description
Running Memory
Displays information about the memory.
Total Storage
Displays information about the storage space on the phone.
MAC Address
Displays the MAC Address of the phone.
System Version
Displays the current firmware version installed.
Recovery Version
Displays the recovery version installed.
U- Versionboot
Displays the u-boot version installed.
Kernel Version
Displays the kernel version installed.
Page | 51
WP820 User Guide
Version 1.0.7.30
Hardware Version
Displays the hardware version.
LCD_SN
Displays the LCD serial number.
DDR_SN
Displays the DDR serial number.
FCT_SN
Displays the FCT serial number.
SN
Displays the unit’s serial number.
PN Number
Displays the Part Number.
Country code
Displays the country code.
Running Time
Displays the time during which the WP820 is powered on and working.
WP820 Network Statistics
To check the handset network information status, follow these steps:
1. Press key to bring up operation menu.Menu
2. Use arrow keys to reach menu and navigate to Status Network Statistics.
Figure WP820 Network Status24:
The following information will be displayed:
Table : WP820 Network Status Description10
Item
Description
Network SSID
Displays the SSID Name on which the handset is connected.
BSSID
Displays the MAC address of the Access Point on which the handset is
connected.
IP Address
Displays the IP address of the handset.
Signal strength
Displays the -Fi signal strength.Wi
Connection Speed
Displays the connection speed value.
Page | 52
WP820 User Guide
Version 1.0.7.30
Channel
Displays the channel on which handset is placed.
Frequency
Displays the channel frequency.
TX Packets
Displays the total packets volume sent by handset.
TX error packets
Displays the number of packets that failed to be transmitted.
TX error rate
Displays the global percentage of packets that failed to be transmitted.
TX drop packets
Displays the amount of TX packets that were dropped by router.
TX drop rate
Displays the global percentage of TX packets that were dropped by router.
RX Packets
Displays the total packets volume received by handset.
RX error packets
Displays the number of packets that failed to be received.
WP820 Battery
To check the Battery information, follow these steps:
1. Press key to bring up operation menu.Menu
2. Use arrow keys to Reach menu and navigate to .Status Battery
Figure : WP820 Battery25
The following information will be displayed:
Table : WP820 Battery Description11
Item
Description
Current Battery
Displays the current Battery percentage.
Used Time
Displays the handset used time on Battery since the last full charge.
Remaining time
Displays the remaining battery time.
Battery Temperature
Displays the current Battery temperature.
Battery usage
Displays the percentage of battery consumption of each app.
Page | 53
WP820 User Guide
Version 1.0.7.30
Screen Lock
Setting the Key Lock from Handset
To configure Key lock from the handset, follow below steps:
1. Access WP820’s menu Settings Basic Settings Display Lock Screen. → →
2. Set “Lock screen” to “On”.
3. (Optional). Configure “Set Password’ to define a PIN code (6-digit numerical password) to unlock
the keypad and press “Save”.
Figure : Keypad lock from handset26
Lock Screen Settings from Web GUI
User can configure lock screen functions on the web UI. The screen lock password was also added to
provide additional security. Default Disabled.
1. Proceed from System Settings Security Settings Lock Screen Settings.→ →
2. Enable option “Screen Lock Function”.
3. On Screen Lock Password, click on Add Password then once done, click OK then Save then Apply.
Page | 54
WP820 User Guide
Version 1.0.7.30
Figure : Lock Screen Settings27
Locking/Unlocking the Screen
To lock the Screen
Press the and hold for approximately 2 seconds, orPound key “#”
Press while the LCD is idle. On-hook / power key
To unlock the Screen
Press button (Left softkey) and to unlock the keys.Unlock Pound key “#”
Figure : Unlock Keypad28
Note: When the phone is locked, it is still possible to pick up incoming calls.
Page | 55
WP820 User Guide
Version 1.0.7.30
Configuring the LCD Brightness and Screen Timeout
1. Press to bring up operation menu. Menu
2. Use arrow keys to reach .Settings
3. Navigate to , and then select . Basic Settings Display
4. Configures the LCD brightness, key backlight, lock screen, screen time out and the font size.
5. Press “ ” (right softkey) to save and apply the new settings.Back
Figure : LCD Display Configuration29
Return to Idle Screen
Press the to quickly exit the menu and return back to the main idle screen. Power Key
When you are navigating on the handset’s menu, and you receive an incoming call, the LCD screen will
automatically exit the menu and you can either accept or reject the call, when the call is terminated, the
LCD screen will return back to the idle screen.
Register a SIP Account
The WP820 supports up to 2 SIP accounts and they can be configured either using the web GUI or via the
keypad menu as described on the following section.
Register Account via Web User Interface
1. Access your WP820 base station web UI by entering its IP address in your favorite browser.
2. Enter your admin’s username and password (default username and password: admin/admin).
3. Press to access your settings.Login
4. Go to tab and select the account configure.Account to
Page | 56
WP820 User Guide
Version 1.0.7.30
5. In General Settings, set the following:
a. Account Active Yes.to
b. Account Name: Any name to identify this specific user.
c. SIP Server field with your SIP server IP address or FQDN.
d. Secondary SIP Server with your secondary SIP server IP address or FQDN. Leave empty
if not available.
e. SIP User ID: User account information, provided by VoIP service provider (ITSP). Usually
in the form of digit similar to phone number or actually a phone number.
f. SIP Authenticate ID: SIP service subscriber authenticate ID used for authentication. Can
be identical to or different from SIP User ID.
g. SIP Authenticati Password on : SIP service subscriber’s account password to register to
SIP server of ITSP. For security reasons, the password field will be shown as empty.
h. Outbound Proxy : configure this field with your outbound proxy IP address or FQDN.
Leave empty if not available.
6. Press to save your configuration.Save and Apply
After applying your configuration, your phone will register to your SIP Server. You can verify if your WP820
has registered with your SIP server from its web interface under Status Account Status (Registered
with green color when the account is correctly registered, or “ with grey when the account is Unregistered
not properly registered)
Figure : Account Status30
Register Account via LCD Menu
To register your SIP account via the LCD menu, please refer to following steps:
1. Unlock your WP820 and press to bring up operation menu. Menu
2. Use arrow keys to reach and then select .Settings Account tab
3. Select which account you want to configure and then set the following:
a. Account Activation to “On”.
Page | 57
WP820 User Guide
Version 1.0.7.30
b. Account Name: Any name to identify this specific user.
c. SIP Server field with your SIP server IP address or FQDN.
d. SIP User ID: User account information, provided by VoIP service provider (ITSP).
Usually in the form of digit similar to phone number or actually a phone number.
e. SIP Authenticate ID: SIP service subscriber authenticate ID used for authentication.
Can be identical to or different from SIP User ID.
f. SIP Authentication Password: SIP service subscriber’s account password to register
to SIP server of ITSP. For security reasons, the password field will be shown as empty.
g. Outbound Proxy: configure this with outbound proxy IP address or FQDN. Leave
empty if not available.
h. Voicemail Access Number: The voicemail number of your account.
i. Display Name: The name that will be used for caller ID name in SIP INVITE.
Figure : SIP Accounts Configuration31
Guest Login
The Guest Login feature provides the ability to share the same wireless phone by multiple users at different
periods of time.
Configuration
This feature can be enabled from the WEB GUI under Phone Settings General Settings Guest
Features.
Page | 58
WP820 User Guide
Version 1.0.7.30
Figure : Guest Login settings32
1. Enable the Guest login by checking the Guest Login parameter.
2. Enter the PIN to be used for authentication.
3. Configure the SIP domain to be used as SIP server for registration:
a. Server Alias: The server alias is used to customize the server name.
b. The Server list will contain the IP addresses/Domain names to be used as SIP registration
servers
Note: A reboot is required for these settings to take effect.
User Login
Once the phone boots up with the Guest Login feature enabled users can follow these steps to login:
1. Press the dial button or press any numeric button.
2. The Guest Login page will be opened, and the user is asked to enter the Extension credentials.
3. Enter the Account ID, the SIP password and choose the Alias of the SIP server configured on the
WEB GUI as mentioned on steps above.
Page | 59
WP820 User Guide
Version 1.0.7.30
4. Set the “Expire parameter” to the number of hours this login will stay valid.
Figure : Guest Login Window33
Note: When the “Expire” parameter is set to “Always users are asked to enter the PIN code that was
previously configured on the WEB GUI.
User Logout
To logout from the Guest Login mode users can follow these steps:
1. On idle screen, press the soft-key.Settings
2. Select .Logout
3. Confirm the logout by pressing the soft-key.Logout
Figure : Guest Logout34
Page | 60
WP820 User Guide
Version 1.0.7.30
PHONE SETTINGS
Selecting Phone Language
The WP820 supports different languages. The default language of the handset is English. To change the
language of the handset, please proceed as follows:
1. Press to bring up operation menu. Menu
2. Use arrow keys to reach .Settings
3. Navigate to , and then select .Basic Settings Language
4. Choose the desired language from the available list and press “ and then the phone will Select
apply the selected language.
Figure : Configuring Phone Language35
Activate/Deactivate Hands-Free Mode
Press the while making a call or on the idle screen to activate hands free mode. Hands-free key
Press the again to deactivate the hands-free function. Hands-free key
Muting the Microphone
1. Press the button during an established call and a list of the options will Options (Left softkey)
be displayed.
2. Choose” and press “ button (left softkey / button) to switch on the microphone. Mute” Select” OK
Notes:
While muted, the icon will be displayed on the screen.
To unmute the microphone during an established call, press the button Options (Left softkey),
choose ” and press button (left softkey or OK button) to switch off the microphone.Unmute Select
Page | 61
WP820 User Guide
Version 1.0.7.30
Note: If PTT/Paging button is customized by the administrator to be Mute/Unmute, users can press the
Multi-function button to Mute/Un-mute the MIC during calls.
Adjusting Speaker and Earpiece Volume
Press volume up and down keys on the left side of your phone while you are on an established call to set
the volume of the earphone / speaker. You can choose between 8 different levels. The default level is 4.
Ringtones
Setting the Ringer Volume on the WP820
To configure the desired ringer volume, proceed as follows:
1. Press to bring up operation menu and go to .Menu Settings
2. Navigate to , and then select tab.Basic Settings Sound
3. User can configure the silent and vibrate modes and also the voice ringtones by pressing the left
and right arrow keys to change repeatedly and set the desired volume.
4. Press “ (right softkey) to confirm the new configuration settings.Back
Figure : Muting the Microphone36
Page | 62
WP820 User Guide
Version 1.0.7.30
Notes:
15 levels are supported. Level 15 is the highest level. Level 8 is default.
appears when silent mode is enabled. In this mode no ring will be played for incoming calls.
Figure : Ringer Volume37
Setting the Ringtones on the WP820
You can change the ringer melody for an incoming call. The device has different ringer melodies and in
order to configure the desired melody, proceed as follows:
1. Press to bring up operation menu. Menu
2. Use arrow keys to reach , and then select tab. Settings
Basic Settings Sound
3. Go to Default Ringtone”, and choose the desired ringtones, press “Save” to confirm the ringtones
selected and the new ringtones will be set successfully.
Figure : Calls Default Ringtone38
Date and Time
On the WP820 the Date and time are displayed on the idle screen and it obtains the date and time from the
Simple Network Time Protocol (SNTP) server by default. If your phone cannot obtain the date and time
from the SNTP server, you need to configure the date and time manually. You can configure the time format
and date format, respectively. The handset supports two formats for time (12 Hour or 24 Hour) and three
date formats (DD/MM/YYYY; MM/DD/YYYY; YYYY/MM/DD).
To configure date and time manually
Page | 63
WP820 User Guide
Version 1.0.7.30
1. Press to bring up operation menu. Menu
2. Use arrow keys to reach , and then select tab. Settings
Basic Settings Date and Time
3. Press “ softkey to apply your changes. Back
Figure : Date and Time Settings39
Wallpaper Customization
WP820 wallpaper is customizable through web GUI and the user can upload up to 10 wallpapers.
To upload new wallpaper, User can choose between the below two mentioned methods:
Upload Wallpaper
1. Access WP820 . Web GUI Phone Settings Wallpaper Setting
2. Select Wallpaper Source Uploaded
3. Press Upload button and select the file to use.
Note: WP820 support JPG, PNG, BMP format, size ≤ 2MB (Best Pixel: 240 * 320px)
Page | 64
WP820 User Guide
Version 1.0.7.30
Figure : Wallpaper Settings40
4. Select “Display Mode”: “Default” or “Adaptive” to adjust displayed wallpaper (effective when
uploaded file is not respecting recommended resolution).
Figure : Wallpaper - Display Mode41
Page | 65
WP820 User Guide
Version 1.0.7.30
5. Press “Upload Wallpaper”.
Figure : Wallpaper – Uploaded42
Download Wallpaper
1. Access WP820 . Web GUI Phone Settings Wallpaper Setting
2. Select Wallpaper Source Download
3. Enter the Wallpaper Server Path
4. Press on save.
Figure : Wallpaper – Download43
Page | 66
WP820 User Guide
Version 1.0.7.30
Applying Uploaded Wallpaper
To apply uploaded wallpaper, follow below steps:
From Handset:
1. Access WP820 menu Settings Basic Settings Display Wallpaper.
2. Select uploaded wallpaper and press OK button or “Preview” (left softkey)
3. Press “Set Wallpaper” (left softkey) to apply.
Figure : Switching Wallpaper from Handset44
From Web GUI:
1. Access WP820 Web GUI Phone Settings Wallpaper Setting.
2. Select Wallpaper Source Uploaded.
3. Select uploaded wallpaper and press “Set Wallpaper
Page | 67
WP820 User Guide
Version 1.0.7.30
Figure : Switching Wallpaper from Web GUI45
Note: When using the Download method, the wallpaper will automatically be set as the phone wallpaper
once downloaded.
Deleting Wallpaper
To delete previously uploaded wallpaper, refer to following steps:
1. Access WP820 Web GUI Phone Settings Wallpaper.
2. button to delete specific wallpaper. Press
Figure : Deleting Wallpaper46
Page | 68
WP820 User Guide
Version 1.0.7.30
Notes:
Only uploaded wallpapers can be deleted.
Currently used wallpaper cannot be deleted.
Reboot the WP820
To reboot the WP820, please refer to following steps:
1. Access WP820 menu Settings Advanced Settings Reboot.
2. A confirmation LCD message will be displayed to confirm the reboot, press button to Reboot
reboot the phone or “ ” to cancel the reboot. Cancel
Figure : Reboot the WP82047
Page | 69
WP820 User Guide
Version 1.0.7.30
CALL OPERATIONS
Placing calls
To place calls, you can use the following mode:
Earpiece mode: pressing the off-hook / dial key to dial out.
Speakerphone mode: pressing the speakerphone key to dial out.
Headset mode: pressing the off-hook / dial key to dial out using connected headset.
During the call, you can switch the call mode by pressing the corresponding keys or connecting a headset.
Make a Call using a Line
Making calls require the use of SIP lines. So, you should first register the SIP account to the handset
beforehand, after registering the sip lines, you can choose between them while trying to make calls by
pressing the button displayed on the call screen. Please refer to the following methods to make Accounts
calls using a line:
Method 1:
1. Enter the desired number using the keypad.
2. Toggle between the available lines by pressing the button to choose the line for Accounts
making calls. (The account name will change on the screen when press “Accounts” button).
3. Press , left softkey Dial key Call , # (Use # as dial key” must be configured in web
configuration) to initiate the call or wait for 4 seconds and the call will be initiated automatically.
Note Speaker : Users can also initiate calls with handsfree mode using key .
4. To terminate the call, press Hang-Up key .
Method 2:
1. Press or to enter the pre-dialing screen. Dial key Speaker key
2. Toggle between available lines by pressing the button to choose the line for making Accounts
calls. (The account name will change on the screen when press “Accounts” button).
3. Enter the number to dial using the keypad.
Page | 70
WP820 User Guide
Version 1.0.7.30
4. Press left softkey Dial key , Call , # (Use # as dial key” must be configured in web
configuration) to initiate the call or wait for 4 seconds and the call will be initiated automatically.
5. To terminate the call, press Hang-Up key .
During the call, you can switch the call mode by pressing the corresponding keys and cancel the dialing
operation by pressing the on-hook key. During the call conversations, you can press the left and right
navigation keys to adjust the volume. The call duration is displayed on the LCD screen while the call is
in progress and call summary will be displayed once the call is terminated.
Notes:
To dial “+” please keep pressing “0” key for about 2 seconds.
To dial from contacts list, choose a contact using navigation keys and press Dial key .
When having un-read voicemails on the WP820, once accessing the dialing interface a stutter tone
will be heard to notify users about voicemails that need to be read.
The maximum length of dialed digits is limited to 30 characters.
Dialing from Call history
Users may use their call history entries to initiate calls. Please refer to following steps:
1. Press to bring up operation menu. Menu
2. Use arrow keys to reach Call History.
3. Select the desired entry and press key to establish the call.Dial
Figure : Dialing from Call History48
Note: Options Edit before DialingIn step 3, users can press softkey followed by option to edit the
number before initiating the call. The call history list stores the last dialed phone numbers. When the
memory of the redial number list is full, the handset will automatically erase oldest dialed number when a
new number is dialed.
Page | 71
WP820 User Guide
Version 1.0.7.30
Dialing from Phonebook
Users may use their contacts list to initiate calls.
1. Press to bring up operation menu and use arrow keys to reach or press Menu Contacts Contacts
key to access directly the contacts list.
2. Select the contact to call and press to initiate the call.Dial Key
Note: In step 2, users can press “Options” softkey followed by “Edit before Dialing” option to initiate the call.
Figure : Dialing from Contacts List49
Answering Calls
When receiving an incoming call, you can answer the call using following steps:
Earpiece mode:
Press to pick up the call, or “Accept” softkey (left softkey).Dial Key
Speakerphone mode:
Press to pick up the call.Speaker Key
Headset mode:
Press to pick up the call, or “Accept” softkey (left softkey) using a connected headset.Dial Key
Note:
To answer an incoming call during an established call, press Dial Key, or the Speaker Key, or the “Answer
softkey. The incoming call is answered, and the original call is placed on hold.
Auto Answer
Users can enable Auto Answer feature to accept and automatically answer incoming calls.
If enabled, WP820 will automatically answer incoming calls using speaker mode. the
To activate / deactivate the auto answer feature:
Page | 72
WP820 User Guide
Version 1.0.7.30
Using WP820 LCD Menu
1. Press to bring up operation menu. Menu
2. Use arrow keys to reach .Settings
→ Call settings Auto answer
3. Select which account will be enabling the Auto answer feature.
4. Set “ - ” to “ ” and configure the auto-answer mode and press “ ” button.Auto Answer On Save
Figure : Auto-answer on WP82050
Note: The auto-answer icon will be displayed near of the account on the LCD screen when the Auto-answer
feature is enabled on the configured accounts as displayed on the following screenshot.
Figure : Auto-answer Idle Screen51
Using WP820 Web Interface
1. Access WP820 Web GUI Interface.
Page | 73
WP820 User Guide
Version 1.0.7.30
2. Navigate to .Account Call Settings Call features
3. Set “Auto Answer” to “Yes”. (By default, set to “No”).
Ending Calls
To terminate the calls, press key Hang-Up .
Rejecting Calls
To reject an incoming call, press key .Hang-Up
Call Hold/Resume
During active call, press the right softkey “ ” to put the established call on hold. Hold
To resume the call, press the right softkey “ ” while the established call is being on hold. Unhold
Figure : Hold/Unhold Calls52
Notes:
- If you press on” Options during the established call, and then make a new call to another number,
the first call will be on hold automatically and users can put up to 2 calls on hold at the same time.
Call Waiting
This feature will notify you of a new incoming call during an established call and display the incoming call
information visually on the LCD screen and a call waiting tone will be heard. If this feature is disabled, the
new incoming call will be automatically rejected.
This feature is enabled from the WP820 Web GUI:
1. Access WP820 Web Interface.
2. Go to Phone settings Call Settings
.
Page | 74
WP820 User Guide
Version 1.0.7.30
3. Set “ ” and “Disable Call Waiting Disable Call Waiting Tone” to “No”. (Default is No).
4. Press Save and Apply buttons to confirm the new settings.
Users now will be able to hear the call waiting tone and it will be visible as well on the LCD screen as
displayed on the following screenshot.
Figure : Call Waiting53
Do Not Disturb
You can activate or deactivate the DND mode for your accounts registered on the handset from its LCD
menu. If DND mode is activated, all incoming calls will receive busy treatment depending on your
configuration (forward to voice mail, busy tone…).
To enable or disable the DND mode, Access LCD Menu
Settings Call Settings Do not disturb
and set to .Do not disturb On
Figure : DND Enabled54
Call Forward
The call forward feature will allow you to forward all the incoming calls to the desired number. Three possible
call forward types are available on the WP820.
Unconditional: All the incoming calls are immediately forwarded to the desired number.
Page | 75
WP820 User Guide
Version 1.0.7.30
Time Based: Incoming calls are immediately forwarded to the desired number based on the
configured time.
Others: Incoming calls are forwarded to the desired number when Busy, when DND is enabled or
when there is no response.
To enable the call forward, please refer to the following steps:
1. Press to bring up operation menu. Menu
2. Use arrow keys to reach .Settings
→ Call Settings Call forward
3. Select which account will be enabling the call forwarding feature and navigate to Call forwarding”.
4. Set “ ” to “ ” and select the call forwarding mode.Call Forward On
5. Configure the parameters of the call forward mode and press “ ” button.Save
Figure : Call Forwarding55
Unconditional: All the incoming calls will be forwarded to the number set up in "All To" field.
Time Based: All the incoming calls will be forwarded to the number as schedule in the time period.
Page | 76
WP820 User Guide
Version 1.0.7.30
During the setup time, the call will be forwarded to the number in "In Time Forward To:" field. Other
period the call will be forwarded to the number in "Out Time Forward To:" field.
Others: The incoming call will be forwarded when the WP820 is busy or no answer after certain
interval "Delayed Call Forward Wait Time (s)" or if the phone is set to DND mode.
Note WP820 Web GUI Account Call Settings: The call forwarding can be also configured from the
.
Call Transfer
The WP820 supports the call transfer feature, you can transfer a call to another party using one of the
following ways:
Blind transfer: Transfer a call directly to another party without consulting
Attended transfer: Transfer a call with prior consulting.
Note: Users can also perform transfers to LDAP contacts by pressing the phonebook key when in the
transfer call screen.
Blind Transfer
1. Press “Transfer” softkey during a call, and then enter the number you want to transfer the call to.
2. Select Blind transfer by pressing on key.Blind
3. The call is connected to the number you specified, and the LCD screen prompts Call Transferred.
Figure Blind Transfer56:
Attended Transfer
1. Press “Transfer” softkey during a call, and then enter the number you want to transfer the call to.
2. Select Attended transfer by pressing on Attended key.
Page | 77
WP820 User Guide
Version 1.0.7.30
3. After transfer target answers the call, the following screen will be shown up. If the transferor taps
on Confirm, the call will be transferred, and the WP-820will hang up the call.
4. If the user taps on "Split" soft key to separate the calls, the user will talk to the second established
call while the first call is on hold.
Figure : Attended transfer58
Figure : Attended transfer options57
Figure : Split Calls59
Page | 78
WP820 User Guide
Version 1.0.7.30
Speed Dial
Speed dial allows users to perform single-digit dialing to predefined numbers. This feature is particularly
useful to speed up dialing frequently used or hard to remember numbers. A maximum of speed dial 10
numbers is allowed. For example, the digit key 2 is configured as a speed dial key and assigned the number
4000, the phone will dial out the number 4000 directly when you long press digit key 2.
Note: The speed dial number should not be set on chosen representative number, otherwise long press
will initiate a call to configured speed dial number.
To configure the speed dial (create, edit, or delete) numbers, proceed as the following steps:
1. Press to bring up operation menu and use arrow keys to reach Menu Settings Call Settings
Speed dial.
2. Select the speed dial key to be configured and press “ ” softkey.Select
3. Select the associated account and the number to be dialed.
Note: Users can also select the numbers from the contact list by selecting “Choose a contact”.
4. Press “ ” softkey to save the configured speed dial numbers.Save
Figure : Speed Dial Configuration60
Page | 79
WP820 User Guide
Version 1.0.7.30
3-Way Conference
The WP820 supports creating a local conference with other parties (including handset starting the
conference). To start a 3 Way conference, follow below steps:
1. Place a call to the first party ress left softkey then select “ ”.and p “Options”, Conference
2. Enter the number of the second party you want to add to the conference and press .Join Conf
3. The conference will automatically be bridged before the third party answers the call.
Please refer to the following screenshots for more details.
Figure : 3-way Conference Call61
Notes:
Users can start recording the conference by tapping on “Record” under “Options”.
Users can kick one of the parties from the conference by tapping on “Kick [Extension]” under
Options.
UCM Conference
Participate in UCM Conference Room
Users could dial the UCM conference room extension to join the conference. If password is required, enter
the password to join the conference as a normal user, or enter the admin password to join the conference
as administrator.
Note: Number of current participants is shown starting from firmware release 1.0.5.5.
Page | 80
WP820 User Guide
Version 1.0.7.30
Conference Call Operations
View conference participants: Users could press on key in order to view the conference UCM
participants.
Figure : Join UCM Conference Room62
Figure : UCM Conference Participants63
Page | 81
WP820 User Guide
Version 1.0.7.30
Invite members: Administrators could press on softkey during the conference and then press UCM
on Invite in order to send and meeting invitation to the composed number. Press on after Invite
entering the number.
Note: ‘Require confirmation If the parameter is On, invited party will need to confirm before joining the
the meeting conference.
Mute/Unmute a participant: Administrators could select a member and press on Options
Mute/Unmute a participant.
Kick a Participant: Administrators could select a member and press on Options Kick
a
participant from the conference.
Figure : Send meeting invitation64
Figure : Kick a participant65
Page | 82
WP820 User Guide
Version 1.0.7.30
CEI (Conference Event Indicator)
If CEI is enabled, Events like members joining/Leaving the conference, Invitation sent, Mute/Unmute … will
be displayed in the call screen as the examples shown below:
Member has joined notification:
Member Mute notification:
Figure : Member has joined notification66
Figure : Member Mute notification67
Page | 83
WP820 User Guide
Version 1.0.7.30
Member Left Notification:
Voice Mail
The voice mail feature ensures that you will never miss any important messages. It permits either to leave
voice mails to someone else or receive and listen to voice mails via the handset
Set Voice Mail ID
There are 2 ways to set Voice Mail Feature Code, either using WP820 Handset Menu or Web Interface.
Note: The Voice Mail Feature Code depends on the service provider or IP-PBX used. For example, if
UCM6xxx as SIP server, the Voice Mail Feature Code is .*97
Using WP820 LCD Menu
1. Press to bring up operation menu. Menu
2. Use arrow keys to reach VoiceMail tab.
Note: You can access the VoiceMail tab by long pressing on digit “1”.
3. Select the desired account and configure the Voicemail ID number, then press “ ” softkey. Save
Figure : Member left notification68
Page | 84
WP820 User Guide
Version 1.0.7.30
Figure LCD Menu - Voice Mail ID69:
Using WP820 Web Interface
1. Access WP820 Web GUI Interface.
2. Go to Account General Settings Account Registration.
3. Configure Voice Mail Access Number.
Figure Web UI - Voice Mail Access Number70:
Play Voice Mail Messages
1. Press to bring up operation menu. Menu
2. Use arrow keys to reach VoiceMail tab.
Note: You can also access the VoiceMail tab by long pressing on digit “1”.
3. Choose the account, press button and enter Voicemail password then to can select visually Select
and retrieve your voice messages saved on your voice mail and listen to each individual voicemail.
Note: this feature is compatible with UCM6xxx on v.1.0.20.6 or later.
Page | 85
WP820 User Guide
Version 1.0.7.30
Figure : Playing Voicemail Messages71
Notes:
If VM is protected by a password, users can enter the password using WP820 keypad after reaching
Voice Mail system. The password is defined on the service provider or IP-PBX side.
When having un-read voicemails on the WP820, once accessing the dialing interface a stutter tone
will be heard to notify users about voicemails that need to be read.
Page | 86
WP820 User Guide
Version 1.0.7.30
CONTACTS
Users can manage local/LDAP and Broadsoft XSI contacts, groups, and blacklist by adding, deleting, and
modifying every single contact. Users could access WP820 contacts under WP820 Menu. Please, refer to
the following screenshots:
Figure : Accessing Contacts72
Notes:
Users could switch between “Local Contacts”, “LDAP Contacts”, “Local Groups” and “Blacklistby
using the right and left arrow buttons from the handset.
The WP820 supports 1000 contacts as maximum number of local contacts.
Local Contacts
Users can manage local contacts by adding, deleting, and modifying single contacts. The following
operations can be done under local contacts screen:
: UCreate new contact nder “Option”, users can select “New Contact” in order to manually add the
contacts information and details. Please, see the following screenshots and table:
Figure : Create a new contact73
Page | 87
WP820 User Guide
Version 1.0.7.30
Table : New Contact Parameters12
Last Name
Enter the contact’s last name.
First Name
Enter the contact’s first name
Work Phone
Enter the contact’s work phone number.
Home phone
Enter the contact’s home phone number.
Mobile phone
Enter the contact’s mobile phone number.
Group
Choose the group you want to include your contact into.
Ringtone
Choose a specific ringtone for the account’s received calls.
Account
Choose the default account you want to dial with this contact.
Address, company,
Rank, Department
and Title
Additional information.
Search for a contact: in case finding a specific contact among a batch of contacts is difficult, users
can press the middle softkey “Search” and enter the name of the contact to find it easily or use the
quick search feature and press on any keyboard key in order to enter the search mode.
Dial out from Contacts: Select the needed contact and tap on the dial key to call it directly.
The phone will use the configured account on contact’s information to dial out with.
Edit before dialing: Users could copy the contact’s number to the dial screen in order to edit it
before dialing.
Add to blacklist: Users have the ability to block received calls from a specific contact from by
adding it to Blacklist.
Delete contact: Users can delete a specific contact by tapping on “Delete contact”.
Clear all contacts: Users can delete the whole list of local contacts by tapping on “Clear all
contacts”.
LDAP
In addition to local contacts, the WP820 also supports LDAP and LDAPS phonebook if LDAP or LDAPS
server is available within the network. For more information about LDAP configuration on the WP820 Web
GUI, please, refer to WP820 Administration guide.
In order to search for LDAP contacts on the WP820, users need to access “Contacts”, switch to “LDAP”
using the right/left arrow buttons on the handset and show the search field by tapping on “Search”.
Page | 88
WP820 User Guide
Version 1.0.7.30
Groups
Open Contacts and switch to Group using the right/left arrow buttons on the handset. To add a new group, s”
tap on .Options New group
Figure : Create New Group74
Users should enter the following information when creating a new group:
Group Name: Enter the name of the group.
Ringtone: Choose the ringtone that will be assigned to the group.
Members: Choose the members of the group.
Notes:
Ringtone can be assigned in group as well as single contact. If the group’s ringtone is customized,
this ringtone has the highest priority when there is an incoming call to the contact.
Users could select group for contact when adding or editing the contact.
Users could delete a specific group or delete all groups; this options can be found under “Options”.
Blacklist
Blacklist WP820 has blacklist support for users to manage incoming calls. To access “Blacklist”, tap on
“Contacts”, then switch to “Blacklist” using the right/left arrow button on the Handset.
Figure : Blacklist75
Users can tap on “Remove” to remove a contact or on “Clear” to delete all contacts from blacklist.
Page | 89
WP820 User Guide
Version 1.0.7.30
Broadsoft XSI
Users login to their BroadSoft XSI account from the LCD Menu:
Figure : BS XSI Login76
Note:
The BroadSoft Contacts will show up at the Contact APP.
Page | 90
WP820 User Guide
Version 1.0.7.30
CALL HISTORY
The WP820 Call history provides users access to phone’s call logs in different categories and help users
to make some operations directly. Call history can be accessed under menu as shown on the following
figure:
Figure : WP820 Call History77
There are four different categories in the call history. Users could use the phone’s right and left arrows to
view the following categories: All Calls, Missed Calls, Outgoing Calls, Incoming Calls.
Dial Out from Call History
Select one of the call history log and tap on the dial key to call this number directly. The phone will
use the same account as the call log to dial out.
Call History Options
Figure : Call History Options78
Add to contacts: Users can tap on this option to add the number listed on the selected call history
entry to local contacts.
Edit before dialing: Users could copy the number to the dial screen in order to edit it before dialing.
Page | 91
WP820 User Guide
Version 1.0.7.30
Add to blacklist: Users have the ability to block a number’s calls/messages by adding it to Blacklist.
Delete: Users could delete the selected call history log by tapping on “Delete”.
Delete all: This option helps users to clear all the call history.
Call History Details
For each call history entry, users could tap on “OK” button to access the details to view the account on
WP820 that was called and all the calls that have made/received to/from the selected number. Please, refer
to the following screenshot:
Figure : WP8200 Call History Details79
The following operations could be done:
Dial out this number directly.
Bring up dial screen with the call history number. Users could edit the number before dialing out.
Delete the entry.
Add the number to black list by tapping on "Add to Blacklist”.
Page | 92
WP820 User Guide
Version 1.0.7.30
SMS
The WP820 has built-in SMS application to send/receive message if the SIP server supports SMS message.
Users can create, edit draft, and delete one or all the messages. Tap on phone's menu to launch SMS
application.
View SMS
On the SMS list screen, tap on one of the message using the OK button to view the SMS details.
Figure : View SMS Dialog80
Create SMS
Tap on “New” in SMS application to start composing a new message.
Figure : Create a New Message81
1. Select the account to send the message from by tapping on “Account”. ( By tapping on Note:
“Account”, the user will switch from the first account to the second one in case both SIP accounts
are registered. The account sending the message will be shown in the center of the screen to make
sure of it as shown on the figure above).
Page | 93
WP820 User Guide
Version 1.0.7.30
2. Add number to send the message to in Recipient section. ( : Users could click on “Add” to add Note
existing contacts/groups to Recipient list.
3. Input content: Enter the message content on the next field of the screen. Tap on "Send" once
finished, a “Sending” message will prompt and the message is confirmed as sent once the “Sending”
message prompt disappears.
Note:
Creating SMS is doable from Contacts by selecting a contact name, then pressing Options, and then
choosing Send text message.
Figure : send a New Message from Contact82
Delete SMS
1. On the messages list, tap on “Options” to show more options.
2. Tap on “Delete message” to delete the selected message, or on “Clear all messages” to delete all the
messages/drafts.
Notes:
Under “Options”, users can also find Add to contacts” option to directly include the number selected
on the local contacts.
The option Edit before dialing” under options” is used to facilitate dialing numbers directly from
the SMS application.
Page | 94
WP820 User Guide
Version 1.0.7.30
CALL FEATURES
The WP820 supports traditional and advanced telephony features including call forward and etc.
Table : Call Features13
*72
Unconditional Call Forward. To set up unconditional call forward:
Off hook the phone;
Dial *72 and then enter the number to forward the call;
Press Call softkey or Dial key.
*73
Cancel Unconditional Call Forward. To cancel the unconditional call forward:
Off hook the phone;
Dial *73;
Press Call softkey or Dial key.
*74
Paging Call. To establish a paging call:
Off hook the phone;
Dial *74;
Press Call softkey or Dial key.
*90
Busy Call Forward. To set up busy call forward:
Off hook the phone;
Dial *90 and then enter the number to forward the call;
Press Call softkey or Dial key.
*91
Cancel Busy Call Forward. To cancel the busy call forward:
Off hook the phone;
Dial *91;
Press Call softkey or Dial key.
*92
No Answer Call Forward. To set up delayed call forward:
Off hook the phone;
Dial *92 and then enter the number to forward the call;
Press Call softkey or Dial key.
*93
Cancel No Answer Call Forward. To cancel the delayed call forward:
Off hook the phone;
Dial *93;
Press Call softkey or Dial key.
Page | 95
WP820 User Guide
Version 1.0.7.30
MULTI-FUNCTION BUTTON
PTT (Push to talk) button can be configured under WP820 Web GUI System Settings Preferences
Button Customization Multi-Function Button, to perform the following functions:
PTT/Paging
When users select Multi-function button to be a PTT/Paging button, a short press on the button will take
users to PTT/Paging settings. Users can also press and hold the key to initiate PTT/Paging call.
Please, refer to the section PTT (PUSH- -TALK) FUNCTIONALITYTO
SAFE/Panic Call
Users could change the function of Multi-function button to SAFE/Panic Call, a short press on the key will
open status page to make sure that Panic Call is enabled. Users can also press and hold the key to trigger
Panic Call. Please, refer to the section SAFE/PANIC CALL
Mute/Un-mute
If “Mute” is chosen to be the function of Multi-function button, users will be able to mute incoming calls
ringtone by pressing on the key. Also, the key will be performing mute/unmute function during calls.
Speed dial
The multi-function key can be used to speed dial a contact. Note: The speed dial function will need to be
setup before activating the feature.
Disable
This function of Multi-function button allows the user to disable the multi-function button completely.
Figure : DIsable Multi-function button83
Page | 96
WP820 User Guide
Version 1.0.7.30
PTT (PUSH-TO-TALK) FUNCTIONALITY
The WP820 supports the Push to talk (PTT) features which is a technology based on the instantaneous
communication commonly employed in wireless cellular phone services using a button to switch the device
from voice transmission mode to voice reception mode. This feature is similar to "walkie talkie" use and the
PTT mode switches a phone from full duplex mode, where both parties can hear each other simultaneously,
to half duplex mode, where only one party can speak at one time. Multiple parties to the conversation may
also be included.
Enabling PTT mode on the WP820
You can enable and configure the PTT settings using the WP820 LCD menu:
1. Press to bring up operation menu. Menu
2. Use arrow keys to reach .Settings Advanced settings PTT and paging
3. Choose and enable the .PTT settings PTT function
4. Press button to enable PTT mode.Save
Figure : Enabling PTT Feature on WP82084
Page | 97
WP820 User Guide
Version 1.0.7.30
Using the PTT Functionality on the WP820
To send a PTT broadcast from your WP820:
1. Unlock your WP820.
2. Make sure the multi-function button is configured to be a Push- -Talk button.To
3. Press the Push to Talk soft key.
4. Press and hold the Push to Talk key while speaking.
Figure : PPT Channel85
Notes:
Users could press and hold the Push- -talk key from any screen to quickly initiate PTT call using to
default channel.
The channel status will change to Sending PTT to indicate you are transmitting as displayed that
on the following screenshot.
Figure : PTT Call (Caller)86
The devices which are in the same channel will receive the PTT call.
Page | 98
WP820 User Guide
Version 1.0.7.30
Figure : PTT Call (Callee)87
Release the Push to Talk soft key when you have finished speaking. The channel will wait 10
seconds before release.
Figure : PTT Call Release88
You should press the Push to Talk soft key only when the channel status indicates Waiting.
Otherwise, you may interrupt another person’s message.
PTT Configuration Settings
Please refer to the following Settings for more details about the configuration of the PTT functionality:
Settings
Multicast address: The multicast IP address to send page audio to and receive page audio from.
Default value is 224.0.1.116.
Port: The port to send audio to and receive audio from. Default value is 5001
Emergency volume: The Volume of the emergency cannel. Default value is 8
PTT Parameters
PTT function: Enable or disable the PTT function.
Page | 99
WP820 User Guide
Version 1.0.7.30
Default channel: The PTT channel used to transmit an outgoing page if the user does not explicitly
specify a channel.
Priority channel: The channel assigned for priority pages.
Emergency channel: The channel assigned for emergency pages.
Accept while busy: If no, incoming PTT sessions do not produce standard call waiting. If yes,
incoming PTT sessions produce standard call waiting behavior on the active audio channel.
CallerID(*): Caller ID number for identification.
PTime: The audio payload size in milliseconds.
Audio codec: The audio codec to use for outgoing PTT broadcasts. Incoming PTT audio will be
decoded according to the codec specified in the incoming message.
Channel: Set the channel whether to be usable transported acceptable joined and the channel , , ,
display name.
Group Paging
Enabling Group Paging Feature
You can enable and specify settings for the Group Paging feature through the phone’s user interface.
To specify the Group Paging feature settings:
1. Using your phones interface, navigate to the Group Paging Configuration menu by pressing Settings
Advanced setting PTT and paging PTT and group paging
.
2. Choose Group Paging Configuration.
3. Set Group Paging function to Enabled.
Please, refer to the following screenshots:
Page | 100
WP820 User Guide
Version 1.0.7.30
You can also enable and specify settings for the Group Paging feature through the Web GUI by selecting
Phone Settings PTT/Multicast Setting
.
Figure : Enabling Group Paging89
To send a Group Paging broadcast:
1. Unlock your WP820.
2. Press the Talk soft key.
3. Set Default mode to Group paging.
Page | 101
WP820 User Guide
Version 1.0.7.30
4. Scroll to the group you wish to send a broadcast to.
5. Press and hold the Talk soft key before speaking.
The group status will change to Sending group paging to indicate you are transmitting.
The devices which are in the group will receive the paging.
6. Release the Talk soft key, press the on-hook/power key when you have finished speaking.
Group Paging Parameters
Paging function: Enable or disable the Group paging function.
Default group: The group used to transmit an outgoing page if the user does not explicitly specify
a group.
Priority group: The group assigned for priority pages.
Emergency group: The group assigned for emergency pages.
Accept while busy: If no, incoming Group paging sessions do not produce standard call waiting.
If yes, incoming PTT sessions produce standard call waiting behavior on the active audio group.
Page | 102
WP820 User Guide
Version 1.0.7.30
CallerID(*):Caller ID number for identification.
P-Time: The audio payload size in milliseconds.
Audio codec: The audio codec to use for outgoing Group paging broadcasts. Incoming Group
paging audio will be decoded according to the codec specified in the incoming message.
group: Set the group whether to be availabletransmitsubscribejoin group and the group name.
IGMP Settings
Users could specify how often the phone will report IGMP when PTT/ Paging function is turned on. IGMP
reporter help to keep PTT/ Paging receivable in dormant state. The interval may take some effect to standby
time. The default setting is 30 s.
Figure : IGMP setting90
Page | 103
WP820 User Guide
Version 1.0.7.30
SAFE/PANIC CALL
Safe Monitoring Features
SAFE monitoring feature on WP820 will monitor the users safety situation and trigger an alarm once it
detects any unsafe situation. Once the phone detects that the user may be in a dangerous situation such
as unable to move, fall, or being chased using Safe Monitoring Feature”, the WP820 can quickly alert or
initiate an emergency call for timely assistance.
In particular, the phone will automatically prompt a warning alert and message once it detects any unsafe
situation. If the user does not cancel the prompt warning message to confirm its safety within the set time,
an alarm will be triggered and an emergency call will be initialed (if configured) for assistance.
There are three major types of safety detection methods that can be set on SAFE monitoring settings:
No movement detection: It detects when the user may be unable to move because of an injury
or a coma, etc. Users can configure the duration of the no movement. If it stays no movement
longer than the duration, the device will be triggered for detection.
Tilt detection: It detects when the user may be in a state of slipping or falling, etc. Users can
configure the sensitivity and timeout for this detection. With higher sensitivity level on tilt status, a
relative slight falling action will trigger tilt detection and alert.
Running detection: It detects when user may be in a status of being chased or escaping from a
dangerous environment. Users can configure the sensitivity and timeout for this detection. With
higher sensitivity level on running status, a slower running speed will trigger the running detection.
Users could configure the following SAFE monitoring options under WP820 LCD Menu Settings
Advanced settings SAFE/Panic Call SAFE Monitoring Settings:
Page | 104
WP820 User Guide
Version 1.0.7.30
Table : SAFE Monitoring Settings14
Option
Description
Monitoring
Turn on/off the SAFE monitoring feature.
No Movement Sensitivity
Set the sensitivity of “No movement” detection. There are 7 levels
available for detection. Choose Disabled to stop No movement detection.
No Movement Timeout
(s)
Set the timeout value for No movement” detection. The phone will start
warning if the phone keeps no movement until timeout.
Tilt Sensitivity
Set the sensitivity of Tilt detection”. There are 7 levels available for
detection. Choose Disabled to stop Tilt detection.
Tilt Timeout (s)
Set the timeout value for Tilt detection”. The phone will start warning if
the phone keeps tilt until timeout.
Running Sensitivity
Set the sensitivity of “Running detection”. There are 7 levels available for
detection. Choose Disabled to stop Running detection.
Running Timeout (s)
Set the timeout value for “Running detection”. The phone will start
warning if the phone keeps waggle until timeout.
Snooze Timeout (s)
Set the timeout value of snooze. You can choose snooze while in
warning/alarm State. After the timeout, the phone will start detecting
again.
Warning Timeout (s)
Set the timeout value of warning. The phone will start alarm if the phone
keeps warning and not be canceled.
Panic Call Feature
Users can configure to have Panic Call feature on WP820 by setting it under WP820 LCD Menu
Settings Advanced settings SAFE/Panic Call
. This feature provides users the ability to
manually/automatically trigger Alarm then initiate an emergency call to call for help in case of a dangerous
situation.
Manual use: Users can press and hold the multiple function key on the side of the phone to initial
an emergency call ( : Users need to configure the multi-function button to have the function of Note
“SAFE/Panic Call” under WP820 Web UI). Please, refer to WP820 Administration Guide.
Automatic use: If SAFE monitoring feature has been enabled, Emergency call can be initiated
automatically once the phone detects the un-safe situation.
Page | 105
WP820 User Guide
Version 1.0.7.30
The following list is the list of options that can be configured for “Panic Call” feature under:
WP820 LCD Menu Settings Advanced settings SAFE/Panic Call→ → :
Table : Panic/Emergency Call Settings15
Option
Description
SAFE Monitoring Settings
Configures “SAFE Monitoring Settings”.
Panic Call Silent Alarm
To trigger alarm in a silent way during urgent or dangerous situation,
configure the Panic Call silent alarm option to be on. The default setting
is off. This setting will enable the phone to initiate an emergency call
silently. It is mainly used when it is not convenient to play an alarm in a
dangerous environment.
Emergency Call
To initiate Emergency Call, users need to set the emergency call
number after turning on this feature. The default setting is off.
Warning Tone
Set the Warning tone.
Alarm Tone
Set the Alarm tone.
Page | 108
WP820 User Guide
Version 1.0.7.30
Ringing Volume Down: When set to this option, picking up the WP820 from its cradle
while charging will result in reducing the ringing volume.
Mute: When set to this option, picking up the WP820 from its cradle while charging will
result in muting the ringing.
Alarm Ringtone:
Off: The feature is disabled even if the phone is picked up when Alarm ringtone is heard.
Ringing Volume Down: When set to this option, picking up the WP820 from its cradle
while charging will result in reducing the ringing volume of Alarm ringtone.
Mute: When set to this option, picking up the WP820 from its cradle while charging will
result in muting the Alarm ringtone.
Figure : Pick up94
Figure : WP820 Gesture Control (Pick up)95
Page | 109
WP820 User Guide
Version 1.0.7.30
CONNECTING WP820 TO GDS3710 DOOR SYSTEM
The WP820 offers a powerful integration with GDS3710 Door System and allows users to open the door,
initiates call to the GDS3710 and gets real time audio/video stream from the door system.
The WP820 can be connected with the GDS3710 in two different ways, either using peering mode (without
a SIP server) or through a SIP server.
Figure : WP820 Connected to GDS371096
For more details, please, refer to:
https://www.grandstream.com/hubfs/Product_Documentation/Connecting_GDS3710_with_WP820.pdf
Page | 110
WP820 User Guide
Version 1.0.7.30
DIAGNOSTICS
The WP820’s LCD, Audio and many other features can be diagnosed from the diagnostics APP. The
sections below describe how the diagnosis is run:
Figure : Diagnostics APP97
LCD Diagnostics
Proceed from Diagnostics APP Click on LCD Diagnostics, and you can use the left/right Keys to change
the pictures and OK to exit:
Figure LCD Diagnostics98:
LCD Off
Proceed from Diagnostics APP Click on Select to turn LCD Off, so that you can verify if the backlight does
turn off.
Page | 111
WP820 User Guide
Version 1.0.7.30
Figure : LCD Diagnostics99
LED Diagnostics
Proceed from Diagnostics APP Click on Select to run LED Diagnostics, and you can verify if the LED
color changes upon key press during the test:
Figure : LED Diagnostics100
Keypad Diagnostics
Proceed from Diagnostics APP Click on Select to run Keypad Diagnostics, and you can verify if the
keypad buttons are working fine:
Page | 112
WP820 User Guide
Version 1.0.7.30
Figure : keypad Diagnostics101
Audio Loopback
Proceed from Diagnostics APP Click on Select to run Audio Loopback, so that you can verify if the
microphone, earphone, and back speaker are working fine.
Figure 102: Audio Loopback
Page | 113
WP820 User Guide
Version 1.0.7.30
Acceleration Sensor
Proceed from Diagnostics APP Click on Select to run Acceleration sensor, so that you can verify if the
acceleration sensor is operating fine by tilting the handset.
Figure : Acceleration sensor103
Sensor Calibration
Proceed from Diagnostics APP Click on Select to run Sensor calibration and then click on Start.
Figure : Sensor calibration104
Proximity Sensor
Proceed from Diagnostics APP Click on Select to run Proximity sensor, run the test by covering the sensor
with a finger and wait for LED to go green.
Page | 114
WP820 User Guide
Version 1.0.7.30
Figure : Proximity sensor105
Vibration Diagnostics
Proceed from Diagnostics APP Click on Select to run Vibration diagnostics, run the test by selecting
Vibrate.
Figure : Vibration diagnostics106
Certificate Verification
Proceed from Diagnostics APP Click on Select to run Certificate Verification to verify the device’s
certificate.
Figure Certificate Verification107:
Page | 115
WP820 User Guide
Version 1.0.7.30
Traceroute
Proceed from Diagnostics APP Click on Select to run Traceroute to a FQDN.
Figure : Traceroute108
Ping
Proceed from Diagnostics APP Click on Select to run ping to FQDN.
Figure : Ping109
NsLookup
Proceed from Diagnostics APP Click on Select to run NSLookup on to a domain name.
Page | 116
WP820 User Guide
Version 1.0.7.30
Figure 110 NsLookup:
One-click Debugging
This feature allows user to launch the debug process from the LCD itself and to export the debug file via
USB rather instead of accessing the web GUI to do so. Proceed from Diagnostics APP Click on Select to
run one-click debugging from the LCD.
1. Select the option One-click Debugging.
Figure 111: one-click debugging
2. Select the debug file menu options to be included in the debug Info file then click start
Figure 112: select debug mode and start capture
Page | 117
WP820 User Guide
Version 1.0.7.30
3. Click on stop then Back and select View debug file:
Figure 113: select debug mode and start capture
4. Export to USB drive or delete logs.
Figure 114 export or delete debug file:
Page | 118
WP820 User Guide
Version 1.0.7.30
UPGRADING AND PROVISIONING
The WP820 can be upgraded via TFTP/HTTP/HTTPS by configuring the URL/IP Address for the
TFTP/HTTP/HTTPS server and selecting a download method. Configure a valid URL for TFTP, HTTP or
HTTPS; the server name can be FQDN or IP address.
Examples of valid URLs:
firmware.grandstream.com/BETA
fw.mycompany.com
Upgrade and Provisioning Configuration
There are two ways to setup upgrade and provisioning on WP820. They are Keypad Menu and Web GUI.
Configure via keypad Menu
1. In . WP820 Settings, select Advanced Settings System Upgrade
2. Navigate to and configure the firmware upgrade and config settings. Firmware/Config
Figure 115 WP820 Upgrade Configuration via Keypad Menu:
Page | 119
WP820 User Guide
Version 1.0.7.30
Configure via Web GUI
Open a web browser on PC and enter the IP address for the WP820. Then login with the administrator
username and password. Go to . In the Upgrade web page, enter Maintenance Upgrade Firmware
the IP address or the FQDN for the upgrade server and choose to upgrade via TFTP, HTTP or HTTPS (The
default setting is HTTPS). Save and apply the changes, press button, or reboot the phone to Upgrade
initiate firmware upgrade process.
Figure 116 WP820 Upgrade Configuration via Web GUI:
Please do not power off or unplug the WP820 when the upgrading process is on.Note:
Upload Firmware Locally
If there is no HTTP/TFTP server, users could also upload the firmware to the WP820 directly via Web GUI.
Please follow the steps below to upload firmware to WP820 locally.
1. Download the latest WP820 firmware file from the following link and save it in your PC.
https://www.grandstream.com/support/firmware
2. Log in the Web GUI as administrator in the PC.
3. Go to Web GUI . → →Maintenance Upgrade Firmware
Page | 120
WP820 User Guide
Version 1.0.7.30
4. Click the "Upload" button, a window will be prompted to select firmware file to upload.
5. Select the firmware file from your PC. Then uploading progress will show at the button where it was
"Upload" in the above step.
6. When uploading is done, users can see the upgrading process starts on the WP820 LCD.
7. The phone will reboot again with the new firmware version upgraded.
Figure 117: Upload Firmware File to Update
No Local Firmware Servers
Service providers should maintain their own firmware upgrade servers. For users who do not have a
TFTP/HTTP/HTTPS server, some free Windows version TFTP servers are available for download from:
http://www.solarwinds.com/free-tools/free-tftp-server http://www.tftpd64.com/ and .
Please check our web site at https://www.grandstream.com/support/firmware for latest firmware.
Instructions for local firmware upgrade via TFTP:
1. Unzip the firmware files and put all of them in the root directory of the TFTP server;
2. Connect the PC running the TFTP server and the WP820 device to the same LAN segment;
3. Launch the TFTP server and go to the File menu Configure Security to change the TFTP server's → →
default setting from "Receive Only" to "Transmit Only" for the firmware upgrade;
4. Start the TFTP server and configure the TFTP server in the phone’s web configuration interface;
5. Configure the Firmware Server Path on your WP820 to the IP address of the PC;
6. Update the changes and reboot the WP820.
End users can also choose to download a free HTTP server from or use Microsoft http://httpd.apache.org/
IIS web server.
Firmware Upgrade via USB
For users that could not use remote upgrade or could not access the phone's Web GUI to upload firmware,
upgrading via external USB flash drive is an alternative. Follow the steps below to upgrade the WP820 via
USB:
1. Download the firmware file to PC and save it in the USB flash drive
2. Insert the USB flash drive to the WP820.
Page | 121
WP820 User Guide
Version 1.0.7.30
3. The following message will appear indicating that the USB drive is connected and the icon will
appear in the status bar.
Figure 118: USB disk connected
4. Power cycle the WP820 and wait for the device to detect the firmware.
Figure 119: New Firmware Detected
5. Press OK to start the upgrade.
Note FAT32: The USB flash drive should be on format and the firmware file should be necessarily
named wp820fw.bin
Config Provision via USB
This feature allows the user to place XML configuration file on a USB drive and upload to WP820. an
Page | 122
WP820 User Guide
Version 1.0.7.30
Note: WP820 will automatically scan the USB drive for cfg{mac}.xml files after the connection is
established. Please ensure only one instance of the file type is contained in the root directory of the
USB drive.
1. Download the Config file to PC and save it in the USB flash drive
2. Insert the USB flash drive to the WP820.
3. Power cycle the WP820 and wait for the device to detect the Config file.
Wi-Fi Provision via USB
This feature allows the user to place a Wi-Fi configuration package on USB and upload to WP820.
Note: Please see the Wi-Fi configuration upload guide on the Grandstream product page for additional
details by using the following URL:
https://www.grandstream.com/hubfs/Product_Documentation/WiFi_provision_guide.pdf
Provisioning and Configuration File Download
Grandstream SIP Devices can be congured via the Web Interface as well as via a Conguration File
(binary or XML) through TFTP or HTTP/HTTPS. The "Config Server Path" is the TFTP, HTTP or HTTPS
server path for the conguration le. It needs to be set to a valid URL, either in FQDN or IP address format.
The "Cong Server Path" can be the same or dierent from the "Firmware Server Path".
A conguration parameter is associated with each particular eld in the web conguration page. A
parameter consists of a Capital letter P and 1 to 5 (could be extended to more in the future) digit numeric
numbers. i.e., P2 is associated with the “Admin Password” in the Web GUI→ →System Settings Security
Settings User Info Management
page. For a detailed parameter list, please refer to the corresponding
rmware release conguration template in the following link:
https://www.grandstream.com/support/tools
When the WP820 boots up, it will issue TFTP or HTTP(S) request to download a conguration XML le
named "cfgxxxxxxxxxxxx" followed by "cfgxxxxxxxxxxxx.xml", where "xxxxxxxxxxxx" is the MAC address of
the phone, i.e., "cfg000b820102ab" and "cfg000b820102ab.xml". If downloading "cfgxxxxxxxxxxxx.xml" le
is not successful, the provision program will download a generic cfg.xml le. The conguration le name
should be in lower case letters.
For more details on XML provisioning, please refer to the following document:
https://www.grandstream.com/hubfs/Product_Documentation/gs_provisioning_guide.pdf
Page | 123
WP820 User Guide
Version 1.0.7.30
FACTORY RESET
Restore to Factory Default via LCD Menu
Warning:
Restoring the Factory Default Settings will delete all configuration information on the phone. Please backup
or print all the settings before you restore to the factory default settings. Grandstream is not responsible for
restoring lost parameters and cannot connect your device to your VoIP service provider.
There are two methods to restore the WP820 to the factory default settings.
1. On WP820 idle screen, go to Settings Advanced Settings Factory reset
.
2. In the new window, confirm the reset using the left softkey.
Figure WP820 LCD - Confirm Factory Reset120:
3. Once confirming the factory reset, WP820 will reboot with the default factory settings.
Restore to Factory Default via the Web GUI
1. Login WP820 Web GUI and go to ;Maintenance Upgrade
Advanced Settings
2. At the bottom of the page, click on the button for Factory reset. Reset
Figure WP820 Web GUI - Factory Reset121:
3. A dialog box will pop up to confirm factory reset.
Page | 124
WP820 User Guide
Version 1.0.7.30
4. Click OK to restore the phone to factory settings.
Figure WP820 Web GUI - Confirm Factory Reset122:
Restore to Factory Default using Hard Keys
In order to perform hard reset of the phone using keypad buttons please follow below steps:
1. Power cycle the WP820.
2. Press key key immediately and hold it until the LCD shows the factory reset message1+ 9 .
3. Release the buttons and the phone will boot up with the default settings.
Note: When constraint mode or lock screen is enabled, the user will need to enter the admin password
before the device can initiate the factory reset process
Page | 125
WP820 User Guide
Version 1.0.7.30
EXPERIENCING WP820 ENTERPRISE PORTABLE WI-FI PHONE
Please visit our website: https://www.grandstream.com/ to receive the most up- -date updates on to
firmware releases, additional features, FAQs, documentation, and news on new products.
We encourage you to browse our and product related documentation, FAQs User and Developer Forum
for answers to your general questions. If you have purchased our products through a Grandstream Certied
Partner or Reseller, please contact them directly for immediate support.
Our technical support sta is trained and ready to answer all of your questions. Contact a technical support
member or to receive in-depth support. submit a trouble ticket online
Thank you again for purchasing Grandstream , it will be sure to bring Enterprise Portable Wi-Fi Phone
convenience and color to both your business and personal life.

Termékspecifikációk

Márka: Grandstream
Kategória: nincs kategorizálva
Modell: WP820

Szüksége van segítségre?

Ha segítségre van szüksége Grandstream WP820, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók nincs kategorizálva Grandstream

Útmutatók nincs kategorizálva

Legújabb útmutatók nincs kategorizálva