Használati útmutató Gigabyte R272-Z32

Gigabyte szerver R272-Z32

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Gigabyte R272-Z32 (144 oldal) a szerver kategóriában. Ezt az útmutatót 2 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF

Oldal 1/144

Gigabyte Management Console

User's Guide

Rev. 1.0

The trademarks mentioned in this manual are legally registered to their respective owners.

Disclaimer

Information in this manual is protected by copyright laws and is the property of GIGABYTE.

Changes to the specifications and features in this manual may be made by GIGABYTE

without prior notice. No part of this manual may be reproduced, copied, translated, transmitted, or

published in any form or by any means without GIGABYTE's prior written permission.

Documentation Classications

In order to assist in the use of this product, GIGABYTE provides the following types of documentation:

 UserManual:detailedinformation&stepsabouttheinstallation,congurationandusethis

  product(motherboard),coveringhardware,BIOSandBMCrmware.

  ServiceGuide:detailedinformation&stepsabouttheinstallation,congurationanduseof

this product (server barebones), covering hardware & BIOS

 Quick Installation Guide: a short guide with visual diagrams that you can reference easily for

installation purposes

Please see the support section of the online product page to check the current availability of these

documents

For More Information

Forrelatedproductspecications,thelatestrmwareandsoftware,andrelatedinformation,pleasevisit

our website at:

http://www.gigabyte.com

For GIGABYTE distributors and resellers, additional sales & marketing materials are available from our

reseller portal:

http://reseller.b2b.gigabyte.com

For further information & technical assistance, please contact your GIGABYTE sales representative.

You may also message GIGABYTE server directly by email, Facebook or twitter

Email: server.grp@gigabyte.com

Facebook: https://www.facebook.com/gigabyteserver

Twitter: https://twitter.com/GIGABYTEServer

- 3 -

Table of Contents

Chapter 1 Getting Started 5 ...............................................................................................

1-1 Software Requirement 5 .....................................................................................

1-2 GigabyteManagementConsoleNetworkConguration .................................. 6

1-3 Log In Gigabyte Management Console 7 ............................................................

1-3-1 Required Browser Settings: 9 ......................................................................................

1-4 Quick Button and Logged-in User 10 ..................................................................

1-5 Help ................................................................................................................ 11

1-6 Menu Bar ........................................................................................................ 11

Chapter 2 Enter Gigabyte Management Console 13 .........................................................

2-1 Dashboard ...................................................................................................... 13

2-2 Sensor ............................................................................................................ 14

2-2-1 Sensor Detail 15 ..........................................................................................................

2-3 System Inventory 17 ...........................................................................................

2-3-1 CPU Inventory 17 ........................................................................................................

2-3-2 DIMM Inventory 18 ......................................................................................................

2-3-3 PCI Inventory 18 ..........................................................................................................

2-3-4 HDD Inventory 19 ........................................................................................................

2-3-5 NIC Inventory 19 ..........................................................................................................

2-3-6 GPU Inventory 20 ........................................................................................................

2-4 FRU Information 22 .............................................................................................

2-5 Logs & Reports 24 ..............................................................................................

2-5-1 IPMI Event Log 24 .......................................................................................................

2-5-2 System Log 26 .............................................................................................................

2-5-3 Audit Log 27 ................................................................................................................

2-5-4 Video Log 28 ...............................................................................................................

2-6 Settings .......................................................................................................... 29

2-6-1 Captured BSOD 29 .....................................................................................................

2-6-2 Date & Time ............................................................................................................30

2-6-3 External User Services 31 ...........................................................................................

2-6-4 KVM Mouse Settings 42 ..............................................................................................

2-6-5 Log Settings 44 ............................................................................................................

2-6-6 Media Redirection Settings 47 .....................................................................................

2-6-7 Network Settings 54 ....................................................................................................

2-6-8 NVMe MI Management 61 ...........................................................................................

2-6-9 PAM Order Settings 63 ................................................................................................

2-6-10 Platform Event Filter 64 ...............................................................................................

2-6-11 Services ..................................................................................................................73

- 4 -

2-6-12 SMTP Settings 77 ........................................................................................................

2-6-13 SSL Settings 80 ...........................................................................................................

2-6-14 System Firewall 85 ......................................................................................................

2-6-15 User Management 95 ..................................................................................................

2-6-16 Video Recording 100 ...................................................................................................

2-6-17 Fan Policy 109 .............................................................................................................

2-6-18 Power Consumption ............................................................................................. 111

2-7 Remote Control 103 ............................................................................................

2-8 Images Redirection 109 ......................................................................................

2-8-1 Remote Media ......................................................................................................110

2-9 Power Control ...............................................................................................111

2-10 Maintenance Group ...................................................................................... 112

2-10-1 BackupConguration ...........................................................................................113

2-10-2 Firmware Image Location .....................................................................................115

2-10-3 Firmware Update ..................................................................................................116

2-10-4 HPM Firmware Update 122 .........................................................................................

2-10-5 Firmware Information 125 ............................................................................................

2-10-6 PreserveConguration .........................................................................................126

2-10-7 RestoreConguration ...........................................................................................131

2-10-8 Restore Factory Defaults 132 ......................................................................................

2-10-9 System Administrator ............................................................................................133

2-10-10 Sign Out 134 ................................................................................................................

- 5 - Getting Started

1-1 Software Requirement

• Client machine with 8GB RAM.

• If the client machine has 4GB RAM, there will be lag in Video/keyboard/mouse

functionality.

•

Supported Browsers

• Chrome latest version.

• IE 11 and above.

• Firefox (with limited support).

It is advisable to use Chrome or IE for H5Viewer, since Firefox has its own Note:

memory limitations

Chapter 1 Getting Started

Getting Started - 6 -

1-2 Gigabyte Management Console Network Conguration

Follow the instruction to enable the console redirection function.

1. You can gather the IP address on the POST screen.

2. Or, Go to BIOS setup menu.

3. Select .Server Management

4. Select . BMC network Conguration

5. DeneCongurationAddresssourcetoDynamicBmcDhcporStatic.

6. Save and Exit.

7. The BMC IP Address will appear on the IPv4 Address parameter.

8. SavethecongurationandexitBIOSsetupmenu.

- 7 - Getting Started

1-3 Log In Gigabyte Management Console

To access the Gigabyte Management Console, the BMC Web utility will prompt you to enter the

User Name and Password.

Theeldsareexplainedasfollows:

For basic login to the BMC Web UI, use the following login:

• Username: admin

• Password: Refer to unique MB serial number.

NOTE!

If your motherboard / server version is older than G9 (upgrade version), then use the

following login:

Username:admin

Password: password

This serial number can be found on the serial number sticker located on the motherboard of

every GIGABYTE server motherboard and system. The unique pre-programmed password will

be the last 11 characters of the serial number. For example, for the below serial number, the

password will be “JG4P6400027

Getting Started - 8 -

GIGABYTEwillalsoafxnewstickersthatdisplaytheuniqueBMCpassword(examplebelow)to

both the product box (packaging) and to the CPU cover (for motherboards sold separately) or the

server chassis.

Please see the reference guide below / attached for where to find locations of this sticker

according to product / model type.

Products that have been implemented with this change will be indicated as version G9 on the

“Upgrade Version” sticker located on the motherboard / motherboard anti-static packaging /

server chassis / server packaging

Remember Username: Check this option to remember your login credentials.

Sign me in: After entering the required credentials, click the to login to GUI.Sign me in

I forgot my password: If you forget your password, you can generate a new one using this link.

Enter the username, click on link. This will send the newly generated Forgot Password

passwordtotheconguredEmail-IDfortheuser.

- 9 - Getting Started

1-3-1 Required Browser Settings:

Allow le download from this site: For Internet Explorer, Choose Tools ->Internet Options

->Security Tab, based on device setup, select among Internet, Local intranet, trusted sites and

restricted sites. Click .... In the Security Settings - Zone dialog opened, under Custom level

settings, find Downloads option, Enable File download option. Click to the entire dialog OK

boxes.

ForallOtherBrowsers,acceptledownloadwhenprompted.

Enable javascript for this site: The icon indicates whether the javascript setting is enabled in

browser.

Enable cookies for this site: The icon indicates whether the cookies setting are enabled in

browser.

Cookies must be enabled in order to access the website.

Getting Started - 12 -

This page intentionally left blank

- 13 - Gigabyte Server Management Console

Chapter 2 Enter Gigabyte Management Console

2-1 Dashboard

The Dashboard page gives the overall information about the status of a device.

To open the Dashboard page, click from the menu bar. It displays the following:Dashboard

Dashboard

A brief description of the Dashboard page is given below.

BMC Up Time

It indicates the Power On time.

Pending Deassertions

It lists the all pending events incurred by various sensors and occupied/available space in logs

can be viewed. To know about the pending events details, click the More info link. This navigates

to the Event Log page.

Access Logs

A graphical representation of all events incurred by various sensors and occupied/available space

in logs can be viewed, if you click on the More info link, you can view the Audit Log page.

Today & 30 Days (Event Logs)

This page displays the list of event logs occurred by the different sensors on this device. Click

Details link on Today and 30 days to view the event logs for Today and 30 days respectively.

Sensor Monitoring

It lists all the critical sensors on the device. If you click on any list sensor, you can view the

Sensor detail page with the Sensor information and Sensor Events details.

Gigabyte Server Management Console - 14 -

2-2 Sensor

The Sensor Readings page displays all the sensor related information.

To open the Sensor Readings page, click Sensor from the menu. Click on any sensor to show

more information about that particular sensor, including thresholds and a graphical representation

of all associated events.

A sample screenshot of Sensor Readings page is shown below.

The Sensor Readings page contains the following information:

In this Sensor Reading page, Live readings for all the available sensors with details like Sensor

Name, Status, Current Reading and Behavior will be appeared, else you can choose the sensor

type that you want to display from the list. Some examples for sensors are Temperature Sensors,

Fan Sensors, Watchdog Sensors and Voltage Sensors etc.

Note: Four DIMM Temp sensors are deployed for monitoring the DIMM temperature on the

system. Users must take notice that the live reading of each DIMM Temp sensor indicates the

temperatureofaDIMMgroup,notthetemperatureofaspecicDIMM.

- 15 - Gigabyte Server Management Console

: Four DIMM Temp sensors are deployed for monitoring the DIMM temperature on Note

the system. Users must take notice that the live reading of each DIMM Temp sensor

  indicatesthetemperatureofaDIMMgroup,notthetemperatureofaspecicDIMM.

2-2-1 Sensor Detail

Select a particular Sensor from the Critical Sensor or Normal Sensor lists. The Sensor

Information as Live Widget and Thresholds for the selected sensor will be displayed as shown

below.

:For Illustrative Purpose, a sample screenshot of Sensor detail page with Change Note

Thresholds option is shown and explained below.

: Widgets are little gadgets, which provide real time information about a particular Note

  sensor.Usercantrackasensor'sbehavioroveraspecicamountoftimeatspecic

intervals.The result will be displayed as a line graph in the widget. The session will not

expire, until the widgets gets a live data of the last widget that is kept opened.

For the selected sensor, this widget gives a dynamic representation of the readings for

Gigabyte Server Management Console - 16 -

the sensor.

There are six types of thresholds:

• Lower Non-Recoverable (LNR)

• Lower Critical (LC)

• Lower Non-Critical (LNC)

• Upper Non-Recoverable (UNR)

• Upper Critical (UC)

• Upper Non-Critical (UNC)

The threshold states could be Lower Non-critical - going low, Lower Non-critical - going high,

Lower Critical - going low, Lower Critical - going high, Lower Non-recoverable - going low, Low

Non-recoverable - going high, Upper Non-critical - going low, Upper Non-critical - going high

Upper Critical - going low, Upper Critical - going high, Upper Non-recoverable - going low, Uppe

Non-recoverable - going high.

A graphical view of these events (Number of Entries vs. Thresholds) can be viewed as shown in

the Sensor Readings page screenshot.

- 17 - Gigabyte Server Management Console

2-3 System Inventory

The System Inventory page displays the following information:

• CPU Inventory

• DIMM Inventory

• PCI Inventory

• HDD Inventory

• NIC Inventory

• GPU Inventory (Nvidia A100 only)

A screenshot displaying the menu items under System Inventory is shown below.

A detailed description of System Inventory is given below.

2-3-1 CPU Inventory

This page displays all detected CPUs on this device. Select one CPU to see the details of

that entry or click on Expand All to view all entries in details. Click Download SMBIOS le to

downloadtheSMBIOSle.

- 18 - Gigabyte Server Management Console

2-3-2 DIMM Inventory

This page displays all detected DIMMs on this device. It allows you to see memory attributes,

individual memory details or all entries in detail by clicking on . Click Expand All Download

SMBIOS letodownloadtheSMBIOSle.

2-3-3 PCI Inventory

This page displays all detected PCI cards on this device. It allows you to see on-board PCI cards,

add-on PCI cards or all entries in detail by clicking on . Click Expand All Download SMBIOS le

todownloadtheSMBIOSle.

- 19 - Gigabyte Server Management Console

2-3-4 HDD Inventory

This page displays all detected HDDs on this device. It allows you to see on-board HDDs, add-

on HDDs or all entries in detail by clicking on . Click Expand All Download SMBIOS file to

downloadtheSMBIOSle.

2-3-5 NIC Inventory

This page displays all detected NICs on this device. It allows you to on-board NICs, add-on NICs

or all entries in detail by clicking on . Click to download the Expand All Download SMBIOS le

SMBIOSle.

- 20 - Gigabyte Server Management Console

2-3-6 GPU Inventory

This page displays all detected GPU card on this device. It allows you to view GPU card all

entries in detail by clicking on . Expand All

Detail information for GPU

• GPU Information

• Capabilities

• NVLink Information

Temperature Information for GPU

• GPU Temperature

• Extended Precision GPU Temperature

Status Information for GPU

• Accumulated Utilization

• Power Supply

- 21 - Gigabyte Server Management Console

Power Information for GPU

• Power Consumption

Clock Information for GPU

• Graphics Clock Frequency

• -Memory Clock Frequency

Gigabyte Server Management Console - 23 -

Board Information

• Board Information Area Format Version

• Language

• Manufacture Date Time

• Board Manufacturer

• Board Product Name

• Board Serial Number

• Board Part Number

• FRU File ID

• Board Extra

Product Information

• Board Information Area Format Version

• Language

• Manufacture Date Time

• Board Manufacturer

• Board Product Name

• Board Serial Number

• Board Part Number

• FRU File ID

• Board Extra

Gigabyte Server Management Console - 25 -

TheEventLogpageconsistsofthefollowingelds:

Filter By Date Start Date End Date: Filtering can be done by selecting and .

:Date should be in MM/DD/YYYY format. Note

By default, all log time will be displayed in BMC time zone.

Filter By Type: The category could be either All Events, System Event Records, OEM Event

Records, BIOS Generated Events, SMI Handler Events, System Management Software Events,

System Software - OEM Events, Remote Console software Events, Terminal Mode Remote

Console software Events.

:Once the Filter By Date and Filter type are selected, the list of events will Note

be displayed with the Event ID, Time Stamp, Sensor Type, Sensor Name and

Description.

Event Log Statistics: Displays the statistical graph for the selected date.

Clear Event Logs: To delete all the event logs.

Download Event Logs: To download the event logs.

Procedure

1. using FromtheFilterByDateeld,selectthetimeperiodbyStart Date End Date and

Calendar for the event categories.

2. From the Filter By Type eld,selecttheType Sensor of the event and name to view the

events for the date. The events will be displayed based on the selected time period.

3. To clear all events from the list, click .Clear All Event Logs

4. To download the event logs, click .Download Event Logs

- 27 - Gigabyte Server Management Console

2-5-3 Audit Log

Audit Log page will display all the system events occurred in this device that has been already

congured.

> Note Log Settings:LogshavetobeconguredunderSettings-> Advanced Log

Settings in order to display any entries.

To open the Event Log page, click Logs & Reports > Audit Log from the menu bar.

A sample screenshot of Audit Log page is shown below.

To view , click the Audit Log tab to view all audit events for this device. Audit Log

Download Event Logs: To download the event logs.

- 28 - Gigabyte Server Management Console

2-5-4 Video Log

To open the Video Log page, click Logs & Reports > Video Log from the menu bar. A sample

screenshot of Video Log page is shown below.

Note: Video Trigger Settings should be enabled, to display the Video Log page. Video Trigger

Settings can be configured under Settings -> Video Recording ->Auto Video Settings ->

Video Trigger Settings.

A sample screenshot of Video Log page is shown below.

Click on the Video Log entry to view the Video. A sample screenshot of Video Log - Video page is

shown below.

 Videowillbeallowedtoplay/downloadonlyiflesizeislesserthan40MB.Browsers

have various memory restrictions, due to this browser cannot store and process data

  greaterthan40MB(approximately).Iflesizeisgreaterthan40MB,userwillbenotied

with a message to use Java player Application.

- 30 - Gigabyte Server Management Console

2-6-2 Date & Time

ThiseldisusedtosetthedateandtimeontheBMC.ASamplescreenshotofDate&Timeis

shown below.

TheDate&Timesectionconsistsofthefollowingelds:

Configure Date & Time: Displays Time zone list containing the UTC offset along with the

locations and Navigational line to select the location which can be used to display the exact local

time.

Select Time Zone:ThiseldisusedtosetthedateandtimeontheBMC.

Automatic Date & Time: To automatically synchronize Date and Time with the NTP Server.

Primary NTP Server:TocongureaprimaryNTPservertousewhenautomaticallysettingthe

date and time.

Secondary NTP Server:TocongureasecondaryNTPservertousewhenautomaticallysetting

the date and time.

Save:Tosavetheconguredsettings.

:If the timezone is selected as Manual Offset, the map selection will be disabled. Note

  TheTime¬Zonesettingswillbereectedonlyaftersavingthesettings.

Gigabyte Server Management Console - 31 -

Procedure

1. Select the location either using drop down or Map. Timezone

2. Enable Automatic Date & Time option to enable/disable the use of NTP servers to

automatically set the date and time.

• InthePrimaryNTPServerandSecondaryNTPServerelds,specifytheNTPserversof

the device respectively.

: Note SecondaryNTPserverisoptionaleld.IfthePrimaryNTPserverisnotworking

  ne,thentheSecondaryNTPServerwillbeused.

3. Click button to save the settings.Save

2-6-3 External User Services

LDAP/E-Directory Settings

The Lightweight Directory Access Protocol (LDAP)/E-Directory Settings is an application

protocol for querying and modifying data of directory services implemented in Internet Protocol (IP)

networks.

In Web GUI, LDAP is an Internet protocol that BMC can use to authenticate users. If you have

an LDAP server congured on your network, you can use it as an easy way to add, manage

and authenticate BMC users. This is done by passing login requests to your LDAP Server. This

meansthatthereisnoneedtodeneanadditionalauthenticationmechanism,whenusingthe

BMC. Since your existing LDAP Server keeps an authentication centralized, you will always know

whoisaccessingthenetworkresourcesandcaneasilydenetheuserorgroup-basedpolicies

to control access.

To open External User Services page, click from the menu Settings > External User Services

bar. A sample screenshot of External User Services page is shown below.

Gigabyte Server Management Console - 33 -

2. Click , to enable LDAP/E-Directory Settings.Enable LDAP/E-Directory Authentication

: Note Congureproperportnumber,whenSSLisenabled.

3. Select the Common Name Type as IP Address.

4. EntertheIPaddressofLDAPserverintheServerAddresseld.

: IP Address made of 4 numbers separated by dots as in ‘xxx.xxx.xxx.xxx’.Note

Each Number ranges from 0 to 255.

First Number must not be 0.

Supports IPv4 Address format and IPv6 Address format.

  CongureFQDNaddress,whenusingStartTLSwithFQDN.

5. Specify the LDAP Port in the Port eld.

: Default Port is 389. For SSL connections, default port is 636. The Port value Note

ranges from 1 to 65535.

6. Specify the Bind DN that is used during bind operation, which authenticates the client to

the server.

: Bind DN is a string of 4 to 64 alpha-numeric characters.Note

It must start with an alphabetical character.

Special Symbols like dot(.), comma(,), hyphen(-), underscore(_), equal-to(=) are allowed.

Example: cn=manager, ou=login, dc=domain, dc=com

7. Enter the password in the Passwordeld.

: Password must be at least 1 character long.Note

Blank space is not allowed

   Thiseldwillnotallowmorethan48characters.

8. Enter the Search Base.TheSearchbaseallowstheLDAPservertondwhichpartof

the external directory tree to be searched. The search base may be something equivalent

to the organization, group of external directory.

- 34 - Gigabyte Server Management Console

: Search base is a string of 4 to 63 alpha-numeric characters.Note

It must start with an alphabetical character.

Special Symbols like dot(.), comma(,), hyphen(-), underscore(_), equal-to(=) are allowed.

Example: ou-login, dc-domain, dc-com

9. SelectAttributeofUserLogintondtheLDAP/E-Directoryserverwhichattributeshould

be used to identify the user.

:It only supports cn or uid.Note

10. Select CA Certicate FilefromtheBrowseeldtoidentifythecerticateofthetrusted

CA certs.

11. Select the CA Certicate Filetondtheclientcerticatelename.

12. Select Private Keytondtheclientprivatekeylename.

:Note Allthe3lesarerequired,whenStartTLSisenabled.

13. Click Save to the settings.save

To add a new Role Group

1. In the LDAP/E-Directory Settings page, click Role Groups and select a blank row.

2. Click Add Role Group or alternatively double click on the blank row to open the Add

Role group page as shown in the screenshot below.

3. IntheGroupNameeld,enterthenamethatidentiestherolegroup.

Gigabyte Server Management Console - 35 -

: Role Group Name is a string of 255 alpha-numeric characters.Note

Special symbols hyphen and underscore are allowed.

4. IntheGroupDomaineld.EntertheRoleGroupDomainwheretherolegroupislocate

: Domain Name is a string of 4 to 64 alpha-numeric characters.Note

It must start with an alphabetical character.

Special Symbols like dot(.), comma(,), hyphen(-), underscore(_), equal-to(=) are allowed.

Example: cn=manager, ou=login, dc=domain, dc=com

5. Inthe GroupPrivilege eld,enter thelevel of privilege(User,Administrator,Operato

None) to assign to this role group.

6. Select one or both of the required options

• KVM Access

• VMedia Access

7. Click to save the new role group and return to the Role Group List.Save

Active Directory Settings

An active directory is a directory structure used on Microsoft Windows based computers and

servers to store information and data about networks and domains. An active directory (sometimes

referred to as AD) does a variety of functions including the ability to provide information on

objects. It also helps to organize these objects for easy retrieval and access, allows access by

end users and administrators and allows the administrator to set security up for the directory.

ActiveDirectoryallowsyoutoconguretheActiveDirectoryServerSettings.Thedisplayedta

showsany conguredRole Groupsandtheavailableslots.Youcanmodify,addor deletero

groups from here. Group domain can be the AD domain or a trusted domain. Group Name should

correspond to the name of an actual AD group.

Note: To view the page, you must be at least a User and to modify or add a group, you must be

an Administrator.

Gigabyte Server Management Console - 37 -

Procedure

Entering the details in General Active Directory Settings page:

1. Click on to open the General Active Directory Settings page.General Settings

2. In the Active Directory Settings page, check or uncheck the Enable Active directory

Authentication check box to enable or disable Active Directory Authentication

respectively.

:If you have enabled. Active Directory Authentication, enter the required information Note

to access the Active Directory server.

3. Specify the Secret user name and password in the Secret User Name and Secret

Passwordeldsrespectively.

: Secret username/password for AD is not mandatory. When secret username & Note

password is empty, Authentication fails will be always treated as Invalid Password error.

For Invalid Password error PAM will not try other Authentication Methods. So it is

recommended to keep AD in the last location in PAM order.

User Name is a string of 1 to 64 alpha-numeric characters.

It must start with an alphabetical character.

It is case-sensitive.

Special characters like comma, period, colon, semicolon, slash, backslash, square

brackets,

Blank space is not allowed, angle brackets, pipe, equal, plus, asterisk, question mark,

Gigabyte Server Management Console - 39 -

Group Name:ThisnameidentiestherolegroupinActiveDirectory.

Role Group Name is a string of 64 alpha-numeric characters.Note:

Special symbols hyphen and underscore are allowed.

Group Domain: The domain where the role group is located.

Domain Name is a string of 255 alpha-numeric characters.Note:

Special symbols hyphen, underscore and dot are allowed.

Group Privilege: The level of privilege to assign to this role group.

KVM Access: To provide access to KVM for AD authenticated role group user.

VMedia Access: To provide access to VMedia for AD authenticated role group user.

To add a new Role Group

1. In the Active Directory Settings page, select a Role Group and click Add Role Group or

alternatively double click on the blank row to open the Add Role group page as shown in

the screenshot below.

2. In the Group Name field, enter the name that identifies the role group in the Active

Directory.

: Role Group Name is a string of 64 alpha-numeric characters.Note

Special symbols hyphen and underscore are allowed.

3. IntheGroupDomaineld,enterthedomainwheretherolegroupislocated.

: Domain Name is a string of 255 alpha-numeric characters. - Special symbols Note

hyphen, underscore and dot are allowed.

4. In the Group Privilegeeld,enterthelevelofprivilegetoassigntothisrolegroup.

Termékspecifikációk

Márka:	Gigabyte
Kategória:	szerver
Modell:	R272-Z32

Szüksége van segítségre?

Ha segítségre van szüksége Gigabyte R272-Z32, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek

Az Ön neve*

Az Ön e-mail címe*

Írja ide kérdését

Útmutatók szerver Gigabyte

Gigabyte TO24-JD0 Útmutató

16 December 2024

Gigabyte G292-Z43 Útmutató

11 Október 2024

Gigabyte MZ32-AR1 Útmutató

6 Október 2024

Gigabyte MS33-CP0 Útmutató

29 Augusztus 2024

Gigabyte R133-X11 Útmutató

29 Augusztus 2024

Gigabyte R183-S97 Útmutató

29 Augusztus 2024

Gigabyte R113-C10 Útmutató

29 Augusztus 2024

Gigabyte R183-SF0 Útmutató

29 Augusztus 2024

Gigabyte R133-X13 Útmutató

29 Augusztus 2024

Gigabyte R183-S96 Útmutató

29 Augusztus 2024

Útmutatók szerver

Legújabb útmutatók szerver

Seagate DS215+ Útmutató

9 Április 2025

Ibm PureFlex System x240 Útmutató

3 Április 2025

Asus Z11PR-D16 Útmutató

2 Április 2025

Teradek Cube 655 Útmutató

29 Március 2025

Teradek Cube 505 Útmutató

29 Március 2025

Teradek VidiU Pro Útmutató

29 Március 2025

Synology RS2414+ Útmutató

24 Március 2025

Synology DiskStation DS713+ Útmutató

24 Március 2025

MSI D3052 Útmutató

15 Január 2025

MSI G3101 Útmutató

15 Január 2025