Használati útmutató Focal Utopia Be Kit N°6 /Active

Focal hangszóró Utopia Be Kit N°6 /Active

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Focal Utopia Be Kit N°6 /Active (69 oldal) a hangszóró kategóriában. Ezt az útmutatót 3 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/69
Utopia Beryllium
Français page 31
2
Summary
Page
Precautions 4
Utopia Be line: User’s manual 5
Tweeters installation 7
Woofers / midranges mounting 9
N° 5 and N°6 Crossblock wiring 13
N°7 Crossblock wiring 15
Crossblock installation 17
N°5 and N°6 Crossblock settings 19
N°7 Crossblock settings 21
Utopia Be Active Kit 23
Subwoofers installation 25
Box enclosure mounting 27
Kits specifications 28
Subwoofers specifications 29
Conditions of guarantee 30
Dimensions 59
International guarantee 62
Notes 64
Serial numbers 68 3
English
Precautions
Special precautions regarding
the Beryllium dome tweeter
In its solid form, Beryllium is harm-
less. However, due to its nature,
certain special precautions should
be observed to avoid exposure to
unnecessary risk.
• Under no circumstances the
Beryllium dome should be subjected
to any form of abrasive action. To
ensure no accidental damage to the
tweeter dome it is advised to carefully
replace the protection cover.
• In the unlikely case of damage to
the dome, of any form, the supplied
piece of adhesive tape should be
immediately used to seal the whole
front surface of the tweeter. The
protective cover should then be
replaced and also taped securely
in place. You should then inform the
dealer from whom you purchased
the product so that the tweeter can
be removed by a professional and
returned to the product distributor
for replacement.
• If the dome is broken in any way
giving rise to loose particles of
Beryllium, they should be carefully
collected with the use of a supplied
adhesive tape and sealed in a zip-
top bag to be returned with the
tweeter.
For further information, please contact
Focal-JMlab directly:
beryllium@focal-fr.com
Warning
Continued listening at high volume
levels above 110dB, can damage
your hearing durably. Listening
above 130dB can damage your
hearing permently.
Running-in period
The drivers used in the Uopia
Be Line are made up of complex
mechanical elements and requires
an adaptation period before they
deliver their full potential. They must
get adapted to the temperature
and humidity conditions of their
environment. This running-in period
depends on the encountered con-
ditions and can last several weeks.
In order to shorten this period,
we advise you to let your speaker
operate for about twenty hours at
medium level, playing standard
music programs, but with a large
amount of bass. Once the com-
ponents of the speaker are com-
pletely stabilized, it is possible to
enjoy the real performances of your
speakers.
4
English
• Fig. 4 and 5
• Fig. 2 and 3
• Fig. 1
6
English
Tweeters installation
Location
TBe tweeter has been designed for
flush mounting (recommended)
or surface mounting installation,
using the two fixing kits provided.
Installation’s choice position is
extremely important. This is a major
factor for high frequency SPL, stability
of the acoustics, stereophonic
imaging, and overall staging. The
standard recommendation for an
ideal stereo imaging, is to ensure
the “left” and “right” tweeters are
installed in the same positions.
Also they are approximately at
equal distance to the driver (vice-
versa for the passenger). Various
positions advised should be checked
and comparatives made, for an
ideal positioning. Tweeter should
always be positioned ahead of the
normal listening position. The main
preferences are the outer positions
of the dashboard ,(fig. 1, A)
on the windscreeen pillars (fig. 1, B)
(only requires a small amount of
install work). The location close to
the door mirror (fig. 1, C) is also
regarded as a good position. Lastly
a position high in the door (fig. 1, D)
is also acceptable even if it is not
considered as the best to optimize
staging. It is imperative to check
before any installation is attempted,
that enough space is available
(especially for flush-mounting
appli-cations). Crossblock (included
in n°5, 6 and 7 kits) contains all
necessary functionalities to optimize
the tweeter setting, according to its
location and vehicle acoustic.
Surface mounting
Surface mounting fixing kit offers
various possibilities, thanks to its
wave guide which allows different
alignments. Fix the assembly using the
screw provided on vehicle trim. Don’t
forget the washer to avoid rubber
joint’s slide shearing (fig. 2, 3).
Thread the cable from the tweeter,
through the back. Then fix tweeter
using the four stainless steel screws.
Flush mounting (highly recom-
mended)
Best results will be obtained by a
tweeter flush mounting. Cut trim
using tweeter as a mould. Push in the
support and ensure it remains flat on
the surface. Ensure it is locked in
place with the screws supplied. Lock
the screw. Thread the cable from the
tweeter, through the back, then lock
in place the tweeter using the four
screws provided (fig. 4, 5).
7
English
Woofers / midranges mounting
Woofer location
Woofers positioned ideally high
in the doors (fig. 1, A), produce
optimal midrange frequencies.
Woofers positioned mid in the
doors are also a solution to
obtain good linearity (fig. 1, B).
If the woofer-mids are positioned
low in the doors (fig. 1, C),the
loss of midrange will be im-portant.
The woofer-mids from the Utopia
Be range can also be placed low in
the “kick-panels” (fig. 2, D) of the
vehicle. This is to further optimize the
stereophonic imaging and staging.
This mounting only suits to Utopia
Be 5“. Crossblock will allow to
obtain a fine setting according to
the location.
Midranges location
3“ midrange (n°7 Utopia Be kit) is
made to be install near tweeter, on
dashboard , in order to (fig. 2, E)
have the better staging. 0.5l volume
aims at going down to 180Hz.
Mounting advises
Utopia Be woofers and woofer-
midranges have been designed for
a multitude of vehicles installations.
It is worth understanding the basic
requirements for installing such
products. These woofers and woofer-
midranges are abble to deliver
enormous amounts of energy, during
their positive / negative movement.
Therefore it is imperative that they
be fixed rigid to the desired location
(fig. 3, A). Resin might be used
(fig. 3, B). The fixing location should
also be strengthened when necessary.
Panels should be strengthened to
eliminate any unwanted vibrations
and screwed on a metallic part
of the vehicle . Such vi-(fig. 3, C)
brations will drastically reduce the
overall performance. These drive
units should be fixed and sealed
to the baffle or location panel. The
use of the foam gasket is advisable
for correct air sealing. For added
performance, and to better reduce
such unwanted vibrations and other
acoustical losses, we recommend
the use of “plain chant”. Easily
positioned behind the woofer, on
the metal-work of the vehicle, Plain
Chant soaks-up vibrations as well
as acoustic reflections. Always en-
sure before that enough space is
available for the magnet assembly,
that it doesn’t interfere with safety
mechanisms or general working
parts. In the case of not using the
grilles supplied, it is important to
ensure the speakers will fit correctly.
Ensure there is enough depth
behind the speaker has already
been explained,but enough thought
must also be given for the forward
movement of the cone and surround
assembly.
9
English

Termékspecifikációk

Márka: Focal
Kategória: hangszóró
Modell: Utopia Be Kit N°6 /Active

Szüksége van segítségre?

Ha segítségre van szüksége Focal Utopia Be Kit N°6 /Active, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók hangszóró Focal

Focal

Focal K2 Power M FRAK Útmutató

5 Április 2025
Focal

Focal Chora Center Stand Útmutató

29 December 2024
Focal

Focal Littora OD Sat 5 Útmutató

3 Szeptember 2024
Focal

Focal Aria Evo X N°2 Útmutató

3 Szeptember 2024
Focal

Focal IC MBZ 100 Útmutató

1 Szeptember 2024
Focal

Focal 1000 ICW6 Útmutató

1 Szeptember 2024
Focal

Focal 1000 IWSUB Útmutató

1 Szeptember 2024
Focal

Focal 1000 IWLCR6 Útmutató

1 Szeptember 2024
Focal

Focal P 30 FSE Útmutató

1 Szeptember 2024
Focal

Focal On Wall 1000 IWSUB Útmutató

1 Szeptember 2024

Útmutatók hangszóró

Legújabb útmutatók hangszóró

Behringer

Behringer B2520 PRO Útmutató

10 Április 2025
Marshall

Marshall Willen Útmutató

10 Április 2025
JBL

JBL Control 426LP Útmutató

9 Április 2025
Crestron

Crestron SAROS IC8T Útmutató

8 Április 2025
LD Systems

LD Systems STINGER G3 TMB Útmutató

8 Április 2025
JBL

JBL Conceal C83 Útmutató

8 Április 2025
Crestron

Crestron SAROS ICE4T Útmutató

7 Április 2025
Crestron

Crestron SAROS ICI6T Útmutató

7 Április 2025
Match

Match UP C42BMW-FRT.3 Útmutató

3 Április 2025
Turbosound

Turbosound PQ12-SB Útmutató

3 Április 2025