Használati útmutató Fluke i30
Olvassa el alább 📖 a magyar nyelvű használati útmutatót Fluke i30 (10 oldal) a Mérőberendezések kategóriában. Ezt az útmutatót 5 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra
Oldal 1/10
PN 2560394
March 2006
©2006 Fluke Corporation. All rights reserved.
®
i30s/i30
AC/DC Current Clamps
Instruction Sheet
Introduction
The i30s AC/DC Current Clamp has been designed for use with
oscilloscopes and DMMs for accurate, non-intrusive
measurement of both AC, DC, and complex waveform currents.
The i30 AC/DC Current Clamp has been designed for use with
DMMs only. Using advanced Hall Effect technology the i30s can
accurately measure currents with a resolution of 1 mA from 5 mA
to 30 A over the frequency range of DC to 100 kHz. These
features make it a powerful tool for use in inverters, switch mode
power supplies, industrial controllers and other applications
requiring current measurements and/or waveform analysis.
Symbols
The table below lists the symbols used on the product and/or in
this manual.
Symbol Description
~ Do not dispose of this product as unsorted municipal
waste. Contact Fluke or a qualified recycler for
disposal.
W Important Information. See manual.
T Double insulation.
- Do not apply around or remove from the HAZARDOUS
LIVE conductors.
) Conforms to Canadian Standards Association.
P Complies with the relevant European standards.
Safety Instructions
Please read this section carefully. It will make you familiar with
the most important safety instructions for handling your product.
In this instruction sheet, a Warning identifies conditions and
actions that pose hazard(s) to the user. A Caution identifies
conditions and actions that may damage the calibrator or the test
instruments.
W
W
W
WW X
X
X
XX Warning
The i30s and i30 may only be used and handled by
qualified personnel. To avoid personal injury, follow
these precautions:
• To avoid electric shock, use caution during
installation and use of this product; high
voltages and currents may be present in circuit
under test.
• Do not use the product if damaged. Always
connect probe to display device before it is
installed around the conductor.
• Always ensure the probe is removed from any
live electric circuit, and leads are disconnected
before removing the battery cover.
• Use the Current Probe only as specified in the
operating instructions; otherwise the current
probe’s safety features may not protect you.
• Adhere to local and national safety codes.
Individual protective equipment must be used
to prevent the shock and arc blast injury where
hazardous live conductors are exposed.
• Do not hold the Current Probe anywhere
beyond the tactile indicator.
• Before each use, inspect the Current Probe.
Look for cracks or missing portions of the
Current Probe housing or output cable
insulation. Also look for loose or weakened
components. Pay particular attention to the
insulation surrounding the jaws.
• Use caution when working with voltages above
60 V dc, 30 V ac rms or 42 V ac peak. Such
voltages pose a shock hazard.
• Use of this equipment is designed to protect
against transients in equipment in fixed
equipment installations, such as distribution
panels., feeders and short branch circuits, and
lighting systems in large buildings.
• Use of this equipment in a manner not specified
herein may impair the protection provided by
the equipment.
• CAT III equipment is designed to protect against
the transients in the equipment in fixed
equipment installations, such as distribution
panels, feeders and short branch circuits, and
the lighting systems in large buildings.
Specifications
Electrical Characteristics
All accuracies stated at 23°C ± 1°C
Current range 20 A ACRMS or DC
Measuring range ± 30 A
Overload capacity 500 A
Output sensitivity 100 mV/A
Accuracy (at 25 °C) ± 1 % of reading ± 2 mA
Resolution ± 1 mA
Typical output noise
level
200 µVRMS
Load impedance > 100 k Ohms ≤ 100 pF
Conductor position
sensitivity
± 1 % relative to center reading
Frequency range
i30s DC to 100 kHz (0.5 dB)
i30 DC to 20 kHz (0.5 dB)
di / dt following 20 A / µs
Response time Better than 1 µs
Temperature
coefficient
± 0.01 % of reading / °C
Operating humidity: 15 to 85 % (non
condensing)C
Altitude: 2000 m
Power supply 9 V Alkaline, NEDA 1604/PP3
IEC 6LR61
Working voltage
(see Safety
Standards)
300 V ACRMS or DC
Battery life 30 hours, low battery indicator
Termékspecifikációk
Márka: | Fluke |
Kategória: | Mérőberendezések |
Modell: | i30 |
Szüksége van segítségre?
Ha segítségre van szüksége Fluke i30, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók Mérőberendezések Fluke
14 Szeptember 2024
1 Szeptember 2024
19 Augusztus 2024
4 Augusztus 2024
1 Augusztus 2024
22 Július 2024
22 Július 2024
21 Július 2024
19 Július 2024
17 Július 2024
Útmutatók Mérőberendezések
- Mérőberendezések PeakTech
- Mérőberendezések Milwaukee
- Mérőberendezések Pioneer
- Mérőberendezések Bosch
- Mérőberendezések Panasonic
- Mérőberendezések Einhell
- Mérőberendezések Voltcraft
- Mérőberendezések Vimar
- Mérőberendezések Flex
- Mérőberendezések Clean Air Optima
- Mérőberendezések ORNO
- Mérőberendezések Be Cool
- Mérőberendezések SHX
- Mérőberendezések Reely
- Mérőberendezések GW Instek
- Mérőberendezések Owon
- Mérőberendezések Mitsubishi
- Mérőberendezések Gossen Metrawatt
- Mérőberendezések Güde
- Mérőberendezések Eastron
- Mérőberendezések Omnitronic
- Mérőberendezések Klein Tools
- Mérőberendezések Chauvin Arnoux
- Mérőberendezések Dahua Technology
- Mérőberendezések Black & Decker
- Mérőberendezések Beha-Amprobe
- Mérőberendezések Albrecht
- Mérőberendezések Livington
- Mérőberendezések Joy-It
- Mérőberendezések Eberle
- Mérőberendezések Extech
- Mérőberendezések Testo
- Mérőberendezések BaseTech
- Mérőberendezések ProfiCare
- Mérőberendezések Kübler
- Mérőberendezések Grohe
- Mérőberendezések BENNING
- Mérőberendezések Kogan
- Mérőberendezések Alecto
- Mérőberendezések Honeywell
- Mérőberendezések Pico
- Mérőberendezések Yato
- Mérőberendezések Velleman
- Mérőberendezések TFA
- Mérőberendezések Monacor
- Mérőberendezések Shimano
- Mérőberendezések Janitza
- Mérőberendezések Trotec
- Mérőberendezések Uni-T
- Mérőberendezések Rossmax
- Mérőberendezések Metrix
- Mérőberendezések Finder
- Mérőberendezések TDE Instruments
- Mérőberendezések Megger
- Mérőberendezések Pyle
- Mérőberendezések Testboy
- Mérőberendezések DeWalt
- Mérőberendezések Laica
- Mérőberendezések IFM
- Mérőberendezések Wachendorff
- Mérőberendezések Greisinger
- Mérőberendezések Sonel
- Mérőberendezések Kyoritsu
- Mérőberendezések Danfoss
- Mérőberendezések Vemer
- Mérőberendezések Emko
- Mérőberendezések Siig
- Mérőberendezések Stabila
- Mérőberendezések GoClever
- Mérőberendezések Soler & Palau
- Mérőberendezések Multimetrix
- Mérőberendezések Carrier
- Mérőberendezések Camille Bauer
- Mérőberendezések H-Tronic
- Mérőberendezések Victron Energy
- Mérőberendezések AREXX
- Mérőberendezések AS Schwabe
- Mérőberendezések Eltako
- Mérőberendezések Weidmüller
- Mérőberendezések Adwa
- Mérőberendezések Ermenrich
- Mérőberendezések Laserliner
- Mérőberendezések Kern
- Mérőberendezések Megasat
- Mérőberendezések Hikmicro
- Mérőberendezések Siglent
- Mérőberendezések Kopp
- Mérőberendezések Hazet
- Mérőberendezések Elgato
- Mérőberendezések Ideal
- Mérőberendezések Fysic
- Mérőberendezések Amprobe
- Mérőberendezések Toolland
- Mérőberendezések Meec Tools
- Mérőberendezések ABB
- Mérőberendezések Perel
- Mérőberendezések Flir
- Mérőberendezések Technoline
- Mérőberendezések Goobay
- Mérőberendezések Hager
- Mérőberendezések IHealth
- Mérőberendezések Eizo
- Mérőberendezések Comark
- Mérőberendezések Bruder Mannesmann
- Mérőberendezések RIDGID
- Mérőberendezések Westfalia
- Mérőberendezések Muller
- Mérőberendezések TFA Dostmann
- Mérőberendezések Werma
- Mérőberendezések Peak
- Mérőberendezések X-Rite
- Mérőberendezések Entes
- Mérőberendezések KS Tools
- Mérőberendezések Trumeter
- Mérőberendezések Aeros
- Mérőberendezések Delta Ohm
- Mérőberendezések Aqua Master Tools
- Mérőberendezések MGL Avionics
- Mérőberendezések PCE Instruments
- Mérőberendezések CEM
- Mérőberendezések Hameg
- Mérőberendezések CESYS
- Mérőberendezések Circutor
- Mérőberendezések Duro Pro
- Mérőberendezések Zircon
- Mérőberendezések BJZ
- Mérőberendezések Johnson Level
- Mérőberendezések GMW
- Mérőberendezések Oscium
- Mérőberendezések Sanwa
- Mérőberendezések Condtrol
- Mérőberendezések MSW
- Mérőberendezések Qubino
- Mérőberendezések Lascar Electronics
- Mérőberendezések HT Instruments
- Mérőberendezések P3 International
- Mérőberendezések Beckmann & Egle
- Mérőberendezések Seek Thermal
- Mérőberendezések INFICON
- Mérőberendezések Motrona
- Mérőberendezések Blebox
- Mérőberendezések Seaward
- Mérőberendezések HOZO Design
- Mérőberendezések Corentium
- Mérőberendezések GQ
- Mérőberendezések Tektronix
- Mérőberendezések Dostmann Electronic
- Mérőberendezések SecuTech
- Mérőberendezések NetPeppers
- Mérőberendezések SensoProtect
- Mérőberendezések Water-i.d.
- Mérőberendezések ZKETECH
- Mérőberendezések LabNation
- Mérőberendezések Electronics International
- Mérőberendezések Cliff
- Mérőberendezések ClimeMET
- Mérőberendezések Fixpoint
- Mérőberendezések AkYtec
- Mérőberendezések Stahlwille
- Mérőberendezések Enda
- Mérőberendezések Noyafa
- Mérőberendezések Stamos
Legújabb útmutatók Mérőberendezések
16 Október 2024
16 Október 2024
16 Október 2024
16 Október 2024
16 Október 2024
16 Október 2024
16 Október 2024
16 Október 2024
16 Október 2024
16 Október 2024