Használati útmutató Fluke 115C

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Fluke 115C (26 oldal) a multiméter kategóriában. Ezt az útmutatót 5 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/26
®
PN 2538695
July 2006, Rev. 1, 2/07
© 2006, 2007 Fluke Corporation, All rights reserved. Printed in China
All product names are trademarks of their respective companies.
115C and 117C
True-rms Multimeters
Users Manual
LIMITED WARRANTY AND LIMITATION OF LIABILITY
This Fluke product will be free from defects in material and workmanship for three
years from the date of purchase. This warranty does not cover fuses, disposable bat-
teries, or damage from accident, neglect, misuse, alteration, contamination, or abnor-
mal conditions of operation or handling. Resellers are not authorized to extend any
other warranty on Fluke’s behalf. To obtain service during the warranty period, contact
your nearest Fluke authorized service center to obtain return authorization information,
then send the product to that Service Center with a description of the problem.
THIS WARRANTY IS YOUR ONLY REMEDY. NO OTHER WARRANTIES, SUCH AS
FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSED OR IMPLIED. FLUKE
IS NOT LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUEN-
TIAL DAMAGES OR LOSSES, ARISING FROM ANY CAUSE OR THEORY. Since
some states or countries do not allow the exclusion or limitation of an implied warranty
or of incidental or consequential damages, this limitation of liability may not apply to
you.
Fluke Corporation
P.O. Box 9090
Everett, WA 98206-9090
U.S.A.
Fluke Europe B.V.
P.O. Box 1186
5602 BD Eindhoven
The Netherlands
11/99
1
True-rms Multimeters
Introduction
The Fluke Model 115C, and Model 117C are battery-
powered, true-rms multimeters (hereafter "the Meter")
with a 6000-count display and a bar graph. This manual
applies to both models. All figures show the Model
117C.
These meters meet CAT III IEC 61010-1 2nd Edition
standards. The IEC 61010-1 2nd Edition safety standard
defines four measurement categories (CAT I to IV)
based on the magnitude of danger from transient
impulses. CAT III meters are designed to protect
against transients in fixed-equipment installations at the
distribution level.
Contacting Fluke
To contact Fluke, call:
USA: 1-888-99-FLUKE (1-888-993-5853)
China: 010-65123435
Europe: +31 402-675-200
Japan: +81-3-3434-0181
Singapore +65-738-5655
Anywhere in the world: +1-425-446-5500
Visit Fluke's web site at www.fluke.com.
Register your Meter at register.fluke.com.
Unsafe Voltage
To alert you to the presence of a potentially
hazardous voltage, the Y symbol is displayed when
the Meter measures a voltage 30 V or a voltage
overload (OL) condition. When making frequency
measurements >1 kHz, the Y symbol is unspecified.
Test Lead Alert
XWWarning
Personal injury or damage to the
Meter can occur if you attempt to
make a measurement with a lead in an
incorrect terminal.
To remind you to check that the test leads are in the
correct terminals, LEAd is briefly displayed and an
audible beep sounds when you move the rotary
switch to or from any A (Amps) position.

Termékspecifikációk

Márka: Fluke
Kategória: multiméter
Modell: 115C

Szüksége van segítségre?

Ha segítségre van szüksége Fluke 115C, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók multiméter Fluke

Fluke

Fluke 325 Útmutató

2 Október 2024
Fluke

Fluke 283 FC Útmutató

10 Szeptember 2024
Fluke

Fluke AM-510 Útmutató

10 Szeptember 2024
Fluke

Fluke 77 IV Útmutató

2 Szeptember 2024
Fluke

Fluke 81438 Útmutató

30 Augusztus 2024
Fluke

Fluke 110 Útmutató

19 Augusztus 2024
Fluke

Fluke 115C Útmutató

18 Augusztus 2024
Fluke

Fluke 80 Series V Útmutató

18 Augusztus 2024
Fluke

Fluke 112 Útmutató

17 Augusztus 2024
Fluke

Fluke 78 Útmutató

12 Augusztus 2024

Útmutatók multiméter

Legújabb útmutatók multiméter