Használati útmutató Fantini Cosmi K17C

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Fantini Cosmi K17C (4 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 9 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/4
K17C
ANTIFREEZE HEATING CABLES
WITH CONSTANT POWER FOR ROAD RAMPS
Suitable for laying under access
ramps, parking lots, pavements
and walkways
Constant power delivered ~17 W/m
They require control thermostats
to be used
CODE CABLE
LENGTH
TOTAL
POWER
ABSORBED AT
230V
HEATED
SURFACE
WITH 130W/M
MINIMUM
INSTALLATION
ROOM
TEMPERATURE
MAXIMUM
ROOM
TEMPERATURE
K17C29 30.42 m 510 W 3 m² -5 °C 65 °C
K17C73 74.28 m 1260 W 6 m² -5 °C 65 °C
K17C82 89.34 m 1530 W 7 m² -5 °C 65 °C
K17C102 101.98 m 1750 W 9 m² -5 °C 65 °C
K17C129 124.58 m 2200 W 11 -5 °C 65 °C
OPERATION
The heating cables consist of a coil-wound
resistance on two conductors. The resistance is
in contact with the conductors through splicing
points at constant intervals; the energy to heat the
resistance is drawn at the splicing points;
The heating cables are supplied in reels of standard
length that cannot be cut or stretched;
They require L03BM1A type control thermostats.
HOMOLOGATION AND STANDARDS
K17C - HEATING CABLES WITH CONSTANT ANTIFREEZE POWER FOR ROAD RAMPS
Power supply 230V-50Hz
Constant power delivered ~17W/m
Total power absorbed at 230V K17C29 510 W
K17C73 1260 W
K17C82 1530 W
K17C102 1750 W
K17C129 2200 W
ELECTRICAL FEATURES
INSTALLATION
The two ends of the cable must be connected to
the phase and to the neutral in a special junction
box;
Along its path, the cable must not overlap and the
original length must not be cut;
It is recommended to use a sturdy flexible sheath
to protect the terminals and cold tails and for the
branches to be easily inspected after installation;
The cable will be laid at a depth of 50 mm in a bed
of sand and cement with a serpentine path with
a 100 mm pitch, therefore it is advisable to form
a path by securing the cable with KJSSP spacing
bars;
It is advisable to apply an insulating coating over
the heating cable for a correct installation.
K17C - HEATING CABLES WITH CONSTANT ANTIFREEZE POWER FOR ROAD RAMPS
GENERAL FEATURES
Cable composition 2 conductors in solid copper and tinned copper
Outer sheath in PVC
Aluminium foil shielding
Tinned copper sheath
The heating cable includes 1 standard length of heating cable
2 cold tails
Cable length K17C29 30.42 m
K17C73 74.28 m
K17C82 89.34 m
K17C102 101.98 m
K17C129 124.59 m
Heated surface with 170W/m² K17C29 3 m²
K17C73 6 m²
K17C82 7 m²
K17C102 9
K17C129 11 m²
Minimum installation room temperature -5 °C
Maximum room temperature 65 °C
Minimum storage room temperature -20 ÷ -25°C

Termékspecifikációk

Márka: Fantini Cosmi
Kategória: nincs kategorizálva
Modell: K17C

Szüksége van segítségre?

Ha segítségre van szüksége Fantini Cosmi K17C, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók nincs kategorizálva Fantini Cosmi

Útmutatók nincs kategorizálva

Legújabb útmutatók nincs kategorizálva