Használati útmutató Falcon LEIHDC120BB-EU

Falcon Páraelszívó LEIHDC120BB-EU

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Falcon LEIHDC120BB-EU (56 oldal) a Páraelszívó kategóriában. Ezt az útmutatót 3 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/56
LEIHDC90BB-EU LEIHDC120BB-EU
LEIHDC90BC-EU LEIHDC120BC-EU
LEIHDC90SC-EU LEIHDC120SC-EU
FALHDC90BB FALHDC120BB
FALHDC90BC FALHDC120BC
LEIHDC110BB-EU FALHDC90CR/C
LEIHDC110BC-EU FALHDC110CR/C
LEIHDC110SC-EU FALHDC90CY/C
FALHDC110BB FALHDC110CY/C
FALHDC110BC
RMHDC110WC/-EU
Libretto di Istruzioni
Instructions Manual
Manuel d’Instructions
Bedienungsanleitung
Gebruiksaanwijzing
Manual de Instruções
2
2
INDICE
CONSIGLI E SUGGERIMENTI ..............................................................................................................................................4
CARATTERISTICHE ..............................................................................................................................................................5
INSTALLAZIONE....................................................................................................................................................................6
USO ........................................................................................................................................................................................9
MANUTENZIONE .................................................................................................................................................................10
INDEX
RECOMMENDATIONS AND SUGGESTIONS....................................................................................................................11
CHARACTERISTICS............................................................................................................................................................12
INSTALLATION ....................................................................................................................................................................13
USE.......................................................................................................................................................................................16
MAINTENANCE....................................................................................................................................................................17
SOMMAIRE
CONSEILS ET SUGGESTIONS ..........................................................................................................................................18
CARACTERISTIQUES .........................................................................................................................................................19
INSTALLATION ....................................................................................................................................................................20
UTILISATION........................................................................................................................................................................23
ENTRETIEN..........................................................................................................................................................................24
INHALTSVERZEICHNIS
EMPFEHLUNGEN UND HINWEISE....................................................................................................................................25
CHARAKTERISTIKEN..........................................................................................................................................................26
MONTAGE............................................................................................................................................................................27
BEDIENUNG.........................................................................................................................................................................30
WARTUNG............................................................................................................................................................................31
INHOUDSOPGAVE
ADVIEZEN EN SUGGESTIES .............................................................................................................................................32
EIGENSCHAPPEN...............................................................................................................................................................33
INSTALLATIE .......................................................................................................................................................................34
GEBRUIK..............................................................................................................................................................................37
ONDERHOUD ......................................................................................................................................................................38
ÍNDICE
CONSEJOS Y SUGERENCIAS ...........................................................................................................................................39
CARACTERÍSTICAS............................................................................................................................................................40
INSTALACIÓN......................................................................................................................................................................41
USO ......................................................................................................................................................................................44
MANTENIMIENTO................................................................................................................................................................45
IT
EN
FR
DE
NL
ES
3
3
ÍNDICE
CONSELHOS E SUGESTÕES ............................................................................................................................................46
CARACTERÍSTICAS............................................................................................................................................................47
INSTALAÇÃO .......................................................................................................................................................................48
UTILIZAÇÃO.........................................................................................................................................................................51
MANUTENÇÃO ....................................................................................................................................................................52
PT
IT
4
4
CONSIGLI E SUGGERIMENTI
Questo libretto d
i istruzioni per l'uso è previsto per più versioni dell' appare
c
chio.
É possibile che siano descritti singoli particolari della dotazione, che non riguar-
dano il Vostro apparecchio.
INSTALLAZIONE
Il produttore declina qualsiasi responsabiliper danni dovuti ad installazione non
corretta o non conforme alle regole dell’arte.
La distanza minima di sicurezza tra il Piano di cottura e la Cappa deve essere di
650 mm, (alcuni modelli possono essere installati ad un’altezza inferiore, fare rife-
rimento ai paragrafi ingombro e installazione).
Verificare che la tensione di rete corrisponda a quella riportata nella targhetta
posta all’interno della Cappa.
Per Apparecchi in Classe Ia accertarsi che l’impianto elettrico domestico garanti-
sca un corretto scarico a terra.
Collegare la Cappa all’uscita dell’aria aspirata con tubazione di diametro pari o
superiore a 120 mm. Il percorso della tubazione deve essere il più breve possibi-
le.
Non collegare la Cappa a condotti di scarico dei fumi prodotti da combustione
(caldaie, caminetti, ecc.).
Nel caso in cui nella stanza vengano utilizzati sia la Cappa che apparecchi non
azionati da energia elettrica (ad esempio apparecchi utilizzatori di gas), si deve
provvedere ad una aerazione sufficiente dell’ambiente. Se la cucina ne fosse
sprovvista, praticare un’apertura che comunichi con l’esterno, per garantire il ri-
chiamo d’aria pulita.
USO
La Cappa è stata progettata esclusivamente per uso domestico, per abbattere gli
odori della cucina.
Non fare mai uso improprio della Cappa.
Non lasciare fiamme libere a forte intensità sotto la Cappa in funzione.
Regolare sempre le fiamme in modo da evitare una evidente fuoriuscita laterale
delle stesse rispetto al fondo delle pentole.
Controllare le friggitrici durante l’uso: l’olio surriscaldato potrebbe infiammarsi.
Non preparare alimenti flambè sotto la cappa da cucina; pericolo d'incendio.
Questo apparecchio non deve essere utilizzato da persone (bambini inclusi) con
ridotte capacità psichiche, sensoriali o mentali, oppure da persone senza espe-
rienza e conoscenza, a meno che non siano controllati o istruiti all’uso
dell’apparecchio da persone responsabili della loro sicurezza.
I bambini devono essere supervisionati per assicurarsi che non giochino con
l’apparecchio.
MANUTENZIONE
Prima di procedere a qualsiasi operazione di manutenzione, disinserire la Cappa
togliendo la spina elettrica o spegnendo l’interruttore generale.
Effettuare una scrupolosa e tempestiva manutenzione dei Filtri secondo gli inter-
valli consigliati (Rischio di incendio).
Per la pulizia delle superfici della Cappa è sufficiente utilizzare un panno umido e
detersivo liquido neutro.
Il simbolo sul prodotto o sulla confezione indica che il prodotto non deve essere considerato
come un normale rifiuto domestico, ma deve essere portato nel punto di raccolta appropriato per
il riciclaggio di apparecchiature elettriche ed elettroniche. Provvedendo a smaltire questo prodot-
to in modo appropriato, si contribuisce a evitare potenziali conseguenze negative per l’ambiente
e per la salute, che potrebbero derivare da uno smaltimento inadeguato del prodotto. Per infor-
mazioni p dettagliate sul riciclaggio di questo prodotto, contattare l’ufficio comunale, il servizio
locale di smaltimento rifiuti o il negozio in cui è stato acquistato il prodotto.
650 mm min.
IT
5
5
CARATTERISTICHE
Ingombro
598 - 898 - 1098 - 1198
240
4
0
490
100
150
205
210
min.495
max. 770
465
Min.
650mm
Min.
650mm
90
132
80
Componenti
Rif. Q.tà Componenti di Prodotto
1 1 Corpo Cappa completo di: Comandi, Luce, Filtri, Moto-
re
2 1 Camino Telescopico formato da:
2.1 1 Camino Superiore
2.2 1 Camino Inferiore
8a 1 Griglia direzionata Destra
8b 1 Griglia direzionata Sinistra
9 1 Flangia di Riduzione ø 150-120 mm
10 1 Anello di Maggiorazione ø 120-125 mm
15 1 Raccordouscita Aria
Rif. Q.tà Componenti di Installazione
7.1 2 Staffe Fissaggio Corpo Cappa
7.2.1 2 Staffe Fissaggio Camino Superiore
11 8 Tasselli
12a 8 Viti 4,2 x 44,4
12c 6 Viti 2,9 x 9,5
12d 2 Viti M4 x 25
Q.tà Documentazione
1 Libretto Istruzioni
15
12c
12c
2.1
2.2
2
7.2.1
12a 11
12c
9
10
7.2.1
1
8b
8a
7.1
12a 11
12d
IT
6
6
INSTALLAZIONE
Foratura Parete e Fissaggio Staffe
H 190 X 1÷2
650 min.
7.2.1
7.1 109,5109,5
Tracciare sulla Parete:
una linea Verticale fino al soffitto o al limite superiore, al centro della zona prevista per il
montaggio della Cappa;
una linea Orizzontale a: 650 mm min. sopra il Piano di Cottura, per installazione senza Fon-
dale; alla quota H (H=altezza della parte in vista del Fondale), per installazione con Fondale.
Appoggiare come indicato la Staffa 7.2.1 a 1-2 mm dal soffitto o dal limite superiore, alline-
ando il suo centro (intagli) sulla linea Verticale di riferimento.
Segnare i centri dei Fori della Staffa.
Appoggiare come indicato la Staffa 7.2.1 a X mm sotto la prima staffa (X = altezza Camino
Superiore in dotazione), allineando il suo centro (intagli) sulla linea Verticale di riferimento.
Segnare i centri dei Fori della Staffa.
Appoggiare come indicato, la Staffa 7.1 a 109,5 mm dalla linea Verticale di riferimento, e
190 mm sopra la linea Orizzontale di riferimento.
Segnare i centri dei Fori della Staffa.
Ripetere questa operazione dalla parte opposta.
FONDALE (OPZIONALE)
Il Fondale va montato prima di montare il Corpo Cappa e, se si desidera fissarlo alla parete sia
superiormente che inferiormente, è necessario montarlo alla giusta altezza, prima del montag-
gio delle basi. Essendo questa operazione complessa va effettuata solamente dall’installatore
della cucina o da personale competente che conosca tutte le dimensioni finali dei mobili.
Limitandosi al solo fissaggio superiore, procedere come segue:
Appoggiare il Fondale sulla base inserendo la faldina inferiore tra il piano superiore e la pa-
rete,
centrandolo sulla linea Verticale di riferimento.
Segnare i centri dei due fori della faldina superiore.
Forare ø 8 mm i punti segnati.
Inserire i tasselli 11 nei fori.
Fissare le Staffe, utilizzando le Viti 12a (4,2 x 44,4 ) in dotazione.
Se presente, fissare il Fondale, utilizzando le Viti 12a (4,2 x 44,4) in dotazione.
IT
7
7
Montaggio Corpo Cappa
Avvitare sulle Staffe 7.1, le 2 Viti 12d in dotazione.
Agganciare il Corpo Cappa alle Staffe 7.1, centrandolo sulla
linea verticale.
Agire sulle Viti 12d, dal sotto della Cappa, per livellare il Cor-
po Cappa.
12.d
7.1
Connessioni
USCITA ARIA VERSIONE ASPIRANTE
Per installazione in Versione Aspirante collegare la Cappa alla
tubazione di uscita per mezzo di un tubo rigido o flessibile di
ø150 o 125 mm, la cui scelta è lasciata all'installatore.
Per collegamento con tubo ø125 mm, inserire la Flangia di ri-
duzione 9 sull’Uscita del Corpo Cappa e l’anello di maggiora-
zione 10 ø120-125 sulla Flangia .
Fissare il tubo con adeguate fascette stringitubo. Il materiale
occorrente non è in dotazione.
Togliere eventuali Filtri Antiodore al Carbone attivo.
9
ø 125
10
ø 150
USCITA ARIA VERSIONE FILTRANTE
Applicare a pressione il Raccordo Uscita Aria 15 sull’Uscita
del Corpo Cappa.
Assicurarsi della presenza del Filtro Antiodore al Carbone atti-
vo.
15
IT
8
8
CONNESSIONE ELETTRICA
Collegare la Cappa all’Alimentazione di Rete interponendo un
Interruttore bipolare con apertura dei contatti di almeno 3 mm.
Rimuovere i Filtri antigrasso (vedi par. “Manutenzione”) e as-
sicurarsi che il connettore del Cavo di alimentazione sia corret-
tamente inserito nella presa dell’Aspiratore
Montaggio Camino
Camino superiore
Allargare leggermente le due falde laterali, agganciarle dietro
le Staffe 7.2.1 e richiuderle fino a battuta.
Fissare lateralmente alle Staffe con 4 Viti 12c (2,9 x 9,5) in
dotazione.
Camino inferiore
Allargare leggermente le due falde laterali del Camino, aggan-
ciarle tra il Camino superiore e la parete e richiuderle fino a
battuta.
Fissare lateralmente la parte inferiore al Corpo Cappa con 2
Viti 12c (2,9 x 9,5) in dotazione.
Per la Versione Filtrante con Griglie per uscita laterale, appli-
care le Griglie direzionate 8a 8b nelle apposite sedi, in modo
che i simboli direzionali risultino orientati verso l’alto e il fron-
te della Cappa. Assicurarsi che risultino inserite correttamente
nel Raccordo 15.
12c
8a
2.1
2.2
2
8b
7.2.1
12c
IT
9
9
USO
1
1
0
1
0
23
LM
V
L Luci Accende e spegne l’Impianto di Illuminazione.
M Motore Accende e spegne il motore Aspirazione.
V Velocità Determina la velocità di esercizio:
1. Velocità minima, adatta ad un ricambio d’aria continuo particolarmente
silenzioso,in presenza di pochi vapori di cottura.
2. Velocità media, adatta alla maggior parte delle condizioni d’uso, dato
l’ottimo rapporto tra portata d’aria trattata e livello sonoro.
3. Velocità massima, adatta a fronteggiare le massime emissioni di vapore
di cottura,anche per tempi prolungati.
IT
1
10
MANUTENZIONE
Filtri antigrasso
PULIZIA FILTRI ANTIGRASSO METALLICI AUTOPORTANTI
Sono lavabili anche in lavastoviglie, e necessitano di essere
lavati ogni 2 mesi circa di utilizzo o più frequentemente, per un
uso particolarmente intenso.
Togliere i Filtri uno alla volta, spingendoli verso la parte poste-
riore del gruppo e tirando contemporaneamente verso il basso.
Lavare i Filtri evitando di piegarli, e lasciarli asciugare prima
di rimontarli.
Rimontarli facendo attenzione a mantenere la maniglia verso la
parte visibile esterna.
Filtri antiodore al Carbone attivo (Versione Filtrante)
Il Filtro antiodore al Carbone attivo non è lavabile e non è rigene-
rabile, va sostituito ogni 4 mesi circa di utilizzo o più frequente-
mente, per un uso particolarmente intenso.
SOSTITUZIONE
Togliere i Filtri antigrasso.
Rimuovere i Filtri antiodore al Carbone attivo saturi, come in-
dicato (A).
Montare i nuovi Filtri, come indicato (B).
Rimontare i Filtri antigrasso.
A
B
Illuminazione
SOSTITUZIONE LAMPADE
Lampade alogene da 28 W
Togliere i Filtri antigrasso metallici.
Svitare le Lampade e sostituirle con nuove di uguali caratteri-
stiche.
Rimontare i Filtri antigrasso metallici.
EN
1
11
RECOMMENDATIONS AND SUGGESTIONS
The Instructions for Use apply to several versions of this app
liance. Accor
d-
ingly, you may find descriptions of individual features that do not apply to
your specific appliance.
INSTALLATION
The manufacturer will not be held liable for any damages resulting from in-
correct or improper installation.
The minimum safety distance between the cooker top and the extractor
hood is 650 mm (some models can be installed at a lower height, please re-
fer to the paragraphs on working dimensions and installation).
Check that the mains voltage corresponds to that indicated on the rating
plate fixed to the inside of the hood.
For Class I appliances, check that the domestic power supply guarantees
adequate earthing.
Connect the extractor to the exhaust flue through a pipe of minimum diame-
ter 120 mm. The route of the flue must be as short as possible.
Do not connect the extractor hood to exhaust ducts carrying combustion
fumes (boilers, fireplaces, etc.).
If the extractor is used in conjunction with non-electrical appliances (e.g. gas
burning appliances), a sufficient degree of aeration must be guaranteed in
the room in order to prevent the backflow of exhaust gas. The kitchen must
have an opening communicating directly with the open air in order to guar-
antee the entry of clean air.
USE
The extractor hood has been designed exclusively for domestic use to elimi-
nate kitchen smells.
Never use the hood for purposes other than for which it has been designed.
Never leave high naked flames under the hood when it is in operation.
Adjust the flame intensity to direct it onto the bottom of the pan only, making
sure that it does not engulf the sides.
Deep fat fryers must be continuously monitored during use: overheated oil
can burst into flames.
Do not flambè under the range hood; risk of fire
This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction concern-
ing use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appli-
ance.
MAINTENANCE
Switch off or unplug the appliance from the mains supply before carrying out
any maintenance work.
Clean and/or replace the Filters after the specified time period (Fire hazard).
Clean the hood using a damp cloth and a neutral liquid detergent.
The symbol on the product or on its packaging indicates that this product may not be treated
as household waste. Instead it shall be handed over to the applicable collection point for the
recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly,
you will help prevent potential negative consequences for the environment and human health,
which could otherwise be caused by inappropriate waste handling of this product. For more
detailed information about recycling of this product, please contact your local city office, your
household waste disposal service or the shop where you purchased the product.
650 mm min.
EN
1
12
CHARACTERISTICS
Dimensions
598 - 898 - 1098 - 1198
240
4
0
490
100
150
205
210
min.495
max. 770
465
Min.
650mm
Min.
650mm
90
132
80
Components
Ref. Q.ty Product Components
1 1 Hood Body, complete with: Controls, Light, Blower,
Filters
2 1 Telescopic Chimney comprising:
2.1 1 Upper Section
2.2 1 Lower Section
8a 1 Right Air Outlet Grill
8b 1 Left Air Outlet Grill
9 1 Reducer Flange ø 150-120 mm
10 1 Adapting ring ø 120-125 mm
15 1 Air Outlet Connection
Ref. Q.ty Installation Components
7.1 2 Hood Body Fixing Brackets
7.2.1 2 Upper Chimney Section Fixing Brackets
11 8 Wall Plugs
12a 8 Screws 4.2 x 44,4
12c 6 Screws 2.9 x 9.5
12d 2 Screws M4 x 25
Q.ty Documentation
1 Instruction Manual
15
12c
12c
2.1
2.2
2
7.2.1
12a 11
12c
9
10
7.2.1
1
8b
8a
7.1
12a 11
12d
EN
1
13
INSTALLATION
Wall drilling and bracket fixing
Wall marking:
Draw a vertical line on the supporting wall up to the ceiling, or as high as practical, at the
centre of the area in which the hood will be installed.
Draw a horizontal line at 650 mm above the hob for installation without the back panel, or at
height H (height of the visible part of the panel) for installation with the back panel.
Place bracket 7.2.1 on the wall as shown about 1-2 mm from the ceiling or upper limit,
aligning the centre (notch) with the vertical reference line.
Mark the wall at the centres of the holes in the bracket.
Place bracket 7.2.1 on the wall as shown at X mm below the first bracket (X = height of the
upper chimney section supplied), aligning the centre (notch) with the vertical line.
Mark the wall at the centres of the holes in the bracket.
Place bracket 7.1 as shown 109,5 mm from the vertical reference line and 190 mm above the
horizontal reference line.
Mark the centres of the holes in the bracket.
Repeat this operation on the other side.
REAR PANEL (OPTIONAL)
The Rear Panel must be fitted before fixing the hood body and, if it is to be fixed at both top
and bottom, must be fitted at the correct height prior to installing the bases. As this operation is
rather complex, it should be carried out either by the kitchen installer or a qualified person
who knows the final dimensions of the units.
For fixing at the top only, proceed as follows:
Rest the back panel on the base, inserting the lower plate between the upper surface and the
wall, centring it on the vertical reference line.
Mark the centres of the two holes in the upper plate.
Drill ø 8 mm holes at all the centre points marked.
Insert the wall plugs 11 in the holes.
Fix the brackets using the 12a screws supplied.
Fix the back panel (where present) using the 12a screws supplied.
H 190 X 1÷2
650 min.
7.2.1
7.1 109,5
109,5
EN
1
14
Mounting the hood body
Screw the two screws 12d supplied onto the brackets 7.1.
Hook the hood body onto the bracket 7.1, centring it around
the vertical line.
Use the adjusting screws 12d underneath the hood to level the
hood body.
12.d
7.1
Connections
DUCTED VERSION AIR EXHAUST SYSTEM
When installing the ducted version, connect the hood to the
chimney using either a flexible or rigid pipe ø 150 or 125 mm,
the choice of which is left to the installer.
To install a ø 125 mm air exhaust connection, insert the re-
ducer flange 9 on the hood body air outlet and the adapting
ring ø120-125 10 on the reducer flange.
Fix the pipe in position using sufficient pipe clamps (not sup-
plied).
Remove any activated charcoal filters.
9
ø 125
10
ø 150
RECIRCULATION VERSION AIR OUTLET
Push fit the air outlet fitting 15 onto the air outlet of the hood
body.
Ensure that the activated charcoal filters have been inserted.
15
E
N
1
15
ELECTRICAL CONNECTION
Connect the hood to the mains through a two-pole switch hav-
ing a contact gap of at least 3 mm.
Remove the grease filters (see paragraph Maintenance) being
sure that the connector of the feeding cable is correctly inserted
in the socket placed on the side of the fan.
Chimney assembly
Upper chimney section
Slightly widen the two sides of the upper chimney and hook
them behind the brackets 7.2.1, making sure that they are prop-
erly housed.
Secure the sides to the brackets using the 4 screws 12c (2,9 x
9,5) supplied.
Lower chimney section
Slightly widen the two sides of the section and hook them be-
tween the upper section and the wall, making sure that they are
properly housed.
Fix the sides of the bottom section to the hood body using the 2
screws 12c (2,9 x 9,5) supplied.
When installing the recirculation version, fit the directional
grills 8a 8b in their housings so that the directional symbols
are at the top and towards the front of the hood. Ensure that
they are inserted correctly in the outlet connection piece 15.
12c
8a
2.1
2.2
2
8b
7.2.1
12c
EN
1
16
USE
1
1
0
1
0
23
LM
V
L Light Switches the lighting system on and off
M Motor Switches the extractor motor on and off
V Speed Sets the operating speed of the extractor:
1. Low speed, used for a continuous and silent air change in the presence of
light cooking vapour.
2. Medium speed, suitable for most operating conditions given the optimum
treated air flow/noise level ratio.
3. Maximum speed, used for eliminating the highest cooking vapour emis-
sion, including long periods.

Termékspecifikációk

Márka: Falcon
Kategória: Páraelszívó
Modell: LEIHDC120BB-EU

Szüksége van segítségre?

Ha segítségre van szüksége Falcon LEIHDC120BB-EU, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók Páraelszívó Falcon

Útmutatók Páraelszívó

Legújabb útmutatók Páraelszívó