Használati útmutató Empisal S4D

Empisal varrógép S4D

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Empisal S4D (32 oldal) a varrógép kategóriában. Ezt az útmutatót 6 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF

Oldal 1/32

MODEL: S4D

INSTRUCTION MANUAL

EMPISAL COMPLETE FREE ARM OVER LOCKER

your creative assistant

- 1 -

Safety instructions

Like any other electrical device, a overlock

machine can cause serious, even

life-threatening injuries.To avoid this, and in

order to work safely:

• Before initial use of your overlock machine,

read these operating instructions thoroughly.

• Keep the operating instructions in a suitable

place near the machine. When passing the

appliance on to others, always enclose the

operating instructions.

• Always disconnect the power supply when

leaving the machine unattended. This will

prevent the risk of accidents if the machine is

switched on accidentally.

• First pull the power plug before changing the

bulb or performing maintenance work on the

machine.

This will prevent possibly life-threatening

electric shocks.

• Do not remove the plug from the socket by

pulling on the cable. Always grip the plug and

not the cable when pulling out the power

plug.

• Only use the overlock machine in dry rooms.

• In case of any visible damage on the

machine, the foot switch or the power cable:

Have the damage repaired by Customer

Service before using the overlock machine

again.

• Never let children or elderly persons handle

the machine unsupervised because they may

not properly appreciate the possible dangers.

Keep electrical appliances outside the reach

of children.

• Never use the machine when the ventilation

apertures are blocked. Keep the ventilation

apertures of the machine and the foot switch

free from fluff, dust and waste material.

• This machine is not intended for use by

persons (including children) with reduced

physical, sensory or mental capabilities, or

lack of experience and knowledge, unless

they have been given supervision or

instruction concerning use of the appliance

by a person responsible for their safety.

• Children should be supervised to ensure that

they do not play with the machine

Warning

against injuries and

material damages:

According to legislation, you as the user of an

electrical appliance are responsible for preventing

possible accidents through safety-conscious

behaviour:

• Keep your work space tidy. An untidy workplace

can lead to accidents.

• Provide adequate lightingwhen working!

• Do not wear loose clothing or jewellery,as these

can be caught in the moving parts. You should

also wear a hair net if you have long hair.

• Avoid abnormal posture. Remain steady and in

a well-balanced position at all times.

• Be alert! Pay attention to what you are doing.

Always take a rational approach to your work.

Never work with the overlock machine if you are

unable to concentrate or if you are feeling

unwell!

If accidents occur as a result of handling the

machine with insufficient care, or failure to follow

the safety instructions in this manual, then the

manufacturer cannot accept liability.

If the supply cord that fixed with foot controller is

damaged, it must be replaced by the

manufacturer or its service agent or a similar

qualified person in order to avoid a hazard.

Please use for your overlock machine the

ZHEJIANG FOUNDER presser foot, type

KD-2902.

Power rating: 220 - 230V ~ , 50Hz

Current rating: 1.0A

Protection Class : II

- 2 -

INTRODUCTION

THANK YOU FOR CHOOSING OUR OVERLOCK MACHINE

This overlock machine can stitch dependable seams on all kinds of fabric, both light and heavy,

including cotton, wool, rayon, tricot, jersey, and knits.

You do not need a special table for this portable machine.

We suggest that you read this instruction manual carefully before you start to operate the machine.

FOR YOUR SAFETY

1. Keep your eyes on the needles when operating the overlock machine. Do not touch the

handwheel, the cutter or the needles when the machine is running.

2. Turn off the power switch, and pull out the plug from electric socket in the following cases:

＊ When you have finished your sewing.

＊ When you leave the serger temporarily.

＊ When replacing the parts.

＊ When cleaning and adjusting the machine.

BEFORE YOU USE

1. Wipe dust and oil off the machine to avoid any stains on the sewing materials.

2. Test sew by using the same sewing materials you intend to sew.

3. Read this instruction manual thoroughly before replacing the cutters and the needles. Follow the

instructions for correct replacements and adjustments.

Termékspecifikációk

Márka:	Empisal
Kategória:	varrógép
Modell:	S4D

Szüksége van segítségre?

Ha segítségre van szüksége Empisal S4D, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek

Az Ön neve*

Az Ön e-mail címe*

Írja ide kérdését

Útmutatók varrógép Empisal

Empisal 760C Útmutató

2 Szeptember 2024

Empisal EMSM12 Útmutató

2 Szeptember 2024

Empisal EEMC220 Útmutató

2 Szeptember 2024

Empisal Dress Maker 120A Útmutató

30 Augusztus 2024

Empisal Companion 500D Útmutató

30 Augusztus 2024

Empisal Companion 303E Útmutató

30 Augusztus 2024

Empisal Expression 889 Útmutató

30 Augusztus 2024

Empisal EECM9900 Útmutató

23 Augusztus 2024

Empisal 406E Útmutató

23 Augusztus 2024

Empisal 303E Útmutató

23 Augusztus 2024

Útmutatók varrógép

Legújabb útmutatók varrógép

Pfaff 463H Útmutató

15 Január 2025

Elna Lotus ZZ Útmutató

14 Január 2025

Brother Aveneer EV1-LE Útmutató

14 Január 2025

Brother Aveneer EV1 Útmutató

14 Január 2025

Necchi Maximatic 586 Útmutató

13 Január 2025

Juki MS-1190 Útmutató

12 Január 2025

Pfaff 295-1 Útmutató

12 Január 2025

Brother Innov-is NV-180 Útmutató

12 Január 2025

Baby Lock Imagine 2 Útmutató

12 Január 2025

Alfa 1412 Útmutató

12 Január 2025