Használati útmutató Elna eXpressive 940
Olvassa el alább 📖 a magyar nyelvű használati útmutatót Elna eXpressive 940 (87 oldal) a varrógép kategóriában. Ezt az útmutatót 9 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra
Oldal 1/87
| Instruction Manual |
eXpressive 940
IMPORTANT SAFETY INSTRUCTIONS
The machine is not intended for use by children or mentally infirm persons without proper supervision.
This machine is designed and manufactured for household use.
When using an electrical appliance, basic safety precautions should always be followed, including the followings:
Read all instructions before using this machine.
DANGER To reduce the risk of electric shock:
1. The machine should never be left unattended when plugged in. Always unplug this machine from the
electric outlet immediately after using and before cleaning.
WARNING To reduce the risk of burns, fire, electric shock, or injury to persons:
1. Do not allow the machine to be used as a toy. Close attention is necessary when this machine is
used by or children.
2. Use this machine only for its intended use as described in this instruction book.
3. Never operate this machine if it has a damaged cord or plug, if it is not working properly, if it has
been dropped or damaged, or dropped into water.
Return this machine to the nearest authorized dealer or service center for examination, repair,
electrical or mechanical adjustment.
4. Never operate this machine with any air openings blocked. Keep ventilation openings of this
machine free from accumulation of lint, dust and loose cloth.
5. Never drop or insert any object into any opening.
6. Do not use outdoors.
7. Do not operate where aerosol (spray) products are being used or where oxygen is being administered.
8. Connect this machine to a properly grounded outlet only. See Grounding Instructions.
9. To disconnect, turn all controls to the off (“O”) position, then remove plug from outlet.
10. Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
11. Keep fingers away from all moving parts. Special care is required around the machine needle.
12. Do not use bent needles.
13. Do not hold the embroidery hoop while stitching. It may deflect the needle causing it to break.
14. Switch the machine off (“o”) when making any adjustment in the needle area, such as threading the
needle with your hand, changing the needle, inserting the bobbin, and the like.
15. Always unplug this machine from the electrical outlet when making any adjustments mentioned in
this instruction book.
SAVE THESE INSTRUCTIONS
The design and specifications are subject to change without a prior notice.
Please note that on disposal, this product must be safely recycled in accordance with relevant
National legislation relating to electrical/electronic products. If in doubt please contact your retailer
for guidance. (European Union only)
I
GROUNDING INSTRUCTIONS
This product must be grounded. In the event of malfunction or breakdown, grounding provides a path of least
resistance for electric current to reduce the risk of electric shock.
This product is equipped with a cord having an equipment grounding conductor and a grounding plug.
The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with
all local codes and ordinances.
DANGER Improper connection of the equipment-grounding conductor can result in a risk of
electric shock.
1. The conductor with insulation having an outer surface that is green with or without yellow stripes is the
equipment-grounding conductor.
2. If repair or replacement of the cord or plug is necessary, do not connect the equipment-grounding
conductor to a live terminal.
3. Check with a qualified electrician or serviceman if the grounding instructions are not completely
understood, or if in doubt as to whether the product is properly grounded.
Do not modify the plug provided with the product if it will not fit the outlet, have a proper outlet installed by
a qualified electrician.
4. This product has a grounding plug that looks like the plug illustrated in Fig. A. A temporary adaptor, which
looks like the adaptor illustrated in Fig. C, may be used to connect this plug to a 2-pole receptacle as shown in
Fig B. If a properly grounded outlet is not available, the temporary adapter should be used only until a
properly grounded outlet can be installed by a qualified electrician.
The green colored rigid ear, lug, and the like, extending from the adaptor must be connected to a permanent
ground such as a properly grounded outlet box cover. Whenever the adaptor is used, it must be held in place
by the metal screw.
Fig. A
Fig.B Fig.C
Metal screw
grounding means
Fig.C
II
Termékspecifikációk
| Márka: | Elna |
| Kategória: | varrógép |
| Modell: | eXpressive 940 |
Szüksége van segítségre?
Ha segítségre van szüksége Elna eXpressive 940, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók varrógép Elna
14 Január 2025
1 Szeptember 2024
31 Augusztus 2024
23 Augusztus 2024
22 Augusztus 2024
21 Augusztus 2024
21 Augusztus 2024
21 Augusztus 2024
21 Augusztus 2024
21 Augusztus 2024
Útmutatók varrógép
- varrógép Husqvarna
- varrógép SilverCrest
- varrógép Singer
- varrógép AEG
- varrógép Emerio
- varrógép Toyota
- varrógép Siemens
- varrógép Medion
- varrógép Carina
- varrógép Prixton
- varrógép Primera
- varrógép Ambiano
- varrógép Privileg
- varrógép Pfaff
- varrógép Brother
- varrógép Janome
- varrógép Solac
- varrógép Necchi
- varrógép Bernette
- varrógép Juki
- varrógép Guzzanti
- varrógép Baby Lock
- varrógép TriStar
- varrógép Kenmore
- varrógép Husqvarna-Viking
- varrógép Blaupunkt
- varrógép Easy Home
- varrógép Crofton
- varrógép Alfa
- varrógép Veritas
- varrógép Union Special
- varrógép Bernina
- varrógép Dürkopp Adler
- varrógép Bestron
- varrógép Victoria
- varrógép EasyMaxx
- varrógép Anker-Bernette
- varrógép Sinbo
- varrógép Jata
- varrógép Mellerware
- varrógép Termozeta
- varrógép Jocca
- varrógép Yamato
- varrógép Kayser
- varrógép RCE
- varrógép Lifetec
- varrógép Kunft
- varrógép Lervia
- varrógép Vendomatic
- varrógép Home Electric
- varrógép Empisal
- varrógép Lewenstein
- varrógép Durabase
- varrógép Meister Craft
- varrógép Micromaxx
- varrógép Yamata
- varrógép Weasy
- varrógép Łucznik
- varrógép Silver
- varrógép Prince
- varrógép Hofmann
- varrógép Kohler
- varrógép Muller
- varrógép Sinojo
- varrógép Huskystar
- varrógép Gritzner
- varrógép LERAN
- varrógép W6
- varrógép Zippy
- varrógép Feiyue
- varrógép Mediashop
- varrógép ER
- varrógép Novamatic
- varrógép Siemssen
- varrógép Mio Star
- varrógép SteamMax
Legújabb útmutatók varrógép
15 Január 2025
14 Január 2025
14 Január 2025
13 Január 2025
12 Január 2025
12 Január 2025
12 Január 2025
12 Január 2025
12 Január 2025
12 Január 2025