Használati útmutató Elmo ESD-CC1

Elmo nincs kategorizálva ESD-CC1

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Elmo ESD-CC1 (28 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 2 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/28
Multi-function
CCTV control keyboard
ESD-CC1
Users’ Manual
Version 3.0
The lightning flash with the arrowhead symbol,
within an equilateral triangle, is intended to alert the
user to the presence of uninsulated ’’dangerous
voltage’’ within the products enclosure that maybe
of sufficient magnitude to constitute a risk of electric
shock to persons.
CAUTION!
RISK OF ELECTRIC SHOCK
DO NOT OPEN!
WARNING!
TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR
MOISTURE.
The exclamation point, within an equilateral
triangle, is intended to alert the user to the
p
resence of important operating and
maintenance (servicing) instructions in the
literature accompanying the products.
!
WARNING!
This equipment generates, uses and can radiate radio frequency energy and if not installed and used in
accordance with the instructions in this manual, may cause interference to radio communications. It has been
tested and found to comply with the limits for a Class A computing device pursuant to subpart J of part 15 o
f
FCC rules which are designed to provide reasonable protection against such interference when operated in a
commercial environment. This equipment has also been tested and found to comply with the requirements
for a CE Class A device safety standards.
Operation of this equipment in a residential area may cause interference, in which case the user is required to
take all measures are necessary, at the user’s expense, to correct the interference.
!
Table Of Contents
1. General Introduction……………………………………………………………………………4
2. Front Panel & Real Panel……………………………………………………………………….5
2.1 Front Panel………………………………………………………………………………….5
2.2 Rear Connector Panel……………………………………………………………………….6
2.3 Switch setting on rear connector PCB……………………………………………………... 6
3. Installation………………………………………………………………………………………7
3.1 RS485 cable………………………………………………………………………………...7
3.2 Cable connections…………………………………………………………………………..7
4. Operations………………………………………………………………………………………8
4.1 Power On…………………………………………………………………………………...8
4.2 Camera Control Mode……………………………………………………………………...8
4.2.1 OSD Camera Setting…………………………………………………………………..9
4.2.2 Joystick………………………………………………………………………………..9
4.2.3 Set Preset and Run Preset……………………………………………………………..9
4.2.4 Sequence setting and execution……………………………………………………….9
4.2.5 Auto-Pan……………………………………………………………………………..10
4.2.6 Cruise………………………………………………………………………………...11
4.2.7 Zoom/Focus Lens Control…………………………………………………………...12
4.2.8 Camera settings (All camera settings)……………………………………………12-15
4.3 System Setting Mode……………………………………………………………………...15
4.3.1 System Linking………………………………………………………………………16
4.3.2 Set Keyboard ID……………………………………………………………………..16
4.3.3 System Monitor Setting……………………………………………………………...16
4.3.4 RS-232 Baud Rate Setting…………………………………………………………...17
4.3.5 Date Setting…………………………………………………………………………..17
4.3.6 Time Setting………………………………………………………………………….17
4.3.7 System Date/Time Correction………………………………………………………..18
4.3.8 System Alarm List……………………………………………………………………18
4.3.9 Camera Type & Class………………………………………………………………...18
4.3.10 Key Press Beep……………………………………………………………………...19
4.3.11 Alarm Reaction……………………………………………………………………...19
4.3.12 Password Set………………………………………………………………………...19
4.4 Multiplexer Control………………………………………………………………………..19
4.5 The control and setting of Video Matrix Switcher………………………………………...19
5. Troubleshooting………………………………………………………………………………..20
Appendix A. RS485 Communication………………………………………………………………21
A.1 Connector (RJ-11 6P6C)…………………………………………………………………..21
A.2 ID Address Mapping………………………………………………………………………21
Appendix B. Technical Specifications……………………………………………………………...22
Appendix C. The Architecture of SuperMPX and SuperMMX………………………………...23-24
Appendix D. Commands Tree of Operating and Setting………………………………………..25-26
Appendix E. Software upgrade…………………………………………………………………….27

Termékspecifikációk

Márka: Elmo
Kategória: nincs kategorizálva
Modell: ESD-CC1

Szüksége van segítségre?

Ha segítségre van szüksége Elmo ESD-CC1, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók nincs kategorizálva Elmo

Elmo

Elmo HS-2 Útmutató

3 Szeptember 2024
Elmo

Elmo TSN400A Útmutató

3 Szeptember 2024
Elmo

Elmo CC431E Útmutató

3 Szeptember 2024
Elmo

Elmo EV-2000AF Útmutató

3 Szeptember 2024
Elmo

Elmo TSE270X Útmutató

3 Szeptember 2024
Elmo

Elmo PentaClass ABM Útmutató

3 Szeptember 2024
Elmo

Elmo PentaClass AB Útmutató

3 Szeptember 2024
Elmo

Elmo TT-02S Útmutató

3 Szeptember 2024
Elmo

Elmo PTC-401C IP Útmutató

3 Szeptember 2024
Elmo

Elmo LX-2200 Útmutató

3 Szeptember 2024

Útmutatók nincs kategorizálva

Legújabb útmutatók nincs kategorizálva

Roland

Roland SD-20 Útmutató

16 Október 2024
SilverCrest

SilverCrest SRG 1300 C3 Útmutató

16 Október 2024
IFM

IFM TY0058 Útmutató

16 Október 2024
Thule

Thule Kit 186039 Útmutató

16 Október 2024
Blumfeldt

Blumfeldt Solidflor Útmutató

16 Október 2024
Dimplex

Dimplex QRAD200E Útmutató

16 Október 2024
DAS Audio

DAS Audio AX-112-5 Útmutató

16 Október 2024
Ferplast

Ferplast Ergocomfort Freetime Útmutató

16 Október 2024
AEG

AEG MECK52 Útmutató

16 Október 2024
Black Diamond

Black Diamond BD1121530000ALL1 Útmutató

16 Október 2024