Használati útmutató Elkron P441

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Elkron P441 (6 oldal) a Biztonság kategóriában. Ezt az útmutatót 3 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/6
1/6
I pulsanti P441 e P442 sono stati progettati secondo la norma Europea EN 54-11. Pertanto possono essere impiegati sia nella
RILEVAZIONE INCENDIO che nella SEGNALAZIONE EVACUAZIONE.
IDENTIFICATORE DI ATTIVAZIONE
Il pulsante attivato è identificato dalla placchetta che viene alzata all’atto della pressione. In questo caso l’identificazione è
univoca.
RIARMO DEL PULSANTE DOPO UNA PRESSIONE
Dopo un’avvenuta pressione, mediante la chiave a corredo, è possibile riarmare il pulsante e riportarlo in posizione di riposo:
TEST DEL PULSANTE
È possibile testare il pulsante senza compromettere il sigillo della copertura, con la chiave di TEST opzionale cod. 80FI*LT.
P441 - P442
Pulsante di segnalazione giallo P441 e blu P442
DS80SB72-001
ITALIANO
Posizione
di riposo
Posizione
di attivazione
OPERAZIONE 2
Spingere la chiave verso l’interno
fino all’attivazione del pulsante
OPERAZIONE 1
Introdurre la chiave come
indicato qui sopra (le frecce
rivolte verso l’alto del pulsante)
OPERAZIONE 4
Ruotare la chiave
di 90° ed estrarla
OPERAZIONE 3
Tirare la chiave
verso l’esterno
(questa azione
comporta il riarmo
del pulsante)
OPERAZIONE
2
Ruotare la chiave
di 90°
OPERAZIONE 1
Introdurre la chiave
come indicato qui
sopra
2/6
COMPONENTI / ACCESSORI
CARATTERISTICHE TECNICHE
COLORE Giallo, Blu
CORRENTE CONTATTO 3A (24Vdc)
TIPO DI CONNESSIONE Morsetti
GRADO DI PROTEZIONE IPX0
CONDIZIONI AMBIENTALI DI LAVORO Da -10 a +50°C
UMIDITÀ RELATIVA 95% senza condensa
TIPO DI MATERIALE STRUTTURA ABS
TIPO DI MATERIALE COPERTURA Policarbonato
DIMENSIONI 98 x 98 x 48 mm (B x A x P)
DIRETTIVA 2012/19/UE DEL PARLAMENTO EUROPEO E DEL CONSIGLIO del 4 luglio 2012 sui rifiuti di
apparecchiature elettriche ed elettroniche (RAEE).
Il simbolo del cassonetto barrato riportato sull’apparecchiatura o sulla sua confezione indica che il
prodotto alla fine della propria vita utile deve essere raccolto separatamente dagli altri rifiuti.
L’utente dovrà, pertanto, conferire l’apparecchiatura giunta a fine vita agli idonei centri comunali di
raccolta differenziata dei rifiuti elettrotecnici ed elettronici. In alternativa alla gestione autonoma è
possibile consegnare l’apparecchiatura che si desidera smaltire al rivenditore, al momento dell’acquisto
di una nuova apparecchiatura di tipo equivalente.
Presso i rivenditori di prodotti elettronici con superficie di vendita di almeno 400 m2 è inoltre possibile consegnare
gratuitamente, senza obbligo di acquisto, i prodotti elettronici da smaltire con dimensione massima inferiore a 25
cm.
L’adeguata raccolta differenziata per l’avvio successivo dell’apparecchiatura dismessa al riciclaggio, al
trattamento e allo smaltimento ambientalmente compatibile contribuisce ad evitare possibili effetti negativi
sull’ambiente e sulla salute e favorisce il reimpiego e/o riciclo dei materiali di cui è composta l’apparecchiatura.
ELKRON
Tel. +39 011.3986711 - Fax +39 011.3986703
www.elkron.com mail to: info@elkron.it
ELKRON è un marchio commerciale di URMET S.p.A.
Via Bologna 188/C – 10154 Torino (TO) Italia
HU
www.urmet.com
U
H
1
LEGENDA
1: Kit di piombatura PR (opzionale cod. 80FI*PR)
2: Copertura basculante
3: Base per incasso
4: Chiave di riarmo
5: Chiave di test LT (opzionale cod. 80FI*LT)
MADE IN SPAIN
2
5
3
4
3/6
The buttons P441 and P442 have been designed according to the European standard EN 54-11. Therefore they can be used in
both FIRE DETECTION and EVACUATION SIGNALING.
ACTIVATION IDENTIFIER
The activated button is identified by the plate that is raised when pressed. In this case the identification is univocal.
RESETTING THE BUTTON AFTER A PRESS
After pressing, using the key supplied, it is possible to reset the button and return it to the rest position:
BUTTON TEST
You can test the button without compromising the seal of the cover, with the optional TEST key cod. LT.
Resting
position
A
ctivation
position
STEP
2
Push the key inwards until the
button is activated
STEP
1
Insert the key as indicated above
(the arrows pointing upwards
from the button)
STEP
4
Turn the key 90 °
and remove it
STEP
3
Pull the key
outwards (this
action involves
resetting the
button)
STEP
2
Turn the key 90 °
STEP
1
Insert the key as
indicated above
P441 - P442
Yellow and blue signal button P441 and P442
DS80SB72-001
ENGLISH

Termékspecifikációk

Márka: Elkron
Kategória: Biztonság
Modell: P441

Szüksége van segítségre?

Ha segítségre van szüksége Elkron P441, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók Biztonság Elkron

Elkron

Elkron 80TC4L00133 Útmutató

24 Augusztus 2024
Elkron

Elkron IR600VC Útmutató

24 Augusztus 2024
Elkron

Elkron 80TC9M00133 Útmutató

24 Augusztus 2024
Elkron

Elkron ELR600RT-20 Útmutató

24 Augusztus 2024
Elkron

Elkron IT500CLOUD Útmutató

24 Augusztus 2024
Elkron

Elkron ER600 Útmutató

24 Augusztus 2024
Elkron

Elkron HPA702L Útmutató

24 Augusztus 2024
Elkron

Elkron 80TH5600133 Útmutató

24 Augusztus 2024
Elkron

Elkron EL100RT Útmutató

24 Augusztus 2024
Elkron

Elkron IRP600 Útmutató

24 Augusztus 2024

Útmutatók Biztonság

Legújabb útmutatók Biztonság