Használati útmutató Elite Screens VMAX Plus 4 VMAX200UWV

Elite Screens Vetítővászon VMAX Plus 4 VMAX200UWV

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Elite Screens VMAX Plus 4 VMAX200UWV (8 oldal) a Vetítővászon kategóriában. Ezt az útmutatót 2 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/8
1
Rev.010512-AS
www.elitescreens.com info@elitescreens.com
Electric Motorized Projection Screen
VMAX PLUS 4 SERIES
User’s Guide
2
Rev.010512-AS
www.elitescreens.com info@elitescreens.com
Make sure to read this user’s guide and follow the procedure below.
Cauon: The screen’s Black Top Drop is already set to its maximum drop distance. There is NO extra Black
Top Drop in the roller. Please be aware of this as it will void your warranty with Elite Screens. Unapproved
changes or modicaons (except for cung the power cord for hardwire installaons) to this unit are
prohibited and will void your warranty. For more informaon, please contact our Technical Support
Department at (877) 511-1211 Ext. 604.
Please retain this user’s guide for future reference.
To avoid damaging the unit, do not use with any unauthorized accessories not
recommended by the manufacturer.
Handle the unit carefully during transportaon to avoid any damages.
To ensure safe and reliable operaon, direct connecon to a properly grounded power
source is advised.
The power outlet supplying power to the unit should be close to the unit and easily
accessible.
Do not install the unit on uneven or inclined surfaces.
Do not put heavy objects on the power cord and posion it properly to avoid creang a
trip obstacle.
Never overload the power cord to prevent an electric shock or re due to a loose
contact or a short circuit.
There are not user serviceable parts in this unit. Do not aempt to disassemble this unit
by yourself. No one except authorized technicians can open and make repairs to this
unit.
Make sure the power source this unit is connected to has a connuous power ow.
If there is need to use an extension cord, make sure the cord has an equal rang as the
appliance to avoid overheat.
Do not handle the power plug when your hands are wet or your feet are in contact with
water.
Do not use this unit under the following circumstances.
Disconnect the power cord under the condions of heavy rain, wind, thunder or
lightning.
Avoid direct Sunshine, rain shower and moisture.
Keep away from re sources and high temperature to prevent this device from
overheang.
Cut o the power supply rst before transportaon or maintenance.
Fully disconnect from the power supply when the unit is not in use for a long period of
me, as should be done with any other electric household appliance.
To avoid possible injury and/or an electric shock, do not aempt to use the screen if
there is obvious damage or if there are any evident broken parts.
Important Safety & Warning Precautions
3
Rev.010512-AS
www.elitescreens.com info@elitescreens.com
Due to various installaon environments, the instrucons provided in this user’s guide are for
reference only. Please consult a professional installaon company for further installaon and
safety advice. The installer must insure that proper mounng hardware is used to provide
adequate strength suitable for the installaon. Elite Screens is not liable for any faulty
installaons.
The Screen’s Top Black Drop is already set to its maximum drop distance. There is extra top black NO
drop in the roller. Please be aware of this as it will void the limitaon of your warranty.
Individual modicaons to this product are prohibited and will void the warranty with the
manufacturer. Please contact Elite Screens Customer Service for any quesons.
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protecon against harmful interference in a residenal
installaon. This equipment generates and can radiate radio frequency energy and, if not installed and
used in accordance with the instrucons, may cause harmful interference to radio communicaons.
However, there is no guarantee that the interference will not occur on a parcular installaon. If this
equipment causes harmful interference to radio or television recepon, which can be determined by
turning the equipment o and on, the user is encouraged to try to correct the interference by one or
more of the following measures.
Reorient or relocate the receiving antenna of the device which may be casing the interference.
Increase the separaon between the screen and the device’s receiver.
Connect the equipment into a dierent power outlet other than the device.
1. Carefully unpack the screen.
2. Always handle the screen in a leveled posion on a clean surface.
3. In order to protect the screen from exposure to stains, keep the screen out of contact with
foreign parcles such as dust, sawdust, and/or liquids.
Regardless of the mounng method, the screen should be securely supported so that the vibraon or
pulling on the viewing surface will not cause the casing to become loose or fall. The installer must insure
that the fasteners used are of adequate strength and suitable for the installaon locaon.
Installation Warning
Pre-Installation
NOTE

Termékspecifikációk

Márka: Elite Screens
Kategória: Vetítővászon
Modell: VMAX Plus 4 VMAX200UWV

Szüksége van segítségre?

Ha segítségre van szüksége Elite Screens VMAX Plus 4 VMAX200UWV, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók Vetítővászon Elite Screens

Útmutatók Vetítővászon

Legújabb útmutatók Vetítővászon