Használati útmutató Elite Screens Spectrum Electric 100
Elite Screens
Vetítővászon
Spectrum Electric 100
Olvassa el alább 📖 a magyar nyelvű használati útmutatót Elite Screens Spectrum Electric 100 (4 oldal) a Vetítővászon kategóriában. Ezt az útmutatót 3 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra
Oldal 1/4
Rev. BR030218 www.elitescreens.com 1
Spectrum Series
Electric/Motorized Projection Screen
User Guide
Important Safety & Warning Precautions
Make sure to read this user’s guide and follow the procedure below.
Caution: The screen’s Black Top Drop is already set to its maximum drop distance. There is NO extra Black
Top Drop in the roller. Please be aware of this, as it will void your warranty with Elite Screens. Unapproved
changes or modifications (except for cutting the power cord for hardwire installations) to this unit are
prohibited and will void your warranty. For more information, please contact our Technical Support
Department at (877) 511-1211 Ext. 604.
• Please retain this user’s guide for future reference.
• To avoid damaging the unit, do not use with any unauthorized accessories not recommended by the
manufacturer.
• Handle the unit carefully during transportation to avoid any damages.
• To ensure safe and reliable operation, direct connection to a properly gr ounded power source is advised.
• The power outlet supplying power to the unit should be close to the unit and easily accessible.
• Do not install the unit on uneven or inclined surfaces.
• Do not put heavy objects on the power cord and position it properly to avoid creating a trip obstacle.
• Never overload the power cord to prevent an electric shock or fire due to a loose contact or a short circuit.
• There are not user serviceable parts in this unit. Do not attempt to disassemble this unit by yourself. No one
except authorized technicians can open and make repairs to this unit.
• Make sure the power source this unit is connected to has a continuous power flow.
• If there is need to use an extension cord, make sure the cord has an equal rating as the appliance to avoid
overheat.
• Do not handle the power plug when your hands are wet or your feet are in contact with water.
Do not use this unit under the following circumstances.
• Disconnect the power cord under the conditions of heavy rain, wind, thunder or lightning.
• Avoid direct Sunshine, rain shower and moisture.
• Keep away from fire sources and high temperature to prevent this device from overheating.
• Cut off the power supply first before transportation or maintenance.
• Fully disconnect from the power supply when the unit is not in use for a long period of time, as should be done
with any other electric household appliance.
• To avoid possible injury and/or an electric shock, do not attempt to use the screen if there is obvious damage
or if there are any evident broken parts.
Rev. BR030218 www.elitescreens.com 2
Installation Warning
Individual modifications to this product are prohibited and will void the warranty with the manufacturer. Please
contact Elite Screens Customer Service for any questions.
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that the interference will not occur on a particular installation. If this equipment causes
harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following measures.
Reorient or relocate the receiving antenna of the device which may be casing the interference.
Increase the separation between the screen and the device’s receiver.
Connect the equipment into a different power outlet other than the device
Pre-Installation
1. Carefully unpack the screen.
2. Always handle the screen in a leveled position on a clean surface.
3. In order to protect the screen from exposure to stains, keep the screen out of contact with foreign particles such
as dust, sawdust, and/or liquids.
Accessories List
A. IR remote x 1
B. 3-way wall
switch x 1
C. 12-volt trigger
cable x 1
D. Bubble level x 1
E. AAA batteries x 2
Rev. BR030218 www.elitescreens.com 3
Control System
1. 5-12V Trigger: The built- -12V trigger input in 5
allows your screen to synchronize its drop & rise with
the projector’s power cycle. The screen deploys when
the projector powers up and will retract when the
projector powers down. The 5-12 volt adaptor
connects to your projector’s trigger output via a
separate cable that may or may not be provided by the
manufacturer of the projector. The trigger feature will
not work without an output cable from the projector,
but it can be tested by connecting the Red (+) and
Green ( ) cable to a 9- -volt battery.
3- prong power cable
RJ- -45 inp ut for 5 12V Trigger
Red: DC 12 +
Green: 0 V -
5-12 Volt Trigger Cable
IR
“Eye”
Receiver
4. IR Remote Control: The Infrared
functions by direct line of sight contact
with a beam range of 30 feet.
5. RF Remote Control: (sold separately)
The radio waves eliminate the need for a direct
line of sight with a range of 150 feet.
2. 3 -Way Wall Switch: The 3-way wall
switch is a wall mount control box with an
up/stop/down button and plugs directly
into the screen’s RJ-45 input.
3. IR “Eye” Receiver: (sold separately) The IR “Eye”
Receiver plugs directly into the screen’s RJ-45 input to
present a low profile line-of-sight control option for your IR
remote control even in a recessed ceiling installation.
Installation Instructions
Please consult a professional installer. Elite Screens is not liable for any faulty installations.
1. Select the installation location for your screen. Ensure that it is within reasonable proximity from your power source.
2. For best support of your screen, it is ideal to secure your screen into the studs of your house’s internal framework. If studs are
not available, use hollow anchors for mounting your wall screws into drywall. If you’re installing in a concrete structure, use
concrete bolts to secure your screen.
Always consult a professional installer or hardware professional to ensure that the proper screws and/or hardware are being used.
3. Ensure that both brackets are in perfect level alignment with one another. Use wall/c iling wood screws to secure to the wood e
studs. Use hollow anchors if mounting in drywall.
4. The screen casing is designed to accept the wall screws directly. If not using the Optional L- Brackets
http://www.elitescreens.com/lbracket1, sure to position the washer between the head of the wall-screw and the anchor slots on be
the screen’s casing.
UP
St op
Do wn
3-way Wall Switch
Note: The IR Remote
MUST be within direct
line of sight to the
sensor to function.
See figure to the left.
Termékspecifikációk
| Márka: | Elite Screens |
| Kategória: | Vetítővászon |
| Modell: | Spectrum Electric 100 |
Szüksége van segítségre?
Ha segítségre van szüksége Elite Screens Spectrum Electric 100, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók Vetítővászon Elite Screens
20 Augusztus 2024
20 Augusztus 2024
20 Augusztus 2024
20 Augusztus 2024
20 Augusztus 2024
20 Augusztus 2024
20 Augusztus 2024
20 Augusztus 2024
20 Augusztus 2024
20 Augusztus 2024
Útmutatók Vetítővászon
- Vetítővászon Oregon Scientific
- Vetítővászon Instaal
- Vetítővászon Duronic
- Vetítővászon GPX
- Vetítővászon Optoma
- Vetítővászon Pyle
- Vetítővászon Projecta
- Vetítővászon Celexon
- Vetítővászon Draper
- Vetítővászon Vestel
- Vetítővászon Da-Lite
- Vetítővászon AV:link
- Vetítővászon Luxburg
- Vetítővászon Elite
- Vetítővászon EluneVision
- Vetítővászon Lumene
- Vetítővászon Stewart
- Vetítővászon Avers
- Vetítővászon KHOMO GEAR
- Vetítővászon EPV
Legújabb útmutatók Vetítővászon
11 Október 2024
6 Október 2024
2 Október 2024
29 Szeptember 2024
29 Szeptember 2024
27 Szeptember 2024
26 Szeptember 2024
22 Szeptember 2024
11 Szeptember 2024
6 Szeptember 2024