Használati útmutató Elite Screens Kestrel FE85C

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Elite Screens Kestrel FE85C (5 oldal) a Vetítővászon kategóriában. Ezt az útmutatót 4 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/5
3/6/2015 1
Kestrel Series
Electric
Floor
Rising
Projection
Screen
USER’S GUIDE
Kestrel Accessories
Kestrel Optional Accessories
Kest rel
Qty 1
5-12V Trigger
Qty 1
IR “eye” Receiver
Qty 1
Radio Frequency
Remote Control
Qty 1
Infrared
Remote Control
Qty 1
Low Voltage 3-way
Wall Switch
Qty 2
AAA batteries
QTY 1
Wireless 5-12V Trigger
Part# -ZSP-TR02
3/6/2015 2
IMPORTANT SAFETY NOTES
1. Please rea d t his m anua l be fore us e a nd f ollo w t he pro ced ure s spe cif ied :
a. Please retain this manual for future reference.
b. To av d any damages to the screen, do not use y access ies or parts not oi an or
recommended by Elite Screens.
c. H d e device care lly during transp tation. an le th fu or
d. Do not set up screen on uneven rfaces. su
e. T o prevent electrical sh k or oc fire never over ; load e power cord, and avoid th
contacting the motorized components with liquids or foreign objects.
2. The tubular motor equipped in the electric screen series Home 2, CineTension2, VMAX Plus3/4,
Kestrel and Raptor models feature an overheat protection sensor.
If the screen is consecutively brought up and down between 3-4 minutes, the motor will
automatically shut-off to prevent the motor from sustaining damage through overheating. If
the automatic shutoff is activated, please allow 30 minutes cool down before resuming
operation.
3. The Kestrel Series Screen is equipped with strong tension cross-spring system Please do not a .
attempt any unnecessary repairs It is at your own risk to open the inside cover or .
dismantle/work on the screen. Individual modification to thi product are prohibit and will s s ed
void the user’s warranty.
4. When using the screen, please
a. Avoid strong wind, rain, or electrical storms.
b. No direct sunshine (UV Radiation) o m sture. r oi
c. K p away f m ee ro fire sour and high temperature devices. ces
d. Turn off t he power before moving this product.
NOT E:
This equip nt has been tested a fou to comply with the limit s for a dig al device me nd nd Class B it
pursuant to Part 15 of the FCC Guidelines.
The products ar sig d t e de ne o e e provid reasonabl prot tion agains rmfu interferenc iec t ha l e n
a residential/commercial installat n and end user application an may radiate radio frequency io d
energy .
However, there is no g rantee that interference will not occur in a partic ar installation. If this ua ul
equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
1. The power outlet should b close to the un and e i acce ible. e it as ly ss
2. Re-orient or relocat the receiving antenna.e
3. Increase the separation between the equipment and the receiver.
4. Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
5. Consult t he ler or an perien d radio/TV t hnician f or additional help. dea ex ce ec
Keep hands clear from the closing panels
3/6/2015 3
SCREEN OPERATION
Setup:
Remove
the
controls and wiring
from
the
compartment
on
the
left
side of
the Kestrel
Floor
Electric
Screen
as
shown
in
the
pictures below.
Connect the screen
to
the
power
supply
and
sw itc h t he powe r bu tton on . Now it is ready for us e.
Power:
About the Control System:
1.
Wireless 5-
12V
Trigger:
The ZSP-TR02 Wireless 5-
12V
trigger
for
your
new
Elite
Kestrel
all sow
your
screen to synchronize sit
rise
and
d pro
with
the
projectors
power
c le by connecting the output trigger, yc
which is typically located on the back of most projectors, and the RF remote control via the ZSP-TR02
cable.
The
screen
rises
when
the
p ectorroj
powers
up and
retracts
when
the
projector
powers
down.
2.
RF
(Radio
Frequenc and Optional IR (Infrared) Remotes:y)
The Kestrel Series screen includes both
IR and RF receivers that enable the consumer to use either the RF or an optional IR r o control. The em te
RF remote is best used when the screen is concealed or long distance control is required. The RF
technology therefore more versatile as it require line of to operate the screen. The optional IR does not
requires a direct line of sight through the screen’s IR receiver window.
Controlling the Kestrel Series with the optional accessories: Wired 5-12V
trigger, Extended IR receiver or 3-way wall box switch- eye
1. Wired 5-12V Trigger: Connect t 5-12 volt trigger cable to your projector s trigger output via a separate he
cable that may or may not be provided by the projector manufacture. The trigger feature will not work without an
output cable from the projector, but it can be tested using a 9-volt battery by simply connecting the Red (+) and
Green (-) cable to the 9-volt battery
2. e Rece erI R Ey iv : The IR eye rec ei ver cable pr ovides a n ex tens ion of the IR sensor should
the I R rec eiver wi ndow on the Kestrels screen is c oncealed .
3. 3 - wall s w i t c h xw a y bo : The 3-way wall switch box allows manual control to operate the screen’s
UP/STOP/DOWN commands.
ON OFF
IR receiver window

Termékspecifikációk

Márka: Elite Screens
Kategória: Vetítővászon
Modell: Kestrel FE85C

Szüksége van segítségre?

Ha segítségre van szüksége Elite Screens Kestrel FE85C, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók Vetítővászon Elite Screens

Útmutatók Vetítővászon

Legújabb útmutatók Vetítővászon