Használati útmutató Elica Leone ELN136S2

Elica Páraelszívó Leone ELN136S2

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Elica Leone ELN136S2 (31 oldal) a Páraelszívó kategóriában. Ezt az útmutatót 2 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/31
Use, Care, and
Installation Guide
Guide
d’utilisation,
d’entretien et
d’installation
Guía de
instalación, uso y
mantenimiento
READ AND SAVE THESE
INSTRUCTIONS
LISEZ CES
INSTRUCTIONS ET
CONSERVEZ-LES
LEA Y CONSERVE
ESTAS INSTRUCCIONES
LIB0152213
Printed in Mexico
10/18
Models: KIT0154387
4
INSTALLATION REQUIREMENTS
Tools and Parts
Gather the required tools and parts before starting
installation. Read and follow the instructions provided with
any tools listed here.
Tools needed
• Drill
1¼” (3 cm) drill bit
³⁄₁₆” (0.5 cm) drill bit
Pencil
Wire stripper or utility knife
Tape measure or ruler
Pliers
Caulking gun and weatherproof caulking compound
Vent clamps
Jigsaw or keyhole saw
Flat-blade screwdriver
Metal snips
Phillips screwdriver
Parts needed
6 - 9 AWG wires, one each of the following colors: black,
white, red, blue, gray, and green or green/yellow (ground)
The length of the conduit and AWG wires is NOTE:
determined by the distance between the in-line blower
motor and range hood terminal boxes.
11 - UL listed wire connectors
Parts supplied
Remove parts from packages. Check that all parts are
included.
Strain relief connector 2
4.2x8 mm screws 6
6-wire blower connector 1
4x1.8 mm flat washers 4
Rectangular bracket - Motor cover
2
Bracket- Connector support
1
6.3x60 mm screws 4
9-wire blower connector 1
Strain Reliefs
Ø Ø 12 mm 15.9 mm
1
6x13.5 mm
2
Torx 20 adapter 1
Torx 10 adapter 1
Strap 2.5x95 mm
2
7
3 For or EVV648S1, EVV636S1 range hood models
you have to remove the spacer and the dip trays before
removing the internal motor blower.
A
BA. Drip trays screws
B. Drip trays
AB
A. Spacer screws
B. Spacer
4 Remove the range hood internal motor blower.
B
A
A. Blower
B. Blower screws
5 Install the rectangular brackets (included in kit) with
screws (4)4.2x8 mm.
6 Install the spacer, dip trays and grease filters.
B
A
A. Rectangular brackets
B. Screws
B. For dual Blower Motor Models (ECL136S4, ECL142S4,
ECL148S4, ELI142S2, ELI136S2, ETR134S1, EAR140S4,
EAR146S4, EAR134S4, ELN136S2, ELN142S2, ELN148S1)
1 Remove the filters, the mounting screws and lock washers.
A
B
A. Screw with locker
washer
B. Mounting Hole
2 For ELN136S2, ELN142S2, ELI136S2, ELI142S2,
EAR134S4 range hood models you have to remove
the blower mounting screws from the top of the hood
housing.
A. Blower screws
A

Termékspecifikációk

Márka: Elica
Kategória: Páraelszívó
Modell: Leone ELN136S2

Szüksége van segítségre?

Ha segítségre van szüksége Elica Leone ELN136S2, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók Páraelszívó Elica

Útmutatók Páraelszívó

Legújabb útmutatók Páraelszívó

Atag

Atag WM 5 Útmutató

30 Március 2025
Smeg

Smeg CA60EPX Útmutató

30 Március 2025
CATA

CATA C GLAS H BK Útmutató

30 Március 2025
Smeg

Smeg STH650X Útmutató

30 Március 2025
Etna

Etna 4191 inox Útmutató

29 Március 2025
Miele

Miele da 249 1 Útmutató

29 Március 2025
Miele

Miele DA 420 UL Útmutató

29 Március 2025
AEG

AEG DK9160-W Útmutató

29 Március 2025