Használati útmutató EdgeCraft E315
EdgeCraft
Messenslijper
E315
Olvassa el alább 📖 a magyar nyelvű használati útmutatót EdgeCraft E315 (44 oldal) a Messenslijper kategóriában. Ezt az útmutatót 3 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra
Oldal 1/44
R E A D T H E S E I N S T R U C T I O N S B E F O R E U S E .
I T I S E S S E N T I A L T H AT YO U F O L LOW T H E S E
I N S TR U C T I O N S TO AC H I E V E O P T I M U M R E S U LT S .
© 2021 The Legacy Companies
E L E C T R I C K N I F E S H A R P E N E R
E315 Electric
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should
always be followed including the following:
1. Read all instructions. Every user should read this manual.
2. To protect against electrical hazards, do not immerse the
EdgeCraft® Model E315 in water or other liquid.
3. Make sure that only clean knife blades are inserted in
EdgeCraft® Model E315.
4. Unplug from outlet when not in use, before putting on or taking
o parts and before cleaning.
5. Avoid contacting moving parts.
6. Do not operate any appliance with a damaged cord or plug or
after the appliance malfunctions, or is dropped or damaged in
any manner.
U.S. customers: You can return your sharpener to EdgeCraft’s
factory for service where the cost of repair or electrical or
mechanical adjustment can be estimated. When the electrical
cord on this appliance is damaged, it must be replaced by the
EdgeCraft® distributor or other qualified service to avoid the
danger of electrical shock.
Outside U.S.: Please return your sharpener to your local
distributor where the cost of repair or electrical or mechanical
adjustment can be estimated. If the supply cord is damaged, it
must be replaced by the manufacturer, its service agent or
similarly qualified persons in order to avoid a hazard.
7. CAUTION! This appliance may be fitted with a polarized plug
(one blade is wider than the other). To reduce the risk of electric
shock, this plug will fit in a polarized outlet only one way. If the
plug does not fit fully in the outlet, reverse the plug. If it still does
not fit, contact a qualified electrician. Do not modify the plug
in anyway.
English — 2
8. The use of attachments not recommended or sold by
EdgeCraft Corporation may cause fire, electric shock or injury.
9. The EdgeCraft® Model E315 is designed to sharpen knives. Do
not attempt to sharpen scissors, ax blades or any blade that
does not fit freely in the slots.
10. Do not let the cord hang over edge of table or counter or touch
hot surfaces.
11. When in the “ON” position (Red flash on switch is exposed when
“ON”), the EdgeCraft® sharpener should always be on a stable
countertop or table.
12. WARNING: KNIVES PROPERLY SHARPENED ON YOUR Trizor
XV® Model E315 WILL BE SHARPER THAN YOU EXPECT. TO
AVOID INJURY, USE AND HANDLE THEM WITH EXTREME
CARE. DO NOT CUT TOWARD ANY PART OF YOUR FINGERS,
HAND OR BODY. DO NOT RUN FINGER ALONG EDGE. STORE
IN A SAFE MANNER.
13. Do not use outdoors.
14. Do not use honing oils, water or any other lubricant with the
EdgeCraft® Model E315.
15. For household use only.
16. This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities,
or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the appliance
by a person responsible for their safety.
17. This appliance is intended to be used in household and similar
applications such as: - sta kitchen areas in shops, oces, and
other working environments; - farm houses; - by clients in hotels,
motels, and other residential type environments; - bed and
breakfast type environments.
SAVE THESE INSTRUCTIONS.
English — 3
Termékspecifikációk
| Márka: | EdgeCraft |
| Kategória: | Messenslijper |
| Modell: | E315 |
Szüksége van segítségre?
Ha segítségre van szüksége EdgeCraft E315, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók Messenslijper EdgeCraft
29 Augusztus 2024
29 Augusztus 2024
28 Augusztus 2024
28 Augusztus 2024
28 Augusztus 2024
28 Augusztus 2024
28 Augusztus 2024
28 Augusztus 2024
28 Augusztus 2024
28 Augusztus 2024
Útmutatók Messenslijper
- Messenslijper Ikea
- Messenslijper Adler
- Messenslijper Ozito
- Messenslijper Gourmetmaxx
- Messenslijper Brentwood
- Messenslijper Bifinett
- Messenslijper Clatronic
- Messenslijper Bomann
- Messenslijper Ambiano
- Messenslijper Güde
- Messenslijper Roadstar
- Messenslijper Guzzanti
- Messenslijper OBH Nordica
- Messenslijper Steba
- Messenslijper Gardenline
- Messenslijper Trebs
- Messenslijper IdeenWelt
- Messenslijper Graef
- Messenslijper Beper
- Messenslijper Orava
- Messenslijper Presto
- Messenslijper For_Q
- Messenslijper Wüsthof
- Messenslijper Berkel
- Messenslijper Chef's Choice
- Messenslijper Donau Elektronik
- Messenslijper Sharpal
Legújabb útmutatók Messenslijper
6 Október 2024
18 Szeptember 2024
5 Szeptember 2024
3 Szeptember 2024
3 Szeptember 2024
3 Szeptember 2024
2 Szeptember 2024
31 Augusztus 2024
31 Augusztus 2024
31 Augusztus 2024