Használati útmutató DeWalt DW866

DeWalt Fűrészgép DW866

Olvassa el alább 📖 a magyar nyelvű használati útmutatót DeWalt DW866 (27 oldal) a Fűrészgép kategóriában. Ezt az útmutatót 4 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/27
DEWALT Industrial Tool Co., 701 East Joppa Road, Baltimore, MD 21286 Printed in U.S.A. (JUN98-CD-1) Form No. 384621-01
DW866 Copyright © 1998
384621-01/DW866 1/8/02 2:27 PM Page 2
INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y PÓLIZA
DE GARANTÍA. LÉASE ESTE INSTRUCTIVO ANTESADVERTENCIA:
DE USAR EL PRODUCTO.
INSTRUCTION MANUAL
GUIDE D'UTILISATION
MANUAL DE INSTRUCCIONES
DW866
12” (105mm) Cut-off Machine
Machine à tronçonner de 105 mm (12 po)
Máquina cortadora de 105 mm (12”)Máquina cortadora de 105 mm (12”)
384621-01/DW866 1/8/02 2:27 PM Page 3
ELECTRICAL SAFETY
• Grounded tools must be plugged into an outlet properly
installed and grounded in accordance with all codes and
ordinances. Never remove the grounding prong or modify the
plug in any way. Do not use any adapter plugs. Check with a
qualified electrician if you are in doubt as to whether the outlet
is properly grounded. If the tools should electrically malfunction or
break down, grounding provides a low resistance path to carry
electricity away from the user.
•Double insulated tools are equipped with a polarized plug (one
blade is wider than the other.) This plug will fit in a polarized
outlet only one way. If the plug does not fit fully in the outlet,
reverse the plug. If it still does not fit, contact a qualified
electrician to install a polarized outlet. Do not change the plug
in any way. Double insulation eliminates the need for the three
wire grounded power cord and grounded power supply system.
•Avoid body contact with grounded surfaces such as pipes,
radiators, ranges and refrigerators. There is an increased risk of
electric shock if your body is grounded.
•Don’t expose power tools to rain or wet conditions. Water
entering a power tool will increase the risk of electric shock.
•Do not abuse the cord. Never use the cord to carry the tools or
pull the plug from an outlet. Keep cord away from heat, oil,
sharp edges or moving parts. Replace damaged cords
immediately. Damaged cords increase the risk of electric shock.
•When operating a power tool outside, use an outdoor
extension cord marked “W-A” or “W.” These cords are rated for
outdoor use and reduce the risk of electric shock. When using an
extension cord, be sure to use one heavy enough to carry the
current your product will draw. An undersized cord will cause a drop
in line voltage resulting in loss of power and overheating. The
following table shows the correct size to use depending on cord
length and nameplate ampere rating. If in doubt, use the next
heavier gage. The smaller the gage number, the heavier the cord.
English
IF YOU HAVE ANY QUESTIONS OR COMMENTS ABOUT THIS
OR ANY DEWALT TOOL, CALL US TOLL FREE AT:
1-800-4-DEWALT (1-800-433-9258)
General Safety Rules
WARNING! Read and understand all instructions. Failure to
follow all instructions listed below may result in electric shock, fire
and/or serious personal injury.
SAVE THESE INSTRUCTIONS
WARNING: Improper connection of the equipment grounding
conductor can result in the risk of electric shock. Check with a
qualified electrician or service person if you are in doubt as to
whether the outlet is properly grounded. Do not modify the plug
provided with the appliance. If it will not fit the outlet, a proper outlet
must be installed by a qualified electrician.
We recommend that you never disassemble the tool or try to do any
rewiring in the electrical system. Any repairs should be performed
only by authorized service centers. Should you be determined to
make a repair yourself, remember that the green colored wire is the
grounding wire. Never connect this green wire to a live terminal. If
you replace the plug on the power cord, be sure to connect the green
wire only to the grounding (longest) prong on a three-prong plug.
Never remove the grounding prong.
WORK AREA
•Keep your work area clean and well lit. Cluttered benches and
dark areas invite accidents.
•Do not operate power tools in explosive atmospheres, such as
in the presence of flammable liquids, gases, or dust. Power
tools create sparks which may ignite the dust or fumes.
•Keep bystanders, children, and visitors away while operating a
power tool. Distractions can cause you to lose control.
384621-01/DW866 1/8/02 2:27 PM Page 4

Termékspecifikációk

Márka: DeWalt
Kategória: Fűrészgép
Modell: DW866

Szüksége van segítségre?

Ha segítségre van szüksége DeWalt DW866, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók Fűrészgép DeWalt

DeWalt

DeWalt DCCS621 Útmutató

3 Január 2025
DeWalt

DeWalt DCPS671 Útmutató

3 Január 2025
DeWalt

DeWalt DCS590 Útmutató

3 Január 2025
DeWalt

DeWalt DWM120 Útmutató

2 Október 2024
DeWalt

DeWalt DW309K Útmutató

30 Szeptember 2024
DeWalt

DeWalt DW317 Útmutató

30 Szeptember 2024
DeWalt

DeWalt DW100 Útmutató

23 Szeptember 2024
DeWalt

DeWalt DW861 Útmutató

12 Szeptember 2024
DeWalt

DeWalt DCS312B Útmutató

10 Szeptember 2024
DeWalt

DeWalt DCS397 Útmutató

2 Szeptember 2024

Útmutatók Fűrészgép

Legújabb útmutatók Fűrészgép

Bavaria By Einhell

Bavaria By Einhell BHS 66 Útmutató

3 Április 2025
Bavaria By Einhell

Bavaria By Einhell BPS 600 E Útmutató

3 Április 2025
Makita

Makita DCS4610 Útmutató

2 Április 2025
Makita

Makita DPC6430 Útmutató

1 Április 2025
Makita

Makita DCS431 Útmutató

1 Április 2025
Makita

Makita DCS430 Útmutató

1 Április 2025
Makita

Makita EK6101 Útmutató

1 Április 2025
Makita

Makita DCS6401 Útmutató

1 Április 2025
Kraftronic

Kraftronic KT-ST 550 Útmutató

30 Március 2025
Kraftronic

Kraftronic KT-US 650 Útmutató

30 Március 2025