Használati útmutató DeWalt DW359

DeWalt Fűrészgép DW359

Olvassa el alább 📖 a magyar nyelvű használati útmutatót DeWalt DW359 (41 oldal) a Fűrészgép kategóriában. Ezt az útmutatót 2 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF

Oldal 1/41

INSTRUCTION MANUAL

GUIDE D'UTILISATION

MANUAL DE INSTRUCCIONES

DW357/DW358/DW359 7-1/4" Circular Saw

DW360/DW361/DW362/DW363 7-1/4" Circular Saw with Electric Brake

DW357/DW358/DW359 Scie circulaire de 180 mm (7 1/4 po)

DW360/DW361/DW362/DW363 Scie circulaire de 180 mm (7 1/4 po) avec frein électrique

DW357/DW358/DW359 Sierra circular de 180 mm (7-1/4")

DW360/DW361/DW362/DW363 Sierra circular de 180 mm (7-1/4") con freno eléctrico

INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y PÓLIZA

DE GARANTIA. LEASE ESTE INSTRUCTIVO ANTESADVERTENCIA:

DE USAR EL PRODUCTO. SI TIENE DUDAS, POR FAVOR LLAME.

382782-00/DW359 7/18/00 10:59 AM Page 3

English

Important Safety Instructions

WARNING: When using electric tools, basic safety precautions

should always be followed to reduce risk of fire, electric shock, and

personal injury, including the following:

READ ALL INSTRUCTIONS

Double Insulation

Double insulated tools are constructed throughout with two separate

layers of electrical insulation or one double thickness of insulation

between you and the tool’s electrical system. Tools built with this

insulation system are not intended to be grounded. As a result, your

tool is equipped with a two prong plug which permits you to use

extension cords without concern for maintaining a ground

connection.

NOTE: Double insulation does not take the place of normal safety

precautions when operating this tool. The insulation system is for

added protection against injury resulting from a possible electrical

insulation failure within the tool.

CAUTION: WHEN SERVICING USE ONLY IDENTICAL REPLACE-

MENT PARTS. Repair or replace damaged cords.

Polarized Plugs

Polarized plugs (one blade is wider than the other) are used on

equipment to reduce the risk of electric shock. When provided, this

plug will fit in the polarized outlet only one way. If the plug does not

fit fully in the outlet, reverse the plug. If it still does not fit, contact a

qualified electrician to install the proper outlet. Do not change the

plug in any way.

IF YOU HAVE ANY QUESTIONS OR COMMENTS ABOUT THIS

OR ANY DEWALT TOOL, CALL US TOLL FREE AT:

1-800-4-DEWALT (1-800-433-9258)

TRIGGER

SWITCH

RETRACTING

LEVER

LOWER GUARD

SHOE

QUADRANT LEVER

OR KNOB

BEVEL

QUADRANT

Specifications:

120V AC/DC

1700 W

13.0A (DW357, DW358, DW360, DW361)

13.5A (DW363)

15.0A (DW359, DW362)

DW359 SHOWN

382782-00/DW359 7/18/00 10:59 AM Page 4

Safety Instructions For All Tools

• KEEP WORK AREA CLEAN. Cluttered areas and benches invite

injuries.

•CONSIDER WORK AREA ENVIRONMENT. Don’t expose power

tools to rain. Don’t use power tools in damp or wet locations. Keep

work area well lit. Do not use tool in presence of flammable liquids

or gases.

•GUARD AGAINST ELECTRIC SHOCK. Prevent body contact with

grounded surfaces. For example; pipes, radiators, ranges, and

refrigerator enclosures.

•KEEP CHILDREN AWAY. Do not let visitors contact tool or

extension cord. All visitors should be kept away from work area.

•STORE IDLE TOOLS. When not in use, tools should be stored in

dry, and high or locked-up place — out of reach of children.

•DON’T FORCE TOOL.It will do the job better and safer at the rate

for which it was intended.

•USE RIGHT TOOL. Don’t force small tool or attachment to do the

job of a heavy-duty tool. Don’t use tool for purpose not intended- for

example- don’t use circular saw for cutting tree limbs or logs.

•DRESS PROPERLY. Do not wear loose clothing or jewelry. They

can be caught in moving parts. Rubber gloves and non-skid

footwear are recommended when working outdoors. Wear

protective hair covering to contain long hair.

•USE SAFETY GLASSES. Also use face or dust mask if cutting

operation is dusty.

•DON’T ABUSE CORD. Never carry tool by cord or yank it to

disconnect from receptacle. Keep cord from heat, oil, and sharp

edges.

•SECURE WORK. Use clamps or a vise to hold work. It’s safer than

using your hand and it frees both hands to operate tool.

•DON’T OVERREACH. Keep proper footing and balance at all times.

•MAINTAIN TOOLS WITH CARE. Keep tools sharp and clean for

better and safer performance. Follow instructions for lubricating and

English

changing accessories. Inspect tool cords periodically and if

damaged, have repaired by authorized service facility. Inspect

extension cords periodically and replace if damaged. Keep handles

dry, clean, and free from oil and grease.

• DISCONNECT OR LOCK OFF TOOLS when not in use, before

servicing, and when changing accessories, such as blades, bits,

cutters.

• REMOVE ADJUSTING KEYS AND WRENCHES. Form habit of

checking to see that keys and adjusting wrenches are removed

from tool before turning it on.

•AVOID UNINTENTIONAL STARTING. Don’t carry tool with finger

on switch. Be sure switch is off when plugging in.

•EXTENSION CORDS. Make sure your extension cord is in good

condition. When using an extension cord, be sure to use one heavy

enough to carry the current your product will draw. An undersized

cord will cause a drop in line voltage resulting in loss of power and

overheating. The following table shows the correct size to use

depending on cord length and nameplate ampere rating. If in doubt,

use the next heavier gage. The smaller the gage number, the

heavier the cord.

Minimum Gage for Cord Sets

Volts Total Length of Cord in Feet

120V 0-25 26-50 51-100 101-150

240V 0-50 51-100 101-200 201-300

Ampere Rating

More Not more AWG

Than Than

0 - 6 18 16 16 14

6 - 10 18 16 14 12

10 - 12 16 16 14 12

12 - 16 14 12 Not Recommended

•OUTDOOR USE EXTENSION CORDS. When tool is used

outdoors, use only extension cords intended for use outdoors and

so marked.

382782-00/DW359 7/18/00 10:59 AM Page 1

Termékspecifikációk

Márka:	DeWalt
Kategória:	Fűrészgép
Modell:	DW359

Szüksége van segítségre?

Ha segítségre van szüksége DeWalt DW359, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek

Az Ön neve*

Az Ön e-mail címe*

Írja ide kérdését

Útmutatók Fűrészgép DeWalt

DeWalt DCCS621 Útmutató

3 Január 2025

DeWalt DCPS671 Útmutató

3 Január 2025

DeWalt DCS590 Útmutató

3 Január 2025

DeWalt DWM120 Útmutató

2 Október 2024

DeWalt DW309K Útmutató

30 Szeptember 2024

DeWalt DW317 Útmutató

30 Szeptember 2024

DeWalt DW100 Útmutató

23 Szeptember 2024

DeWalt DW861 Útmutató

12 Szeptember 2024

DeWalt DCS312B Útmutató

10 Szeptember 2024

DeWalt DCS397 Útmutató

2 Szeptember 2024

Útmutatók Fűrészgép

Legújabb útmutatók Fűrészgép

Bavaria By Einhell BHS 66 Útmutató

3 Április 2025

Bavaria By Einhell BPS 600 E Útmutató

3 Április 2025

Makita DCS4610 Útmutató

2 Április 2025

Makita DPC6430 Útmutató

1 Április 2025

Makita DCS431 Útmutató

1 Április 2025

Makita DCS430 Útmutató

1 Április 2025

Makita EK6101 Útmutató

1 Április 2025

Makita DCS6401 Útmutató

1 Április 2025

Kraftronic KT-ST 550 Útmutató

30 Március 2025

Kraftronic KT-US 650 Útmutató

30 Március 2025