Használati útmutató Dell Latitude E6320 (117 oldal)

Dell Latitude E6320 Owner's Manual

Dell Latitude E6320 Owner's ManualDell Latitude E6320 Owner's Manual

Regulatory Model P12S

Regulatory Model P12SRegulatory Model P12S

Regulatory Type P12S001

Regulatory Type P12S001Regulatory Type P12S001

Notes, Cautions, and Warnings

Notes, Cautions, and WarningsNotes, Cautions, and Warnings

NOTE:

NOTE: NOTE: A NOTE indicates important information that helps you make better use of your

computer.

CAUTION: A CAUTION indicates potential damage to hardware or loss of data if

CAUTION: A CAUTION indicates potential damage to hardware or loss of data ifCAUTION: A CAUTION indicates potential damage to hardware or loss of data if

instructions are not followed.

instructions are not followed.instructions are not followed.

WARNING: A WARNING indicates a potential for property damage, personal injury, or

WARNING: A WARNING indicates a potential for property damage, personal injury, orWARNING: A WARNING indicates a potential for property damage, personal injury, or

death.

death.death.

Information in this publication is subject to change without notice.

Information in this publication is subject to change without notice.Information in this publication is subject to change without notice.

Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc. is

strictly forbidden.

Trademarks used in this text: Dell™, the DELL logo, Dell Precision

™, Precision ON™,ExpressCharge™,

Latitude™, Latitude ON™, OptiPlex™, Vostro™, and Wi-Fi Catcher™ are trademarks of Dell Inc. Intel

®,

Pentium®, Xeon®, Core™, Atom™, Centrino®, and Celeron® are registered trademarks or trademarks of Intel

Corporation in the U.S. and other countries. AMD

® is a registered trademark and AMD Opteron

™,

AMD Phenom™, AMD Sempron

™, AMD Athlon™, ATI Radeon™, and ATI FirePro™ are trademarks of

Advanced Micro Devices, Inc. Microsoft®, Windows®, MS-DOS

®, Windows Vista®, the Windows Vista start

button, and Office Outlook® are either trademarks or registered trademarks of Microsoft Corporation in the

United States and/or other countries. Blu-ray Disc™ is a trademark owned by the Blu-ray Disc Association

(BDA) and licensed for use on discs and players. The Bluetooth ®

word mark is a registered trademark and

owned by the Bluetooth® SIG, Inc. and any use of such mark by Dell Inc. is under license. Wi-Fi® is a

registered trademark of Wireless Ethernet Compatibility Alliance, Inc.

Other trademarks and trade names may be used in this publication to refer to either the entities claiming the

marks and names or their products, Dell Inc. disclaims any proprietary interest in trademarks and trade

names other than its own.

2011 – 07

Rev. A00

Contents

ContentsContents

Notes, Cautions, and Warnings

Notes, Cautions, and WarningsNotes, Cautions, and Warnings..................................................................2

..................................................................2

..................................................................2..................................................................2

1 Working on Your Computer

1 Working on Your Computer1 Working on Your Computer......................................................................9

......................................................................9

......................................................................9......................................................................9

Before Working Inside Your Computer.............................................................................9

Recommended Tools.......................................................................................................10

Turning Off Your Computer..............................................................................................11

After Working Inside Your Computer..............................................................................11

2 ExpressCard

2 ExpressCard2 ExpressCard 13

13

1313

..............................................................................................

............................................................................................................................................................................................

Removing The ExpressCard............................................................................................13

Installing the ExpressCard..............................................................................................13

3 Secure Digital (SD) Card

3 Secure Digital (SD) Card3 Secure Digital (SD) Card 15

15

1515

.........................................................................

..................................................................................................................................................

Removing The Secure Digital (SD) Card.........................................................................15

Installing the Secure Digital (SD) Card............................................................................15

4 Battery

4 Battery4 Battery 17

17

1717

........................................................................................................

................................................................................................................................................................................................................

Removing The Battery.....................................................................................................17

Installing The Battery......................................................................................................17

5 Subscriber Identity Module (SIM) Card

5 Subscriber Identity Module (SIM) Card5 Subscriber Identity Module (SIM) Card 19

19

1919

...............................................

..............................................................................................

Removing The Subscriber Identity Module (SIM) Card..................................................19

Installing the Subscriber Identity Module (SIM) Card....................................................20

6 Hard Drive

6 Hard Drive6 Hard Drive 21

21

2121

..................................................................................................

....................................................................................................................................................................................................

Removing The Hard Drive................................................................................................21

Installing The Hard Drive.................................................................................................22

7 Optical Drive

7 Optical Drive7 Optical Drive 23

23

2323

..............................................................................................

............................................................................................................................................................................................

Removing The Optical Drive............................................................................................23

Installing The Optical Drive.............................................................................................25

8 Base Cover

8 Base Cover8 Base Cover 27

27

2727

................................................................................................

................................................................................................................................................................................................

Removing The Base Cover..............................................................................................27

Installing The Base Cover...............................................................................................28

9 Memory Card

9 Memory Card9 Memory Card 29

29

2929

............................................................................................

........................................................................................................................................................................................

Removing The Memory...................................................................................................29

Installing The Memory.....................................................................................................30

10 Coin-Cell Battery

10 Coin-Cell Battery10 Coin-Cell Battery 31

31

3131

....................................................................................

........................................................................................................................................................................

Removing The Coin-Cell Battery.....................................................................................31

Installing The Coin-Cell Battery.......................................................................................32

11 Wireless Local Area Network (WLAN) Card

11 Wireless Local Area Network (WLAN) Card11 Wireless Local Area Network (WLAN) Card 33

33

3333

.....................................

..........................................................................

Removing The Wireless Local Area Network (WLAN) Card...........................................33

Installing The Wireless Local Area Network (WLAN) Card............................................34

12 Wireless Wide Area Network (WWAN) Card

12 Wireless Wide Area Network (WWAN) Card12 Wireless Wide Area Network (WWAN) Card 35

35

3535

...................................

......................................................................

Removing The Wireless Wide Area Network (WWAN) Card.........................................35

Installing The Wireless Wide Area Network (WWAN) Card..........................................36

13 Keyboard Trim

13 Keyboard Trim13 Keyboard Trim 37

37

3737

.........................................................................................

..................................................................................................................................................................................

Removing The Keyboard Trim.........................................................................................37

Installing The Keyboard Trim..........................................................................................38

14 Keyboard

14 Keyboard14 Keyboard 39

39

3939

..................................................................................................

....................................................................................................................................................................................................

Removing The Keyboard.................................................................................................39

Installing The Keyboard..................................................................................................41

15 Palm Rest

15 Palm Rest15 Palm Rest 43

43

4343

.................................................................................................

..................................................................................................................................................................................................

Removing The Palmrest Assembly..................................................................................43

Installing The Palmrest Assembly...................................................................................45

16 Bluetooth Card

16 Bluetooth Card16 Bluetooth Card 47

47

4747

........................................................................................

................................................................................................................................................................................

Removing The Bluetooth Card.........................................................................................47

Installing The Bluetooth Card..........................................................................................48

17 LED Board

17 LED Board17 LED Board 49

49

4949

................................................................................................

................................................................................................................................................................................................

Removing The LED Board................................................................................................49

Installing The LED Board.................................................................................................51

18 Smart Card Reader

18 Smart Card Reader18 Smart Card Reader 53

53

5353

.................................................................................

..................................................................................................................................................................

Removing The Smart Card Reader..................................................................................53

Installing The Smart Card Reader...................................................................................55

19 Media Board

19 Media Board19 Media Board 57

57

5757

...........................................................................................

......................................................................................................................................................................................

Removing The Media Board............................................................................................57

Installing The Media Board.............................................................................................59

20 Display Hinges

20 Display Hinges20 Display Hinges 61

61

6161

........................................................................................

................................................................................................................................................................................

Removing The Display Hinge Covers..............................................................................61

Installing The Display Hinge Covers................................................................................62

21 Display Assembly

21 Display Assembly21 Display Assembly 63

63

6363

...................................................................................

......................................................................................................................................................................

Removing The Display Assembly....................................................................................63

Installing The Display Assembly.....................................................................................67

22 System Board

22 System Board22 System Board 69

69

6969

..........................................................................................

....................................................................................................................................................................................

Removing The System Board..........................................................................................69

Installing The System Board...........................................................................................72

23 Heat Sink

23 Heat Sink23 Heat Sink 75

75

7575

..................................................................................................

....................................................................................................................................................................................................

Removing The Heat-Sink Assembly................................................................................75

Installing The Heat-Sink Assembly.................................................................................77

24 Input/Output Panel

24 Input/Output Panel24 Input/Output Panel 79

79

7979

.................................................................................

..................................................................................................................................................................

Removing The Input/Output Panel..................................................................................79

Installing The Input/Output Panel....................................................................................81

25 Speaker

25 Speaker25 Speaker 83

83

8383

....................................................................................................

........................................................................................................................................................................................................

Removing The Speakers..................................................................................................83

Installing The Speakers...................................................................................................85

26 DC-In Port

26 DC-In Port26 DC-In Port 87

87

8787

................................................................................................

................................................................................................................................................................................................

Removing The DC-In Port................................................................................................87

Installing The DC-In Port.................................................................................................89

27 Display Bezel

27 Display Bezel27 Display Bezel 91

91

9191

...........................................................................................

......................................................................................................................................................................................

Removing The Display Bezel...........................................................................................91

Installing The Display Bezel............................................................................................92

28 Display Panel

28 Display Panel28 Display Panel 93

93

9393

..........................................................................................

....................................................................................................................................................................................

Removing The Display Panel...........................................................................................93

Installing The Display Panel............................................................................................94

29 Camera

29 Camera29 Camera 95

95

9595

.....................................................................................................

..........................................................................................................................................................................................................

Removing The Camera....................................................................................................95

Installing The Camera.....................................................................................................96

30 Specifications

30 Specifications30 Specifications 97

97

9797

.........................................................................................

..................................................................................................................................................................................

Technical Specifications.................................................................................................97

31 System Setup

31 System Setup31 System Setup 103

103

103103

........................................................................................

................................................................................................................................................................................

Overview.......................................................................................................................103

Entering System Setup..................................................................................................103

System Setup Menu Options.........................................................................................103

32 Diagnostics

32 Diagnostics32 Diagnostics 115

115

115115

............................................................................................

........................................................................................................................................................................................

Device Status Lights......................................................................................................115

Battery Status Lights.....................................................................................................115

LED Error Codes............................................................................................................115

33 Contacting Dell

33 Contacting Dell33 Contacting Dell 117

117

117117

.....................................................................................

..........................................................................................................................................................................

Contacting Dell..............................................................................................................117

8

Working on Your Computer

Working on Your ComputerWorking on Your Computer 1

1

11

Before Working Inside Your Computer

Before Working Inside Your ComputerBefore Working Inside Your Computer

Use the following safety guidelines to help protect your computer from potential

damage and to help to ensure your personal safety. Unless otherwise noted,

each procedure included in this document assumes that the following

conditions exist:

• You have performed the steps in Working on Your Computer.

• You have read the safety information that shipped with your computer.

• A component can be replaced or--if purchased separately--installed by

performing the removal procedure in reverse order.

WARNING: Before working inside your computer, read the safety information that

WARNING: Before working inside your computer, read the safety information thatWARNING: Before working inside your computer, read the safety information that

shipped with your computer. For additional safety best practices information, see

shipped with your computer. For additional safety best practices information, seeshipped with your computer. For additional safety best practices information, see

the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.

the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.

CAUTION: Many repairs may only be done by a certified service technician. You

CAUTION: Many repairs may only be done by a certified service technician. YouCAUTION: Many repairs may only be done by a certified service technician. You

should only perform troubleshooting and simple repairs as authorized in your

should only perform troubleshooting and simple repairs as authorized in yourshould only perform troubleshooting and simple repairs as authorized in your

product documentation, or as directed by the online or telephone service and

product documentation, or as directed by the online or telephone service andproduct documentation, or as directed by the online or telephone service and

support team. Damage due to servicing that is not authorized by Dell is not covered

support team. Damage due to servicing that is not authorized by Dell is not coveredsupport team. Damage due to servicing that is not authorized by Dell is not covered

by your warranty. Read and follow the safety instructions that came with the

by your warranty. Read and follow the safety instructions that came with theby your warranty. Read and follow the safety instructions that came with the

product.

product.product.

CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist

CAUTION: To avoid electrostatic discharge, ground yourself by using a wristCAUTION: To avoid electrostatic discharge, ground yourself by using a wrist

grounding strap or by periodically touching an unpainted metal surface, such as a

grounding strap or by periodically touching an unpainted metal surface, such as agrounding strap or by periodically touching an unpainted metal surface, such as a

connector on the back of the computer.

connector on the back of the computer.connector on the back of the computer.

CAUTION: Handle components and cards with care. Do not touch the components

CAUTION: Handle components and cards with care. Do not touch the componentsCAUTION: Handle components and cards with care. Do not touch the components

or contacts on a card. Hold a card by its edges or by its metal mounting bracket.

or contacts on a card. Hold a card by its edges or by its metal mounting bracket.or contacts on a card. Hold a card by its edges or by its metal mounting bracket.

Hold a component such as a processor by its edges, not by its pins.

Hold a component such as a processor by its edges, not by its pins.Hold a component such as a processor by its edges, not by its pins.

CAUTION: When you disconnect a cable, pull on its connector or on its pull-tab, not

CAUTION: When you disconnect a cable, pull on its connector or on its pull-tab, notCAUTION: When you disconnect a cable, pull on its connector or on its pull-tab, not

on the cable itself. Some cables have connectors with locking tabs; if you are

on the cable itself. Some cables have connectors with locking tabs; if you areon the cable itself. Some cables have connectors with locking tabs; if you are

disconnecting this type of cable, press in on the locking tabs before you disconnect

disconnecting this type of cable, press in on the locking tabs before you disconnectdisconnecting this type of cable, press in on the locking tabs before you disconnect

the cable. As you pull connectors apart, keep them evenly aligned to avoid bending

the cable. As you pull connectors apart, keep them evenly aligned to avoid bendingthe cable. As you pull connectors apart, keep them evenly aligned to avoid bending

any connector pins. Also, before you connect a cable, ensure that both connectors

any connector pins. Also, before you connect a cable, ensure that both connectorsany connector pins. Also, before you connect a cable, ensure that both connectors

are correctly oriented and aligned.

are correctly oriented and aligned.are correctly oriented and aligned.

9

NOTE:

NOTE: NOTE: The color of your computer and certain components may appear differently

than shown in this document.

To avoid damaging your computer, perform the following steps before you begin

working inside the computer.

1.

1.1. Ensure that your work surface is flat and clean to prevent the computer

cover from being scratched.

2.

2.2. Turn off your computer (see

Turning Off Your Computer

).

3.

3.3. If the computer is connected to a docking device (docked) such as the

optional Media Base or Battery Slice, undock it.

CAUTION: To disconnect a network cable, first unplug the cable from your

CAUTION: To disconnect a network cable, first unplug the cable from yourCAUTION: To disconnect a network cable, first unplug the cable from your

computer and then unplug the cable from the network device.

computer and then unplug the cable from the network device.computer and then unplug the cable from the network device.

4.

4.4. Disconnect all network cables from the computer.

5.

5.5. Disconnect your computer and all attached devices from their electrical

outlets.

6.

6.6. Close the display and turn the computer upside-down on a flat work

surface.

NOTE:

NOTE: NOTE: To avoid damaging the system board, you must remove the main battery

before you service the computer.

7.

7.7. Remove the main battery.

8.

8.8. Turn the computer top-side up.

9.

9.9. Open the display.

10.

10.10. Press the power button to ground the system board.

CAUTION: To guard against electrical shock, always unplug your computer from the

CAUTION: To guard against electrical shock, always unplug your computer from theCAUTION: To guard against electrical shock, always unplug your computer from the

electrical outlet before opening the display.

electrical outlet before opening the display.electrical outlet before opening the display.

CAUTION: Before touching anything inside your computer, ground yourself by

CAUTION: Before touching anything inside your computer, ground yourself byCAUTION: Before touching anything inside your computer, ground yourself by

touching an unpainted metal surface, such as the metal at the back of the

touching an unpainted metal surface, such as the metal at the back of thetouching an unpainted metal surface, such as the metal at the back of the

computer. While you work, periodically touch an unpainted metal surface to

computer. While you work, periodically touch an unpainted metal surface tocomputer. While you work, periodically touch an unpainted metal surface to

dissipate static electricity, which could harm internal components.

dissipate static electricity, which could harm internal components.dissipate static electricity, which could harm internal components.

11.

11.11. Remove any installed ExpressCards or Smart Cards from the appropriate

slots.

Recommended Tools

Recommended ToolsRecommended Tools

The procedures in this document may require the following tools:

• Small flat-blade screwdriver

10

• #0 Phillips screwdriver

• #1 Phillips screwdriver

• Small plastic scribe

• Flash BIOS update program CD

Turning Off Your Computer

Turning Off Your ComputerTurning Off Your Computer

CAUTION: To avoid losing data, save and close all open files and exit all open

CAUTION: To avoid losing data, save and close all open files and exit all openCAUTION: To avoid losing data, save and close all open files and exit all open

programs before you turn off your computer.

programs before you turn off your computer.programs before you turn off your computer.

1.

1.1. Shut down the operating system:

• In Windows Vista :

Click Start

Start

StartStart , then click the arrow in the lower-right corner of the

Start

StartStart Shut Down

Shut Down

Shut DownShut Down menu as shown below, and then click .

• In Windows XP:

Click . The computer turns off

Start

StartStart → Turn Off Computer

Turn Off Computer

Turn Off ComputerTurn Off Computer → Turn Off

Turn Off

Turn OffTurn Off

after the operating system shutdown process is complete.

2.

2.2. Ensure that the computer and all attached devices are turned off. If your

computer and attached devices did not automatically turn off when you

shut down your operating system, press and hold the power button for

about 4 seconds to turn them off.

After Working Inside Your Computer

After Working Inside Your ComputerAfter Working Inside Your Computer

After you complete any replacement procedure, ensure you connect any

external devices, cards, and cables before turning on your computer.

CAUTION: To avoid damage to the computer, use only the battery designed for this

CAUTION: To avoid damage to the computer, use only the battery designed for thisCAUTION: To avoid damage to the computer, use only the battery designed for this

particular Dell computer. Do not use batteries designed for other Dell computers.

particular Dell computer. Do not use batteries designed for other Dell computers.particular Dell computer. Do not use batteries designed for other Dell computers.

1.

1.1. Connect any external devices, such as a port replicator, battery slice, or

media base, and replace any cards, such as an ExpressCard.

2.

2.2. Connect any telephone or network cables to your computer.

11

CAUTION: To connect a network cable, first plug the cable into the network device

CAUTION: To connect a network cable, first plug the cable into the network deviceCAUTION: To connect a network cable, first plug the cable into the network device

and then plug it into the computer.

and then plug it into the computer.and then plug it into the computer.

3.

3.3. Replace the battery.

4.

4.4. Connect your computer and all attached devices to their electrical outlets.

5.

5.5. Turn on your computer.

12

ExpressCard

ExpressCardExpressCard 2

2

22

Removing The ExpressCard

Removing The ExpressCardRemoving The ExpressCard

1.

1.1. Follow the procedures in

Before Working On Your Computer

.

2.

2.2. Press in on the ExpressCard to release it from the computer.

3.

3.3. Slide the ExpressCard out of the computer.

Installing the ExpressCard

Installing the ExpressCardInstalling the ExpressCard

1.

1.1. Slide the ExpressCard into its slot until it clicks into place.

2.

2.2. Follow the procedures in

After working inside your computer

.

13

14

Secure Digital (SD) Card

Secure Digital (SD) CardSecure Digital (SD) Card 3

3

33

Removing The Secure Digital (SD) Card

Removing The Secure Digital (SD) CardRemoving The Secure Digital (SD) Card

1.

1.1. Follow the procedures in

Before Working On Your Computer

.

2.

2.2. Press in on the SD card to release it from the computer.

3.

3.3. Slide the SD card out of the computer.

Installing the Secure Digital (SD) Card

Installing the Secure Digital (SD) CardInstalling the Secure Digital (SD) Card

1.

1.1. Slide the Secure Digital (SD) card into its slot until it clicks into place.

2.

2.2. Follow the procedures in

After working inside your computer

.

15

16

Battery

BatteryBattery 4

4

44

Removing The Battery

Removing The BatteryRemoving The Battery

1.

1.1. Follow the procedures in

Before Working On Your Computer

.

2.

2.2. Slide the battery latches to unlock the battery.

3.

3.3. Slide the battery out and remove it from the computer.

Installing The Battery

Installing The BatteryInstalling The Battery

1.

1.1. Slide the battery into its slot until it clicks into place.

2.

2.2. Follow the procedures in

After working inside your computer

.

17

18

Subscriber Identity Module (SIM)

Subscriber Identity Module (SIM)Subscriber Identity Module (SIM)

Card

CardCard 5

5

55

Removing The Subscriber Identity Module (SIM) Card

Removing The Subscriber Identity Module (SIM) CardRemoving The Subscriber Identity Module (SIM) Card

1.

1.1. Follow the procedures in

Before Working On Your Computer

.

2.

2.2. Remove the

battery

.

3.

3.3. Press in on the SIM card to release it from the computer.

4.

4.4. Slide the SIM card out from the computer.

19

Installing the Subscriber Identity Module (SIM) Card

Installing the Subscriber Identity Module (SIM) CardInstalling the Subscriber Identity Module (SIM) Card

1.

1.1. Slide the SIM card into its compartment.

2.

2.2. Install the

battery

.

3.

3.3. Follow the procedures in

After Working Inside Your Computer

.

20

Hard Drive

Hard DriveHard Drive 6

6

66

Removing The Hard Drive

Removing The Hard DriveRemoving The Hard Drive

1.

1.1. Follow the procedures in

Before Working On Your Computer

.

2.

2.2. Remove the

battery

.

3.

3.3. Remove the screws that secure the hard drive to the computer.

4.

4.4. Slide and remove the hard drive out of the computer.

5.

5.5. Remove the screw that secures the hard-drive caddy to the hard drive.

21

6.

6.6. Pull and remove the hard-drive caddy away from the hard drive.

Installing The Hard Drive

Installing The Hard DriveInstalling The Hard Drive

1.

1.1. Attach the hard-drive caddy to the hard drive.

2.

2.2. Tighten the screws to secure the hard-drive caddy to the hard drive.

3.

3.3. Slide the hard drive into the computer.

4.

4.4. Replace and tighten the screws that secure the hard drive to the computer.

5.

5.5. Install the

battery

.

6.

6.6. Follow the procedures in

After working inside your computer

.

22

Optical Drive

Optical DriveOptical Drive 7

7

77

Removing The Optical Drive

Removing The Optical DriveRemoving The Optical Drive

1.

1.1. Follow the procedures in

Before Working On Your Computer

.

2.

2.2. Press and release the optical drive latch.

3.

3.3. Pull the optical drive out of the computer.

4.

4.4. Pull the optical drive door from one side to release it.

5.

5.5. Pull the other side of the optical drive door to release it completely from the

optical drive.

23

6.

6.6. Remove the screw that secures the drive latch to the optical drive.

7.

7.7. Remove the drive latch from the optical drive.

8.

8.8. Remove the screws that secures the drive latch bracket to the optical drive.

24

9.

9.9. Remove the drive latch bracket from the optical drive.

Installing The Optical Drive

Installing The Optical DriveInstalling The Optical Drive

1.

1.1. Insert the drive latch bracket into the optical drive.

2.

2.2. Tighten the screws to secure the drive latch bracket to the optical drive.

3.

3.3. Insert the drive latch into the optical drive.

4.

4.4. Tighten the screw to secure the drive latch to the optical drive.

5.

5.5. Push the optical drive door to insert it completely into the optical drive.

6.

6.6. Push the optical drive door from the other side till it clicks into place.

7.

7.7. Insert the optical drive using the drive latch.

8.

8.8. Push the drive latch in to secure it into its slot.

9.

9.9. Follow the procedures in

After working inside your computer

.

25

26

Base Cover

Base CoverBase Cover 8

8

88

Removing The Base Cover

Removing The Base CoverRemoving The Base Cover

1.

1.1. Follow the procedures in

Before Working On Your Computer

.

2.

2.2. Remove the

battery

.

3.

3.3. Remove the

Secure Digital (SD) Card

.

4.

4.4. Remove the screws that secure the base cover to the computer.

5.

5.5. Lift the base cover up and away from the computer.

27

Installing The Base Cover

Installing The Base CoverInstalling The Base Cover

1.

1.1. Place the base cover to align the screw holes correctly with the computer.

2.

2.2. Replace and tighten the screws to secure the base cover to the computer.

3.

3.3. Install the

Secure Digital (SD) Card

.

4.

4.4. Follow the procedures in

After Working Inside Your Computer

.

28

Memory Card

Memory CardMemory Card 9

9

99

Removing The Memory

Removing The MemoryRemoving The Memory

1.

1.1. Follow the procedures in

Before Working On Your Computer

2.

2.2. Remove the

battery

.

3.

3.3. Remove the

Secure Digital (SD) card

.

4.

4.4. Remove the

base cover

.

5.

5.5. Pry the retention clips away from the memory module until it pops up.

6.

6.6. Remove the memory module from the computer.

29

Installing The Memory

Installing The MemoryInstalling The Memory

1.

1.1. Insert the memory module into the memory slot.

2.

2.2. Press the clips to secure the memory module to the system board.

3.

3.3. Install the

base cover

.

4.

4.4. Install the

Secure Digital (SD) card

.

5.

5.5. Install the

battery

6.

6.6. Follow the procedures in

After Working Inside Your Computer

.

30

Coin-Cell Battery

Coin-Cell BatteryCoin-Cell Battery 10

10

1010

Removing The Coin-Cell Battery

Removing The Coin-Cell BatteryRemoving The Coin-Cell Battery

1.

1.1. Follow the procedures in

Before Working on Your Computer

.

2.

2.2. Remove the

battery

.

3.

3.3. Remove the

Secure Digital (SD) card

.

4.

4.4. Remove the

base cover

.

5.

5.5. Disconnect the coin-cell battery cable from the system board.

6.

6.6. Release and remove the coin-cell battery from the computer.

31

Installing The Coin-Cell Battery

Installing The Coin-Cell BatteryInstalling The Coin-Cell Battery

1.

1.1. Place the coin-cell battery in its location.

2.

2.2. Connect the coin-cell battery cable to the system board.

3.

3.3. Install the

base cover

.

4.

4.4. Install the

Secure Digital (SD) card

.

5.

5.5. Install the

battery

6.

6.6. Follow the procedures in

After working inside your computer

.

32

Wireless Local Area Network

Wireless Local Area NetworkWireless Local Area Network

(WLAN) Card

(WLAN) Card(WLAN) Card 11

11

1111

Removing The Wireless Local Area Network (WLAN) Card

Removing The Wireless Local Area Network (WLAN) CardRemoving The Wireless Local Area Network (WLAN) Card

1.

1.1. Follow the procedures in

Before Working On Your Computer

.

2.

2.2. Remove the

battery

.

3.

3.3. Remove the

Secure Digital (SD) card

.

4.

4.4. Remove the

base cover

.

5.

5.5. Disconnect the antenna cables from the WLAN card.

6.

6.6. Remove the screw that secures the WLAN card to the computer.

7.

7.7. Remove the WLAN card from its slot on the system board.

33

Installing The Wireless Local Area Network (WLAN) Card

Installing The Wireless Local Area Network (WLAN) CardInstalling The Wireless Local Area Network (WLAN) Card

1.

1.1. Insert the WLAN card into its connector at a 45–degree angle.

2.

2.2. Replace and tighten the screw that secures the WLAN card to the

computer.

3.

3.3. Connect the antenna cables according to the color code on the WLAN

card.

4.

4.4. Install the

base cover

.

5.

5.5. Install the

Secure Digital (SD) card

.

6.

6.6. Install the

battery

7.

7.7. Follow the procedures in

After Working Inside Your Computer

.

34

Wireless Wide Area Network

Wireless Wide Area NetworkWireless Wide Area Network

(WWAN) Card

(WWAN) Card(WWAN) Card 12

12

1212

Removing The Wireless Wide Area Network (WWAN) Card

Removing The Wireless Wide Area Network (WWAN) CardRemoving The Wireless Wide Area Network (WWAN) Card

1.

1.1. Follow the procedures in

Before Working On Your Computer

.

2.

2.2. Remove the

battery

.

3.

3.3. Remove the

Secure Digital (SD) card

.

4.

4.4. Remove the

base cover

.

5.

5.5. Disconnect the antenna cables from the WWAN card.

6.

6.6. Remove the screw that secures the WWAN card to the computer.

7.

7.7. Remove the WWAN card from the computer.

35

Installing The Wireless Wide Area Network (WWAN) Card

Installing The Wireless Wide Area Network (WWAN) CardInstalling The Wireless Wide Area Network (WWAN) Card

1.

1.1. Insert the WWAN card into its connector at a 45–degree angle.

2.

2.2. Replace and tighten the screw to secure the WWAN card to the computer.

3.

3.3. Connect the antenna cables according to the color code on the WLAN

card.

4.

4.4. Install the

base cover

.

5.

5.5. Install the

Secure Digital (SD) card

.

6.

6.6. Install the

battery

7.

7.7. Follow the procedures in

After Working Inside Your Computer

.

36

Keyboard Trim

Keyboard TrimKeyboard Trim 13

13

1313

Removing The Keyboard Trim

Removing The Keyboard TrimRemoving The Keyboard Trim

1.

1.1. Follow the procedures in

Before Working On Your Computer

.

2.

2.2. Using a plastic scribe, pry under the keyboard trim to release it from the

computer.

3.

3.3. Lift the keyboard trim to release the tabs and remove it from the computer.

37

Installing The Keyboard Trim

Installing The Keyboard TrimInstalling The Keyboard Trim

1.

1.1. Align the keyboard trim with the keyboard and snap it into place.

2.

2.2. Follow the procedures in

After Working Inside Your Computer

.

38

Keyboard

KeyboardKeyboard 14

14

1414

Removing The Keyboard

Removing The KeyboardRemoving The Keyboard

1.

1.1. Follow the procedures in

Before Working On Your Computer

.

2.

2.2. Remove the

battery

.

3.

3.3. Remove the

keyboard trim

.

4.

4.4. Remove the screws that secure the keyboard to the computer.

5.

5.5. Remove the screws that secure the keyboard to the palmrest assembly.

6.

6.6. Flip the keyboard over and lay it toward the display.

39

7.

7.7. Lift the clip to release the keyboard cable and disconnect it from the

computer.

8.

8.8. Remove the keyboard from the computer.

40

9.

9.9. Remove the tape securing the keyboard cable from the keyboard.

10.

10.10. Disconnect and remove the keyboard cable from the keyboard.

Installing The Keyboard

Installing The KeyboardInstalling The Keyboard

1.

1.1. Connect the keyboard cable and secure it to the keyboard using the tape.

2.

2.2. Connect the keyboard cable to its connector on the system board.

3.

3.3. Turn the keyboard over and lay it on the palmrest.

4.

4.4. Replace and tighten the screws to secure the keyboard to the palmrest

assembly.

5.

5.5. Replace and tighten the screws to secure the keyboard to the computer.

6.

6.6. Install the

battery

.

7.

7.7. Install the

keyboard trim

8.

8.8. Follow the procedures in

After Working Inside Your Computer

.

41

42

Palm Rest

Palm RestPalm Rest 15

15

1515

Removing The Palmrest Assembly

Removing The Palmrest AssemblyRemoving The Palmrest Assembly

1.

1.1. Follow the procedures in

Before Working On Your Computer

.

2.

2.2. Remove the

battery

.

3.

3.3. Remove the

Secure Digital (SD) card

.

4.

4.4. Remove the

optical drive

.

5.

5.5. Remove the

base cover

.

6.

6.6. Remove the

ExpressCard

.

7.

7.7. Remove the

hard drive

.

8.

8.8. Remove the

keyboard trim

.

9.

9.9. Remove the

keyboard

.

10.

10.10. Remove the screws that secure the palmrest assembly to the computer.

11.

11.11. Flip the computer and disconnect the following cables from the system

board:

• LED board

• touchpad

• bluetooth

• contactless smart card reader

• ExpressCard

• fingerprint reader

43

12.

12.12. Remove the screws to release the palmrest assembly from the system

board.

13.

13.13. Lift the palmrest assembly along the edges to unlock the tabs and remove it

away from the computer.

44

Installing The Palmrest Assembly

Installing The Palmrest AssemblyInstalling The Palmrest Assembly

1.

1.1. Align the palmrest assembly with the computer and snap it into place.

2.

2.2. Replace and tighten the screws to secure the palmrest assembly to the

system board.

3.

3.3. Connect the following cables to the system board:

• LED board

• touchpad

• bluetooth

• contactless smart card reader

• Express Card

• fingerprint reader

4.

4.4. Replace and tighten the screws to secure the palmrest assembly to the

computer.

5.

5.5. Install the

keyboard

.

6.

6.6. Install the

keyboard trim

.

7.

7.7. Install the

hard drive

.

8.

8.8. Install the

ExpressCard

.

9.

9.9. Install the

base cover

.

10.

10.10. Install the

optical drive

.

11.

11.11. Install the

Secure Digital (SD) card

.

12.

12.12. Install the

battery

.

13.

13.13. Follow the procedures in

After Working Inside Your Computer

.

45

46

Bluetooth Card

Bluetooth CardBluetooth Card 16

16

1616

Removing The Bluetooth Card

Removing The Bluetooth CardRemoving The Bluetooth Card

1.

1.1. Follow the procedures in

Before Working On Your Computer

.

2.

2.2. Remove the

battery

.

3.

3.3. Remove the

Secure Digital (SD) card

.

4.

4.4. Remove the

optical drive

.

5.

5.5. Remove the

base cover

.

6.

6.6. Remove the

ExpressCard

.

7.

7.7. Remove the

hard drive

.

8.

8.8. Remove the

keyboard trim

.

9.

9.9. Remove the

keyboard

.

10.

10.10. Remove the

palmrest assembly

.

11.

11.11. Remove the screws that secure the bluetooth card to the palmrest

assembly.

12.

12.12. Remove the bluetooth card from the palmrest assembly.

47

13.

13.13. Release and remove the bluetooth cable from the bluetooth card.

Installing The Bluetooth Card

Installing The Bluetooth CardInstalling The Bluetooth Card

1.

1.1. Connect the bluetooth cable to the bluetooth card.

2.

2.2. Place the bluetooth card on the palmrest assembly.

3.

3.3. Replace and tighten the screw to secure the bluetooth card to the palmrest

assembly.

4.

4.4. Install the

palmrest assembly

.

5.

5.5. Install the

keyboard

.

6.

6.6. Install the

keyboard trim

.

7.

7.7. Install the

hard drive

.

8.

8.8. Install the

ExpressCard

.

9.

9.9. Install the

base cover

.

10.

10.10. Install the

optical drive

.

11.

11.11. Install the

Secure Digital (SD) card

.

12.

12.12. Install the

battery

.

13.

13.13. Follow the procedures in

After Working Inside Your Computer

.

48

LED Board

LED BoardLED Board 17

17

1717

Removing The LED Board

Removing The LED BoardRemoving The LED Board

1.

1.1. Follow the procedures in

Before Working On Your Computer

.

2.

2.2. Remove the

battery

.

3.

3.3. Remove the

Secure Digital (SD) card

.

4.

4.4. Remove the

optical drive

.

5.

5.5. Remove the

base cover

.

6.

6.6. Remove the

ExpressCard

.

7.

7.7. Remove the

hard drive

.

8.

8.8. Remove the

keyboard trim

.

9.

9.9. Remove the

keyboard

.

10.

10.10. Remove the

palmrest assembly

.

11.

11.11. Release the LED board cable from the routing channel.

12.

12.12. Remove the screw that secures the LED board to the palm rest assembly.

49

13.

13.13. Remove the LED board from the palm rest assembly.

50

Installing The LED Board

Installing The LED BoardInstalling The LED Board

1.

1.1. Align the LED board on the palmrest.

2.

2.2. Replace and tighten the screw that secure the LED board to the palmrest.

3.

3.3. Route the LED board cable to its original position.

4.

4.4. Install the

palmrest assembly

.

5.

5.5. Install the

keyboard

.

6.

6.6. Install the

keyboard trim

.

7.

7.7. Install the

hard drive

.

8.

8.8. Install the

ExpressCard

.

9.

9.9. Install the

base cover

.

10.

10.10. Install the

optical drive

.

11.

11.11. Install the

Secure Digital (SD) card

.

12.

12.12. Install the

battery

.

13.

13.13. Follow the procedures in

After Working Inside Your Computer

.

51

52

Smart Card Reader

Smart Card ReaderSmart Card Reader 18

18

1818

Removing The Smart Card Reader

Removing The Smart Card ReaderRemoving The Smart Card Reader

1.

1.1. Follow the procedures in

Before Working On Your Computer

.

2.

2.2. Remove the

battery

.

3.

3.3. Remove the

Secure Digital (SD) card

.

4.

4.4. Remove the

optical drive

.

5.

5.5. Remove the

base cover

.

6.

6.6. Remove the

ExpressCard

.

7.

7.7. Remove the

hard drive

.

8.

8.8. Remove the

keyboard trim

.

9.

9.9. Remove the

keyboard

.

10.

10.10. Remove the

palmrest assembly

11.

11.11. Disconnect the smart card reader cable from the system board.

12.

12.12. Remove the screws that secure the smart card reader to the computer.

53

13.

13.13. Lift and remove the smart card reader from the computer.

54

Installing The Smart Card Reader

Installing The Smart Card ReaderInstalling The Smart Card Reader

1.

1.1. Place the smart card reader to its original position on the computer.

2.

2.2. Replace and tighten the screws to secure the smart card reader to the

computer.

3.

3.3. Connect the smart card reader cable to the system board.

4.

4.4. Replace and tighten the screws to secure the palmrest assembly to the

computer.

5.

5.5. Install the

palmrest assembly

.

6.

6.6. Install the

keyboard

.

7.

7.7. Install the

keyboard trim

.

8.

8.8. Install the

hard drive

.

9.

9.9. Install the

ExpressCard

.

10.

10.10. Install the

base cover

.

11.

11.11. Install the

optical drive

.

12.

12.12. Install the

Secure Digital (SD) card

.

13.

13.13. Install the

battery

.

14.

14.14. Follow the procedures in

After Working Inside Your Computer

.

55

56

Media Board

Media BoardMedia Board 19

19

1919

Removing The Media Board

Removing The Media BoardRemoving The Media Board

1.

1.1. Follow the procedures in

Before Working On Your Computer

.

2.

2.2. Remove the

battery

.

3.

3.3. Remove the

Secure Digital (SD) card

.

4.

4.4. Remove the

optical drive

.

5.

5.5. Remove the

base cover

.

6.

6.6. Remove the

ExpressCard

.

7.

7.7. Remove the

hard drive

.

8.

8.8. Remove the

keyboard trim

.

9.

9.9. Remove the

keyboard

.

10.

10.10. Remove the

palmrest assembly

.

11.

11.11. Disconnect the media board cable from the system board.

12.

12.12. Remove the screws that secures the media board to the computer.

57

13.

13.13. Remove the media board from the computer.

58

Márka:	Dell
Kategória:	laptop
Modell:	Latitude E6320

Használati útmutató Dell Latitude E6320

Termékspecifikációk

Szüksége van segítségre?

Útmutatók laptop Dell

Útmutatók laptop

Legújabb útmutatók laptop