Használati útmutató Deaf Bonce Apocalypse AAK-5500.1D
Deaf Bonce
Receiver
Apocalypse AAK-5500.1D
Olvassa el alább 📖 a magyar nyelvű használati útmutatót Deaf Bonce Apocalypse AAK-5500.1D (28 oldal) a Receiver kategóriában. Ezt az útmutatót 2 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra
Oldal 1/28
OWNER’S MANUAL РУКОВОДСТВО ПОЛЬЗОВАТЕЛЯ CAR AMPLIFIERS
MONOBLOCK CLASS D
http://deafbonce.com
AAK- 000.1D AAK-4000.1D AAK-5500.1D AAK-7500.1D AAK-12000.1D2
2
C O N T E N T S EN
1. Introduction
2. Safety instructions
3. Typical installation sequence
4. Connection methods
5. Wiring diagrams
6. Selection of the diameter of power cables and speaker cables
7. Specifications
8. Possible faults and their solutions
9. Box contents
10. Warranty and maintenance info
11. Information on disposal of the electrical and electronic equipment (for the European countries with
separate waste collection)
Thank you for purchasing this product!Deaf Bonce Deaf Bonce is committed to the creation of extremely high-profile
systems with no loss of quality.
To ensure proper use, please read through this manual before using this product. It is especially important that you carefully
read and observe caution’s in this manual. Please keep the manual in a safe and accessible place for future reference.
1. Make sure that your vehicle has a 12V DC electrical system with negative grounding. Before installing the amplifier in cars,
trucks or buses, check the battery voltage.
2 . Check the state of on-board power supply of your vehicle, the battery and the alternator. When the engine is running,
depending on the ambient temperature, the voltage to be outputted by the alternator must be within the range of 14 to 14.7 V.
Open circuit voltage (OCV) of the battery must be within the range of 12.5 to 13 V. Make sure that the rated current of the
alternator and the battery capacity is enough to provide increased consumption.
For example, for the power of the amplifier 1000 W, the rated current of the alternator is required at the rate of 1000 W / 13 V
= 77 amperes. A more powerful amplifier requires a more powerful alternator as well as an additional battery.
3 . Do not place the amplifier in the engine compartment and also in the places exposed to water, moisture, dust or dirt.
4 . Never stretch the cables outside of the car and near the moving parts of the car. This can lead to destruction of the
insulating layer, short circuit and fire.
5. The amplifier should be installed in areas of the car where the temperature varies from 0 °C (32 °F) to 55 °C (131 °F). The
amplifier should be in a place with a good air circulation. The horizontal position of the amplifier is the best way to install.
6 . During the operation the amplifier may be heated up to 80 °C (176 °F). Before you touch it, make sure it is not overheated
that may be dangerous.
7 . To improve the cooling of the amplifier, it is recommended to clean periodically the heatsink from dust. When cleaning the
heatsink strong solvents should not be used as they may damage the amplifier. Do not use compressed air, because solids can
penetrate inside the amplifier. Cleanings best done with wet towels or cloth.
8 . Make sure that the location of the amplifier does not violate the proper operation of mechanical and electrical devices of
the vehicle.
9. Make sure that during the installation and connection of the battery, the power cables are not shorted.
1 0. When performing plumbing, drilling or cutting works with the car, make sure that there is no wiring, brake lines, fuel pipe
or other structural elements under the place of work. Follow the safety rules! Use protective glasses and gloves.
11. To protect the wires use rubber gaskets if the wire passes through a hole in the plate, or other similar materials if it lies
close to the parts exposed to heat.
1 2. Make sure that all the cables are fixed over the entire length. Also make sure that their outer protective shell is non-
combustible. Use a clamping screw to secure the positive and negative cables next to the appropriate terminals of the amplifier.
1 3. Select a diameter of the power cable in accordance with the power of the amplifier and the recommendations provided
here. Power cables are extremely important since they directly affect the system damping factor and sound quality. The cables to
the battery must be in the copper crimp terminals pressed with the help of a hydraulic press, and well fixed to the battery
terminals.
1 4. To avoid accidental damage, keep the amplifier in its original packaging prior to installation.
15. Use high-quality copper speaker and power cables.
CAUTION!!! High sound pressure can damage your health!
Please use the common sense when controlling volume!
1 . I N T R O D U C T I O N
2 . S A F E T Y I N S T R U C T I O N S
1. Before installing the amplifier disconnect the battery from the electrical system.
2 . To connect the amplifier it is necessary to stretch the power cable from the location of the battery to the place of installation
of the amplifier. Select the power cable with the appropriate regulations in AWG (see Table: Selection of the diameter of the
power cables)
3. Connect the power supply with the correct polarity. Connect all (+) terminals of the amplifier to the cable from the positive
terminal of the battery and the (-) terminals of the amplifier – to the cables running from the negative terminal of the battery.
4 . Place the fuse holder for each positive cable within 40 cm from the positive terminal of the battery and connect one end of
the power cable to the holder after connecting the other end to the amplifier. Do not install the fuse.
5. Route all signal cables next to each other and separately from the power cables.
6. Connect the wires of RCA input. The input signal power must be between 0.2 V and 6 V.
7 To connect the power wire supply is necessary to use special. power cables.
8. Fasten the amplifier properly when installing it in the vehicle. If the component is disconnected during driving, it may cause
serious damage to the passengers of the car or another vehicle. It is not recommended to screw the amplifier directly to the metal
it can lead to distorsions at the signal outputs.
9. After installation is complete, check the wiring of the system and make sure that all connections have been made correctly.
Before installing the fuses, disconnect the positive lead from the battery and then install the fuse in the fuse holder. Using the light
bulb 12 V 21 W, connect the positive lead to one contact of the bulb and the other contact of the bulb to the positive terminal of
the battery.
When properly connected, the bulb must briefly light up and go out. Now you may connect the positive lead to the (+)
battery. If the light does not go out, then something is wrong. This will prevent damage to the amplifier in case of reverse polarity
and unwanted sparks when connecting. Install the rest of the fuses.
10 . To activate the amplifier, it is necessary to apply the positive potential of 12 volts to the control input of the amplifier (REM
IN) through a switch or a corresponding control output (REMOTE OUT) with the head unit (HU).
11 . LED indicator on the front panel lights up in green, indicating that the device is turned on. LED indicator lights up in red
when the outputs are overloaded, if the temperature protection is activated, if there is a short circuit in the system cables to the
heatsink and if the amplifier is faulty.
1 2. The sound level is calibrated by adjusting the volume of the source up to 3/4 of its maximum level. Then, adjust the
sensitivity level of the amplifier up until you hear distortions.
3 . T Y P I C A L I N S TA L L AT I O N S E Q U E N C E
3
EN
Termékspecifikációk
Márka: | Deaf Bonce |
Kategória: | Receiver |
Modell: | Apocalypse AAK-5500.1D |
Szüksége van segítségre?
Ha segítségre van szüksége Deaf Bonce Apocalypse AAK-5500.1D, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók Receiver Deaf Bonce
31 Augusztus 2024
31 Augusztus 2024
31 Augusztus 2024
31 Augusztus 2024
31 Augusztus 2024
31 Augusztus 2024
31 Augusztus 2024
31 Augusztus 2024
31 Augusztus 2024
31 Augusztus 2024
Útmutatók Receiver
- Receiver Phoenix Gold
- Receiver Sony
- Receiver August
- Receiver Yamaha
- Receiver Nedis
- Receiver Marantz
- Receiver Philips
- Receiver Pioneer
- Receiver Garmin
- Receiver RCF
- Receiver Bosch
- Receiver JVC
- Receiver Harman Kardon
- Receiver Nokia
- Receiver Emos
- Receiver Hifonics
- Receiver Onkyo
- Receiver Geemarc
- Receiver LogiLink
- Receiver Technics
- Receiver Roland
- Receiver JBL
- Receiver DAP-Audio
- Receiver GoGen
- Receiver AVM
- Receiver Boss
- Receiver Crestron
- Receiver Strong
- Receiver Cyrus
- Receiver VOX
- Receiver Tripp Lite
- Receiver MEE Audio
- Receiver Klipsch
- Receiver Hegel
- Receiver Reely
- Receiver Aiwa
- Receiver Speco Technologies
- Receiver Kenwood
- Receiver Rega
- Receiver Jabra
- Receiver Hama
- Receiver ELAC
- Receiver Renkforce
- Receiver Sencor
- Receiver Focusrite
- Receiver Bose
- Receiver Raymarine
- Receiver Blackstar
- Receiver Sennheiser
- Receiver Cambridge
- Receiver Kanto
- Receiver Alpine
- Receiver Optoma
- Receiver Omnitronic
- Receiver Logitech
- Receiver Amiko
- Receiver SPL
- Receiver Pro-Ject
- Receiver TOA
- Receiver SVS
- Receiver Hilti
- Receiver Crunch
- Receiver Smart-AVI
- Receiver Naim
- Receiver Bush
- Receiver Power Dynamics
- Receiver Dynacord
- Receiver Trevi
- Receiver Memphis Audio
- Receiver The T.amp
- Receiver Ground Zero
- Receiver Denon
- Receiver ATen
- Receiver Electro-Voice
- Receiver JL Audio
- Receiver Hartke
- Receiver Auna
- Receiver Mac Audio
- Receiver Behringer
- Receiver Mooer
- Receiver REL Acoustics
- Receiver Chamberlain
- Receiver Chord
- Receiver Lotronic
- Receiver Bogen
- Receiver Shure
- Receiver Renegade
- Receiver PreSonus
- Receiver Peavey
- Receiver Kogan
- Receiver Alecto
- Receiver Velleman
- Receiver Universal Audio
- Receiver AEA
- Receiver Russound
- Receiver Teac
- Receiver Clarion
- Receiver Blustream
- Receiver Metra
- Receiver Monacor
- Receiver MXL
- Receiver S.M.S.L
- Receiver Anthem
- Receiver McIntosh
- Receiver LD Systems
- Receiver Proel
- Receiver Blaupunkt
- Receiver NAD
- Receiver Conrad
- Receiver Datapath
- Receiver IRiver
- Receiver Samson
- Receiver Cayin
- Receiver Vonyx
- Receiver Alto
- Receiver Delta Dore
- Receiver Infinity
- Receiver Magnat
- Receiver Bang & Olufsen
- Receiver Trust
- Receiver AKAI
- Receiver Konig
- Receiver Marmitek
- Receiver TechniSat
- Receiver Fenton
- Receiver Line 6
- Receiver Jensen
- Receiver Pyle
- Receiver MuxLab
- Receiver Audioengine
- Receiver AVMATRIX
- Receiver Kemo
- Receiver Rolls
- Receiver Salora
- Receiver IFM
- Receiver Musical Fidelity
- Receiver DataVideo
- Receiver A-NeuVideo
- Receiver Stinger
- Receiver Lindy
- Receiver Audizio
- Receiver Audiotec Fischer
- Receiver Rotel
- Receiver Hertz
- Receiver Bowers & Wilkins
- Receiver FBT
- Receiver Audiolab
- Receiver Atlas Sound
- Receiver AKG
- Receiver Marshall Electronics
- Receiver Ashly
- Receiver AudioControl
- Receiver Monitor Audio
- Receiver Audac
- Receiver Technical Pro
- Receiver Siig
- Receiver Yorkville
- Receiver Rockford Fosgate
- Receiver Krüger&Matz
- Receiver Salus
- Receiver Dual
- Receiver ICOM
- Receiver Gefen
- Receiver Inateck
- Receiver Kathrein
- Receiver Yaesu
- Receiver Vocopro
- Receiver Optex
- Receiver Medeli
- Receiver Palmer
- Receiver Imperial
- Receiver Kicker
- Receiver DBX
- Receiver Sangean
- Receiver Camille Bauer
- Receiver Valueline
- Receiver Focal
- Receiver MB Quart
- Receiver Legamaster
- Receiver Lectrosonics
- Receiver IFi Audio
- Receiver Audix
- Receiver Vivolink
- Receiver Arcam
- Receiver FiiO
- Receiver Intelix
- Receiver Comprehensive
- Receiver Orava
- Receiver Alfatron
- Receiver Match
- Receiver Thorens
- Receiver Majestic
- Receiver Smartwares
- Receiver Teufel
- Receiver Classé
- Receiver Vincent
- Receiver NuPrime
- Receiver Reloop
- Receiver CSL
- Receiver Artsound
- Receiver KanexPro
- Receiver Kramer
- Receiver Ram Audio
- Receiver ART
- Receiver BZBGear
- Receiver Ampeg
- Receiver American Audio
- Receiver Audison
- Receiver Palsonic
- Receiver Caliber
- Receiver Exibel
- Receiver Vision
- Receiver Summit Audio
- Receiver Musway
- Receiver Sunstech
- Receiver Elektrobock
- Receiver Avalon
- Receiver Sonance
- Receiver Oculus VR
- Receiver Redline
- Receiver Marquant
- Receiver Matrox
- Receiver Steren
- Receiver Polk
- Receiver Sandberg
- Receiver Galaxy Audio
- Receiver Denson
- Receiver Roksan
- Receiver Valcom
- Receiver Goobay
- Receiver Naxa
- Receiver Sherwood
- Receiver QTX
- Receiver Zgemma
- Receiver RDL
- Receiver Zehnder
- Receiver Mx Onda
- Receiver Fredenstein
- Receiver QSC
- Receiver Lanzar
- Receiver Humax
- Receiver Vaddio
- Receiver Jung
- Receiver Golden Age Project
- Receiver Apart
- Receiver Audio Pro
- Receiver Radial Engineering
- Receiver Homecast
- Receiver Graupner
- Receiver Bluesound
- Receiver Integra
- Receiver Revox
- Receiver Comica
- Receiver Fusion
- Receiver Skytec
- Receiver Linn
- Receiver Monoprice
- Receiver Ibiza Sound
- Receiver Axton
- Receiver Edision
- Receiver HiFi ROSE
- Receiver OSD Audio
- Receiver Mark Levinson
- Receiver Soundstream
- Receiver Xoro
- Receiver DLS
- Receiver Adastra
- Receiver Block
- Receiver Aeon Labs
- Receiver Citronic
- Receiver Formuler
- Receiver LTC
- Receiver Dreambox
- Receiver Zalman
- Receiver HUMANTECHNIK
- Receiver Crest Audio
- Receiver Primare
- Receiver Xantech
- Receiver Ferguson
- Receiver Wet Sounds
- Receiver Televés
- Receiver Extron
- Receiver Xtrend
- Receiver Scansonic
- Receiver Helix
- Receiver Winegard
- Receiver Laney
- Receiver Devialet
- Receiver Xsarius
- Receiver EA
- Receiver DirecTV
- Receiver Octagon
- Receiver GOgroove
- Receiver Crown
- Receiver SRS
- Receiver Avantree
- Receiver Antelope Audio
- Receiver Jolida
- Receiver Inovonics
- Receiver Ecler
- Receiver Ashdown Engineering
- Receiver Triax
- Receiver Mtx Audio
- Receiver Parasound
- Receiver Velodyne
- Receiver Epcom
- Receiver Sunfire
- Receiver Selfsat
- Receiver Skytronic
- Receiver CYP
- Receiver Karma
- Receiver TV One
- Receiver Powersoft
- Receiver Esoteric
- Receiver IMG Stage Line
- Receiver Wireless Solution
- Receiver Aurel
- Receiver ESX
- Receiver NUVO
- Receiver Pyramid
- Receiver LEA
- Receiver Sound Ordnance
- Receiver Canyon
- Receiver FiveO
- Receiver Planet Audio
- Receiver Koda
- Receiver Bang Olufsen
- Receiver JTS
- Receiver Niles
- Receiver Knoll
- Receiver Creek
- Receiver Mobile Crossing
- Receiver DAP
- Receiver GigaBlue
- Receiver CAD Audio
- Receiver Triangle
- Receiver Lab Gruppen
- Receiver Wavtech
- Receiver CyberData Systems
- Receiver WyreStorm
- Receiver Williams Sound
- Receiver Lyngdorf
- Receiver WesAudio
- Receiver AudioSource
- Receiver Stewart
- Receiver Leema
- Receiver Apantac
- Receiver Axing
- Receiver Seco-Larm
- Receiver Mosconi
- Receiver Crest
- Receiver TechLogix Networx
- Receiver Meridian
- Receiver Quad
- Receiver BC Acoustique
- Receiver Gold Note
- Receiver IOTAVX
- Receiver Fosi Audio
- Receiver Shinybow
- Receiver Rexing
- Receiver Shanling
- Receiver Inter-M
- Receiver Sinus Live
- Receiver Soundtrack
- Receiver Canor
- Receiver C2G
- Receiver Unison Research
- Receiver Cerwin-Vega
- Receiver Universal Remote Control
- Receiver BMB
- Receiver Advance
- Receiver Cloud
- Receiver PTN-electronics
- Receiver VMV
- Receiver Black Hydra
- Receiver Bellari
- Receiver GlobalSat
- Receiver Aplic
- Receiver PureLink
- Receiver FoneStar
- Receiver Glemm
Legújabb útmutatók Receiver
16 Október 2024
16 Október 2024
16 Október 2024
15 Október 2024
15 Október 2024
14 Október 2024
14 Október 2024
14 Október 2024
14 Október 2024
14 Október 2024