Használati útmutató Dahle 20834EC

Dahle Papír aprító 20834EC

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Dahle 20834EC (4 oldal) a Papír aprító kategóriában. Ezt az útmutatót 2 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/4
20800 SERIES
DEPARTMENTAL SHREDDERS
20801 S
20801 C
20800 EC
20814
20822 EC
20830 EC
20831 EC
20835 EC
OPERATION MANUAL
20800.90.0830 - 01/04 –
Dahle North America, Inc.
375 Jaffrey Road
Peterborough, NH 03458
Tel: (603) 924-0003 • Fax: (603) 924-1616
Email: shredders@dahle.com
w w w . d a h l e . c o m
Congratulations on your purchase of a DAHLE Paper Shredder! We here at
DAHLE North America are dedicated to providing rugged and dependable
products for the large, and not so large office. We are sure your new DAHLE
Paper Shredder will meet or exceed your expectations of quality and service.
If you have any questions regarding your new DAHLE paper shredder, call your
sales representative, or call DAHLE N.A. Customer Service, toll free, at (800) 995-
1379 between 8:30 am and 5:00 pm Monday through Friday, EST.
Check off the model and record the serial number for your records in the space
provided below.
❏ ❏ ❏ ❏ 20801 S 20801 C 20800 EC 20814 ❏ 20822 EC
❏❏❏ 20830 EC 20831 EC 20835 EC
Serial Number: __________________________
DIAGRAM KEY
1. Main Plug
2. Feed Opening
3. Light Barrier
4. Bag Full Indicator
5. Door Ajar Indicator
6. Paper Jam Indicator
7. Forward Switch (electronic models)
7a. Reverse Switch (electronic models)
8. Power Switch (electronic models)
8a. On/Off/Reverse (manual models)
9. Shred Bag
10. Waste Bin
11. Door Handle
12. Door
BEFORE YOU CALL FOR SERVICE
SYMPTOM POSSIBLE CAUSES SOLUTION
No Power 1. ON/OFF Switch set to
wrong postion
Move Switch to “I” (on)
position
2. Unit unplugged Connect to outlet
3. Outlet dead Reset circuit breaker
4. Door not fully closed Close Door
5. Waste Bin full Empty Waste Bin
Low capacity 1. Cutting blades dry Lubricate cutting blades
according to instructions.
DAHLE SHREDDER SUPPLIES AND ACCESSORIES
Shred Bags (100 per box)
Item No. Models
701 Personal & 20300 Series
704 20400, 20500 & 20600 Series
705 20800 Series
706 High Capacity Models
Waste Bin
805 20800 Series
Shredder Oil (All Models)
740 Box of 4 16oz. Bottles
740G Box of 4 1gal Bottles
740G/1 1 gallon bottle
Automatic Oiling System
SAO-120 4 Liter Auto Oiler
READ ALL INSTRUCTIONS BEFORE OPERATING YOUR SHREDDER IF ANY OTHER PROBLEMS OCCUR. CALL YOUR AUTHORIZED DAHLE SERVICE DEALER
CHANGING THE SHRED BAG
When the Shred Bag (10) is full, the shredder will automatically shut down. On the
electronic models an LED indicator will light and an audible alarm will sound.
Changing the Shred Bag is quick and easy if you follow these simple directions.
1. Turn shredder off.
2. Open Door (12) using Door Handle (11) to expose Waste Bin (10) and Shred
Bag (9).
3. Pull the Waste Bin and full Shred Bag out of the shredder.
4. Dispose of full Shred Bag.
5. Install new Shred Bag in Waste Bin, draping end of Shred Bag over edge of
Waste Bin.
6. Push Waste Bin, with new Shred Bag installed, back into shredder.
7. Close Door (12).
8. Turn on shredder and continue shredding.
CARING FOR YOUR SHREDDER
Clean covers with a clean dry cloth. Do not use water or solvents. Make sure you
disconnect your shredder from its power source before cleaning.
Paper shredders, like all mechanical equipment, need proper maintenance to
ensure efficient operation. Periodic lubrication of the cutting blades is important to
offset the friction generated within the cutting head. Frequency of lubrication will
vary depending on the shred size and the amount of usage. A strip-cut shredder
receiving light use (1 – 2 hours per week) will require lubrication only once or
twice a month, while the same machine used 1 – 2 hours per day will require
lubrication weekly. A cross-cut shredder should be lubricated every ½ hour of
shredding time to maintain maximum capacity and efficiency.
The procedure for lubricating your shredder is simple, and can be performed by
any operator. The oil is packaged in a squeeze bottle and is applied directly to the
cutting blades through the feed opening (3). Run a fine stream of lubricant from
one side of the feed opening to the other. Run the shredder in REVERSE for a
few seconds to help distribute the lubricant evenly. You can now continue
shredding as usual.
DAHLE Shredder Oil is the only lubricant you should use in your paper shredder.
It has been specially formulated so as not to leave any residue that could attract
dust and clog the shredding mechanism. You can order DAHLE Shredder Oil
(item # 740) from your local dealer.
Repairs on your paper shredder should only be performed by qualified
technicians. If you need service, contact your local dealer, or you can contact
DAHLE North America Customer Service between 8:30 am and 5:00 pm EST at
(800) 995-1379.
SAFETY INSTRUCTIONS
• Read the operating instructions carefully before operating your shredder!
• Do not use in the vicinity of flammable liquids or gases.
• Do not use in the vicinity of corrosive materials.
• Do not expose to water or wet conditions.
• Do not let children operate this, or any other, office equipment.
• Do not reach into the cutting mechanism during operation - not even from
the top or with objects.
• Do not operate the shredder for a period of more than 5 minutes in no-load
operation (operation without paper).
• Keep hair clear of machine.
• Keep neckties clear of machine.
• Keep bracelets, or any other jewelry, clear of machine.
• Power connection must be accessible at all times.
• Disconnect from power supply before servicing.
• The safety devices must not be disabled or removed.
• Please make sure that the shredder gets sufficient ventilation (ventilating
grills must kept free).
BEFORE YOU SHRED
• Remove Transport Bolts with wrench provided.
• Record the Model and Serial Number in the space provided inside the front
cover.
• Be sure the electrical outlet provides the proper power for your shredder
(see rating label on rear of shredder).
• Install Shred Bag (see: “CHANGING THE SHRED BAG”).
TURNING ON YOUR SHREDDER
20801 S •••• 20801 C
1. ON, OFF and REVERSE are controlled by the black
Rocker Switch (8a) on the top of the shredder.
2. Moving the switch to the “I” (ON) position
activates the shredding mechanism.
3. Moving the switch to the center or “O” (OFF)
position turns the shredder off.
4. The REVERSE position “R” will be discussed
in “CLEARING A PAPER JAM”.
NOTE: SHREDDER WILL NOT OPERATE UNLESS DOOR IS COMPLETELY CLOSED ALWAYS TURN SHREDDER OFF IF IT WILL BE UNATTENDED FOR LONG PERIODS OF TIME

Termékspecifikációk

Márka: Dahle
Kategória: Papír aprító
Modell: 20834EC

Szüksége van segítségre?

Ha segítségre van szüksége Dahle 20834EC, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók Papír aprító Dahle

Dahle

Dahle 808 MS Útmutató

7 December 2024
Dahle

Dahle PS 420 Útmutató

7 December 2024
Dahle

Dahle PaperSAFE PS 140 Útmutató

29 Augusztus 2024
Dahle

Dahle ShredMATIC SM 90 Útmutató

29 Augusztus 2024
Dahle

Dahle PaperSAFE PS 100 Útmutató

29 Augusztus 2024
Dahle

Dahle ShredMATIC SM 150 Útmutató

29 Augusztus 2024
Dahle

Dahle PaperSAFE PS 240 Útmutató

29 Augusztus 2024
Dahle

Dahle ShredMATIC SM 300 Útmutató

29 Augusztus 2024
Dahle

Dahle PaperSAFE PS 380 Útmutató

29 Augusztus 2024
Dahle

Dahle PowerTEC 818 HD Útmutató

29 Augusztus 2024

Útmutatók Papír aprító

Legújabb útmutatók Papír aprító

Bonsaii

Bonsaii C261-D Útmutató

7 December 2024
Fellowes

Fellowes Powershred 79Ci Útmutató

15 Október 2024
Fellowes

Fellowes Powershred C-525 Útmutató

8 Október 2024
Fellowes

Fellowes Powershred 225i Útmutató

5 Október 2024
Nedis

Nedis PASH110BKA4 Útmutató

2 Október 2024
Fellowes

Fellowes MicroShred MS-450Cs Útmutató

29 Szeptember 2024
Fellowes

Fellowes P-35C Powershred Útmutató

24 Szeptember 2024
Fellowes

Fellowes Powershred 1200C Útmutató

22 Szeptember 2024
Genie

Genie 255CD Útmutató

17 Szeptember 2024
Fellowes

Fellowes DS-12CS Útmutató

17 Szeptember 2024