Használati útmutató Cuisinart Pro Custom 11 DLC-8S

Cuisinart Konyhai robotgép Pro Custom 11 DLC-8S

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Cuisinart Pro Custom 11 DLC-8S (73 oldal) a Konyhai robotgép kategóriában. Ezt az útmutatót 10 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/73
Pro Custom 11
™ Food Processor
INSTRUCTION AND
RECIPE BOOKLET
For your safety and continued enjoyment of this product, always read
the instruction book carefully before using.
DLC-8S Series
2
IMPORTANT
UNPACKING
INSTRUCTIONS
This package contains a Cuisinart
® Food Pro-
cessor, and these standard parts for it: metal
chopping blade,  at baking cover, 2 slicing discs,
shredding disc, detachable stem for discs and
spatula, and instruction/recipe book.
CAUTION: THE CUTTING TOOLS HAVE VERY
SHARP EDGES.
To avoid injury when unpacking the parts, please
follow these instructions:
1. Place the box on a low table or on the  oor
next to the kitchen counter or table where you
plan to keep the food processor. Be sure the
box is right-side up.
2. Remove the cardboard panel and the instruc-
tion material.
3. Remove the round cardboard insert and the
thin slicing disc which is in a plastic bag inside
a cardboard insert. THE BLADES ARE SHARP.
4. You will see a rectangular upper plastic foam
block that holds the processor parts, each
tted into a cavity in the foam. The detachable
stem (A) and cup (B) for the  at baking cover
are in cavities at one short side of the foam
block. Remove them  rst.
The slicing disc (C) is on the long side and
shredding disc (D) on the other. Slide them
out of their grooves WITH GREAT CARE; THE
BLADES ARE SHARP. The work bowl cover (E)
with pusher assembly (F)  tted on it is in the
middle of foam block. Grasp an edge of the
work bowl cover and lift them straight up. (The
sleeve on the pusher may slide down as you
lift them out.) Now only the metal chopping
blade (G) remains in the foam block. CARE-
FULLY REMOVE THE METAL BLADE BY
GRASPING THE CENTER WHITE HUB AND
LIFT IT STRAIGHT UP. NEVER TOUCH THE
BLADES, WHICH ARE RAZOR SHARP.
5. Lift out the upper plastic foam block.
6. You will see a rectangular middle plastic foam
block that holds  at baking cover (H) and work
bowl (I). Lift them straight up, one by one, from
the foam block.
7. Lift out the middle plastic foam block.
8. The machine base is at the bottom of the box.
Remove the base by grasping the base hous-
ing with both hands and lifting it straight up.
9. Place the processor on a counter or table and
read the instructions thoroughly before using
the machine.
10. Save the shipping cartons and plastic foam
blocks. You may want to use them in shipping
the processor at a later date.
We recommend that you visit our website,
www.cuisinart.com, for a fast, ef cient way to
complete your online registration.
3
IMPORTANT
SAFEGUARDS
Always follow these safety precautions when
using this appliance.
Getting Ready
1. Read all instructions.
2. Blades are sharp. Handle them carefully.
3. Unplug from outlet when not in use, before
putting on or taking off parts and before
cleaning. To unplug, grasp plug and pull from
electrical outlet. Never pull cord.
4. Do not use outdoors.
5. Do not let cord hang over edge of table or
counter, or touch hot surfaces.
6. Do not operate any appliance with a dam-
aged cord or plug, or after appliance has
been dropped or damaged in any way.
Return appliance to the nearest authorized
service facility for examination, repair or elec-
trical or mechanical adjustment.
Operation
1. Do not use pusher assembly if sleeve
becomes detached from pusher.
2. Keep hands as well as spatulas and other
utensils away from moving blades or discs
while processing food, to prevent possibility
of severe personal injury or damage to food
processor. A plastic scraper may be used,
but must be used only when food processor
motor is stopped.
3. Avoid contact with moving parts. Never push
food down by hand when slicing or shred-
ding. Always use pusher.
4. Make sure motor has completely stopped
before removing cover. (If machine does
not stop within 4 seconds when you turn
cover, call 1-800-726-0190 for assistance.
Do not use machine.)
5. Never store any blade or disc on motor shaft.
To reduce the risk of injury, no blade or disc
should be placed on the shaft except when
the bowl is properly locked in place and the
processor is in use. Store blades and discs,
as you would sharp knives, out of reach of
children.
6. Be sure cover is securely locked in place
before operating food processor.
7. Do not try to override cover interlock
mechanism.
Cleaning
To protect against risk of electrical shock, do
not put base in water or other liquids.
General
1. Close supervision is necessary when any
appliance is used by or near children or
individuals with certain disabilities.
2. Do not operate this, or any other motor-
driven appliance, while under the influence of
alcohol or other substances that affect your
reaction time or perception.
3. The food processor is UL listed for house-
hold use. Use it only for food preparation as
described in the accompanying recipe and
instruction book.
4. The use of attachments not recommended
or sold by Cuisinart may cause fire, electrical
shock, personal injury or damage to your
food processor.
5. To avoid possible malfunction of work bowl
switch, never store processor with pusher
assembly in locked position.
6. Maximum rating of 5.2 amperes is based
on attachment that draws greatest current.
Other recommended attachments may draw
significantly less current.
7. Do not operate your appliance in an appli-
ance garage or under a wall cabinet. When
storing in an appliance garage, always
unplug the unit from the electrical outlet.
Not doing so could create a risk of fire, espe-
cially if the appliance touches the walls of
the garage or the door touches the unit as it
closes.
SAVE THESE
INSTRUCTIONS
FOR
HOUSEHOLD
USE ONLY

Termékspecifikációk

Márka: Cuisinart
Kategória: Konyhai robotgép
Modell: Pro Custom 11 DLC-8S

Szüksége van segítségre?

Ha segítségre van szüksége Cuisinart Pro Custom 11 DLC-8S, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók Konyhai robotgép Cuisinart

Cuisinart

Cuisinart FP-14DC Útmutató

12 Január 2025
Cuisinart

Cuisinart Mini-Prep Plus DLC-2AFR Útmutató

12 Január 2025
Cuisinart

Cuisinart Core Custom MFP-WB4 Útmutató

8 Január 2025
Cuisinart

Cuisinart CCH-3 Útmutató

2 Szeptember 2024
Cuisinart

Cuisinart Core Custom MFD-4 Útmutató

30 Augusztus 2024
Cuisinart

Cuisinart Continuous Feed CFA-10 Útmutató

25 Augusztus 2024
Cuisinart

Cuisinart FP-7 Útmutató

22 Augusztus 2024
Cuisinart

Cuisinart FP-9 Útmutató

22 Augusztus 2024
Cuisinart

Cuisinart CBT700E Útmutató

18 Augusztus 2024
Cuisinart

Cuisinart DFP-14CPY Útmutató

18 Augusztus 2024

Útmutatók Konyhai robotgép

Legújabb útmutatók Konyhai robotgép

Costway

Costway EP24647 Útmutató

4 Április 2025
Concept

Concept SM3382 Útmutató

31 Március 2025
Reber

Reber 9508 N Útmutató

30 Március 2025
Reber

Reber 9500 N Útmutató

30 Március 2025
Reber

Reber 8683 N Útmutató

30 Március 2025
Ninja

Ninja BN650UK Útmutató

27 Március 2025
KitchenAid

KitchenAid 5KFP0921 Útmutató

27 Március 2025
TriStar

TriStar MX-4804 Útmutató

15 Január 2025
Create

Create CHEF CHOP Útmutató

15 Január 2025
Bredeco

Bredeco BCPM-1200-EXP Útmutató

15 Január 2025