Használati útmutató Crystorama Alexa ALX-4501-AG

Crystorama Verlichting Alexa ALX-4501-AG

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Crystorama Alexa ALX-4501-AG (2 oldal) a Verlichting kategóriában. Ezt az útmutatót 2 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/2
How to Install
All electrical components must be
installed by a licensed electrician
in accordance with the National
Electric Code and the appropriate
local electrical codes.
®
ASSEMBLY INSTRUCTION MODEL #ALX-4501-AG
This is a convertible piece. Installation steps for both
Hard-Wire and Plug-In options are below
4.75
13.25
9
4.5
14
18.5
5
9
25
For Hard-wired installation, please proceed as follows:
1.Remove the plug wires from the fixture wires.
2.Remove the Nut (I) from the bottom of Back Plate (B)
and cover the hole with Plug (H).
6.Attach the Glass (E) onto Metal Cover (D) and secure
it with the Metal Spacer (F) and Socket Ring (G).
For Plug-in installation, please proceed as follows:
1.Connect Rod (J) to the bottom of Back Plate (B).
2.Determine the desired location you'd like to put
this fixture on the wall, and mark two points on
it with same distance as between the holes on
the Back Plate (B).
3.Drill the holes at the marked points and insert
the anchors into the holes in the wall.Attach
the mounting plate onto the wall by anchor screws.
4.Attach the Back Plate (B) onto mounting plate.
1
WARNING: This product can expose you to Lead,
which is known to the State of California to cause cancer
and/or birth defects or reproductive harm. For more
information go to www.P65Warnings.ca.gov
3.Determine the desired location you'd like to put
this fixture on the wall, and mark two points on
it with same distance as between the holes on
the Back Plate (B).
4.Drill the holes at the marked points and insert
the anchors into the holes in the wall.Attach
the mounting plate onto the wall by anchor screws.
5.Attach the Back Plate (B) onto mounting plate.
5.Attach the Glass (E) onto Metal Cover (D) and secure
it with the Metal Spacer (F) and Socket Ring (G).
Part Number
Part Numbers
PART NUMBER MODEL #ALX-4501-AG
A.Mounting Hardware
(1)Mounting Plate
(2)Wire Nut
(4)Anchors
(4)Anchor Screws
(4)Screws
B.(1)Back plate;9″x4.75″x1″h;XMO4501AGBKP4.75IN
or
AB
C
C.(1)Lamp Arm
D
D.(1)Metal Cover
E.(1)Glass Shade;4″x5″x9″;XMO4501GLASHA5IN
E
F
G
F.(1)Metal Spacer
G.(1)Socket Ring
H
J
H.(1)Plug;XMO4501AGPLUG
I.(2)Nut
J.(2)Rod;Ø3/8″x12″h;XMO4501AGCROD12IN
I

Termékspecifikációk

Márka: Crystorama
Kategória: Verlichting
Modell: Alexa ALX-4501-AG

Szüksége van segítségre?

Ha segítségre van szüksége Crystorama Alexa ALX-4501-AG, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók Verlichting Crystorama

Útmutatók Verlichting

Legújabb útmutatók Verlichting