Használati útmutató CRUX RVCTY-71

CRUX tolatókamera RVCTY-71

Olvassa el alább 📖 a magyar nyelvű használati útmutatót CRUX RVCTY-71 (1 oldal) a tolatókamera kategóriában. Ezt az útmutatót 5 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/1
TOYOTA
2012
-
2014
2012 - 2013
Camry
Prius
2012 - 2013
2012 - 2014
Tundra
Venza
TY-71 T-Harness
CUL-04 Camera
INSTALLING THE CAMERA AND CABLE
1. Open trunk and remove trunk door liner by removing the plastic snap rivets.
2. Remove lip panel where the camera will be mounted to.
3. Drill a hole at the center of the lip panel using the hole saw provided.
4. Attach the double-sided weather strip to the screw base of the camera prior to mounting and run the camera
cable into the hole.
5. Insert the screw base through the cable and screw on the camera to the lip panel.
6. Mate the 4-pin male barrel connector of the camera cable to the extension cable.
7. Run extension cable towards the back of the factory radio.
8. Remove the factory radio from the dashboard and unplug the factory 16-Pin connector from the OEM radio.
9. Mate the Crux 16-Pin T-harness between the OE harness and radio then plug in the Yellow RCAs.
10. Test the camera, then re-install the radio into the dash.
1
rev.030317

Termékspecifikációk

Márka: CRUX
Kategória: tolatókamera
Modell: RVCTY-71

Szüksége van segítségre?

Ha segítségre van szüksége CRUX RVCTY-71, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók tolatókamera CRUX

CRUX

CRUX CMB-17C Útmutató

30 December 2025
CRUX

CRUX CMB-16K Útmutató

30 December 2025
CRUX

CRUX CMB-16G Útmutató

30 December 2025
CRUX

CRUX CMB-15S Útmutató

30 December 2025
CRUX

CRUX RVCCH-75DC Útmutató

14 Augusztus 2024
CRUX

CRUX RVCCH-75WTC Útmutató

13 Augusztus 2024
CRUX

CRUX CNS-03V Útmutató

13 Augusztus 2024
CRUX

CRUX CVW-07G Útmutató

12 Augusztus 2024
CRUX

CRUX RVCCH-75EC Útmutató

12 Augusztus 2024
CRUX

CRUX CNS-01N Útmutató

12 Augusztus 2024

Útmutatók tolatókamera

Legújabb útmutatók tolatókamera