Használati útmutató Crown IQ-P.I.P.-SLM

Crown nincs kategorizálva IQ-P.I.P.-SLM

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Crown IQ-P.I.P.-SLM (29 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 2 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/29
100471-1
7/97
Printed on
recycled paper.
©1997 by Crown International, Inc., P.O. Box 1000, Elkhart, Indiana 46515-1000 U.S.A. Telephone: 219-
294-8000. The
IQ–P.I.P.–SLM
is produced by the Professional Audio Division of Crown International, Inc.
Trademark Notice:
MPX-6
,
SMX-6
and
Macro Reference
are trademarks and
Amcron
®,
Crown
®,
IQ
System
®,
IOC
®,
ODEP
®,
Macro-Tech
®,
Com-Tech
® and
P.I.P.
® are registered trademarks of Crown
International, Inc. Other trademarks are the property of their respective owners.
An IQ System
®
Programmable Input Processor with Load Monitoring
for Crown
®
P.I.P.
®
-compatible Power Amplifiers
WORLDWIDE
SUMMARY OF WARRANTY
The Crown Audio Division of Crown International, Inc., 1718 West
Mishawaka Road, Elkhart, Indiana 46517-4095 U.S.A. warrants to you,
the ORIGINAL PURCHASER and ANY SUBSEQUENT OWNER of each
NEW Crown1 product, for a period of three (3) years from the date of
purchase by the original purchaser (the “warranty period”) that the new
Crown product is free of defects in materials and workmanship, and we
further warrant the new Crown product regardless of the reason for failure,
except as excluded in this Crown Warranty.
1
Note: If your unit bears the name “Amcron,” please substitute it for the
name “Crown” in this warranty.
ITEMS EXCLUDED FROM THIS CROWN WARRANTY
This Crown Warranty is in effect only for failure of a new Crown product
which occurred within the Warranty Period. It does not cover any product
which has been damaged because of any intentional misuse, accident,
negligence, or loss which is covered under any of your insurance
contracts. This Crown Warranty also does not extend to the new Crown
product if the serial number has been defaced, altered, or removed.
WHAT THE WARRANTOR WILL DO
We will remedy any defect, regardless of the reason for failure (except as
excluded), by repair, replacement, or refund. We may not elect refund
unless you agree, or unless we are unable to provide replacement, and
repair is not practical or cannot be timely made. If a refund is elected, then
you must make the defective or malfunctioning product available to us free
and clear of all liens or other encumbrances. The refund will be equal to
the actual purchase price, not including interest, insurance, closing costs,
and other finance charges less a reasonable depreciation on the product
from the date of original purchase. Warranty work can only be performed
at our authorized service centers. We will remedy the defect and ship the
product from the service center within a reasonable time after receipt of the
defective product at our authorized service center.
HOW TO OBTAIN WARRANTY SERVICE
You must notify us of your need for warranty service not later than ninety
(90) days after expiration of the warranty period. All components must be
shipped in a factory pack. Corrective action will be taken within a
reasonable time of the date of receipt of the defective product by our
authorized service center. If the repairs made by our authorized service
center are not satisfactory, notify our authorized service center
immediately.
DISCLAIMER OF CONSEQUENTIAL AND INCIDENTAL DAMAGES
YOU ARE NOT ENTITLED TO RECOVER FROM US ANY INCIDENTAL
DAMAGES RESULTING FROM ANY DEFECT IN THE NEW CROWN
PRODUCT. THIS INCLUDES ANY DAMAGE TO ANOTHER PRODUCT
OR PRODUCTS RESULTING FROM SUCH A DEFECT.
WARRANTY ALTERATIONS
No person has the authority to enlarge, amend, or modify this Crown
Warranty. This Crown Warranty is not extended by the length of time which
you are deprived of the use of the new Crown product. Repairs and
replacement parts provided under the terms of this Crown Warranty shall
carry only the unexpired portion of this Crown Warranty.
DESIGN CHANGES
We reserve the right to change the design of any product from time to time
without notice and with no obligation to make corresponding changes in
products previously manufactured.
LEGAL REMEDIES OF PURCHASER
No action to enforce this Crown Warranty shall be commenced later than
ninety (90) days after expiration of the warranty period.
THIS STATEMENT OF WARRANTY SUPERSEDES ANY OTHERS
CONTAINED IN THIS MANUAL FOR CROWN PRODUCTS.
9/90
NORTH AMERICA
SUMMARY OF WARRANTY
The Crown Audio Division of Crown International, Inc., 1718 West Mishawaka
Road, Elkhart, Indiana 46517-4095 U.S.A. warrants to you, the ORIGINAL
PURCHASER and ANY SUBSEQUENT OWNER of each NEW Crown prod-
uct, for a period of three (3) years from the date of purchase by the original
purchaser (the “warranty period”) that the new Crown product is free of defects
in materials and workmanship. We further warrant the new Crown product
regardless of the reason for failure, except as excluded in this Warranty.
ITEMS EXCLUDED FROM THIS CROWN WARRANTY
This Crown Warranty is in effect only for failure of a new Crown product which
occurred within the Warranty Period. It does not cover any product which has
been damaged because of any intentional misuse, accident, negligence, or loss
which is covered under any of your insurance contracts. This Crown Warranty
also does not extend to the new Crown product if the serial number has been
defaced, altered, or removed.
WHAT THE WARRANTOR WILL DO
We will remedy any defect, regardless of the reason for failure (except as
excluded), by repair, replacement, or refund. We may not elect refund unless
you agree, or unless we are unable to provide replacement, and repair is not
practical or cannot be timely made. If a refund is elected, then you must make
the defective or malfunctioning product available to us free and clear of all liens
or other encumbrances. The refund will be equal to the actual purchase price,
not including interest, insurance, closing costs, and other finance charges less
a reasonable depreciation on the product from the date of original purchase.
Warranty work can only be performed at our authorized service centers or at the
factory. We will remedy the defect and ship the product from the service center
or our factory within a reasonable time after receipt of the defective product at
our authorized service center or our factory. All expenses in remedying the
defect, including surface shipping costs in the United States, will be borne by us.
(You must bear the expense of shipping the product between any foreign
country and the port of entry in the United States and all taxes, duties, and other
customs fees for such foreign shipments.)
HOW TO OBTAIN WARRANTY SERVICE
You must notify us of your need for warranty service not later than ninety (90)
days after expiration of the warranty period. All components must be shipped
in a factory pack, which, if needed, may be obtained from us free of charge.
Corrective action will be taken within a reasonable time of the date of receipt of
the defective product by us or our authorized service center. If the repairs made
by us or our authorized service center are not satisfactory, notify us or our
authorized service center immediately.
DISCLAIMER OF CONSEQUENTIAL AND INCIDENTAL DAMAGES
YOU ARE NOT ENTITLED TO RECOVER FROM US ANY INCIDENTAL
DAMAGES RESULTING FROM ANY DEFECT IN THE NEW CROWN
PRODUCT. THIS INCLUDES ANY DAMAGE TO ANOTHER PRODUCT OR
PRODUCTS RESULTING FROM SUCH A DEFECT. SOME STATES DO
NOT ALLOW THE EXCLUSION OR LIMITATIONS OF INCIDENTAL OR
CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR
EXCLUSION MAY NOT APPLY TO YOU.
WARRANTY ALTERATIONS
No person has the authority to enlarge, amend, or modify this Crown Warranty.
This Crown Warranty is not extended by the length of time which you are
deprived of the use of the new Crown product. Repairs and replacement parts
provided under the terms of this Crown Warranty shall carry only the unexpired
portion of this Crown Warranty.
DESIGN CHANGES
We reserve the right to change the design of any product from time to time
without notice and with no obligation to make corresponding changes in
products previously manufactured.
LEGAL REMEDIES OF PURCHASER
THIS CROWN WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, YOU
MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.
No action to enforce this Crown Warranty shall be commenced later than ninety
(90) days after expiration of the warranty period.
THIS STATEMENT OF WARRANTY SUPERSEDES ANY OTHERS
CONTAINED IN THIS MANUAL FOR CROWN PRODUCTS.
9/90
Telephone: 219-294-8200. Facsimile: 219-294-8301Telephone: 219-294-8200. Facsimile: 219-294-8301
THREE YEAR
FULL WARRANTY
YEAR
3
YEAR
3
Page 3
IQ–P.I.P.–SLM Programmable Input Processor with Load Monitoring for IQ Systems
Reference Manual
Quick Install Procedure
This procedure is provided for those who are already familiar with Crown’s
IQ System
and who would like to install the
IQ–P.I.P.–SLM
in the shortest time possible. Less
experienced installers or those wishing a full explanation of the installation procedure
are encouraged to go to Section 4 where the full installation procedure is described.
Prepare the IQ–P.I.P.–SLM:
1. Set the IQ address switch SW1 (see Figures 4.1 and 4.2) on the
IQ–P.I.P.–SLM
to an
unused IQ address. (Tip: Record the IQ address on the small blank label that is pro-
vided on the
P.I.P.
panel.)
Prepare the amplifier:
2. Turn down the level controls of the amplifier and turn off the amplifier.
3. Unplug the power cord of the amplifier from the AC mains.
4. Remove the existing
P.I.P.
or cover panel from the amplifier back panel (two screws).
Install the IQ–P.I.P.–SLM into the amplifier:
5. Carefully ground yourself to the chassis of the amplifier before installing the
IQ–P.I.P.
SLM
. It is a good idea to maintain ground contact between yourself and the amplifier
while inserting the module into the amplifier in the next step.
6. Turn the P.I.P. upside down so you can clearly see the two ribbon cable connectors
located on the underside of the top board near the back corner (see Figure 4.3). Attach
the ribbon cables from your amp to the ribbon-cable connectors. The 20-pin cable
should be connected first, then the 18-pin cable should be connected. Both ribbon
cables should run untwisted from the amplifier to the
P.I.P.
card.
Important: Important: Important: Important: Important: Be careful when attaching the ribbon cable to the connector that the cable
is properly seated before applying pressure to the connector. Forcing the cable onto
the connector could cause the keying tabs, which ensure proper pin alignment, to
break. Connecting the ribbon cables with improper pin alignments may well result in
catastrophic damage to the P.I.P. component.
When both cables are firmly attached, turn the
IQ–P.I.P.–SLM
back to an upright posi-
tion and insert into the
P.I.P.
opening in the back of the amplifier. Take care while insert-
ing the
P.I.P.
to make sure you do not crimp, pinch or stretch the ribbon cables.
7. Tighten the two
P.I.P.
mounting screws until it is secured to the amplifier back panel.
Install the wiring:
8. Connect the
IQ–P.I.P.–SLM
to the
IQ System
via the Crown Bus (see Section 4.6 if more
information is needed).
9. Connect the audio signal wiring to the
IQ–P.I.P.–SLM
(see Section 4.7 if more informa-
tion is needed).
10. Connect the amplifier back to the AC receptacle.

Termékspecifikációk

Márka: Crown
Kategória: nincs kategorizálva
Modell: IQ-P.I.P.-SLM

Szüksége van segítségre?

Ha segítségre van szüksége Crown IQ-P.I.P.-SLM, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók nincs kategorizálva Crown

Crown

Crown P.I.P.-AMC Útmutató

30 Augusztus 2024
Crown

Crown P.I.P.-AF Útmutató

30 Augusztus 2024
Crown

Crown P.I.P.-FPX Útmutató

25 Augusztus 2024
Crown

Crown RTA-2 Útmutató

25 Augusztus 2024
Crown

Crown P.I.P.-FXT Útmutató

25 Augusztus 2024
Crown

Crown IQ-RPT Útmutató

25 Augusztus 2024
Crown

Crown IQ-PIP-USP2 Útmutató

25 Augusztus 2024
Crown

Crown SL-1 Útmutató

25 Augusztus 2024

Útmutatók nincs kategorizálva

Legújabb útmutatók nincs kategorizálva