Használati útmutató Craftsman CMXPTSG1010NB

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Craftsman CMXPTSG1010NB (46 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 6 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/46
Air Hammer
Martillo neumático
Marteau pneumatique
CMXPTSG1010NB
IN CT N U D’ I T U D N R NESSTRU IO MAN AL | GUIDE UTIL SA ION | MAN AL E I ST UCCIO
IF YOU HAVE QUESTIONS OR COMMENTS, CONTACT US.
POUR TOUTE QUESTION OU TOUT COMMENTAIRE, NOUS CONTACTER.
SI TIENE DUDAS O COMENTARIOS, CONTÁCTENOS.
1 1 WWW.CRA M COM-888-33 -4569 FTS AN.
1
ENGLISH
Components
1Air Hammer
2 Spring Retainer
3Chisel
4Trigger
5Cylinder
6Air Inlet
Fig. A
Definitions: Safety Alert Symbols and Words
This instruction manual uses the following safety alert symbols and words to alert you to
hazardous situations and your risk of personal injury or property damage.
DANGER ll: wi Ind cates an y h us sit n wh t ai imminentl azardo uatio ich, oif n voided, result in
death or serious injury.
WARNING could: Ind cates a potentially h us sit n wh t ai azardo uatio ich, oif n voided, result
in .death or serious injury
CAUTION may: Ind cates a potentially h us sit n wh t ai azardo uatio ich, oif n voided, result in
minor or moderate injury.
NOTICE may: Ind cates a practice wh t ai not related to personal injury ich, oif n voided,
result in property damage.
( i u ord ica a l d e.Used w tho t w ) Ind tes a s fety re ate messag
WARNING: Read all safety warnings and all
i i nstruct ons. Fa lilure to fo low the warnings
an nstr ct t d i u i lons may resu in electric shock, fire
a or serious injury.nd/
WARNING: Never mod fy the i product or any
pa . Damage or personal injury could result.rt of it
WARNING: T c i f , e o redu e the r sk o injury read th
instruction manual.
If you have any questions or comments about
this or any product, call CRAFTSMAN toll free
at: 1-888-331-4569.
2
4
3
1
6
5
Specifications
Model CMXPTSG1010NB
Chisel Shank Diameter 0.401" (10.2 mm)
Stroke Length 1-5/8"
Blow Per Minute 2,800 b.p.m
Average Air Consumption 4.4 scfm
Air Inlet 1/4" npt
Air Hose 3/8" (9.53 mm)
Working Pressure 90 psi
Air Hammer
2
ENGLISH
WARNING: Failure to observe and follow safety instructions could result in injury or death.
WARNING: Improper operation or maintenance of this tool could result in serious injury
and property damage. Read and understand all warnings and operation instructions before
using this tool. When using any tool, basic safety precautions should always be followed to
reduce the risk of personal injury. Anticipate and be alert for sudden changes in motion
during startup and operation of any power tool. Do not operate tool if trigger does not turn
the tool on or off. Do not use this tool at heights exceeding 6 feet (2m). Use each tool for its
intended function only. Do not use this product in unsafe work conditions. It is always
recommended to keep a fire extinguisher and first aid kit near work areas.
WARNING: User must also read the compressor manual and follow all compressor safety
instructions
CMXPTSG1010NB
Compressor requirements
IMPORTANT: To operate correctly, this tool requires airflow that is at least 4.4 cubic feet per
minute (SCFM) at 90 pounds per square inch (PSI). Check the specifications of your air
compressor to be sure that it can support both the minimum SCFM and PSI required. The air
hose length could affect how much air pressure the tool is actually receiving. You may need to
adjust the air pressure higher on the air regulator to achieve the working pressure of 90 PSI.
4.4 SCFM @ 90 PSI
Tool Requirements
Exigences relatives aux outils
Requisitos de herramientas

Termékspecifikációk

Márka: Craftsman
Kategória: nincs kategorizálva
Modell: CMXPTSG1010NB

Szüksége van segítségre?

Ha segítségre van szüksége Craftsman CMXPTSG1010NB, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók nincs kategorizálva Craftsman

Útmutatók nincs kategorizálva

Legújabb útmutatók nincs kategorizálva