Használati útmutató Cisco SPA 508G

Cisco telefon SPA 508G

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Cisco SPA 508G (2 oldal) a telefon kategóriában. Ezt az útmutatót 3 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF

Oldal 1/2

Quick Start Guide

Cisco Small Business

IP Phone Models SPA501G, SPA502G, SPA504G,

SPA508G, and SPA509G

Package Contents

•IP Telephone

•Phone Stand

•RJ-45 Ethernet Cable

•Quick Start Guide

•Documentation on CD-ROM

Welcome

Thank you for choosing the Cisco Small Business IP phone. This guide

describes how to install your phone and how to perform some basic tasks. The

features available on your phone depend on the type of system to which your

phone is connected. Your phone system might not provide all of the features

mentioned in this document. Contact your phone system administrator for

questions about phone features.

Installing Your IP Phone

Use these procedures to install the phone and connect it to your network.

S 1TEP Turn the phone body over to expose the ports on the back of the unit.

CAUTION Do not insert a telephone line cord into the auxiliary port.

S 2TEP Insert the long end of the phone cord into the handset port on the

phone body that is marked with a phone symbol.

S 3TEP (Optional) Route the phone cord through the cable slot.

S 4TEP Insert the other end of the phone cord into the port at the bottom of the

handset (not shown).

S 5TEP (Optional) Connect the phone stand by lining up the tabs on the stand

with the slots on the phone body. Slide the bottom tabs into the lower

slots on the phone body and lightly press down on the stand. It should

easily slide into the upper stand slots. Do not force.

S 6TEP If you are using an external power source, insert one end of the power

cord into an outlet and insert the other end of the power cord into the

power port on the phone body.

S 7TEP Connect your phone to the network:

•Using an Ethernet Connection—Insert one end of the Ethernet cable

into the network port on the phone body marked “SW.” Insert the

other end of the Ethernet cable into the appropriate device, such as

a network switch, on your network.

•Using a Wireless Connection—You can use a Cisco WBP54G

Wireless-G Bridge with the IP phone to create a wireless

connection between the phone and the network. See the WBP54G

documentation on Cisco.com for more information. The Where to

Go From Here section contains links to the documentation area on

Cisco.com

S 8TEP (Optional) To provide network access to a PC, connect one end of an

additional Ethernet cable (not provided) to the PC port on the back of

the phone body. Connect the other end of the Ethernet cable to the

network port on your PC.

S 9TEP (Optional) To install the phone on a vertical surface, use the Cisco

MB100 Wall Mount bracket. See the

Cisco Small Business IP Phone

SPA50X User Guide (SIP)

or the

Cisco Unified Communications

Manager Express for the Cisco Small Business IP Phone SPA50X

documents on Cisco.com for more information. The Where to Go From

Here section contains links to the documentation area on Cisco.com.

Phone Lines and Buttons

The photo above shows the Cisco SPA509G. Other models differ.

Numbered objects in the photo are explained in the following table.

# Phone Feature Description

1 Handset Pick up to place or answer a call.

2 Message Waiting

Indicator

Displays solid red when you have a new voice

mail message. Flashes red during an incoming call

or when the phone’s firmware is being updated.

(Behavior may differ depending on phone system.)

3 LCD Screen Displays date and time, phone station name, line

extensions, and softkey options. (Not available on

the Cisco SPA501G.)

4 Line keys Indicates phone line status. (Not available on the

Cisco SPA502G.) These keys can also be

programmed by your phone system administrator

to perform functions such as speed dial, call

pickup, or monitoring an extension.

Line colors depend on the type of phone system

to which your phone is connected. (SIP or SPCP).

See the User Guide for your phone for more

information. The Where to Go From Here section

contains links to the documentation area on

Cisco.com.

5 Softkey buttons Press a softkey button to perform the action

shown on the label on the LCD screen above.

Note

NoteNote: The Cisco SPA501G has the following four

buttons:

Redial—Dials the last number called.

Cancel—Cancels an action (such as a

transfer).

Conference—While on a call, press to start

a conference call and dial another number.

After the second party answers, press

Conf

ConfConference

erence

erenceerence again to create the conference.

Transfer—While on a call, press to transfer,

then dial the number to which to transfer.

Press Tr

TrTra

aan

nns

ssf

ffe

eer

rr again to transfer the call.

6 Navigation button Press an arrow to scroll left, right, up, or down

through items shown on the LCD screen. (Not

available on the Cisco SPA501G.)

7 Messages button Press to access voice mail (must be set up by

your phone system administrator).

8 Hold button Press to place a call on hold.

# Phone Feature Description

Americas Headquarters

Cisco Systems, Inc.

170 West Tasman Drive

San Jose, CA 95134-1706

USA

www.cisco.com

Small Business Support US: 1-866-606-1866 (Toll Free, 24/7)

Small Business Support, Global: www.cisco.com/go/sbsc

Cisco and the Cisco Logo are trademarks of Cisco Systems, Inc. and/or its affiliates in the U.S. and

other countries. A listing of Cisco's trademarks can be found at www.cisco.com/go/trademarks.

Third party trademarks mentioned are the property of their respective owners. The use of the word

partner does not imply a partnership relationship between Cisco and any other company. (1005R)

78-19101-02

9 Setup button Press to access a menu to configure features and

preferences (such as your directory and speed

dials), access your call history, and set up

functions (such as call forwarding).

For the Cisco SPA501G, accesses the Interactive

Voice Response menu, which allows you to

perform tasks like getting the IP address of the

phone. See the User Guide documents on

Cisco.com for more information. The Where to Go

From Here section contains links to the

documentation area on Cisco.com.

10 Mute button Press to mute or unmute the phone. When phone

is muted, the button glows red. A flashing mute

button indicates the network connection cannot

be found.

11 Volume button Press +

++ to increase the volume and -

-- to lower the

volume of the handset, headset, speaker (when

the handset is off the phone, or ringer volume

(when the handset is on the phone).

# Phone Feature Description

Softkey Buttons

The softkey buttons and labels on your phone display vary depending on your

phone model and the phone system setup. (Softkey buttons are not available

on the Cisco SPA501G.) Press the right arrow on the navigation button to view

additional softkey buttons. Below is a partial listing of softkey buttons that may

be available on your phone.

12 Headset button Push to turn the headset on or off. When the

headset is on, the button glows green.

13 Speaker button Push to turn the speaker on or off. When the

speaker is on, the button glows green.

14 Keypad Use to dial phone numbers, enter letters, and

choose menu items.

Button Function

<< or >> Move left or right through an entry without deleting

characters.

add Add an entry.

bXfer Performs a blind call transfer (transferring a call without

speaking to the party to whom you are transferring the call.)

cancel Cancels any changes you have made (press before ok

okok or

sav

savsave

ee).

cfwd/CFwdAll Forwards all calls coming to your phone to a specified

number.

clear Clears the call history.

conf/Confrn Initiates a conference call.

confLx Conferences active lines on the phone together.

delChr Deletes the last number or letter.

delete Deletes an entire item (for example, a number from the Call

History list).

dial Dials a number.

dir Provides access to phone directories.

dnd/DnD Do Not Disturb; prevents incoming calls from ringing your

phone.

-dnd Clears Do Not Disturb.

edit Opens an item so that you can edit numbers or letters, or

enable or disable a feature.

Exit Closes a menu.

# Phone Feature Description

Using Your IP Phone

Placing or Answering Calls

To place or answer a call, you can pick up the handset, press the Speaker

Speaker

SpeakerSpeaker or

Headset

HeadsetHeadset button, or press a line button (on some phones).

Putting a Call on Hold

To put a call on hold, press the Hold

Hold

HoldHold button. The caller hears a series of three

rapid beeps or music while on hold.

To resume the call, press the flashing red line button for the call. For the Cisco

SPA502G, press the re

reresu

susum

mme

ee softkey.

grPick/GPickUp Allows you to answer a call ringing on an extension by

discovering the number of the ringing extension.

lcr Returns the last missed call by dialing the number that

called you.

miss Shows the Missed Calls list.

more Displays other softkey buttons that are available.

NewCall Press to start a new call.

Option Press this button to display options. To choose the

displayed option, press OK

OKOK.

park Puts a call on hold at a designated “park” number. The call is

parked on the line until you unpark it or the caller

disconnects. Must be configured by your phone system

administrator.

pickup Allows you to answer a call ringing on another extension by

entering the extension number.

redial Displays a list of recently dialed numbers.

resume Resumes a call that is on hold.

save Saves your changes.

select Selects the highlighted item on the LCD screen.

unpark Resumes a parked call.

xfer/Trnsfer Performs a call transfer.

xferLx Transfers an active line on the phone to a called number.

y/n Enters a submenu and when pressed, toggles between Ye

YeYes

or No

NoNo to enable or disable an option.

Button Function

Ending a Call

If you are using the handset, hang up or press the EndCall

EndCall

EndCallEndCall softkey (on some

phones). If you are using the speakerphone, press the Speaker

Speaker

SpeakerSpeaker button. If you

are using the headset, either press the Headset

Headset

HeadsetHeadset button (wired) or replace the

handset (wireless).

Adjusting Volume and Muting

To adjust the volume of the handset or speaker, lift the handset or press the

speaker button. Press +

++ on the Vo

VoVol

llu

uum

mme

ee button to increase the volume, or press

-- to decrease the volume. Press Save

Save

SaveSave.

To adjust the ringer volume, press the Vo

VoVol

llu

uum

mme

ee button when the handset is on

the phone and the speaker button is off. Press Sa

SaSave

veve.

To mute the phone microphone, speaker, or headset microphone, press the

Mut

MutMute

ee button on the phone. The button glows red. Press the Mute

Mute

MuteMute button again

to unmute.

Using Keypad Shortcuts

When using the phone menus, you can use the keypad to enter the number

shown next to the menu or sub-menu item on the LCD screen. (Not applicable

to the Cisco SPA501G.) For example, to obtain your IP address on the Cisco

SPA504G, press the Set

Set

SetSetup

upup button and dial 9

99.

The IP address is displayed on the Network screen.

NOTE Menus and options vary depending on phone model.

Where to Go From Here

Support

Cisco Small Business

Support Community

www.cisco.com/go/smallbizsupport

Cisco Small Business

Support and Resources

www.cisco.com/go/smallbizhelp

Phone Support Contacts www.cisco.com/en/US/support/

tsd_cisco_small_business

_support_center_contacts.html

Cisco Small Business

Firmware Downloads

www.cisco.com/cisco/web/download/

index.html

Select a link to download firmware for Cisco

Small Business Products. No login is

required.

Downloads for all other Cisco Small Business

products, including Network Storage

Systems, are available in the Download area

on Cisco.com at www.cisco.com/go/

software.

Product Documentation

Cisco Small Business

SPA500 Series IP Phones

www.cisco.com/go/spa500phones

Accessories (includes

WBP54G and MB100)

www.cisco.com/en/US/products/ps10499/

tsd_products_support_series_home.html

Cisco Small Business

Cisco Partner Central

for Small Business

(Partner Login Required)

www.cisco.com/web/partners/sell/smb

Cisco Small Business

Home

www.cisco.com/smb

Termékspecifikációk

Márka:	Cisco
Kategória:	telefon
Modell:	SPA 508G

Szüksége van segítségre?

Ha segítségre van szüksége Cisco SPA 508G, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek

Az Ön neve*

Az Ön e-mail címe*

Írja ide kérdését

Útmutatók telefon Cisco

Cisco SPA 941 Útmutató

3 Október 2024

Cisco 7942G Útmutató

20 Szeptember 2024

Cisco 521G Útmutató

31 Augusztus 2024

Cisco SPA 525G2 Útmutató

25 Augusztus 2024

Cisco 6825 Útmutató

21 Augusztus 2024

Cisco SPA 301G Útmutató

8 Augusztus 2024

Cisco 7961 Útmutató

2 Augusztus 2024

Cisco 7925G-EX Útmutató

31 Július 2024

Cisco 7941G Útmutató

30 Július 2024

Cisco 524G Útmutató

29 Július 2024

Útmutatók telefon

Legújabb útmutatók telefon

Panasonic KX-TGC202 Útmutató

4 Április 2025

HMD 150 Music Útmutató

31 Március 2025

Vimar R289 Útmutató

30 Március 2025

Trevi FLEX 51 Útmutató

18 Március 2025

Profoon PDX-5900 Útmutató

15 Január 2025

Gigaset A400A Útmutató

14 Január 2025

Alcatel Smile Útmutató

14 Január 2025

Audioline TEL38 Útmutató

13 Január 2025

Alcatel Versatis 80 Útmutató

13 Január 2025

Teledex SIP ND210L Útmutató

13 Január 2025