Használati útmutató Chauvet SlimPAR Q12BT ILS

Chauvet Lampa SlimPAR Q12BT ILS

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Chauvet SlimPAR Q12BT ILS (8 oldal) a Lampa kategóriában. Ezt az útmutatót 2 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/8
Quick Reference Guide
English EN
Español ES
Français FR
Deutsch DE
Italiano IT
Nederlands NL
Scan the QR code to
access the product page,
warranty terms, and the
complete User Manual
1
EN
QUICK REFERENCE GUIDE
SlimPAR Q12BT ILS QRG Rev. 1
Safety Notes
These Safety Notes include important information about installation, use, and maintenance of the SlimPAR Q12BT ILS.
FCC Statement of Compliance
This device complies with Part 15 Part B of the FCC rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment do interference to es cause harmful
radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
What is Included
Control Panel Description
ILS Connection
The SlimPAR Q12BT ILS uses the DMX data connection and the D-Fi USB for wireless connection to the Integrated
Lighting System (ILS) ecosystem (patent pending). For more information about configuring the SlimPAR Q12BT ILS into
ILS mode, please refer to the User Manual available at www.chauvetdj.com.
ALWAYS:
Connect to a grounded circuit.
Connect to operating voltages as specified on the product's spec sticker.
Disconnect from power before replacing the fuse.
Disconnect from its power source during periods of inactivity.
Use a safety cable when suspending overhead.
Heed all restrictions and warnings on the spec sticker.
Mount in a location with at least 20 in (50 cm) of ventilation.
Replace the fuse with the same type and rating.
In the event of a serious operating problem, stop using immediately.
DO NOT:
Open this product or attempt any repairs. It contains no user-serviceable parts.
Look at the light source when the product is on.
Use if the power cord is crimped or damaged.
Disconnect by pulling on the power cord.
Allow flammable materials close to the product when it is operating.
Touch the housing when it is on.
Block any ventilation holes/slots in the housing.
Connect to a dimmer or rheostat.
Carry the product by its power cord.
Operate in temperatures higher than 104°F (40°C).
Expose to environments that exceed the Ingress Protection (IP) rating.
Expose to rain or moisture.
Use outdoors.
Submerge.
SlimPAR Q12BT ILS Power cable Quick Reference Guide
Button Function
<MENU> Exits from the current menu or function
<UP> Navigates upwards through the menu list and increases the numeric value when in a function
<DOWN> Navigates downwards through the menu list and decreases the numeric value when in a function
<ENTER> Enables the currently displayed menu or sets the currently selected value into the selected function
glish
ES
2
SlimPAR Q12BT ILS GRR Rev. 1
GUÍA DE REFERENCIA RÁPIDA
Notas de seguridad
Estas notas de seguridad incluyen informacn importante sobre la instalación, el uso y el mantenimiento de SlimPAR Q12BT ILS.
Declaración de conformidad de la FCC
Este dispositivo cumple con la Parte 15 Parte B de las normas de la FCC. El funcionamiento está sujeto a las dos
condiciones siguientes:
1. Este dispositivo no puede causar interferencias perjudiciales, y
2. Este dispositivo debe aceptar cualquier interferencia recibida, incluyendo las que puedan causar un
funcionamiento no deseado.
Este equipo ha sido probado y cumple los límites establecidos para los dispositivos digitales de Clase B, de conformidad
con la Parte 15 de las normas de la FCC. Estos límites están diseñados para proporcionar una protección razonable
contra las interferencias perjudiciales en una instalación residencial. Este equipo genera, utiliza y puede irradiar energía
de radiofrecuencia y, si no se instala y utiliza de acuerdo con las instrucciones, puede causar interferencias perjudiciales
en las comunicaciones por radio. Sin embargo, no hay garantía de que no se produzcan interferencias en una instalación
concreta. Si este equipo causa interferencias perjudiciales en la recepción de radio o televisión, lo cual puede
determinarse apagando y encendiendo el equipo, se recomienda al usuario que intente corregir las interferencias
mediante una o varias de las siguientes medidas:
Reorientar o reubicar la antena receptora.
Aumentar la separación entre el equipo y el receptor.
Conectar el equipo a una toma de corriente de un circuito distinto al que está conectado el receptor.
Consulte al distribuidor o a un técnico experto en radio/TV para obtener ayuda.
Cualquier cambio o modificación que no esté expresamente aprobado por la parte responsable del cumplimiento podría
anular la autoridad del usuario para operar el equipo.
Qué se incluye
Descripción del panel de control
Conexión ILS
El SlimPAR Q12BT ILS utiliza la conexión de datos DMX y el D-Fi USB para la conexión inalámbrica al ecosistema
Integrated Lighting System (ILS) (patente en trámite). Si desea más información sobre la configuración de
SlimPAR Q12BT ILS en el modo ILS, consulte el manual de usuario disponible en www.chauvetdj.com.
SIEMPRE:
Conecte a un circuito con toma de tierra.
Conecte a las tensiones de funcionamiento indicadas en la etiqueta de especificaciones del producto.
Desconecte de la corriente antes de sustituir el fusible.
Desconecte de su fuente de alimentación durante los periodos de inactividad.
Utilice un cable de seguridad cuando lo cuelgue por encima de la cabeza.
Respete todas las restricciones y advertencias que figuran en la etiqueta de especificaciones.
Monte en un lugar con al menos 50 cm (20 pulg.) de espacio de ventilación.
Sustituya el fusible por otro del mismo tipo y capacidad nominal.
En caso de un problema grave de funcionamiento, deje de usarlo inmediatamente.
NO HACER:
Abrir este producto o intentar cualquier reparación. No contiene piezas que puedan ser reparadas por el usuario.
Mirar a la fuente de luz cuando el producto esté encendido.
Utilizarlo si el cable de alimentación está doblado o dañado.
Desconectarlo tirando del cable de alimentación.
Dejar materiales inflamables cerca del producto cuando esté en funcionamiento.
Tocar la carcasa cuando esté encendido.
Bloquear los orificios/ranuras de ventilación de la carcasa.
Conectar a un atenuador o a un reostato.
Transportar el producto tirando de su cable de alimentación.
Utilizarlo a temperaturas superiores a 40 °C (104 °F).
Exponerlo a entornos que superen el índice de protección de ingreso (IP).
Exponerlo a la lluvia o a la humedad.
Utilizarlo en el exterior.
Sumergirlo.
SlimPAR Q12BT ILS Cable de alimentación Guía de referencia rápida
Botón Función
<MENU> Sale del menú o función actual
<UP> Navega hacia arriba por la lista de menús e incrementa el valor numérico cuando está en una función
<DOWN> Navega hacia abajo por la lista de menús y disminuye el valor numérico cuando está en una función
<ENTER>
Activa el menú que se muestra en ese momento o establece el valor seleccionado en ese momento en la funcn
Español

Termékspecifikációk

Márka: Chauvet
Kategória: Lampa
Modell: SlimPAR Q12BT ILS

Szüksége van segítségre?

Ha segítségre van szüksége Chauvet SlimPAR Q12BT ILS, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók Lampa Chauvet

Útmutatók Lampa

Legújabb útmutatók Lampa