Használati útmutató Canon IXUS 50

Canon kamera IXUS 50

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Canon IXUS 50 (196 oldal) a kamera kategóriában. Ezt az útmutatót 2 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/196
Please read the Read This First section
(p. 6)
.
Please also read the Canon Digital Camera Software Starter Guide Disk
and the Direct Print User Guide.
Camera User Guide
ENGLISH
Flowchart and Reference Guides
Use of genuine Canon accessories is recommended.
This product is designed to achieve excellent performance when
used with genuine Canon accessories. Canon shall not be liable for
any damage to this product and/or accidents such as fire, etc.,
caused by the malfunction of non-genuine Canon accessories (e.g.,
a leakage and/or explosion of a battery pack). Please note that this
warranty does not apply to repairs arising out of the malfunction of
non-genuine Canon accessories, although you may request such
repairs on a chargeable basis.
Shooting with the Camera
This Guide
This Guide
Canon Digital Camera
Software Starter Guide Disk
Canon Digital Camera
Software Starter Guide Disk
Direct Print User Guide
Printer User Guide
Installing the Software
Connecting the Camera to a Computer
Downloading Images to a Computer
Using the Printer and Printing
This Guide
1
Camera Body Temperature
If your camera is used for prolonged periods, the camera body may become
warm. Please be aware of this and take care when operating the camera for
an extended period.
About the LCD Monitor
The LCD monitor is produced with extremely high-precision manufacturing
techniques. More than 99.99% of the pixels operate to specification. Less
than 0.01% of the pixels may occasionally misfire or appear as red or black
dots. This has no effect on the recorded image and does not constitute a
malfunction.
Video Format
Please set the camera’s video signal format to the one used in your region
before using it with a TV monitor (p. 156).
Charging the Date/Time Battery
• The camera has a built-in rechargeable lithium-ion battery that maintains
the date, time and other camera settings. This battery recharges when the
main battery pack is inserted into the camera. When you first purchase the
camera, place a charged battery pack in it for at least 4 hours to charge
the date/time battery. It will charge even when the camera power is
turned off.
• If the Date/Time menu appears when the camera power is turned on,
it means that the date/time battery charge is depleted. Recharge it as
described above.
2
About This Guide
Conventions Used in the Text
: This mark denotes issues that may affect the camera’s operation.
: This mark denotes additional topics that complement the basic
operating procedures.
Icons appearing beside or below titles indicate the modes in which the
procedure can be used. In the example below, the procedure can be
used in the following modes.
Postcard Date Imprint Mode
Shooting Mode
In this guide an SD memory card (Secure Digital, a copyright protection
system) is referred to as an SD card.
When the Shooting mode is set to the following modes
• Auto • Manual • Portrait
• Night Snapshot • Kids&Pets • Indoor
• Underwater • My Colors
* When a shooting mode icon is shown in gray, the procedure cannot be performed in
that mode.
* The symbol indicates the Stitch Assist mode.
When the mode switch is set to (Shooting)
3
Table of Contents
Please Read......................................................................................... 6
Safety Precautions .............................................................................. 7
Preventing Malfunctions ................................................................... 12
Components Guide............................................................................ 13
Charging the Battery Pack ................................................................. 18
Installing the Battery Pack................................................................. 21
Installing the SD Card ....................................................................... 23
Setting the Date and Time ................................................................. 28
Setting the Language ........................................................................ 31
Turning the Power On ....................................................................... 34
Switching Between Shooting/Playback.............................................. 36
Using the LCD Monitor...................................................................... 37
LCD Monitor Brightness.................................................................... 39
Information Displayed on the LCD Monitor ....................................... 40
Using the Viewfinder ......................................................................... 44
Using the Zoom................................................................................. 45
Pressing the Shutter Button .............................................................. 46
Selecting Menus and Settings ........................................................... 48
Menu Settings and Factory Defaults.................................................. 53
Resetting Settings to Their Default Values ........................................ 59
Shooting in Auto Mode ..................................................................... 61
Reviewing an Image Right After Shooting......................................... 62
Changing Resolution/Compression Settings ..................................... 64
Using the Flash ............................................................................. 66
Selecting a Shooting Mode ............................................................... 68
Auto .............................................................................................. 68
Manual .......................................................................................... 68
Digital Macro................................................................................. 68
Portrait .......................................................................................... 68
Read This First
Components Guide
Preparing the Camera
Basic Functions
Shooting
Items marked with are lists or charts that summarize camera functions
or procedures.
4
Night Snapshot.............................................................................. 68
Kids&Pets...................................................................................... 68
Indoor............................................................................................ 68
Underwater.................................................................................... 68
My Colors...................................................................................... 68
Shooting Close-Ups/ Infinity Shots..................................... 71
Magnified Close-Up Shooting (Digital Macro) ................................... 73
Using the Digital Zoom ...................................................................... 74
Continuous Shooting ................................................................... 75
Postcard Date Imprint Mode.............................................................. 76
Using the Self-timer ..................................................................... 78
Shooting a Movie........................................................................ 81
Shooting Panoramic Images (Stitch Assist) ...................................... 86
Switching between Focusing Modes.................................................. 89
Shooting Hard-to-Focus Subjects (Focus Lock, AF Lock).................. 90
Locking the Exposure Setting (AE Lock)............................................ 92
Locking the Flash Exposure Setting (FE Lock)................................... 93
Switching between Metering Modes ........................................... 94
Adjusting the Exposure Compensation .............................................. 95
Shooting in Long Shutter Mode......................................................... 96
Adjusting the Tone (White Balance)................................................... 98
Changing the Photo Effect ............................................................... 101
Shooting in a My Colors Mode ........................................................ 102
Adjusting the ISO Speed.................................................................. 109
Setting the Auto Rotate Function ..................................................... 110
Resetting the File Number ............................................................... 111
Displaying Images Individually ........................................................ 113
Magnifying Images .................................................................... 114
Viewing Images in Sets of Nine (Index Playback) .................... 115
Jumping to Images............................................................... 117
Viewing Movies ............................................................................... 118
Editing Movies ................................................................................. 121
Rotating Images in the Display ........................................................ 123
Attaching Sound Memos to Images................................................. 124
Automated Playback (Slide Shows) ................................................. 126
Protecting Images ........................................................................... 130
Playback
5
Erasing Single Images ............................................................... 131
Erasing All Images .......................................................................... 132
About Printing ................................................................................. 134
Setting the DPOF Print Settings ...................................................... 136
Selecting Images for Transferring ................................................... 142
Connecting the Camera to a Computer............................................ 146
Computer System Requirements ................................................ 146
Downloading Images by Direct Transfer ......................................... 152
Connecting the Camera to the Computer to Download Images Without
Installing Software ................................................................... 154
Downloading from an SD Card ........................................................ 154
Viewing Images on a TV set ............................................................ 155
Changing My Camera Settings ........................................................ 157
Registering My Camera Settings ..................................................... 159
List of Messages ............................................................................. 162
Troubleshooting .............................................................................. 164
Using an AC Adapter Kit (Sold Separately)...................................... 169
Using an Externally Mounted Flash (Sold Separately) ..................... 170
Camera Care and Maintenance ........................................................ 172
Specifications.................................................................................. 173
Photo Tips and Information............................................................. 181
Index ............................................................................................... 183
Functions Available in Each Shooting Mode.................................... 192
Erasing
Print Settings
Image Transmission Settings (DPOF Transfer Order)
Connecting the Camera to a Computer
Viewing Images on a TV set
Customizing the Camera (My Camera Settings)
List of Messages
Troubleshooting
Appendix
6
Read This First
Please Read
Test Shots
Before you try to photograph important subjects, we highly recommend that
you shoot several trial images to confirm that the camera is operating and
being operated correctly.
Please note that Canon Inc., its subsidiaries and affiliates, and its
distributors are not liable for any consequential damages arising from any
malfunction of a camera or accessory, including SD memory cards, that
results in the failure of an image to be recorded or to be recorded in a way
that is machine readable.
Warning Against Copyright Infringement
Please note that Canon digital cameras are intended for personal use and
should never be used in a manner that infringes upon or contravenes
international or domestic copyright laws and regulations. Please be advised
that in certain cases the copying of images from performances, exhibitions,
or commercial properties by means of a camera or other device may
contravene copyright or other legal rights even if the image was shot for
personal use.
Warranty Limitations
For information on your camera's warranty, please refer to the Canon
European Warranty System (EWS) Booklet supplied with your camera.
For Canon Customer Support contacts, please see rear of this booklet or
the European Warranty System (EWS) Booklet.
7
Safety Precautions
• Before using the camera, please ensure that you read and understand the
safety precautions described below. Always ensure that the camera is
operated correctly.
• The safety precautions noted on the following pages are intended to
instruct you in the safe and correct operation of the camera and its
accessories to prevent injuries or damage to yourself, other persons and
equipment.
• In the next few pages, the term equipment refers primarily to the camera
and its power supply accessories, such as the battery charger and
separately sold compact power adapter. See the System Map for power
supply accessory details.
Warnings
• Do not aim the camera directly into the sun or at other intense light
sources that could damage your eyesight.
• Do not trigger the flash in close proximity to human or animal eyes.
Exposure to the intense light produced by the flash may damage eyesight.
In particular, remain at least one meter (39 inches) away from infants
when using the flash.
•Store this equipment out of the reach of children and infants. Accidental
damage to the camera or battery pack by a child could result in serious
injury. In addition, placement of the strap around the child’s neck could
result in asphyxiation.
•Do not attempt to disassemble or alter any part of the equipment that is
not expressly described in this guide. Disassembly or alteration may
result in high-voltage electrical shock. Internal inspections, alterations and
repairs should be conducted by qualified service personnel authorized by
your camera distributor or a Canon Customer Support Help Desk.
Storing SD cards
Store the SD memory card out of the reach of children and infants.
It may be swallowed accidentally. If this occurs, consult a doctor
immediately.
8
•To avoid the risk of high-voltage electrical shock, do not touch the flash
portion of the camera if it has been damaged. Similarly, never touch
internal portions of the equipment that become exposed as a result of
damage. There is a risk of high-voltage electrical shock. Please take the
first opportunity to consult your camera distributor or the closest Canon
Customer Support Help Desk.
•Stop operating the equipment immediately if it emits smoke or noxious
fumes. Failure to do so may result in fire or electrical shock. Immediately
turn the camera power off, remove the battery pack or unplug the battery
charger from the power outlet. Confirm that smoke or fume emissions
have ceased. Please consult your camera distributor or the closest Canon
Customer Support Help Desk.
•Stop operating the equipment if it is dropped or the casing is damaged.
Failure to do so may result in fire or mediately turn the electrical shock. Im
camera power off, remove the battery pack or unplug the power cable
from the power outlet. Please consult your camera distributor or the
closest Canon Customer Support Help Desk.
•Do not allow the equipment to come into contact with, or become
immersed in, water or other liquids. Do not allow liquids to enter the
interior. The camera has not been waterproofed. If the exterior comes into
contact with liquids or salt air, wipe it dry with a soft, absorbent cloth. If
water or other foreign substances enter the interior, immediately turn the
camera power off and remove the camera battery pack or unplug the
power cord from the power outlet. Continued use of the equipment may
result in fire or electrical shock. Please consult your camera distributor or
the closest Canon Customer Support Help Desk.
•Do not use substances containing alcohol, benzene, thinners or other
flammable substances to clean or maintain the equipment. The use of
these substances may lead to fire.
•Remove the power cord on a regular periodic basis and wipe away the
dust and dirt that collects on the plug, the exterior of the power outlet
and the surrounding area. In dusty, humid or greasy environments, the
dust that collects around the plug over long periods of time may become
saturated with humidity and short-circuit, leading to fire.
11
Cautions
•Avoid using, placing or storing the equipment in places subject to
strong sunlight or high temperatures, such as the dashboard or trunk
(boot) of a car. Exposure to intense sunlight and heat may cause the
batteries to leak, overheat or explode, resulting in fire, burns or other
injuries. High temperatures may also cause deformation of the casing.
Ensure that there is good ventilation when using the battery charger to
charge the battery pack.
•Do not store the equipment in humid or dusty areas. Storage in such
areas could lead to fire, electrical shock or other damage.
• Be careful not to bang the camera or subject it to strong impacts or
shocks that could lead to injury or damage the equipment when
wearing or holding it by the strap.
•Be careful not to cover the flash with your fingers or clothing when
shooting. The flash may be damaged and emit smoke or noise. In
addition, do not touch the surface of the flash after taking several pictures
in rapid succession. Either action could result in burns.
•Do not operate the flash with dirt, dust or other items stuck to its lens.
The resulting heat build-up could damage the flash.
•Ensure that the battery charger is plugged into a power outlet of the
specified rating, not over the specified rating. The plug of the battery
charger varies according to region.
• Do not use the battery charger or compact power adapter if the plug or
cable is damaged, or if the plug is not fully inserted into the power
outlet.
• Do not allow metal objects (such as pins or keys) or dirt to contact the
charger terminals or plug.
•If your camera is used for prolonged periods, the camera body may
become warm. Please take care when operating the camera for extended
periods as your hands may experience a burning sensation.
12
Preventing Malfunctions
Avoid Strong Magnetic Fields
Never place the camera in close proximity to electric motors or other
equipment generating strong electromagnetic fields. Exposure to strong
magnetic fields may cause malfunctions or corrupt image data.
Avoid Condensation Related Problems
Moving the equipment rapidly between hot and cold temperatures may
cause condensation (water droplets) to form on its external and internal
surfaces. You can avoid this by placing the equipment in an airtight,
resealable plastic bag and letting it adjust to temperature changes slowly
before removing it from the bag.
If Condensation Forms Inside the Camera
Stop using the camera immediately if you detect condensation. Continued
use may damage the equipment. Remove the SD card and battery pack or
compact power adapter from the camera and wait until the moisture
evaporates completely before resuming use.
Extended Storage
When not using the camera for extended periods of time, remove the
battery pack from the camera or battery charger and store the equipment in
a safe place. Storing the camera for extended periods with a battery pack
installed will run down the battery pack. However the date, time and other
camera settings may reset to default settings if the battery pack has been
removed for more than three weeks.
13
Components Guide
Components Guide
Front View
* When carrying the camera by the strap, be careful not to swing the camera
or catch it on other items.
AF-assist Beam (p. 47)
Red-Eye Reduction Lamp (p. 67)
Self-timer Lamp (p. 78)
Flash (p. 66)
Lens
Microphone (p. 124)
Wrist Strap Mount
Viewfinder Window (p. 44)
DIGITAL Terminal (p. 147)
A/V OUT (Audio/Video output) Terminal (p. 155)
Terminal Cover
The interface cable and AV cable cannot be connected simultaneously.
Attaching the Wrist Strap*
How to Open the Terminal Cover
You can use this toggle to open the terminal
cover or SD card slot/battery cover.
14
Back View
LCD Monitor (p. 37)
Tripod Socket
SD Card Slot/
Battery Cover (pp. 21, 23)
Battery Compartment
(SD card/battery
compartment)
Viewfinder Window (p. 44)
DC Coupler Terminal Cover (p. 169)
Speaker
Never rub or press strongly on the LCD monitor. These actions may
damage it or lead to other problems.
15
Components Guide
Operation Panel
Power Button (p. 34)
Shutter Button (p. 46)
(Metering)
Button
(p. 94)
/
(Jump) Button
(p. 117)
/
Button
(Flash) Button (p. 66)/
Button
(Single Image Erase) Button
(p. 131)/
(Continuous) Button
(p. 75)/
(Self-timer)
Button (p. 78)/
Button
Mode Switch (p. 36)
(Macro) / (Infinity) Button
(p. 71)/
Button
FUNC./SET (Function/Set) Button
(p. 48)
MENU Button (p. 50)
Indicators (p. 16)
(Print/Share)
Button (p. 17)
Power Lamp
Lights when the power is on or transmission
preparations are complete when connected to a
computer
Zoom Lever
Shooting:
(Wide Angle)/ (Telephoto) (p. 45)
Playback:
(Index) (p. 115)/ (Magnify) (p. 114)
DISP. (Display) Button (p. 37)
17
Components Guide
The following operations are accessible through one easy press of
the (Print/Share) button.
• Printing: See the Direct Print User Guide (supplied with the camera)
• Downloading images: See p.145 of this guide and the Canon Digital
Camera Software Starter Guide Disk (supplied with the camera)
The indicator blinks or lights during a printer or computer connection.
Blue: Ready to print/Ready to transfer images
Blinking blue: Printing/Transferring
The following cables are used to connect the camera to a computer
or printer.
Computer (p. 145)
Interface Cable IFC-400PCU (supplied with the camera)
Direct Print Compatible Printers (Sold Separately)
•Compact Photo Printer (SELPHY CP series)/Card Photo Printer
Interface Cable IFC-400PCU (supplied with the camera) or the
Direct
Interface Cable DIF-100 (supplied with the printer).
• Bubble Jet Printers (PIXMA series/SELPHY DS series)
-PictBridge Compliant Printers:
Interface Cable IFC-400PCU (supplied with the camera)
-Bubble Jet Direct Compatible Printers:
Please refer to your Bubble Jet printer user guide.
•PictBridge Compliant Non-Canon Printers
Interface Cable IFC-400PCU (supplied with the camera)
Please refer to the System Map or the Direct Print User Guide supplied
with the camera for direct print compatible printer information
.
18
Preparing the Camera
Charging the Battery Pack
Use the following procedures to charge the battery pack the first time you
use the camera or when the “Change the battery pack” message displays.
To protect the battery pack and prolong its life, do not charge it for
longer than 24 hours continuously.
1Insert the battery pack into the
battery charger.
Align the on the battery pack and
battery charger and insert it correctly.
2Battery charger model names and types
vary by region.
(For CB-2LV)
Plug the battery charger into a
power outlet.
(For CB-2LVE)
Attach the power cord to the battery
charger and plug it into a power
outlet.
• The charge indicator will light orange
while the battery pack is charging. It will
change to green when the charge is
complete.
• After charging, unplug the battery charger
and immediately remove the battery pack.
Symbol
Charge Indicator
19
Preparing the Camera
• Since this is a lithium-ion battery pack, you need not completely
discharge it before recharging. It can be recharged at any point.
However, since the maximum number of charge cycles is
approximately 300 times (battery life based on Canon’s testing
standards), you are recommended to charge the battery pack after
having discharged it completely to prolong battery life.
• It takes approximately 90 minutes to fully charge the battery pack
from a fully discharged state (based on Canon’s testing standards).
Charging it within a temperature range of 5° to 40 °C (41° to 104 °F)
is recommended.
• Charge times may vary according to the ambient temperature and
the battery pack’s charge state.
• You may hear a noise during charging. This is not a malfunction.
• See Battery Capacity (Battery Pack NB-4L (Fully charged)) (p. 177).
Battery Pack Handling Precautions
zKeep the battery pack terminals ( ) clean at all times. Dirty
terminals may cause poor contact between the battery pack and camera.
Polish the terminals with a soft cotton swab before charging or using the
battery pack.
zDo not rapidly overturn or wave the battery charger around when it
contains the battery pack. The battery pack could fly out.
zAt low temperatures, battery pack performance may be reduced and the
low battery icon may appear earlier than usual. Under these conditions,
resuscitate the battery pack by warming it in a pocket immediately before
use. However, ensure that there are no metallic items in the pocket that
could cause a short circuit, such as a key holder, etc.
zDo not place anything, such as tablecloths, carpets, bedding or cushions,
on top of the battery charger while it is charging. Heat will build up and
could result in a fire.
zDo not charge batteries other than Battery Pack NB-4L in this charger.
zThe battery pack continues to discharge a minimal portion of its power
while installed in the camera, even with the power off, or in the charger.
This will shorten battery life.
21
Preparing the Camera
Installing the Battery Pack
Install Battery Pack NB-4L (supplied).
Please recharge the battery pack (p. 18)
before you use it for the
first time.
1Slide the SD card slot/battery cover
in the direction of the arrows.
2Press the battery lock while
inserting the battery pack all the
way in until the lock clicks.
Align the on the battery pack and
battery chamber and insert it correctly.
To remove the battery pack, press the
battery lock in the direction of the arrow and
hold it while pulling the battery pack out.
3Slide the SD card slot/battery cover
closed.
1
2
Battery Lock Symbol
1
2
23
Preparing the Camera
Installing the SD Card
Write-Protect Tab
The SD card has a write-protect tab. Sliding the tab downward prevents
recording of data and protects existing data (e.g. images). When recording
to, erasing from or formatting the SD card, slide the tab upward.
Turn the camera power off and insert the SD card with the following
procedures.
1Slide the SD card slot/battery cover
in the direction of the arrows.
2Insert the SD card.
• Push it in with your finger or the toggle on
the wrist strap, as illustrated on the
camera bottom, until it clicks into place.
• Do not touch or allow metal objects to
contact the terminals on the back of the
SD card.
Writing/Erasing Possible Writing/Erasing Impossible
Write-Protect Tab
Ensure that the SD card is correctly oriented before inserting it in the
camera. It may damage the camera if inserted backward by mistake.
1
2
Front
24
To Remove the SD card
Push the SD card with your finger or the toggle on the wrist strap until it
clicks and then release it.
• Please watch the loading slot area carefully as you insert and
remove the SD card.
• Since the camera is writing, reading, erasing or transmitting data to
or from the SD card when the indicator blinks green, never perform
the following actions during this time. It could corrupt the image
data.
- Subject the camera body to vibration or shocks.
- Turn the camera’s power off, or open the SD card slot/battery
cover.
• Please note that SD cards formatted with other manufacturers’
cameras or a computer, or formatted or edited with application
programs, may slow down writing to the SD card or may not operate
correctly in the camera.
• You are recommended to use SD cards that have been formatted in
your camera (p. 25). The card supplied with the camera may be
used without further formatting.
See SD Cards and Estimated Capacities (p. 178).
3Slide the SD card slot/battery cover
closed.
2
1
25
Preparing the Camera
Formatting SD Cards
You should always format a new SD card or one from which you wish to
erase all images and other data.
Please note that formatting (initializing) an SD card erases all data,
including protected images and other file types.
1Press the power button until the
power lamp lights green.
2Press the MENU button.
The (Rec.) or (Play) menu is
displayed.
3Use the button to select the
(Set up) menu.
4Use the or button to select
[Format] and press the FUNC./SET
button.
Power Lamp
26
•Low Level Format
You should select the [Low Level Format] option if you suspect the
read/write speed of an SD card has dropped or if you wish to
completely erase its data. A low level format may require 2 to
3 minutes with some SD cards.
• When the camera is malfunctioning, a corrupted SD card might be
the cause. Reformatting the SD card may solve the problem.
• When a non-Canon brand SD card is malfunctioning, reformatting it
may solve the problem.
• SD cards formatted in other cameras, computers, or peripheral
devices may not operate correctly in this camera. When that
happens, reformat the SD card with this camera. If formatting in the
camera does not work properly, turn the camera off and re-insert the
SD card. Then turn the camera back on and format again.
5Use the button to select [OK] and
press the FUNC./SET button.
• To perform a low level format, use the
button to select [Low Level Format] and
the or button to add a check mark.
• To exit instead of formatting, select
[Cancel].
• If [Low Level Format] is selected, you can
stop formatting partway by pressing the
FUNC./SET button. You can still use the
SD card without problem even if
formatting was halted partway.
• The capacity of the SD card displayed after
formatting will be less than the rated
capacity of the SD card. This is not a
malfunction of the SD card or camera.
27
Preparing the Camera
SD Card Handling Precautions
zSD cards are high-precision electronic devices. Do not bend them, apply
force to them, or subject them to shocks or vibration.
zDo not attempt to disassemble or alter the SD card.
zDo not allow dirt, water or foreign objects to contact the terminals on the
back of the card. Do not touch the terminals with your hands or metal
objects.
zDo not peel away the original label on the SD card or cover it with another
label or sticker.
zWhen writing on the SD card, use a soft point pen (e.g. felt-tip pen). Using
a sharp point pen (e.g. ball-point pen) or pencil may damage the SD card or
corrupt the recorded data.
zSince some or all of the data recorded on the SD card may be corrupted or
erased by electrical noise, static electricity or card malfunction, making a
backup copy of important data is recommended.
zMoving an SD card rapidly between temperature extremes will cause
condensation to form in the card and lead to a malfunction. To avoid
condensation, place the SD card in a sealed plastic bag before moving it
into a different temperature zone and allow it to adjust slowly to the new
temperature.
zIf condensation forms on the SD card, store it at room temperature until the
water droplets have evaporated naturally.
zDo not use or store SD cards in the following locations.
- Locations subject to dust or sand
- Locations subject to high humidity and high temperatures
Precaution for Multi Media Cards
This camera is designed to perform optimally when used with genuine
Canon-brand SD cards. You may use multi media cards with this
camera. However, Canon makes no warranties concerning the use of
multi media cards.
28
Setting the Date and Time
The Date/Time menu will appear the first time the camera power is turned
on or whenever the built-in rechargeable lithium-ion date/time battery
charge is low. Start from Step 5 to set the date and time.
1Press the power button until the
power lamp lights green.
2Press the MENU button.
The (Rec.) or (Play) menu is
displayed.
3Use the button to select the
(Set up) menu.
4Use the or button to select
[Date/Time] and press the FUNC./
SET button.
Power Lamp
29
Preparing the Camera
• Please note that the date and time settings may be lost if the camera
battery has been removed for more than three weeks. Reset them
when this occurs.
• For embedding the date on the image data, refer to page 77.
• To set the camera so that the date and time will not appear on
the image when it is being shot but only when it is printed, see
Setting the Print Style (p. 140), the Direct Printer User Guide or
the Canon Digital Camera Software Starter Guide Disk supplied
with the camera.
Charging the Date/Time Battery
- The camera has a built-in rechargeable lithium-ion battery for
saving settings such as the date and time. This battery is
recharged by the battery pack while it is in the camera. Right after
purchasing the camera, leave a charged battery pack in the
camera, or plug in AC Adapter Kit ACK-DC10 (sold separately),
for about 4 hours to charge the date/time battery. It will charge
even when the camera power is turned off.
- If the Date/Time menu appears when the camera power is turned
on, the date/time battery charge is low. Use the above method to
recharge it.
5Set the date and time.
• Use the or button to select a field
(year, month, day, hour, minute and date
format).
• Use the or button to change its
value.
• The date can be set up to the year 2037.
6Press the FUNC./SET button.
The setting is complete.
7Press the MENU button.
The display will return to the shooting or
playback screen.
30
Using the Clock
You can display the current date and time for
a 5-second* interval using the following
methods. This is convenient for confirming
the shooting date and time.
* Default setting
• Holding the FUNC./SET Button While Pressing the Power Button
-The start-up image will not display at startup, also the start-up sound
will not play.
-The Date/Time menu will display if the time has not been set.
-The Display Off function will not work while the clock display is on.
• Pressing and Holding the FUNC./SET Button in Shooting Mode
The clock display will differ according to the camera orientation.
-Camera held horizontally: only the time displays
-Camera held vertically: both the time and date display
While the clock display is on, you can
change the display color by pressing the
or button or by firmly holding and
gently shaking the camera as shown in
the illustration. Feel free to change to
your preferred color.
The clock display will cease when the display interval is over or when you
operate any one of the FUNC./SET, MENU or Shutter buttons or the
mode switch.
• The clock cannot be displayed when menus are displayed with the
MENU button.
• The clock’s display interval can be changed in the (Set up) menu (p. 56).
32
You can display the Language menu directly by holding down the
FUNC./SET button and pressing the MENU button while in single
image playback or index playback mode.
5Use the , , or button to
select a language and press the
FUNC./SET button.
6Press the MENU button.
The display will return to the shooting or
playback screen.
33
Preparing the Camera
34
Basic Functions
Turning the Power On
To Turn the Power Off
Press the power button again.
• If the “Card locked!” message appears right after the power is
turned on, the SD card cannot record (p. 23).
• The Date/Time menu will appear the first time the camera power is
turned on or whenever the built-in rechargeable lithium-ion battery
charge is low. Reset the date and time when this occurs (p. 28).
• If the power saving function activates, press the power button to
restore power.
• You will hear a start-up sound and see the start-up image when the
power is turned on. To change the start-up sound and image, see
pp. 55, 58, 157.
• The start-up image does not display when the camera is connected
to a TV via the A/V OUT terminal.
Turning On the Power without the Start-Up Sound
Hold the MENU button while pressing the power button. This will set the
[Mute] setting to [On] and silence the operation sound and the shutter
sound. This is convenient when you wish to shoot silently.
Press the power button until the
indicator lights green.
The lens extends when the mode switch is
set to or .
Power Lamp
36
Switching Between Shooting/Playback
The mode switch is used to select Shooting and Playback modes.
When a printer is properly connected, the , or icon
appears on the LCD monitor.
To Shoot Still Images (Shooting Mode)
Slide the mode switch to .
To Shoot Movies (Movie Mode)
Slide the mode switch to .
To Play Back Images (Playback Mode)
Slide the mode switch to .
• The lens retracts approximately 1 minute after
changing the mode switch position from or
to .
• When a printer is connected, images can be
printed (see the Direct Print User Guide).
• When a camera is connected, recorded images
can be downloaded to and viewed with a computer
(p. 154).
37
Basic Functions
Using the LCD Monitor
The LCD monitor can be used to compose images while shooting, adjust
menu settings and play back recorded images. Icons showing the camera’s
status and setting contents appear on the LCD monitor.
The image in the LCD monitor will darken in strong sunlight or bright
light. This does not constitute a malfunction.
Shooting Mode ( , ) (p. 41)
• The LCD monitor setting (On or Off) is saved by the camera when
the power is turned off so that the same setting is automatically
available when the power is turned on again. However, the setting
may be lost when the power has been turned off after the “Change
the battery pack” message has displayed, while the LCD monitor
was on in Shooting mode.
• The LCD monitor does not shut off in the , , or
mode.
Press the DISP. button.
The display mode changes as follows with
each press.
Standard (No Information)
Detailed (Information View)
Off
38
Playback Mode ( ) (p. 42)
When the mode switch is set to , the LCD monitor will turn on.
In index playback mode (p. 115), the detailed display is not available.
Press the DISP. button.
The display mode changes as follows with
each press.
Standard
Detailed
No Information
39
Basic Functions
LCD Monitor Brightness
The brightness of the LCD monitor can be adjusted to better suit the
shooting conditions. When shooting in dark conditions, the camera will also
automatically brighten the LCD monitor.
LCD Monitor Brightness Settings
The brightness of the LCD monitor can be changed in the following two
ways.
• Changing Settings Using the Set up Menu (p. 55)
• Changing Settings Using the DISP. Button (Quick-bright LCD Function)
Pressing the DISP. button for at least 1 second switches the brightness to
the highest setting. Pressing it again for at least 1 second restores it to the
original setting.
If you set the brightness to the highest setting using this method and
turn the camera power off, the brightness setting will revert to the value
set in the Set up menu.
Night Display
When shooting in dark conditions, the camera automatically brightens the
LCD monitor to suit the brightness of the subject*, making it easier to frame
the subject.
* Noise will appear, and the movements of the subject will appear irregular in the LCD
monitor. The brightness of the image displayed in the monitor, and the brightness of the
actual image recorded will be different.
41
Basic Functions
* Appears even if the LCD monitor is set to Standard (No Information).
Zoom powers indicate the combined optical and digital amount of zoom.
These figures appear when the digital zoom is activated.
Exposure Compensation (p. 95)
Long Shutter Mode (p. 96)
White Balance (p. 98)
ISO Speed (p. 109)
Photo Effect (p. 101)
Compression (p. 64)
Resolution (pp. 64,
65)
Low Battery (p. 22)
Metering Mode (p. 94)
Shooting Method (pp. 75, 78)
Flash (p. 66)
Shooting Mode (pp. 68, 81)
Movie Recording (p. 81)
Camera Shake Warning (p. 40)
Spot AE Point Frame ( Mode)
AF Frame (p. 89)
• Stills: Recordable Shots
• Movies (Sec.):
-Recordable Time
-Recorded Time
Zoom Magnification* (p. 45)
*
(Red)*
*
*
Auto Rotate (p. 110)
*
*
Macro/Infinity (p. 71)
AE Lock (p. 92)
FE Lock (p. 93)
AF Lock (p. 90)
*
*
*
Frame Rate (Movie) (pp. 65, 85)
* *
My Colors
(p. 102)
*
44
Using the Viewfinder
The viewfinder can be used to conserve power by turning the LCD monitor
off (p. 37) while shooting.
Image Seen in Viewfinder vs. Recorded Image
Usually the recorded image contains more of the scene than is seen in
the viewfinder. Confirm the actual image size with the LCD monitor.
The image recorded may differ from what is seen in the viewfinder due
to the distance between the viewfinder and lens (especially with
close-ups). If you use the viewfinder to take close-up shots, portions of
the close-up subject may not appear in the recorded image. Use the
LCD monitor when taking close-up shots (p. 71).
Shows the center of the image
Viewfinder
About the Autofocus Function
This camera employs AiAF (artificial intelligence autofocus) technology
which uses a broad metering field to calculate the focal distance with
high precision. It delivers a crisp focus even when the photographic
subject is slightly off-center.
The AiAF function can be turned off so that the autofocus is metered from
a fixed AF frame at the center of the field (p. 89).
46
Pressing the Shutter Button
The shutter button features a two-stage action.
1. Pressing Halfway
Automatically sets such settings as the exposure and focus.
Press the shutter button halfway.
zBeep
• Focused: 2 beeps
• Focusing difficulty: 1 beep
zIndicator Status
Upper Indicator
• Green: Metering complete
• Orange: Flash will fire
• Blinking Orange: Camera shake warning/
Insufficient exposure
Lower Indicator
• Yellow: Macro mode/Infinity
mode/AF lock (p. 71,
90)
• Blinking Yellow: Focusing difficulty
*
* Use the focus lock or AF lock to shoot when the
indicator blinks yellow (p. 90).
zAF Frame Status (LCD Monitor On)
AiAF On (p. 89)
• Green Frame: Metering complete
(focused AF frame)
• No Frame: Focusing difficulty
AiAF Off (p. 89) (Center AF Frame)
• Green Frame: Metering complete
• Yellow Frame: Focusing difficulty
Indicators
47
Basic Functions
2. Pressing Fully
Pressing the shutter button down fully activates the shutter and causes the
shutter sound to play.
Shots cannot be taken while the flash is charging.
AF-assist Beam
• The AF-assist Beam will sometimes emit when the shutter button is
pressed halfway to assist focusing in certain conditions, e.g., dark
conditions.
• The AF-assist Beam can be turned off (p. 53).
For example, if animals are your subject, turn off the beam when
shooting in the dark to avoid startling them.
However, please keep in mind the following facts.
- Turning the AF-assist Beam off or shooting in dark places may
make it more difficult for the camera to focus.
- The red-eye reduction lamp may emit when the flash is set to ,
or even if the AF-assist Beam is turned off.
Press the shutter button fully.
While the image is being recorded to the SD
card, the indicator blinks green.
48
Selecting Menus and Settings
Menus are used to adjust shooting and playback settings, as well as other
camera settings like the Date/Time and sounds. Menus are displayed by
pressing the FUNC./SET or MENU button according to the circumstances.
Use the following procedures to select settings.
Some menu options may not be selectable in certain shooting modes
(p. 192).
Selecting Menu Settings with the FUNC./SET Button
(Shooting Mode only)
1
Slide the mode switch to
(Shooting) or (Movie).
2Press the FUNC./SET button.
3Use the or button to select an
item.
Please see the FUNC. Menu topic on the
next page for the selectable menu items.
4Use the or button to select an
option.
• Some menu items allow you to make
further settings by pressing the MENU
button.
• You can shoot right after performing these
steps. The menu displays again after the
shot, allowing you to change the settings
easily.
5Press the FUNC./SET button.
49
Basic Functions
FUNC. Menu
( )
Shooting Mode (p. 68)
( )
Photo Effect (p. 101)
( )
Movie Mode (p. 81)
( )
My Colors (p. 102)
( )
Exposure Compensation (p. 95)
( )
Compression
(p. 64)
( ) Long Shutter Mode (p. 96)
( )
Frame Rate (p. 85)
( )
White Balance (p. 98)
( )
Resolution
(p. 64)
( )
ISO Speed
(p. 109)
( )
Resolution (Movie)
(p. 65)
( ) Items in parentheses show default settings.
51
Basic Functions
6Press the MENU button.
• The menu will close.
• In Shooting mode, the menu can be
closed by pressing the shutter button
halfway.
53
Basic Functions
Menu Settings and Factory Defaults
This chart shows the options and default settings for each menu.
* Default setting
Rec. Menu
Menu Item Options
Reference
Page
AiAF
Sets whether or not the camera automatically
selects the AF frame or a fixed center AF frame.
• On*
• Off
p. 89
Self-timer
Sets the duration of the self-timer delay.
• 10 seconds*
• 2 seconds
• Custom Timer
Delay: 0-10*, 15, 20, 30 sec.
Shots: 1-10 (3*)
p. 78
AF-assist Beam
Sets the AF-assist Beam to on or off.
• On*
• Off
p. 47
Digital Zoom
Sets the digital zoom to on or off.
It can be set to [On] or [Off] for a movie in
standard mode, but the default setting is [On].
• On
• Off*
p. 74
Review
Sets the duration images display on the LCD
monitor after the shutter button releases.
• Off
• 2* to 10 seconds
• Hold
p. 62
Date Stamp
Sets the date stamp for postcard prints with
embedded date stamps.
• Off*
• Date
• Date & Time
p. 77
Save Original
Sets whether or not to save the original image
(normal image) when shooting in a My Colors mode.
• On
• Off*
p. 104
54
Long Shutter
Sets the shutter speed to slow settings.
• On
• Off*
p. 96
Stitch Assist
Images are shot in overlapping series to create
single panoramic images.
• Left to right*
• Right to left
p. 86
Play Menu
Menu Item Options
Reference
Page
Protect Protects images from accidental erasure. p. 130
Rotate
Rotates images clockwise 90° or 270° in the
display.
p. 123
Sound Memo Adds sound memos to images. p. 124
Erase all Deletes all images from an SD card
(except for protected images). p. 132
Slide Show Plays images automatically one after the other. p. 126
Print Order
Selects images and the number of print copies
for output to a direct print compatible printer
or photo developing service.
p. 136
Transfer Order Specifies settings for images before
downloading to a computer. p. 142
Menu Item Options
Reference
Page
58
You can select the start-up image and sound, operation sound, self-timer
sound and shutter sound used on this camera.
These are called the My Camera settings. You can also customize the
and options for each item with images recorded on the SD card and
newly recorded sounds or by using the supplied software.
See the Canon Digital Camera Software Starter Guide Disk for details.
• How the [Mute] Option in the (Set up) Menu and Sounds in the
(My Camera) Menu Interact
To turn off each sound, such as the start-up sound, shutter sound,
operation sound and self-timer sound, [Mute] must first be set to [On] in
the (Set up) menu. When [Mute] is set to [On], each sound option will
not play even if they are set individually to [On]. The warning sound,
however, will play even when [Mute] is set to [On].
My Camera Menu
Menu Item Available Settings
Reference
Page
Theme Selects a common theme for each My
Camera settings item.
p. 157
Start-up Image Sets the image displayed when the
camera power is turned on.
Start-up Sound Sets the sound played when the camera
power is turned on.
Operation Sound Sets the sound played when any button
other than the shutter button is pressed.
Selftimer Sound Sets the sound played 2 seconds before
the shutter releases in self-timer mode.
Shutter Sound
Sets the sound played when the shutter
button is pressed. There is no shutter
sound for movies.
My Camera Menu Contents
• (Off) • *
• •
62
• See Functions Available in Each Shooting Mode (p. 192).
• With the Review function, you can change the length of time images
show on the LCD monitor after shooting, or set it so they do not show
at all (p. 62).
Reviewing an Image Right After Shooting
Right after a shot is taken, the image appears in the LCD monitor for 2
seconds. In addition, the images will keep on displaying regardless of the
review duration setting if one of the following operations is performed.
• Keeping the shutter button pressed after a shot.
• Pressing the FUNC./SET button while the image is displayed on the LCD
monitor (except in mode).
Press the shutter button halfway to stop displaying it so that you can shoot the
next frame.
• You can do the following while the image is displayed (except in
mode).
- Display the image’s information (p. 40).
- Erase the image (p. 131).
- Display the magnified image (p. 114).
(when the image is displayed with the FUNC./SET button or the Hold option
has been selected)
6
Press the shutter button fully (p. 47).
• You will hear the sound of the shutter
when the shutter activates.
• The picture appears for two seconds on
the LCD monitor.
Shooting Mode

Termékspecifikációk

Márka: Canon
Kategória: kamera
Modell: IXUS 50

Szüksége van segítségre?

Ha segítségre van szüksége Canon IXUS 50, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók kamera Canon

Canon

Canon WFT-E9 Útmutató

14 Január 2025
Canon

Canon PowerShot PX Útmutató

15 December 2024
Canon

Canon EOS R10 Útmutató

3 Október 2024
Canon

Canon WFT-E1A Útmutató

1 Szeptember 2024
Canon

Canon WFT-E2A Útmutató

1 Szeptember 2024
Canon

Canon Power Zoom Adapter PZ-E2 Útmutató

31 Augusztus 2024
Canon

Canon EOS 100 Útmutató

31 Augusztus 2024
Canon

Canon WP-DC47 Útmutató

26 Augusztus 2024
Canon

Canon WP-DC41 Útmutató

25 Augusztus 2024
Canon

Canon WP-DC51 Útmutató

25 Augusztus 2024

Útmutatók kamera

Legújabb útmutatók kamera

Maginon

Maginon WK-7 HD Útmutató

1 Április 2025
Rollei

Rollei HD-30 Útmutató

29 Március 2025
Rollei

Rollei Security Cam 1080p Útmutató

29 Március 2025
Hasselblad

Hasselblad CFV II 50c Útmutató

28 Március 2025
Syrp

Syrp Magic Carpet PRO Útmutató

27 Március 2025
Aida

Aida HD-NDI-X20 Útmutató

27 Március 2025
Panasonic

Panasonic Lumix DC-TZ91 Útmutató

20 Március 2025
Fujifilm

Fujifilm FinePix JX500 Útmutató

14 Január 2025
Mamiya

Mamiya C330 Útmutató

12 Január 2025
Pentax

Pentax Optio S40 Útmutató

12 Január 2025