Használati útmutató Buffalo LinkStation Pro

Buffalo szerver LinkStation Pro

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Buffalo LinkStation Pro (1 oldal) a szerver kategóriában. Ezt az útmutatót 3 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/1
Media Server Update Procedure
LinkStation with firmware 1.20 or later
Connect the LinkStation to the Internet.
Turn the LinkStation off, then turn it back on.
The LinkStation will update the media server automatically.
Alternativ, you may update the media server manually.
From a computer connected to the same network as the LinkStation, open the LinkStation's
web-based administation interface.
Navigate to [Extensions]-[Media Server] and click [Update DTCP-IP].
The LinkStation will update the media server.
DTCP-IP functionality update: Release Notes
Release data: 2010/12/06(Mon)
DTCP-IP version: DTCP-IP_1.40-20101129
--------------------------------------------------------
[Firmware Release Note]
Media Server Update Ver.1.40 (DTCP-IP:1.40-20101129)
- Media Server problems fixed: Movies recorded by HDV or AVCHD Camcorders are now
available to be viewed with some playback devices.
--------------------------------------------------------

Termékspecifikációk

Márka: Buffalo
Kategória: szerver
Modell: LinkStation Pro

Szüksége van segítségre?

Ha segítségre van szüksége Buffalo LinkStation Pro, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók szerver Buffalo

Útmutatók szerver

Legújabb útmutatók szerver