Használati útmutató Brivis Buffalo BX320C

Brivis Fűtő Buffalo BX320C

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Brivis Buffalo BX320C (36 oldal) a Fűtő kategóriában. Ezt az útmutatót 5 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF

Oldal 1/36

Ducted Gas Heater

Operation Manual

Brivis Models:

StarPro SP6, SP5, SP4

Bualo BX5, BX3C

Wombat 2PWN

Compact CC3

BX5 BX3C

SP623EN

SP521IN

Brivis 2 Ducted Gas Heater OM

This appliance must be installed in accordance with:

• Manufacturer’s Installation Instructions

• Current AS/NZS 3000, AS/NZS 5601, AS/NZS 5141

• AS 4254, HB 276-2004

• Local Regulations and Municipal Building Codes

including local OH&S requirements

This appliance must be installed, maintained and removed

only by an Authorised Person.

For continued safety of this appliance it must be installed

and maintained in accordance with the manufacturer’s

instructions.

All Rinnai gas products sold in

Australia are A.G.A. certified.

Brivis 3 Ducted Gas Heater OM

Table of Contents

Warnings and Important Information 5

1.1 How Does Ducted Heating Work? .................................................................................................................. 7

1.2 Efficiency ......................................................................................................................................................... 7

1.3 Safety Warnings .............................................................................................................................................. 8

1.4 Supply Cord .................................................................................................................................................... 8

1.5 Notes on Heater Operation ............................................................................................................................. 8

1.6 Power Supply Interruption ............................................................................................................................... 8

1.7 Switch the System On ..................................................................................................................................... 8

2. Outlet Guide 9

3. Networker Wall Control Unit 12

4. Zoned Systems 13

4.1 Zoning Symbols ............................................................................................................................................ 13

5. Time and Day Settings 13

5.1 Set Time and Day ......................................................................................................................................... 13

6. User Settings 14

6.1 NC-6 User Settings in Heating Operation Display ........................................................................................ 14

7. Programmed (AUTO) Operation 15

7.1 Operate the System in AUTO Mode ............................................................................................................. 15

7.2 Temporarily Override the AUTO Mode Settings ........................................................................................... 15

7.3 Skip a Programmed Heating Period ............................................................................................................. 16

7.4 Permanently Change the AUTO Mode Settings ........................................................................................... 16

8. Manual Operation 17

8.1 Operate the System with Manual Settings .................................................................................................... 17

9. Special Fan Operations 18

9.1 Fan Only Operation ....................................................................................................................................... 18

9.2 Continuous Fan Operation – Networker On ................................................................................................. 18

10. System Messages 18

10.1 Read Messages ............................................................................................................................................ 18

10.2 Clear the Spanner Icon ................................................................................................................................. 18

11. Error Codes 19

12. Reset the Heater 20