Használati útmutató BMI 08012
                    BMI
                    
                    zuhanyrendszer
                    
                    08012
                
                                
                
                
                                
                Olvassa el alább 📖 a magyar nyelvű használati útmutatót BMI 08012 (1 oldal) a zuhanyrendszer kategóriában. Ezt az útmutatót 21 ember találta hasznosnak és 11 felhasználó értékelte átlagosan 5.0 csillagra
                        Oldal 1/1
                    
                    
                    
INSTALLATION INSTRUCTIONS
Montreal  ~  Vancouver ~ Toronto ~  Cincinnati
1-800-561-85791-800-361-1452
www.bmicanada.com
#08012  stainless steel grid Caulk PVC shower drain with 
Shower Floor
Compression
Ring
Rubber
Donut
Subfloor Locknut
Body
Rubber Gasket
Paper Gasket
2" DWV
PVC or ABS Pipe
Stainless Steel Grid
Grid
Tool Plate
Compression Ring
Body
Rubber Donut
Rubber Gasket
Paper Gasket
Locknut
Warning:
- The pipe must be cut straight and clean.
- Overtightening could cause the plastic to break.
Note: Watertight installation of the drain is
the installer’s responsability. Damages 
caused by drain leakage are excluded from
the limited warranty of the product.
Shower floor
Installation steps:
1. Remove the ‘Grid’, the ‘Compression Ring’ & ‘Rubber Donut’
    from the top. Then remove the locknut & both gaskets from the bottom.
2. Install the ‘Body’ in the Shower floor opening.
3. Install the ‘Rubber Gasket’, then ‘Paper Gasket’ and the ‘Locknut,
    under the shower floor, then tighten by hand first and complete
    with a basket strainer wrench.
4. Install the shower over the drain pipe. Mark & cut the pipe if necessary.
5. Slide the ‘Rubber Donut’ into the ‘Drain Body’ and slip it over the pipe. 
    Use vegetal lubricant or soap if necessary. Make sure that the beveled 
    end of the ‘Rubber Donut’ is facing up and that the top is flush with the 
    pipe or slightly lower.
6. Tighten the ‘Compression Ring’ into the ‘Drain Body’ with a screwdriver
    using the provided ‘Tool Plate’.
7. Remove and recycle the ‘Tool Plate’. 
8. Snap the ‘Grid’ back in place.
Termékspecifikációk
| Márka: | BMI | 
| Kategória: | zuhanyrendszer | 
| Modell: | 08012 | 
Szüksége van segítségre?
Ha segítségre van szüksége BMI 08012, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók zuhanyrendszer BMI
                        
                         21 Augusztus 2024
                        
                    
                                                            Útmutatók zuhanyrendszer
- zuhanyrendszer ECOstyle
 - zuhanyrendszer Rogerseller
 - zuhanyrendszer Belanger
 - zuhanyrendszer Sani-Lav
 - zuhanyrendszer Graff
 - zuhanyrendszer Ikea
 - zuhanyrendszer Schütte
 - zuhanyrendszer Miomare
 - zuhanyrendszer Haws
 - zuhanyrendszer Juno
 - zuhanyrendszer Panasonic
 - zuhanyrendszer Fieldmann
 - zuhanyrendszer Hozelock
 - zuhanyrendszer Gustavsberg
 - zuhanyrendszer Brizo
 
Legújabb útmutatók zuhanyrendszer
                        
                         3 Április 2025
                        
                    
                                                            
                        
                         3 Április 2025
                        
                    
                                                            
                        
                         2 Április 2025
                        
                    
                                                            
                        
                         1 Április 2025
                        
                    
                                                            
                        
                         30 Március 2025
                        
                    
                                                            
                        
                         29 Március 2025
                        
                    
                                                            
                        
                         31 December 2025
                        
                    
                                                            
                        
                         20 December 2024
                        
                    
                                                            
                        
                         14 December 2024
                        
                    
                                                            
                        
                         12 December 2024