Használati útmutató Black & Decker CD70CKA
Black & Decker
Boormachine
CD70CKA
Olvassa el alább 📖 a magyar nyelvű használati útmutatót Black & Decker CD70CKA (8 oldal) a Boormachine kategóriában. Ezt az útmutatót 6 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra
Oldal 1/8
1
UK
Ireland
Australia
New Zealand
www.blackanddecker.co.uk
13
2
5
6 4
2
D
C
BA
E
5 7
9
8
10
12 11
3
21
3
Intended use
Your Black & Decker hammer drill has been designed for drilling
in wood, metal, plastics, and masonry as well as for screwdriving
purposes. This tool is intended for consumer use only.
General safety rules
Warning! Read all instructions. Failure to follow all instructions
listed below may result in electric shock, fire and/or serious
injury. The term “power tool” in all of the warnings listed
below refers to your mains operated (corded) power tool or
battery operated (cordless) power tool.
SAVE THESE INSTRUCTIONS.
1. Work area
a. Keep work area clean and well lit. Cluttered and dark
areas invite accidents.
b. Do not operate power tools in explosive atmospheres,
such as in the presence of flammable liquids, gases
or dust. Power tools create sparks which may ignite the
dust or fumes.
c. Keep children and bystanders away while
operating a power tool. Distractions can cause you to
lose control.
2. Electrical safety
a. Power tool plugs must match the outlet. Never modify
the plug in any way. Do not use any adapter plugs
with earthed (grounded) power tools. Unmodified
plugs and matching outlets will reduce risk of electric shock.
b. Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric shock
if your body is earthed or grounded.
c. Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of
electric shock.
d. Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords increase the
risk of electric shock.
e. When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of a cord
suitable for outdoor use reduces the risk of electric shock.
3. Personal safety
a. Stay alert, watch what you are doing and use common
sense when operating a power tool. Do not use a
power tool while you are tired or under the influence
of drugs, alcohol or medication. A moment of
inattention while operating power tools may result in
serious personal injury.
b. Use safety equipment. Always wear eye protection.
Safety equipment such as dust mask, non-skid safety
shoes, hard hat, or hearing protection used for
appropriate conditions will reduce personal injuries.
c. Avoid accidental starting. Ensure the switch is in
the off position before plugging in. Carrying power
tools with your finger on the switch or plugging in power
tools that have the switch on invites accidents.
d. Remove any adjusting key or wrench before turning
the power tool on. A wrench or a key left attached to a
rotating part of the power tool may result in personal injury.
e. Do not overreach. Keep proper footing and balance
at all times. This enables better control of the power tool
in unexpected situations.
f. Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing and gloves away
from moving parts. Loose clothes, jewellery or long hair
can be caught in moving parts.
g. If devices are provided for the connection of dust
extraction and collection facilities, ensure these
are connected and properly used. Use of these
devices can reduce dust related hazards.
4. Power tool use and care
a. Do not force the power tool. Use the correct power
tool for your application. The correct power tool will do
the job better and safer at the rate for which it was designed.
b. Do not use the power tool if the switch does not
turn it on and off. Any power tool that cannot be controlled
with the switch is dangerous and must be repaired.
c. Disconnect the plug from the power source before
making any adjustments, changing accessories, or
storing power tools. Such preventive safety measures
reduce the risk of starting the power tool accidentally.
d. Store idle power tools out of the reach of children
and do not allow persons unfamiliar with the power
tool or these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained users.
e. Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and any
other condition that may affect the power tools
operation. If damaged, have the power tool repaired
before use. Many accidents are caused by poorly
maintained power tools.
f. Keep cutting tools sharp and clean. Properly maintained
cutting tools with sharp cutting edges are less likely to
bind and are easier to control.
Termékspecifikációk
Márka: | Black & Decker |
Kategória: | Boormachine |
Modell: | CD70CKA |
Szüksége van segítségre?
Ha segítségre van szüksége Black & Decker CD70CKA, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók Boormachine Black & Decker
13 Október 2024
10 Október 2024
4 Október 2024
4 Október 2024
29 Szeptember 2024
24 Szeptember 2024
21 Szeptember 2024
20 Szeptember 2024
20 Szeptember 2024
17 Szeptember 2024
Útmutatók Boormachine
- Boormachine Milwaukee
- Boormachine Parkside
- Boormachine Worx
- Boormachine Bosch
- Boormachine AEG
- Boormachine Einhell
- Boormachine Ozito
- Boormachine Makita
- Boormachine Hyundai
- Boormachine Flex
- Boormachine Scheppach
- Boormachine Ergotools Pattfield
- Boormachine Ribimex
- Boormachine Mafell
- Boormachine Genesis
- Boormachine Güde
- Boormachine Hitachi
- Boormachine Hilti
- Boormachine Workzone
- Boormachine Global
- Boormachine Kawasaki
- Boormachine PowerPlus
- Boormachine DEDRA
- Boormachine Metabo
- Boormachine RYOBI
- Boormachine Proxxon
- Boormachine HiKOKI
- Boormachine Festool
- Boormachine Yato
- Boormachine Baumr-AG
- Boormachine Trotec
- Boormachine Delta
- Boormachine Zipper
- Boormachine Bavaria By Einhell
- Boormachine Porter-Cable
- Boormachine DeWalt
- Boormachine Stanley
- Boormachine Silverline
- Boormachine Vonroc
- Boormachine Cotech
- Boormachine Alpha Tools
- Boormachine Luxor
- Boormachine Holzmann
- Boormachine Fein
- Boormachine Craftsman
- Boormachine Graphite
- Boormachine Ferm
- Boormachine Tryton
- Boormachine Skil
- Boormachine Meec Tools
- Boormachine Sun Joe
- Boormachine Tacklife
- Boormachine Maktec
- Boormachine Steren
- Boormachine Bort
- Boormachine Power Craft
- Boormachine Eibenstock
- Boormachine Topcraft
- Boormachine Gamma
- Boormachine Clas Ohlson
- Boormachine Carat
- Boormachine Kress
- Boormachine Varo
- Boormachine Truper
- Boormachine Kinzo
- Boormachine Bruder Mannesmann
- Boormachine Meister Craft
- Boormachine RIDGID
- Boormachine Rupes
- Boormachine Batavia
- Boormachine Protool
- Boormachine Westfalia
- Boormachine Huvema
- Boormachine Stomer
- Boormachine Elu
- Boormachine Blucave
- Boormachine Kreg
- Boormachine Sthor
- Boormachine Verto
- Boormachine Rok
- Boormachine Profitech
- Boormachine Narex
- Boormachine Rikon
- Boormachine Duro Pro
- Boormachine Baier
- Boormachine RUKO
- Boormachine Felisatti
- Boormachine MSW
- Boormachine Robust
- Boormachine Einhell Bavaria
- Boormachine MyTool
- Boormachine G-Technology
- Boormachine Rodcraft
- Boormachine Stalco
Legújabb útmutatók Boormachine
16 Október 2024
16 Október 2024
16 Október 2024
16 Október 2024
16 Október 2024
16 Október 2024
16 Október 2024
16 Október 2024
15 Október 2024
14 Október 2024