Használati útmutató Black & Decker BDCDD18N

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Black & Decker BDCDD18N (108 oldal) a fúrógép kategóriában. Ezt az útmutatót 5 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/108
www.blackanddecker.eu
BDCDD18
2
A
B C
D
ENGLISH
(Original instructions)
3
Intended use
Your BLACK+DECKER BDCDD18 - Drill, Screwdriver
has been designed for screwdriving applications and for
drilling in wood, metal and plastics. This tool is intended
for consumer use only.
Safety instructions
General power tool safety warnings
@Warning! Read all safety warnings and all
instructions. Failure to follow the warnings
and instructions listed below may result in
electric shock, re and/or serious injury.
Save all warnings and instructions for future refer-
ence. The term "power tool" in all of the warnings listed
below refers to your mains operated (corded) power tool
or battery operated (cordless) power tool.
1. Work area safety
a. Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
b. Do not operate power tools in explosive
atmospheres, such as in the presence of
ammable liquids, gases or dust. Power tools
create sparks which may ignite the dust or fumes.
c. Keep children and bystanders away while
operating a power tool. Distractions can cause you
to lose control.
2. Electrical safety
a. Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodied plugs and matching outlets will
reduce risk of electric shock.
b. Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
c. Do not expose power tools to rain or wet
conditions. Water entering a power tool will increase
the risk of electric shock.
d. Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords increase
the risk of electric shock.
e. When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of a
cord suitable for outdoor use reduces the risk of
electric shock.
f. If operating a power tool in a damp location is
unavoidable, use a residual current device (RCD)
protected supply. Use of an RCD reduces the risk of
electric shock.
3. Personal safety
a. Stay alert, watch what you are doing and use
common sense when operating a power tool. Do
not use a power tool while you are tired or under
the inuence of drugs, alcohol or medication. A
moment of inattention while operating power tools may
result in serious personal injury.
b. Use personal protective equipment. Always wear
eye protection. Protective equipment such as dust
mask, non-skid safety shoes, hard hat, or hearing
protection used for appropriate conditions will reduce
personal injuries.
c. Prevent unintentional starting. Ensure the switch
is in the off-position before connecting to power
source and/or battery pack, picking up or carrying
the tool. Carrying power tools with your nger on the
switch or energising power tools that have the switch
on invites accidents.
d. Remove any adjusting key or wrench before
turning the power tool on. A wrench or a key left
attached to a rotating part of the power tool may result
in personal injury.
e. Do not overreach. Keep proper footing and
balance at all times. This enables better control of
the power tool in unexpected situations.

Termékspecifikációk

Márka: Black & Decker
Kategória: fúrógép
Modell: BDCDD18N

Szüksége van segítségre?

Ha segítségre van szüksége Black & Decker BDCDD18N, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók fúrógép Black & Decker

Útmutatók fúrógép

Legújabb útmutatók fúrógép

Makita

Makita P-90451 Útmutató

1 Április 2025
Einhell

Einhell AS-E 18-2 Útmutató

30 Március 2025
Verto

Verto 65H105 Útmutató

28 Március 2025
Makita

Makita HR2450 Útmutató

28 Március 2025
Makita

Makita HR5001C Útmutató

28 Március 2025
Makita

Makita 6501X Útmutató

28 Március 2025
Makita

Makita HK1800 Útmutató

28 Március 2025