Használati útmutató Bertazzoni CB486G00XLP

Bertazzoni sütő CB486G00XLP

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Bertazzoni CB486G00XLP (16 oldal) a sütő kategóriában. Ezt az útmutatót 2 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/16
Installation, Service and User Instructions
BUILT-IN GAS/ELECTRIC COOKTOP
BERTAZZONI
DIMENSIONS: 48’’(1216 mm) (W) x 25 1/8’’ (640mm D) ) (
MODELs:
CTYK..U7X(2,5)A
310682
2
IMPORTANT - PLEASE READ AND FOLLOW
-Before beginning installation, please read these instructions completely and carefully.
-Do not remove permanently affixed labels, wa may void the warranty. -Please observe alrnings, or plates from the product. This l local
and national codes and ordinances.
-Please ensure that this product is properly grounded.
-The installer should leave these instructions with the consumer who should retain for local inspector's use and for
future reference.
-The electrical plug should always be accessible.
Installation must conform with local codes or in the absence of
codes, the National Fuel Gas Code ANSIZ223.1-latest edition. El
ectrical
installation must be in accordance with the National Electrical Code, ANIS/NFPA70
- latest edition and/or local codes. IN CANADA:
Installation must be in accordance with the current CAN/CGA-B149.1 National Gas Installation Code or CAN/CGA-B
149.2, Propane
Installation Code and/or local codes. Electrical installation must be in accordance with the current CSA C22.1 Canadian Electrical
Codes Part 1 and/or local codes.
Installation of any gas-fired equipment should be made by a licensed plumber. A manual gas shut-off valve must be installed in the gas
supply line ahead of the oven in the gas flow for safety and ease of service.
IMPORTANT: SAVE FOR LOCAL ELECTRICAL INSPECTOR’S USE.
READ AND SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
OBSERVE ALL GOVERNING CODES AND ORDINANCES.
WARNING: If the information in this manual is not followed exactly, a
fire or explosion may result causing property damage, personal injury
or death.
Do not store or use gasoline or ot and liquids in her flammable vapors
the vicinity of this or any other appliance.
WHAT TO DO IF YOU SMELL GAS
- Do not light any appliance.
- Do not touch any electrical switch.
- Do not use any phone in your building.
- Immediately call your gas supp phone. Follow lier from a neighbor’s
the gas supplier’s instructions.
- If you cannot reach your gas suppliers, call the fire department.
Installation and service must be performed by a qualified installer,
service agency or the gas supplier.
3
WARNING
Read this instruction booklet before installing and using the appliance.
The manufacturer will not be responsible for any damage to property or to persons caused by
incorrect installation or improper use of the appliance.
The manufacturer reserves the right to make changes to its products when considered necessary and useful,
without affecting the essential safety and operating characteristics.
This appliance has been designed for non-professional, domestic use only.
Warning: do not use this appliance to heat a room.
Installation instructions
This appliance shall only be installed by an authorized person. This appliance shall be installed in
accordance with the manufacturer’s installation instructions, IMPORTANT: this appliance must be
installed in accordance with the norms & standards of the country where it will be installed.
The installation of this appliance must conform to local codes and ordinances. In the absence of
local codes, Installations must conforms to American National Standards, National Fuel Gas Code
ANSI Z223.1 – latest edition** or B149.1.
If local codes perm A or CGA certified it, a flexible me tal appliance connection with the new AG
design, max. 5 feet (1,5 m) long, ½” I.D. is r ppliance to the gas ecommended for connecting this a
supply line. Do not iance. The pressure bend or damage the flexible connector when moving the appl
regulator has ½” fe based on the size of male pipe thread. The appropriate fitting must be determined
your gas supply line, the flexible metal connector and the shutoff valve.
The appliance, whe h local codes or, in n installed, must be electrically grounded in accordance wit
the absence of local codes, with the National Electrical Code, ANSI/NFPA 70.
The appliance must be isolated from the gas supp s individual manual ly piping system by closing it
shutoff valve during est pressures equal any pressure testing of the gas supply piping system at t
to or less than ½ psi (3.5 kPa).
For use with a pres s appliance; it shall sure regulator. The regulator supplied must be used with thi
be properly installed in order to be accessible when appliance is installed in its final location.
The gas appliance pressure regulator must be set for the gas with which the appliance is used.
This appliance can be used with Natural Gas and LP Gas. It is shipped from the factory adjusted for
use with Natural Gas: CONVERSION FIXED ORIFICES ARE LOCATED IN THE LITERATURE PACK
SUPPLIED WITH THE UNIT.
A gas nozzle kit for the change of type of gas are contained inside the package together with the
gas appliance installation kit and instruction booklet.
The maximum inlet gas supply pressure incoming to the gas appliance pressure regulator is 20’’
water column (5 kPa) .
The minimum gas supply pressure for checking the regulator setting shall be at least 1“ w.c. (249 Pa)
above the inlet specified manifold pressure to the appliance (this operating pressure is 4” w.c.
(1.00 kPa) for Natural Gas and 11” w.c. (2.75 kPa for LP Gas).
All opening and holes in the wall and floor, back and under the appliance shall be sealed before
installation of the appliance.
To eliminate the risk of burns or fire by reaching over heated surface units, cabinet storage space
located above the surface units should be avoided. If cabinet storage is to be provided, the risk can
be reduced by installing a rabge hood that projects horizontally a minimum of 5 inches beyond the
bottom of the cabinets
It’s always compulsory to install the riser even for an island installation
ATTENTION: A manual valve shall be installed in an accessible location in the gas line external to the
appliance for the purpose of turning on or shutting off gas to the appliance

Termékspecifikációk

Márka: Bertazzoni
Kategória: sütő
Modell: CB486G00XLP

Szüksége van segítségre?

Ha segítségre van szüksége Bertazzoni CB486G00XLP, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók sütő Bertazzoni

Bertazzoni

Bertazzoni MAS100 6 MFE DXE Útmutató

3 Április 2025
Bertazzoni

Bertazzoni HER120 6G MFE DNET Útmutató

31 Március 2025
Bertazzoni

Bertazzoni HER90 6 MFE DNET Útmutató

30 Március 2025
Bertazzoni

Bertazzoni Professional PROF365INSGIT Útmutató

12 Január 2025
Bertazzoni

Bertazzoni HER126G2EAVT Útmutató

4 Január 2025
Bertazzoni

Bertazzoni PRO96L1EGIT Útmutató

4 Január 2025
Bertazzoni

Bertazzoni PRO96L1EART Útmutató

4 Január 2025
Bertazzoni

Bertazzoni PRO96L1EBIT Útmutató

4 Január 2025
Bertazzoni

Bertazzoni PRO95I1ENET Útmutató

4 Január 2025
Bertazzoni

Bertazzoni PRO95I1EROT Útmutató

4 Január 2025

Útmutatók sütő

Legújabb útmutatók sütő

Siemens

Siemens HB23A1520S Útmutató

9 Április 2025
Whirlpool

Whirlpool akp 237 Útmutató

9 Április 2025
Beko

Beko BQM24400BPS Útmutató

9 Április 2025
Stoves

Stoves SEH700CTC Útmutató

9 Április 2025
Koenic

Koenic KBO 42211 Útmutató

9 Április 2025
Novamatic

Novamatic FH67-412K Útmutató

9 Április 2025
Smeg

Smeg c 9 gvx be Útmutató

9 Április 2025
Korona

Korona 57157 Útmutató

9 Április 2025
Miele

Miele CSAD 1400 Útmutató

9 Április 2025
Ignis

Ignis AKH 2012 IX Útmutató

9 Április 2025