Használati útmutató Beko WUE 7511 X0A

Beko mosógép WUE 7511 X0A

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Beko WUE 7511 X0A (84 oldal) a mosógép kategóriában. Ezt az útmutatót 3 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/84
Document Number=
1911861 _EN / 17-07-20.(14:18)667
WUE 7511 X0A
EN/SL/HR
Washing Machine
User’s Manual
Pralni stroj
Uporabniški priročnik
Perilica rublja
Korisnički priručnik
This product was manufactured using the latest technology in environmentally friendly conditions.
Washing Machine / User’s Manual
3 / EN
1
General safety instructions
This section includes security instructions which may help prevent
the injuries and material damage risks. All kinds of warranties shall
be invalid if these instructions are not observed.
1.1 Life and property safety
u
Never place the product on a carpet-covered floor. Electrical parts
will get overheated since air cannot circulate from under the device.
This will cause problems with your product.
u
Unplug the product if it is not in use.
u
Always have the installation and repairing procedures carried out by
the Authorised Service Agent. The manufacturer shall not be held
liable for damages that may arise from procedures carried out by
unauthorised persons.
u
The water supply and draining hoses must be securely fastened and
remain undamaged. Otherwise, water leak may occur.
u
While there is still water inside the product, never open the loading
door or remove the filter. Otherwise, risk of flooding and injury from
hot water will occur.
u
Do not force open the locked loading door. Door can be opened a few
minutes after the washing cycle ends. In case of forcing the loading
door to open, the door and the lock mechanism may get damaged.
u
Use detergents, softeners and supplements suitable for automatic
washing machines only.
u
Follow the instructions on the label of textiles and the detergent
package.
1.2 Children's safety
u
This product can be used by the children who are at the age of 8 and
over and the people whose physical, sensory or mental skills are not
fully developed or who do not have necessary required experience
and knowledge as long as they are supervised or trained about the
safe use of the product and its risks. Children should not play with the
device. Cleaning and maintenance works should not be performed
by children unless they are supervised by someone. Children of less
than 3 years should be kept away unless continuously supervised.
u
Packaging materials may be dangerous for the children. Keep
packaging materials in a safe place away from reach of the children.
4 / EN
Washing Machine / User’s Manual
u
Electrical products are dangerous for the children. Keep the children
away from the product when it is in use. Do not allow them to play
with the product. Use child lock to prevent children from intervening
with the product.
u
Do not forget to close the loading door when leaving the room where
the product is located.
u
Store all detergents and additives in a safe place away from the
reach of the children by closing the cover of the detergent container
or sealing the detergent package.
1.3 Electrical safety
u
If the product has a failure, it should not be operated unless it is
repaired by the Authorised Service Agent. Risk of electric shock!
u
This product is designed to resume operating in the event of
powering on after a power interruption. If you wish to cancel the
programme, see "Cancelling the programme" section.
u
Plug the product into a grounded outlet protected by a 16 A fuse. Do
not neglect to have the grounding installation made by a qualified
electrician. Our company shall not be liable for any damages that
will arise when the product is used without grounding in accordance
with the local regulations.
u
Do not wash the product by spraying or pouring water onto it! Risk of
electric shock!
u
Never touch the power cable plug with wet hands! Do not grab the
power cord to unplug the machine, always unplug it by holding the
socket with one hand, and pulling the plug with the other hand.
u
Product should be unplugged during installation, maintenance,
cleaning and repair procedures.
u
If the power cable is damaged, it must be replaced by the
manufacturer, after sales service or a similarly qualified person
(preferably an electrician) or someone designated by the importer in
order to avoid possible risks.
1.4 Hot surface safety
While washing the laundry at high
temperatures, the loading door glass
will get hot. Considering this fact, during
washing operation keep the children away
from the loading door of the product to
prevent them touching it.
Washing Machine / User’s Manual
5 / EN
2
Important instructions for environment
3
Intended use
This product has been designed for domestic use. It is not for commercial
purposes or it should not be used out of its intended use.
The product must only be used for washing and rinsing of laundry that are
marked accordingly.
The manufacturer waives any responsibility arisen from incorrect usage or
transportation.
The service life of your product is 10 years. During this period, original spare
parts will be available to operate the appliance properly.
2.1 Compliance with WEEE Directive
This product complies with EU WEEE Directive (2012/19/EU). This product bears a
classification symbol for waste electrical and electronic equipment (WEEE).
This product has been manufactured with high quality parts and materials which
can be reused and are suitable for recycling. Do not dispose of the waste product
with normal domestic and other wastes at the end of its service life. Take it to the
collection center for the recycling of electrical and electronic equipment. Please
consult your local authorities to learn about these collection centers.
Compliance with RoHS Directive:
The product you have purchased complies with EU RoHS Directive (2011/65/EU). It does not
contain harmful and prohibited materials specified in the Directive.
2.2 Package information
Packaging materials of the product are manufactured from recyclable materials in accordance
with our National Environment Regulations. Do not dispose of the packaging materials together
with the domestic or other wastes. Take them to the packaging material collection points
designated by the local authorities.
6 / EN
Washing Machine / User’s Manual
4
Technical specifications
Supplier name or trademark Beko
Model name
WUE 7511 X0A
7000440050
Rated capacity (kg) 7
Maximum spin speed (rpm) 1000
Built-in No
Height (cm) 84
Width (cm) 60
Depth (cm) 49
Single Water inlet / Double Water inlet • / -
Available
Electrical input (V/Hz) 230 V / 50Hz
Total current (A) 10
Total power (W) 2200
Main model code 9217
C
SUPPLIER’S NAME MODEL IDENTIFIER
A
A
(*)
The model information as stored in the product database can be reached by
entering following website and searching for your model identifier (*) found
on energy label.
https://eprel.ec.europa.eu/
Washing Machine / Users Manual
7 / EN
4.1 Installation
Apply to the nearest authorised service agent for the installation of your product.
Preparation of the location and electrical, tap water and waste water installations at the place of
installation is under customer's responsibility.
Make sure that the water inlet and discharge hoses as well as the power cable are not folded,
pinched or crushed while pushing the product into its place after installation or cleaning
procedures.
Make sure that the installation and electrical connections of the product are performed by
authorised service. Manufacturer shall not be held liable for damages that may arise from
procedures carried out by unauthorised persons.
Prior to installation, visually check if the product has any defects on it. If so, do not have it installed.
Damaged products cause risks for your safety.
4.1.1 Appropriate installation location
Place the product on a hard and level floor. Do not put it onto a carpet with high pile or other
similar surfaces.
When the washing machine and dryer are placed on top of each other, their total weight –when
loaded– amounts to 180 kilograms. Place the product on a solid and flat floor that has sufficient
load carrying capacity!
Do not place the product on the power cable.
Do not install the product in the environments where the temperature falls below 0 ºC.
Leaving a gap at the sides of the machine is suggested to reduce vibration and noise
On a graduated floor, do not place the product next to the edge or on a platform.
Do not place heat sources such as Hobs, Irons, Ovens, etc. on the washing machine and do not use
them on the product.
4.1.3 Removing the transportation locks
1 Loosen all bolts with an appropriate wrench until they turn freely.
2 Remove the transport safety bolts by turning them slightly.
3 Insert the plastic covers in the bag containing the user manual to the openings on the rear
panel.
A
CAUTION: Remove the transportation safety bolts before operating the washing machine! Otherwise, the
product will be damaged.
C
Keep the transportation safety bolts in a safe place to reuse when the washing machine needs to be moved again
in the future.
Install the transport safety bolts in reverse order of the disassembly procedure.
Never move the product without the transportation safety bolts properly fixed in place!
8 / EN
Washing Machine / Users Manual
4.1.4 Connecting water supply
C
The water supply pressure required to run the product is between 1 to 10 bars (0.1 – 1 MPa). It is necessary to have
10 – 80 liters of water flowing from the fully open tap in one minute to have your machine run smoothly. Attach a
pressure reducing valve if water pressure is higher.
A
CAUTION: Models with a single water inlet should not be connected to the hot water tap. In such a case the
laundry will get damaged or the product will switch to protection mode and will not operate.
CAUTION: Do not use old or used water inlet hoses on the new product. It may cause stains on your laundry.
1 Tighten the nuts of the hose by hand. Never use a tool when
tightening the nuts.
2 When hose connection is completed, check whether there is
leak problems at the connection points by opening the taps
fully. If any leaks occur, turn off the tap and remove the nut.
Retighten the nut carefully after checking the seal. In order to
prevent the water leaks and resultant damages, keep the taps
closed when you do not use the product.
4.1.5 Connecting the drain hose to the drain
Attach the end of the drain hose directly to waste water drain, lavatory or bathtub.
A
CAUTION: Your drain house will be flooded if the hose comes out of its housing during water discharge.
Moreover, there is risk of scalding due to high washing temperatures! In order to prevent such situations and
make sure that the machine performs water intake and discharge processes without any problem, fix the drain
hose securely.
40 cm
100 cm
• Connect the drain hose to a minimum height of 40
cm and a maximum height of 100 cm.
• In case the drain hose is elevated after laying it on
the floor level or close to the ground (less than 40 cm
above the ground), water discharge becomes more
difficult and the laundry may come out excessively
wet. Therefore, follow the heights described in the
figure.
To prevent the waste water to go back into the machine again and to ensure easy drainage, do not
immerse the end of the hose into the waste water or do not insert it into the drain for more than
15 cm. If it is too long, cut it short.
The end of the hose should not be bent, it should not be stepped on and the hose must not be
pinched between the drain and the machine.
If the length of the hose is too short, use it by adding an original extension hose. Length of the
hose may not be longer than 3.2 m. To avoid water leak failures, the connection between the
extension hose and the drain hose of the product must be fitted well with an appropriate clamp as
not to come off and leak.
Washing Machine / Users Manual
9 / EN
4.1.6 Adjusting the feet
A
CAUTION: In order to ensure that the product operates more silently and vibration-free, it must stand level
and balanced on its feet. Balance the machine by adjusting the feet. Otherwise, the product may move from its
place and cause crushing and vibration problems.
CAUTION: Do not use any tools to loosen the lock nuts. Otherwise, they will get damaged.
1 Loosen the lock nuts on the feet by hand.
2 Adjust the feet until the product stands in a stable and balanced way.
3. Tighten all lock nuts by hand again.
4.1.7 Electrical connection
Connect the product to a grounded outlet protected by a 16 A fuse.
The Manufacturer shall not
be liable for any damages that will arise when the product is used without grounding in
accordance with the local regulations.
Connection must comply with national regulations.
The wiring for the electrical outlet circuit must be sufficient to meet the appliance requirements.
Use of a Groud Fault Circuit Interrupter (GFCI) is recommended.
Power cable plug must be within easy reach after installation.
If the current value of the fuse or breaker in the house is less than 16 Amps, have a qualified
electrician install a 16 Amp fuse.
The voltage specified in the "Technical specifications" section must be equal to your mains
voltage.
Do not make connections via extension cables or multi-plugs.
B
CAUTION: Damaged power cables must be replaced by the Authorised Service Agents.
4.1.8 Initial use
Before starting to use the product make sure that the preparations
are made which are in line with the “Important Safety and
Environment Instructions” and the instructions in the “Installation”
section.
To prepare the product for washing laundry, perform first operation
in Drum Cleaning programme. If this program is not available in your
machine, apply the method which is described in the section 4.4.2.
C
Use an anti-limescale suitable for the washing machines.
Some water might have remained in the product due to the quality control processes in the production. It is not
harmful for the product.
10 / EN
Washing Machine / Users Manual
4.2 Preparation
4.2.1 Sorting the laundry
* Sort laundry according to type of fabric, color, and degree of soiling and allowable water
temperature.
* Always obey the instructions given on the garment tags.
4.2.2 Preparing laundry for washing
Laundry items with metal attachments such as, underwired bras, belt buckles or metal buttons
will damage the machine. Remove the metal pieces or wash the clothes by putting them in a
laundry bag or pillow case.
Take out all substances in the pockets such as coins, pens and paper clips, and turn pockets inside
out and brush. Such objects may damage the product or cause noise problem.
Put small size clothes such as infant's socks and nylon stockings in a laundry bag or pillow case.
Place curtains in without compressing them. Remove curtain attachment items.
Fasten zippers, sew loose buttons and mend rips and tears.
Wash “machine washable” or “hand washable” labeled products only with an appropriate
programme.
Do not wash colours and whites together. New, dark coloured cottons release a lot of dye. Wash
them separately.
Tough stains must be treated properly before washing. If unsure, check with a dry cleaner.
Only use the dyes / color changers and descaling agents which are appropriate to machine wash.
Always follow the instructions on the package.
Wash trousers and delicate laundry turned inside out.
Keep laundry items made of Angora wool in the freezer for a few hours before washing. This will
reduce pilling.
Laundry that are subjected to materials such as flour, lime dust, milk powder, etc. intensely must
be shaken off before placing into the machine. Such dusts and powders on the laundry may build
up on the inner parts of the machine in time and can cause damage.
4.2.3 Tips for energy and water saving
Following information will help you use the product in an ecological and energy/water-efficient
manner.
Operate the product in the highest load capacity allowed for the programme you have selected,
but do not overload. See, „Programme and consumption table“.
Observe the temperature instructions on the detergent packaging.
Wash slightly soiled laundry at low temperatures.
Use faster programmes for small quantities of lightly soiled laundry.
Do not use prewash and high temperatures for laundry that is not heavily soiled or stained.
If you plan to dry your laundry in a dryer, select the highest spin speed recommended during
washing process.
Do not use more detergent than the recommended on the detergent packaging.
4.2.4 Loading the laundry
1. Open the laundry cover.
2. Put the laundry items into the machine in a loose manner.
3. Push and close the loading cover until you hear the locking sound. Ensure that no items are caught
in the door. The loading door is locked while a programme is running. The door can only be opened
a while after the programme comes to an end.
4.2.5 Correct load capacity
The maximum load capacity depends on the type of laundry, the degree of soiling and the washing
programme desired.
Machine automatically adjusts the water amount according to the weight of the laundry put inside it.
A
WARNING: Follow the information in the “Programme and consumption table”. When overloaded, machine's
washing performance will drop. Moreover, noise and vibration problems may occur.
Washing Machine / Users Manual
11 / EN
4.2.6 Using detergent and softener
C
When using detergent, softener, starch, fabric dye, bleacher and decolorant, descaling agents; read the
manufacturer's instructions written on the package and follow the dosages specified. Use measuring cup if
available.
132
The detergent drawer is composed of three
compartments:
– (1) for prewash
– (2) for main wash
– (3) for softener
– ( ) in addition, there is a siphon piece in the
softener compartment.
Detergent, softener and other cleaning agents
Add detergent and softener before starting the washing programme.
While the washing cycle is in progress, do not leave the detergent dispenser open!
When using a programme without prewash, do not put any detergent into the prewash
compartment (compartment nr. "1").
In a programme with prewash, do not put liquid detergent into the prewash compartment
(compartment nr. "1").
Do not select a programme with prewash if you are using a detergent bag or dispensing ball. Place
the detergent bag or the dispensing ball directly among the laundry in the machine.
If you are using liquid detergent, do not forget to place the liquid detergent container into the main
wash compartment (compartment number “2”).
Choosing the detergent type
Detergent type to be used depends on the washing programme, fabric type and color.
Use different detergents for coloured and white laundry.
Wash your delicate clothes only with special detergents (liquid detergent, wool shampoo, etc.)
intended solely for delicate clothes and at suggested programmes..
When washing dark coloured clothes and quilts, it is recommended to use liquid detergent.
• Wash woolens at suggested programme with special detergent made specifically for woolens
• Please review the program descriptions part for suggested program for different textiles.
All recommendations about detergents are valid for selectable temperature range of programmes.
A
CAUTION: Use only detergents manufactured specifically for washing machines.
CAUTION: Do not use soap powder.
Adjusting detergent amount
The amount of washing detergent to be used depends on the amount of laundry, the degree of
soiling and water hardness.
Do not use amounts exceeding the dosage quantities recommended on the detergent package
to avoid problems of excessive foam, poor rinsing, financial savings and finally, environmental
protection.
Use lesser detergent for small amounts or lightly soiled clothes.
Using softeners
Pour the softener into the softener compartment of the detergent drawer.
Do not exceed the (>max<) level sign on the softener compartment.
If the softener has lost its fluidity, dilute it with water before putting it in the detergent drawer.

Termékspecifikációk

Márka: Beko
Kategória: mosógép
Modell: WUE 7511 X0A

Szüksége van segítségre?

Ha segítségre van szüksége Beko WUE 7511 X0A, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók mosógép Beko

Útmutatók mosógép

Legújabb útmutatók mosógép