Használati útmutató AXESS AXBUCH-LX6V

AXESS nincs kategorizálva AXBUCH-LX6V

Olvassa el alább 📖 a magyar nyelvű használati útmutatót AXESS AXBUCH-LX6V (2 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 6 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/2
AxxessInterfaces.com © COPYRIGHT 2020 METRA ELECTRONICS CORPORATION REV. 1/28/20 INSTAXBUCH-LX6V
AxxessInterfaces.com © COPYRIGHT 2020 METRA ELECTRONICS CORPORATION REV. 1/28/20 INSTAXBUCH-LX6V
I N S TA L L AT I O N I N S T R U C T I O N S
I N S TA L L AT I O N I N S T R U C T I O N S
AXBUCH-LX6V
AXBUCH-LX6V
Attention! Let the vehicle sit with the key
out of the ignition for a few minutes before
removing the factory radio. When testing the
aftermarket equipment, ensure that all factory
equipment is connected before cycling the
key to ignition.
Attention! Let the vehicle sit with the key
out of the ignition for a few minutes before
removing the factory radio. When testing the
aftermarket equipment, ensure that all factory
equipment is connected before cycling the
key to ignition.
INTERFACE FEATURES
INTERFACE FEATURES
INTERFACE COMPONENTS
INTERFACE COMPONENTS
TOOLS REQUIRED
• Crimping tool and connectors, or solder gun,
solder, and heat shrink • Tape • Wire cutter
• Zip ties
TOOLS REQUIRED
• Crimping tool and connectors, or solder gun,
solder, and heat shrink • Tape • Wire cutter
• Zip ties
TABLE OF CONTENTS
Connections ............................................................2
TABLE OF CONTENTS
Connections ............................................................2
Lexus Backup Camera Retention/Add-On
2014-Up
Lexus Backup Camera Retention/Add-On
2014-Up
APPLICATIONS
APPLICATIONS
• Retains the factory backup camera
• Allows an aftermarket camera to be added to the factory screen †
• Includes an AXCSD-6V 12V-to-6V step-down for the factory camera
• Retains the factory backup camera
• Allows an aftermarket camera to be added to the factory screen †
• Includes an AXCSD-6V 12V-to-6V step-down for the factory camera
† Display and navigations model radios only
† Display and navigations model radios only
Lexus
ES300h 2015-2018
ES350 2015-2018
GS F 2016-Up
GS200T 2016-2017
GS300 2018-Up
GS350 2015-Up
GS450h 2015-Up
GX460 2016-Up
IS200t 2016-2017
IS250 2014-2015
IS300 2016-Up
IS350 2014-Up
LC500 2018-Up
LC500h 2018-Up
LS460 2015-2017
NX300 2018-Up
NX300h 2015-Up
NX200t 2015-2017
RC F 2015-Up
RC200t 2016-2017
RC300 2016-Up
RC350 2015-Up
RX350 2016-Up
RX450h 2016-Up
Lexus
ES300h 2015-2018
ES350 2015-2018
GS F 2016-Up
GS200T 2016-2017
GS300 2018-Up
GS350 2015-Up
GS450h 2015-Up
GX460 2016-Up
IS200t 2016-2017
IS250 2014-2015
IS300 2016-Up
IS350 2014-Up
LC500 2018-Up
LC500h 2018-Up
LS460 2015-2017
NX300 2018-Up
NX300h 2015-Up
NX200t 2015-2017
RC F 2015-Up
RC200t 2016-2017
RC300 2016-Up
RC350 2015-Up
RX350 2016-Up
RX450h 2016-Up
• AXBUCH-LX6V harness
• AXCSD-6V 12-volt to 6-volt step-down
• Green/Purple wire with terminal
• AXBUCH-LX6V harness
• AXCSD-6V 12-volt to 6-volt step-down
• Green/Purple wire with terminal
Visit AxxessInterfaces.com for more detailed information about the product and up-to-date
vehicle specific applications
Visit AxxessInterfaces.com for more detailed information about the product and up-to-date
vehicle specific applications
AxxessInterfaces.com © COPYRIGHT 2020 METRA ELECTRONICS CORPORATION REV. 1/28/20 INSTAXBUCH-LX6V
AxxessInterfaces.com © COPYRIGHT 2020 METRA ELECTRONICS CORPORATION REV. 1/28/20 INSTAXBUCH-LX6V
I N S TA L L AT I O N I N S T R U C T I O N S
I N S TA L L AT I O N I N S T R U C T I O N S
AXBUCH-LX6V
AXBUCH-LX6V
To retain the factory backup camera to an aftermarket radio:
• Connect the wire to chassis ground, and also to the wire from the AXCSD-6V.Black Black
• Connect the Yellow Blue/Red wire to the wire from the AXCSD-6V.
• Connect the reverse wire from the aftermarket radio, to the reverse signal in the vehicle, and
also to the wire from the AXCSD-6V.Blue/White
• Connect the
male
Yellow RCA jack to the backup camera input from the aftermarket radio.
• Disregard the
Green/Purple wire with terminal
, it will not be used in this application.
To allow an aftermarket camera to be added to the OEM screen:
• Connect the ground wire from the aftermarket camera to chassis ground.
• Connect the power wire from the aftermarket camera to accessory power.
• Connect the
female
Yellow RCA jack to the aftermarket camera.
• Tape off and disregard the following (2) wires, they will not be used in this application;
Black, Yellow
• The AXCSD-6V will not be used in this application.
• Looking at the 24-pin connector from the factory radio, If a wire is not present in pin-3,
follow these steps;
1. From the male connector from the AXBUCH-LX6V harness, locate pin-3.
2. Insert the
Green/Purple
wire with terminal into pin-3.
3. Locate a reverse wire from the vehicle, then attach the
Green/Purple wire with terminal
to that wire.
• Remove the 24-pin connector from the factory radio, then install the
AXBUCH-LX6V harness
in between.
CONNECTIONS
CONNECTIONS
To retain the factory backup camera to an aftermarket radio:
• Connect the wire to chassis ground, and also to the wire from the AXCSD-6V.Black Black
• Connect the Yellow wire to the wire from the AXCSD-6V.Blue/Red
• Connect the reverse wire from the aftermarket radio, to the reverse signal in the vehicle, and
also to the wire from the AXCSD-6V.Blue/White
• Connect the
male
Yellow RCA jack to the backup camera input from the aftermarket radio.
• Disregard the
Green/Purple wire with terminal
, it will not be used in this application.
To allow an aftermarket camera to be added to the OEM screen:
• Connect the ground wire from the aftermarket camera to chassis ground.
• Connect the power wire from the aftermarket camera to accessory power.
• Connect the
female
Yellow RCA jack to the aftermarket camera.
• Tape off and disregard the following (2) wires, they will not be used in this application;
Black, Yellow
• The AXCSD-6V will not be used in this application.
• Looking at the 24-pin connector from the factory radio, If a wire is not present in pin-3,
follow these steps;
1. From the male connector from the AXBUCH-LX6V harness, locate pin-3.
2. Insert the
Green/Purple
wire with terminal into pin-3.
3. Locate a reverse wire from the vehicle, then attach the
Green/Purple wire with terminal
to that wire.
• Remove the 24-pin connector from the factory radio, then install the
AXBUCH-LX6V harness
in between.

Termékspecifikációk

Márka: AXESS
Kategória: nincs kategorizálva
Modell: AXBUCH-LX6V

Szüksége van segítségre?

Ha segítségre van szüksége AXESS AXBUCH-LX6V, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók nincs kategorizálva AXESS

AXESS

AXESS AXDSPX-BM1 Útmutató

11 Január 2025
AXESS

AXESS AXAMP-FD1 Útmutató

28 December 2024
AXESS

AXESS AXAMP-CH5 Útmutató

28 December 2024
AXESS

AXESS AX-LOC Útmutató

28 December 2024
AXESS

AXESS AXAMP-CH4 Útmutató

28 December 2024
AXESS

AXESS AXBUCS-MZ286V Útmutató

10 Szeptember 2024
AXESS

AXESS 99-7014HG Útmutató

4 Szeptember 2024
AXESS

AXESS AXGM-17 Útmutató

4 Szeptember 2024
AXESS

AXESS AXGMLN-34 Útmutató

4 Szeptember 2024
AXESS

AXESS 99-7382HG Útmutató

4 Szeptember 2024

Útmutatók nincs kategorizálva

Legújabb útmutatók nincs kategorizálva

MOZA

MOZA SR-P Útmutató

10 Április 2025
Soundstream

Soundstream VRN-64HBL Útmutató

10 Április 2025
Panasonic

Panasonic Lumix DMW-AC11 Útmutató

10 Április 2025
Planet

Planet PWR-240-48 Útmutató

9 Április 2025
CaterChef

CaterChef 445001 Útmutató

9 Április 2025
IFM

IFM E40581 Útmutató

9 Április 2025
Livn

Livn Bolt Útmutató

9 Április 2025
Livn

Livn Beats Útmutató

9 Április 2025
Alpine

Alpine DP2-40C-BC Útmutató

9 Április 2025
IFM

IFM O3R252 Útmutató

9 Április 2025