Használati útmutató Auray BAI-2N

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Auray BAI-2N (8 oldal) a nincs kategorizálva kategóriában. Ezt az útmutatót 3 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/8
Two-Section Broadcast Arm
BAI Series
Owners Manual
with Internal Springs
2BAI SeriesOwner’s Manual
Introduction
Thank you for choosing the Auray two-section broadcast arm with
internal springs. This versatile and sturdy broadcast arm is for studio as
well as home use, and is ideal for broadcast, voiceovers or podcasts.
The BAI-series broadcast arms are designed with internal springs
that provide a clean and sleek look. The internal balance springs are
precision engineered to support and hold in place microphones of
up to 5 lb. (2.27 kg). The design also minimizes handling noise when
repositioning the arm. The broadcast arm features a standard 5/8˝27
microphone stud mount that is compatible with most shockmounts
and microphone clips. The angle of the microphone stud mount can be
adjusted and secured with the locking knob, and the angle is maintained
when repositioning the arm eliminating the need to readjust it every
time the arm is moved. An extension of up to 40 inches and the ability
to rotate the arm 360° allow for precise microphone placement.
The BAI series features a heavy-duty combo mount that consists of a sturdy
C-clamp and a heavy-metal desktop mount. The C-clamp is capable of
fastening onto desktops up to 2.3-inches thick. The C-clamps slim design
minimizes the clearance needed to mount it between the desk and wall.
The desktop mount detaches from the C-clamp and provides the option of
permanent installation to a desktop with the mounting screws (included).
A 14-inch riser is included for adding height to the broadcast
arm in order to extend over computer or studio monitors.
Options are available with integrated 15-foot Kopul 2000 XLR cable
(BAI-2X), or a 10-foot Type A to Type B USB cable (BAI-2U).
3BAI Series Owner’s Manual
4
6
Broadcast Arm
Threaded microphone mount 1
Microphone locking knob 2
Base stud 3
Combo mount
C-clamp 4
Tightening handle 5
Desktop mount 6
Insert hole 7
Insert hole locking knob 8
Screw holes (5) 9
Mounting screws (4) 10
Riser
Mounting stud 11
Riser insert hole 12
Riser locking knob 13
Microphone cable
XLR microphone cable (BAI-2X only) 14
USB cable (BAI-2U only) (Not Shown)
Overview
1
3
7
2
8
5
12
10
13
11
9
14

Termékspecifikációk

Márka: Auray
Kategória: nincs kategorizálva
Modell: BAI-2N

Szüksége van segítségre?

Ha segítségre van szüksége Auray BAI-2N, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók nincs kategorizálva Auray

Auray

Auray RF-PBO Útmutató

23 Augusztus 2024
Auray

Auray CFC-610 Útmutató

23 Augusztus 2024
Auray

Auray COHH-FD1 Útmutató

23 Augusztus 2024
Auray

Auray RFDT-128 Útmutató

23 Augusztus 2024
Auray

Auray CFP-ET6 Útmutató

23 Augusztus 2024
Auray

Auray BP-59A Útmutató

23 Augusztus 2024
Auray

Auray RF-5P-B Útmutató

23 Augusztus 2024
Auray

Auray PBS-AH Útmutató

23 Augusztus 2024
Auray

Auray BP-36A Útmutató

23 Augusztus 2024
Auray

Auray LTS-ST Útmutató

23 Augusztus 2024

Útmutatók nincs kategorizálva

Legújabb útmutatók nincs kategorizálva