Használati útmutató Atlas Sound FAP42TB

Atlas Sound hangszóró FAP42TB

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Atlas Sound FAP42TB (4 oldal) a hangszóró kategóriában. Ezt az útmutatót 5 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/4
AtlasSound.com 1/4
1601 JACK MCKAY BLVD. ENNIS, TEXAS 75119 U.S.A.
TELEPHONE: (800) 876-3333
FAX (800) 765-3435
©2011 Atlas Sound L.P. All rights reserved. Atlas Sound and Strategy Series are trademarks of Atlas Sound L.P. All other trademarks are property of their respective owners. ATS001159 RevG 8/11
Strategy Series® II 4" Loudspeaker System
FAP42T(B)
Specifications
Woofer Size 4" (102mm)
Power Handling 25 Watts
Transformer Taps at 70.7V 1, 2, 4, 8, & 16 Watts & 8 BypassΩ
Sensitivity (1W / 1M) 88dB Average
Frequency Response 75Hz – 20kHz (±7dB)
Magnet Weight 10oz (364g)
Cut-Out Diameter 9" (229mm)
Height 87⁄8" (225mm)
Diameter 101⁄2" (267mm)
Woofer 4" Poly Cone with Butyl Rubber Surround
HF Driver Coaxially Mounted PEI Dome Tweeter
Features
• Extended low frequency response from the 285 in3 optimally tuned
and ported deep drawn, galvanized steel enclosure
• Easy installation in drop tile or sheetrock ceilings via C-Ring / V-Rail
tile bridge and "Dog Leg" mounting system (Included)
• Front mounted tap selector switch for easy system tuning adjust-
ments includes transformer bypass setting for 8 / direct coupled Ω
operation
• Unique "trap door" input section allows for through conduit runs with
rigid or flex conduit
• 4 Pole detachable Phoenix style / Euro connector allows easy pre-
wiring and is convenient for daisy chaining additional Strategy Series
full range speakers or subwoofers
• “Press fit” grilles blend better into contemporary architecture
• Enhanced quality 70.7V / 100V internal transformers minimize inser-
tion loss and maintan low frequency response while providing
increased output for higher SPL applications
• Also Available in Black FAP42T-B
• UL 1480 Listed
Applications
FAP42T combines superior coaxial loudspeaker performance with
wide dispersion and easy installation. A low profile enclosure and wide
coverage make the FAP42T a perfect choice for low ceilings. The FAP42T
will satisfy the needs of owners, architects, contractors, and consultants
by delivering true, high fidelity sound reproduction in an attractive and
easy-to-install system. The FAP42T is ideal for high-intelligibility voice,
music, and signal reproduction in commercial, industrial, and institutional
applications.
FAP42T
FAP42T-B
AtlasSound.com 2/4
1601 JACK MCKAY BLVD. ENNIS, TEXAS 75119 U.S.A.
TELEPHONE: (800) 876-3333
FAX (800) 765-3435
©2011 Atlas Sound L.P. All rights reserved. Atlas Sound and Strategy Series are trademarks of Atlas Sound L.P. All other trademarks are property of their respective owners. ATS001159 RevG 8/11
General Description
The FAP42T's 130˚ dispersion angle effectively reduces the number of
loudspeakers necessary to achieve coverage in distributed systems with
low ceilings.
The loudspeaker component matches the performance of the legendary
Atlas Sound Strategy FA Series. High quality construction 4" coaxial cone
type driver includes a 1” voice coil and polypropylene cone with a butyl
rubber surround. The 19mm coaxially mounted tweeter is constructed
of PEI. A high sensitivity level means less power may be required to
achieve the desired SPL. This loudspeaker is factory assembled in an
optimally tuned & ported deep drawn enclosure and includes a specially
designed 16 Watt low saturation 70.7V / 100V transformer. A convenient
front mounted selector switch allows tap selection without the need to
remove the speaker from the ceiling. This switch also includes a trans-
former bypass setting for 8 direct coupled operation.Ω
Mounting Accessories
Mounting is simplified with Strategy style “Dog Leg” tabs that allow
easy installation into drop tile or drywall ceilings with provided tile bridge
assembly. The tile bridge consists of two “V” shaped formed mounting
rails and a C-Ring assembly. The C-Ring can be attached to the rails with
the screws provided to extend support to the T-Bar grid in suspended
ceiling applications. Multiple hole locations are provided to allow the
C-Ring to be positioned to the outer edge the tile if necessary.
For existing dry-wall applications the tile bridge C-Ring and support rails
can be inserted into the hole cut for the FAP42T. For easy positioning the
“V” shaped support rails match the shape of the C-Ring tabs for easy
maneuvering and location when working “blindly” above the deck
A uniquely designed “easy access” input panel on the side of the enclo-
sure allows for “thru” conduit runs using flexible or rigid conduit. Below
this cover resides a detachable Phoenix style locking four-pole connec-
tor which provides for easy daisy chain wiring to other full range 70.7V
loudspeakers or Atlas Sound FASUB subwoofer. The package includes an
attractive press-fit grille which nicely matches contemporary architecture.
For new construction drywall ceiling applications, the optional FAP42-TR
trim ring is available. This unit provides a marked location for drywall
installers to cut around essentially reserving the desired location in the
ceiling until final installation of FAP42T. Mounting holes are provided to
accommodate 16" or 24" OC stud / joist mounting.
A support ring is also provided on the top of the FAP42T enclosure to
facilitate an auxiliary support cable.
NOTE: IT IS MANDATORY THAT THIS SECONDARY SUPPORT
BE UTILIZED IN DROP CEILINGS FOR SAFETY AND SEISMIC
CONSIDERATIONS).
Architect & Engineer Specifications
System shall include a high performance 4" coaxial loudspeaker,
ported bass reflex enclosure and press-fit grille for conventional ceiling
installation.
Frequency response for the system shall be 75Hz – 20kHz (±7dB).
Sensitivity shall be 88dB average. Loudspeaker shall be comprised of a 4"
coaxial cone driver constructed of polypropylene with a butyl rubber sur-
round. The 19mm tweeter shall be constructed of PEI. Magnet shall be a
minimum of 10oz. (264g) and the voice coil diameter shall be 1” (25mm).
Transformer shall be a 70.7V / 100V type with 1, 2, 4, 8, and 16 watt pri-
mary taps (@70.7V) with a front mounted tap selector switch to include a
transformer bypass setting for 8 / direct coupled operation.Ω
Enclosure shall be a deep drawn steel enclosure design. Internal volume
shall be 285 in3. To facilitate connection in conduit systems, enclosure
shall be equipped with an access panel covering a recessed terminal cup.
This cover shall provide a combination 3⁄4" (19mm inside diameter) / 1"
(25mm inside diameter) knock-out on the side access and a top access
compression fitting / strain relief to facilitate flexible conduit up to 22mm
outside diameter or 1 in (25mm inside diameter) conduit when the com-
pression fitting is removed.
External wiring shall be accomplished via a removable lockable wiring
connector with screw-down terminals to provide both secure wire termi-
nation and pre-wiring capability before loudspeaker installation. The 4-pole
locking connector shall facilitate in / out connections and shall be located
in the recessed area behind the conduit access panel.
Seismic support eye shall be provided on top of enclosure for addi-
tional suspension point when used in drop tile ceilings. Construction of
enclosure shall be a minimum of 18-gauge, deep drawn galvanized metal.
The system shall include a support backing plate to reinforce the ceil-
ing material and tile support rails for use on either 2' x 4' (609mm x
1219mm) or 2' x 2' (609mm x 609mm) suspended ceiling tiles. This
assembly can all be installed from beneath the ceiling tile.
Overall front face diameter shall not exceed 10
1⁄2" (267mm); overall depth
from the bottom of the ceiling shall not exceed 87⁄8" (225mm). Grilles shall
be press-fit, manufactured from 24-gauge perforated steel mesh and fin-
ished in white epoxy. Round grille shall be 8
7⁄16" (214mm) diameter.
The loudspeaker shall be the Atlas Sound FAP42T.
C-Ring / V-Rails
FAP42-TR
AtlasSound.com 3/4
1601 JACK MCKAY BLVD. ENNIS, TEXAS 75119 U.S.A.
TELEPHONE: (800) 876-3333
FAX (800) 765-3435
©2011 Atlas Sound L.P. All rights reserved. Atlas Sound and Strategy Series are trademarks of Atlas Sound L.P. All other trademarks are property of their respective owners. ATS001159 RevG 8/11

Termékspecifikációk

Márka: Atlas Sound
Kategória: hangszóró
Modell: FAP42TB

Szüksége van segítségre?

Ha segítségre van szüksége Atlas Sound FAP42TB, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók hangszóró Atlas Sound

Atlas Sound

Atlas Sound IP-8SM Útmutató

29 December 2024
Atlas Sound

Atlas Sound IP-SDM Útmutató

19 Augusztus 2024
Atlas Sound

Atlas Sound M1000-W Útmutató

19 Augusztus 2024
Atlas Sound

Atlas Sound I8SM+ Útmutató

19 Augusztus 2024
Atlas Sound

Atlas Sound PM8GD-B Útmutató

19 Augusztus 2024
Atlas Sound

Atlas Sound SMA-15 Útmutató

19 Augusztus 2024
Atlas Sound

Atlas Sound GD87W Útmutató

19 Augusztus 2024
Atlas Sound

Atlas Sound DT22 Útmutató

19 Augusztus 2024
Atlas Sound

Atlas Sound All Weather SM63T Útmutató

19 Augusztus 2024
Atlas Sound

Atlas Sound PM8SUB Útmutató

19 Augusztus 2024

Útmutatók hangszóró

Legújabb útmutatók hangszóró

Behringer

Behringer B2520 PRO Útmutató

10 Április 2025
Marshall

Marshall Willen Útmutató

10 Április 2025
JBL

JBL Control 426LP Útmutató

9 Április 2025
Crestron

Crestron SAROS IC8T Útmutató

8 Április 2025
LD Systems

LD Systems STINGER G3 TMB Útmutató

8 Április 2025
JBL

JBL Conceal C83 Útmutató

8 Április 2025
Crestron

Crestron SAROS ICE4T Útmutató

7 Április 2025
Crestron

Crestron SAROS ICI6T Útmutató

7 Április 2025
Focal

Focal K2 Power M FRAK Útmutató

5 Április 2025
Match

Match UP C42BMW-FRT.3 Útmutató

3 Április 2025