Használati útmutató Atlas Sound APX40TN

Atlas Sound hangszóró APX40TN

Olvassa el alább 📖 a magyar nyelvű használati útmutatót Atlas Sound APX40TN (2 oldal) a hangszóró kategóriában. Ezt az útmutatót 5 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Letöltés PDF
Oldal 1/2
Wide Frequency & Consistent Beamwidth Control
Model APX40TN a conservatively rated 40 watt, constant-direc-
tivity paging loudspeakers for use in public address or pag-
ing applications. 40 watt model has a 40 watt tap at 70V.
Environment-resistant units feature a 60° x 40° (±10˚)
constant-dispersion pattern across the controlled frequency
band of 1.25-10 kHz. The rotating bell pivots in precise 15°
increments for exact on-site positioning of projection angles.
A triple lock security mounting method saves installation time
and provides long-term stability. APX models are equipped with
an internal 25/70.7/100 volt transformer with screw termi-
nal connections made beneath the rear cap. Rear cap
will facilitate armored cable. Power stripe code around
the driver assembly provides identification of power rating
from a distance. Loudspeaker mounts to die-cast zinc base.
Pre-mount the base to a standard 1-gang, 2-gang, or 4” sq.
E.O. box. If replacing AP Series speakers, simply remove the APX base and
mount to the Omni-Purpose® bracket. Finish is neutral.
APX40TN
Constant-Directivity Paging Loudspeakers
8k
4k
2k
1k
50°/ 8k
60°/ 4k
60°/ 2k
80°/ 1k
8k
4k
2k
1k
25°/ 8k
45°/ 4k
75°/ 2k
125°/ 1k
* Typical exponential coverage illustrated
APX Beamwidth
Controlled Coverage
Across a Wide Freq. Range
Conventional Beamwidth
Collapsing Coverage
Across a Wide Freq. Range
“X”-tra Value Features
• Rotating Bell • Triple Lock Security
• “Power Stripe” Code • Quality Materials
“X”-tra Easy Installation
• Universal base mounts 1-gang, 2-gang or 4" sq. E.O. boxes.
• 40 watt model includes 30 watt tap @ 70V.
“X”-tra Predictability
• Clear Messaging and Music • Consistent Beamwidth Control
• Fewer Speakers to Provide Quality Communications
Features
• Controlled Coverage of 60˚ x 40˚ Across a Wide
Frequency Range for Predictable Beamwidth Control
• 40 Watt Models For Better Output Over Competitive
15 & 30-Watt Standards
• Triple Lock Horn-to-Base Mounting Method Speeds
Installation and Insures Long-Term Stability
• Rotating Bell Pivots in 15˚ Increments for Exact
On-Site Positioning of Projection Angles Detailed in
Acoustic Simulation Programs
• Rear Cap Includes Partially-Captive Screws (No
Loose Parts) for Swing-Open Access to Power
Taps and Wire Connections. Cap Includes
Knockout for Conduit Connection
• Sturdy Die-Cast Base Includes Provisions for Flex
Conduit and May Be Mounted to 1-gang, 2-gang,
and 4" Square E.O. Boxes, Banded to Poles or
Removed for Easy Retrofit of Existing AP Series
Loudspeakers
• Loudspeaker is Molded of High-Impact, Neutral-
Grey Polycarbonate Resin with UV Light Inhibitor
Preventing Embrittlement or Discoloration
• Universal 25/70/100V Transformer Includes a
Rotary-Dial Selector for Easy Tap Identification
• Speaker Mounting is Backwards Compatible to AP
Series–Simply Remove Base and Mount to Omni-
Purpose® Bracket
APX40TN
AtlasSound.com 800.876.3333
ISO9001
-CERTIFIED-
1601 Jack McKay Blvd.
Ennis, TX 75119
AtlasSound.com
Tech Support 800.876.3333
Printed in the USA
Specifications are subject to change without notice.
© 2004 Atlas Sound LP. Atlas Sound is a trademark of Atlas Sound. All rights reserved.
• Five Year Limited Warranty •
ATS001717 RevA 3/04
00304
484072
Cap and base
have a K.O. for
1
⁄2" flex conduit
Triple Lock Security
Loudspeaker quickly snap-locks to base to allow easy
wiring connections, then secures with screws to with-
stand weather conditions and external forces that,
traditionally, cause sagging or repositioning of the loud-
speaker bell.
❶ Loudspeaker snap-locks to base sleeve
❷ Snap-lock Plastite
® type screw secures assembly
❸ Security cap screw-locks base between cap and
speaker with (2) two screws
Rotating Bell
Lets you respond to
specific coverage
needs quickly in pre-
cise 15˚ increments.
Allows full 360˚
rotation.
1
⁄4" knockouts for flush/
bulkhead mounting.
APX40TN Transformer Power Taps
Switch Impedance Watts Watts Watts
Position (Ohms) @ 25V @ 70.7V @ 100V
1 2,000 - 2.5 5.0
2 1,000 .63 5.0 10.0
3 500 1.25 10.0 20.0
4 250 2.5 20.0 40.0
167 3.75 30.0 X*5
6 125 5.0 40.0 X*
7 62.5 10.0 X* X*
8 31.3 20.0 X* X*
9 15.6 40.0 X* X*
(*Do Not Use)
Frequency (dB) Beamwidth (Degrees)
(Hz) Q Di Horizontal Vertical
500 6 7 120 140
1000 15 12 80 100
2000 26 14 60 60
4000 27 14 60 40
8000 36 16 50 40
Note: All installation methods
should carefully take into
consideration loudspeaker
assembly weight and
environmental conditions.
Multi-purpose base
accepts 1-gang, 2-gang
or 4" Sq.E.O. Boxes
in recessed, surface,
indoor or outdoor
styles.
The base may also
be clamped or band
mounted to poles or
beams, removed for
flush/bulkhead instal
-
lation, or removed
to retrofit existing
speaker installations
with AP Series Omni-
Purpose® mount.
Wire entrance slot may be enlarged with needle nosed
pliers for larger jacketed cables.
Unique rotary dial identifies
and sets the power taps
on the 25/70/100V Xfmr.
Posts and notched barrier provide cable strain relief.
Handy tap
reference
chart
Cap includes par-
tially captive screws
allowing swing-open
access to connec-
tions without loosing
hardware.
POWER NOMINAL SOUND LEVEL DIS-
MODEL RATING FREQ. *PEAK **RP/1M, 1W/1M PERSION IMPEDANCE DIMENSIONS WEIGHT
APX40TN 40 Watts 400 124dB 120, 107dB 60° x 40° *** 14 1/2”W 6 lbs.
7500Hz 500-5000 Hz (±5dB) 10 1/4” H 2.7 kg
13 1/4”D

Termékspecifikációk

Márka: Atlas Sound
Kategória: hangszóró
Modell: APX40TN

Szüksége van segítségre?

Ha segítségre van szüksége Atlas Sound APX40TN, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek


Útmutatók hangszóró Atlas Sound

Atlas Sound

Atlas Sound IP-8SM Útmutató

29 December 2024
Atlas Sound

Atlas Sound IP-SDM Útmutató

19 Augusztus 2024
Atlas Sound

Atlas Sound M1000-W Útmutató

19 Augusztus 2024
Atlas Sound

Atlas Sound I8SM+ Útmutató

19 Augusztus 2024
Atlas Sound

Atlas Sound PM8GD-B Útmutató

19 Augusztus 2024
Atlas Sound

Atlas Sound SMA-15 Útmutató

19 Augusztus 2024
Atlas Sound

Atlas Sound GD87W Útmutató

19 Augusztus 2024
Atlas Sound

Atlas Sound DT22 Útmutató

19 Augusztus 2024
Atlas Sound

Atlas Sound All Weather SM63T Útmutató

19 Augusztus 2024
Atlas Sound

Atlas Sound PM8SUB Útmutató

19 Augusztus 2024

Útmutatók hangszóró

Legújabb útmutatók hangszóró

Match

Match UP C42BMW-FRT.3 Útmutató

3 Április 2025
Turbosound

Turbosound PQ12-SB Útmutató

3 Április 2025
Trust

Trust Tytan GXT 658 Útmutató

3 Április 2025
Turbosound

Turbosound PQ15-YB Útmutató

3 Április 2025
Klipsch

Klipsch Synergy KSB-S1 Útmutató

3 Április 2025
Klipsch

Klipsch Synergy KSF-10.5 Útmutató

3 Április 2025
Klipsch

Klipsch kO-R1 Útmutató

3 Április 2025
Klipsch

Klipsch Synergy SB-1 Útmutató

3 Április 2025
Klipsch

Klipsch Reference RB-5 II Útmutató

3 Április 2025
Klipsch

Klipsch Contractor CS-800-R Útmutató

3 Április 2025