Használati útmutató Asrock H170 Pro4/Hyper
Olvassa el alább 📖 a magyar nyelvű használati útmutatót Asrock H170 Pro4/Hyper (85 oldal) a alaplap kategóriában. Ezt az útmutatót 5 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra
Oldal 1/85
Version 1.0
Published December 2015
Copyright©2015 ASRock INC. All rights reserved.
Copyright Notice:
No part of this documentation may be reproduced, transcribed, transmitted, or
translated in any language, in any form or by any means, except duplication of
documentation by the purchaser for backup purpose, without written consent of
ASRock Inc.
Products and corporate names appearing in this documentation may or may not
be registered trademarks or copyrights of their respective companies, and are used
only for identication or explanation and to the owners’ benet, without intent to
infringe.
Disclaimer:
Specications and information contained in this documentation are furnished for
informational use only and subject to change without notice, and should not be
constructed as a commitment by ASRock. ASRock assumes no responsibility for
any errors or omissions that may appear in this documentation.
With respect to the contents of this documentation, ASRock does not provide
warranty of any kind, either expressed or implied, including but not limited to
the implied warranties or conditions of merchantability or tness for a particular
purpose.
In no event shall ASRock, its directors, ocers, employees, or agents be liable for
any indirect, special, incidental, or consequential damages (including damages for
loss of prots, loss of business, loss of data, interruption of business and the like),
even if ASRock has been advised of the possibility of such damages arising from any
defect or error in the documentation or product.
is device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
CALIFORNIA, USA ONLY
e Lithium battery adopted on this motherboard contains Perchlorate, a toxic substance
controlled in Perchlorate Best Management Practices (BMP) regulations passed by the
California Legislature. When you discard the Lithium battery in California, USA, please
follow the related regulations in advance.
“Perchlorate Material-special handling may apply, see www.dtsc.ca.gov/hazardouswaste/
perchlorate”
ASRock Website: http://www.asrock.com
AUSTRALIA ONLY
Our goods come with guarantees that cannot be excluded under the Australian Consumer
Law. You are entitled to a replacement or refund for a major failure and compensation for
any other reasonably foreseeable loss or damage caused by our goods. You are also entitled
to have the goods repaired or replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure. If you require assistance please call ASRock Tel
: +886-2-28965588 ext.123 (Standard International call charges apply)
e terms HDMI™ and HDMI High-Denition Multimedia Interface, and the HDMI
logo are trademarks or registered trademarks of HDMI Licensing LLC in the United
States and other countries.
Contents
Chapter 1 Introduction 1
1.1 Package Contents 1
1.2 Specications 2
1.3 Motherboard Layout 6
1.4 I/O Panel 8
Chapter 2 Installation 10
2.1 Installing the CPU 11
2.2 Installing the CPU Fan and Heatsink 14
2.3 Installing Memory Modules (DIMM) 15
2.4 Expansion Slots (PCI Express Slots) 17
2.5 Jumpers Setup 18
2.6 Onboard Headers and Connectors 19
2.7 CrossFireXTM and Quad CrossFireXTM Operation Guide 24
2.8 M.2_SSD (NGFF) Module Installation Guide 27
Chapter 3 Software and Utilities Operation 30
3.1 Installing Drivers 30
3.2 A-Tuning 31
3.3 ASRock Live Update & APP Shop 35
3.3.1 UI Overview 35
3.3.2 Apps 36
3.3.3 BIOS & Drivers 39
3.3.4 Setting 40
3.4 Enabling USB Ports for Windows® 7 Installation 41
Chapter 4 UEFI SETUP UTILITY 44
4.1 Introduction 44
4.2 EZ Mode 45
4.3 Advanced Mode 46
4.3.1 UEFI Menu Bar 46
4.3.2 Navigation Keys 47
4.4 Main Screen 48
4.5 OC Tweaker Screen 49
4.6 Advanced Screen 58
4.6.1 CPU Conguration 59
4.6.2 Chipset Conguration 61
4.6.3 Storage Conguration 63
4.6.4 Super IO Conguration 64
4.6.5 ACPI Conguration 65
4.6.6 USB Conguration 67
4.6.7 Trusted Computing 68
4.7 Tools 69
4.8 Hardware Health Event Monitoring Screen 73
4.9 Security Screen 75
4.10 Boot Screen 76
4.11 Exit Screen 79
1
English
H170 Pro4/Hyper
Chapter 1 Introduction
ank you for purchasing ASRock H170 Pro4/Hyper motherboard, a reliable
motherboard produced under ASRock’s consistently stringent quality control.
It delivers excellent performance with robust design conforming to ASRock’s
commitment to quality and endurance.
In this documentation, Chapter 1 and 2 contains the introduction of the
motherboard and step-by-step installation guides. Chapter 3 contains the operation
guide of the soware and utilities. Chapter 4 contains the conguration guide of
the BIOS setup.
1.1 Package Contents
ASRock H170 Pro4/Hyper Motherboard (ATX Form Factor)
ASRock H170 Pro4/Hyper Quick Installation Guide
ASRock H170 Pro4/Hyper Support CD
2 x Serial ATA (SATA) Data Cables (Optional)
1 x I/O Panel Shield
1 x Screw for M.2 Socket
Because the motherboard specications and the BIOS soware might be updated, the
content of this documentation will be subject to change without notice. In case any
modications of this documentation occur, the updated version will be available on
ASRock’s website without further notice. If you require technical support related to
this motherboard, please visit our website for specic information about the model
you are using. You may nd the latest VGA cards and CPU support list on ASRock’s
website as well. ASRock website http://www.asrock.com.
2
English
1.2 Specications
Platform • ATX Form Factor
• High Density Glass Fabric PCB
CPU • Supports 6th Generation Intel® Core
TM i7/i5/i3/Pentium®/
Celeron® Processors (Socket 1151)
• Digi Power design
• 10 Power Phase design
• Supports Intel® Turbo Boost 2.0 Technology
• Supports ASRock BCLK Full-range Overclocking
• Supports ASRock Hyper BCLK Engine
Chipset • Intel® H170
• Supports Intel® Small Business Advantage 4.0
Memory • Dual Channel DDR4 Memory Technology
• 4 x DDR4 DIMM Slots
• Supports DDR4 2133 non-ECC, un-buered memory
• Max. capacity of system memory: 64GB
• Supports Intel® Extreme Memory Prole (XMP) 2.0
Expansion
Slot
• 2 x PCI Express 3.0 x16 Slots (PCIE2: x16 mode; PCIE4: p7-x4
mode)*
* Supports NVMe SSD as boot disks
• 3 x PCI Express 3.0 p7-x1 Slots (Flexible PCIe)
• Supports AMD Quad CrossFireXTM and CrossFireXTM
Graphics • Intel® HD Graphics Built-in Visuals and the VGA outputs
can be supported only with processors which are GPU
integrated.
• Supports Intel® HD Graphics Built-in Visuals : Intel® Quick
Sync Video with AVC, MVC (S3D) and MPEG-2 Full
HW Encode1, Intel® InTru
TM 3D, Intel® Clear Video HD
Technology, Intel® Insider
TM, Intel® HD Graphics 510/530
• Pixel Shader 5.0, DirectX 12
• Max. shared memory 1792MB
• Dual graphics output: Support DVI-D and HDMI ports by
independent display controllers
3
English
H170 Pro4/Hyper
• Supports HDMI with max. resolution up to 4K x 2K
(4096x2160) @ 24Hz / (3840x2160) @ 30Hz
• Supports DVI-D with max. resolution up to 1920x1200 @
60Hz
• Supports Auto Lip Sync, Deep Color (12bpc), xvYCC and
HBR (High Bit Rate Audio) with HDMI Port (Compliant
HDMI monitor is required)
• Supports Accelerated Media Codecs: HEVC, VP8, VP9
• Supports HDCP with DVI-D and HDMI Ports
• Supports Full HD 1080p Blu-ray (BD) playback with DVI-D
and HDMI Ports
Audio • 7.1 CH HD Audio with Content Protection (Realtek ALC892
Audio Codec)
• Premium Blu-ray Audio support
• Supports Surge Protection (ASRock Full Spike Protection)
• ELNA Audio Caps
LAN • Gigabit LAN 10/100/1000 Mb/s
• Giga PHY Intel® I219V
• Supports Wake-On-LAN
• Supports Lightning/ESD Protection (ASRock Full Spike
Protection)
• Supports Energy Ecient Ethernet 802.3az
• Supports PXE
Rear Panel
I/O
• 1 x PS/2 Mouse/Keyboard Port
• 1 x DVI-D Port
• 1 x HDMI Port
• 6 x USB 3.0 Ports (Supports ESD Protection (ASRock Full
Spike Protection))
• 1 x RJ-45 LAN Port with LED (ACT/LINK LED and SPEED
LED)
• HD Audio Jacks: Side Speaker / Rear Speaker / Central / Bass
/ Line in / Front Speaker / Microphone
4
English
Storage • 6 x SATA3 6.0 Gb/s Connectors by Intel® H170, support
RAID (RAID 0, RAID 1, RAID 5, RAID 10, Intel Rapid
Storage Technology 14 and Intel Smart Response
Technology), NCQ, AHCI and Hot Plug
• 1 x SATA Express 10 Gb/s Connector*
* Support to be announced
* If M2_1 is occupied by a SATA-type M.2 device, SATA3_0 and
SATA3_1 will be disabled.
• 1 x Ultra M.2 Socket, supports type
2230/2242/2260/2280/22110 M.2 SATA3 6.0 Gb/s module
and M.2 PCI Express module up to Gen3 p9-x4 (32 Gb/s)**
** Supports NVMe SSD as boot disks
** Supports ASRock U.2 Kit
Connector • 1 x COM Port Header
• 1 x Chassis Intrusion Header
• 1 x TPM Header
• 1 x Power LED and Speaker Header
• 1 x CPU Fan Connector (4-pin) (Smart Fan Speed Control)
• 3 x Chassis Fan Connectors (2 x 4-pin, 1 x 3-pin) (Smart Fan
Speed Control)
* CPU_FAN1 and CHA_FAN1 can auto detect if 3-pin or 4-pin
fan is in use.
* e CPU Fan Connector supports the CPU fan of maximum
1A (12W) fan power.
• 1 x 24 pin ATX Power Connector
• 1 x 8 pin 12V Power Connector
• 1 x PCIe Power Connector
• 1 x Front Panel Audio Connector
• 2 x USB 2.0 Headers (Support 4 USB 2.0 ports) (Supports
ESD Protection (ASRock Full Spike Protection))
• 1 x USB 3.0 Header (Supports 2 USB 3.0 ports) (Supports
ESD Protection (ASRock Full Spike Protection))
BIOS
Feature
• AMI UEFI Legal BIOS with multilingual GUI support
• ACPI 5.0 Compliant wake up events
• SMBIOS 2.7 Support
• CPU, GT_CPU, DRAM, VPPM, PCH 1.0V, VCCIO, VC-
CPLL, VCCSA Voltage Multi-adjustment
5
English
H170 Pro4/Hyper
Hardware
Monitor
• CPU/Chassis temperature sensing
• CPU/Chassis Fan Tachometer
• CPU/Chassis Quiet Fan (Auto adjust chassis fan speed by
CPU temperature)
• CPU/Chassis Fan multi-speed control
• CASE OPEN detection
• Voltage monitoring: +12V, +5V, +3.3V, CPU Vcore, GT_CPU,
DRAM, VPPM, PCH 1.0V, VCCIO, VCCSA
OS • Microso® Windows® 10 64-bit / 8.1 64-bit / 7 32-bit / 7 64-
bit
* To install Windows® 7 OS, a modied installation disk with
xHCI drivers packed into the ISO le is required. Please refer to
page 41 for more detailed instructions.
* For the updated Windows® 10 driver, please visit ASRock’s
website for details: http://www.asrock.com
Certica-
tions
• FCC, CE, WHQL
• ErP/EuP Ready (ErP/EuP ready power supply is required)
Please realize that there is a certain risk involved with overclocking, including
adjusting the setting in the BIOS, applying Untied Overclocking Technology, or using
third-party overclocking tools. Overclocking may aect your system’s stability, or
even cause damage to the components and devices of your system. It should be done
at your own risk and expense. We are not responsible for possible damage caused by
overclocking.
* For detailed product information, please visit our website:
http://www.asrock.com
6
English
1.3 Motherboard Layout
Intel
H170
DD R4_A2 (64 bit , 288-p in modu le)
DDR4_A1 (64 bit, 288-pin module )
DDR4_B2 (64 bit, 288-pin module )
DDR4_B1 (64 bit, 288-pin module )
ATX1 2V 1
USB 3 .0
T: USB1
B: USB2
ATXP WR1
PCIE2
Top:
RJ-4 5
USB 3.0
T: US B5
B: USB6
PCIE4
HDLE D RESET
PLED PWRBTN
PANEL1
1
USB _1_ 2
1
1
SPK _PLE D1
COM 1
1
1
HD_ AUD IO 1
H170 Pro4/Hyper
PCIE1
RoHS
HDMI1
DVI1
USB 3. 0
T: USB 3
B: USB 4
Ult ra M.2
PCI e Gen3 x4
PS2
Ke yb oa rd
/Mou se
CMOS
Battery
CLR MOS1
1
PCIE3
M2_1
CT2CT3CT4CT5
US B3_ 7_ 8
1
CPU _FAN1
USB _3_ 4
1
1
TPM S1
PCIE5
CT1
PCI Express 3.0
Front USB 3.0
CHA _FAN2
BIOS
ROM
Top:
SIDE SP K
Cent er:
REAR SP K
Bott om:
CTR B ASS
Top:
LINE IN
Cent er:
FRON T
Bott om:
MIC I N
PC IE_ PW R1
CHA _FAN3
SATA3_1
SATA3_0
SATA3_5 SATA3_4
SATA3_3 SATA3_2
CHA _FAN1
CI1
1
SATA_EXP 0
7
English
H170 Pro4/Hyper
No. Description
1 ATX 12V Power Connector (ATX12V1)
2 2 x 288-pin DDR4 DIMM Slots (DDR4_A1, DDR4_B1)
3 2 x 288-pin DDR4 DIMM Slots (DDR4_A2, DDR4_B2)
4 ATX Power Connector (ATXPWR1)
5 USB 3.0 Header (USB3_7_8)
6 SATA3 Connector (SATA3_0)
7 SATA3 Connector (SATA3_1)
8 CPU Fan Connector (CPU_FAN1)
9 SATA3 Connector (SATA3_5)
10 SATA3 Connector (SATA3_4)
11 SATA3 Connector (SATA3_2)
12 System Panel Header (PANEL1)
13 SATA3 Connector (SATA3_3)
14 Power LED and Speaker Header (SPK_PLED1)
15 SATA Express Connector (SATA_EXP0)
16 Chassis Fan Connector (CHA_FAN2)
17 Chassis Fan Connector (CHA_FAN1)
18 USB 2.0 Header (USB_3_4)
19 USB 2.0 Header (USB_1_2)
20 Chassis Intrusion Header (CI1)
21 TPM Header (TPMS1)
22 COM Port Header (COM1)
23 Front Panel Audio Header (HD_AUDIO1)
24 Clear CMOS Jumper (CLRMOS1)
25 Chassis Fan Connector (CHA_FAN3)
26 PCIe Power Connector (PCIE_PWR1)
8
English
1.4 I/O Panel
No. Description No. Description
1 PS/2 Mouse/Keyboard Port 8 Central / Bass (Orange)
2 LAN RJ-45 Port* 9 USB 3.0 Ports (USB3_5_6)
3 Side Speaker (Gray) 10 USB 3.0 Ports (USB3_3_4)
4 Rear Speaker (Black) 11 DVI-D Port
5 Line In (Light Blue) 12 HDMI Port
6 Front Speaker (Lime)** 13 USB 3.0 Ports (USB3_1_2)
7 Microphone (Pink)
13 78912 11
4
3
6
5
1 2
10
10
English
is is an ATX form factor motherboard. Before you install the motherboard, study
the conguration of your chassis to ensure that the motherboard ts into it.
Pre-installation Precautions
Take note of the following precautions before you install motherboard components
or change any motherboard settings.
• Make sure to unplug the power cord before installing or removing the motherboard
components. Failure to do so may cause physical injuries and damages to motherboard
components.
• In order to avoid damage from static electricity to the motherboard’s components,
NEVER place your motherboard directly on a carpet. Also remember to use a grounded
wrist strap or touch a safety grounded object before you handle the components.
• Hold components by the edges and do not touch the ICs.
• Whenever you uninstall any components, place them on a grounded anti-static pad or
in the bag that comes with the components.
• When placing screws to secure the motherboard to the chassis, please do not over-
tighten the screws! Doing so may damage the motherboard.
Chapter 2 Installation
11
English
H170 Pro4/Hyper
2.1 Installing the CPU
1. Before you insert the 1151-Pin CPU into the socket, please check if the PnP cap
is on the socket, if the CPU surface is unclean, or if there are any in the bent pins
socket. Do not force to insert the CPU into the socket if above situation is found.
Otherwise, the CPU will be seriously damaged.
2. Unplug all power cables before installing the CPU.
1
2
A
B
Termékspecifikációk
| Márka: | Asrock |
| Kategória: | alaplap |
| Modell: | H170 Pro4/Hyper |
Szüksége van segítségre?
Ha segítségre van szüksége Asrock H170 Pro4/Hyper, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók alaplap Asrock
25 Március 2025
13 Január 2025
13 Január 2025
12 Január 2025
2 Január 2025
28 December 2024
14 Október 2024
10 Október 2024
4 Október 2024
3 Október 2024
Útmutatók alaplap
- alaplap Sharkoon
- alaplap Gigabyte
- alaplap Asus
- alaplap Supermicro
- alaplap Biostar
- alaplap MSI
- alaplap NZXT
- alaplap ECS
- alaplap Evga
- alaplap Intel
- alaplap Foxconn
- alaplap Advantech
- alaplap Elitegroup
- alaplap EPoX
Legújabb útmutatók alaplap
9 Április 2025
9 Április 2025
3 Április 2025
3 Április 2025
3 Április 2025
3 Április 2025
2 Április 2025
2 Április 2025
31 Március 2025
27 Március 2025