Használati útmutató Asrock FATAL1TY B85 KILLER
Olvassa el alább 📖 a magyar nyelvű használati útmutatót Asrock FATAL1TY B85 KILLER (151 oldal) a alaplap kategóriában. Ezt az útmutatót 5 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra
Oldal 1/151
Version 1.0
Published November 2013
Copyright©2013 ASRock INC. All rights reserved.
Copyright Notice:
No part of this documentation may be reproduced, transcribed, transmitted, or
translated in any language, in any form or by any means, except duplication of
documentation by the purchaser for backup purpose, without written consent of
ASRock Inc.
Products and corporate names appearing in this documentation may or may not
be registered trademarks or copyrights of their respective companies, and are used
only for identication or explanation and to the owners’ benet, without intent to
infringe.
Disclaimer:
Specications and information contained in this documentation are furnished for
informational use only and subject to change without notice, and should not be
constructed as a commitment by ASRock. ASRock assumes no responsibility for
any errors or omissions that may appear in this documentation.
With respect to the contents of this documentation, ASRock does not provide
warranty of any kind, either expressed or implied, including but not limited to
the implied warranties or conditions of merchantability or tness for a particular
purpose.
In no event shall ASRock, its directors, ocers, employees, or agents be liable for
any indirect, special, incidental, or consequential damages (including damages for
loss of prots, loss of business, loss of data, interruption of business and the like),
even if ASRock has been advised of the possibility of such damages arising from any
defect or error in the documentation or product.
is device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
CALIFORNIA, USA ONLY
e Lithium battery adopted on this motherboard contains Perchlorate, a toxic substance
controlled in Perchlorate Best Management Practices (BMP) regulations passed by the
California Legislature. When you discard the Lithium battery in California, USA, please
follow the related regulations in advance.
“Perchlorate Material-special handling may apply, see www.dtsc.ca.gov/hazardouswaste/
perchlorate”
ASRock Website: http://www.asrock.com
e terms HDMI™ and HDMI High-Denition Multimedia Interface, and the HDMI
logo are trademarks or registered trademarks of HDMI Licensing LLC in the United
States and other countries.
Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380; 6,487,535;
7,003,467 & other U.S. and worldwide patents issued & pending. DTS, the Symbol, &
DTS and the Symbol together is a registered trademark & DTS Connect, DTS Interactive,
DTS Neo:PC are trademarks of DTS, Inc. Product includes soware.
© DTS, Inc., All Rights Reserved.
Who knew that at age 19, I would be a World Champion PC gamer. When I was 13, I actually
played competitive billiards in professional tournaments and won four or ve games o guys
who played at the highest level. I actually thought of making a career of it, but at that young
age situations change rapidly. Because I’ve been blessed with great hand-eye coordination and
a grasp of mathematics (an important element in video gaming) I gravitated to that activity.
GOING PRO
I started professional gaming in 1999 when I entered the CPL (Cyberathlete Professional
League) tournament in Dallas and won $4,000 for coming in third place. Emerging as one
of the top players in the United States, a company interested in sponsoring me ew me to
Sweden to compete against the top 12 players in the world. I won 18 straight games, lost
none, and took rst place, becoming the number one ranked Quake III player in the world
in the process. Two months later I followed that success by traveling to Dallas and defending
my title as the world’s best Quake III player, winning the $40,000 grand prize. From there
I entered competitions all over the world, including Singapore, Korea, Germany, Australia,
Holland and Brazil in addition to Los Angeles, New York and St. Louis.
WINNING STREAK
I was excited to showcase my true gaming skills when defending my title as CPL
Champion of the year at the CPL Winter 2001 because I would be competing in a totally
dierent rst person shooter (fps) game, Alien vs. Predator II. I won that competition and
walked away with a new car. e next year I won the same title playing Unreal Tournament
2003, becoming the only three-time CPL champion of the year. And I did it playing a
different game each year, something no one else has ever done and a feat of which I am
extremely proud.
At QuakeCon 2002, I faced o against my rival ZeRo4 in one of the most highly
anticipated matches of the year, winning in a 14 to (-1) killer victory. Competing at Quakecon
2004, I became the World’s 1st Doom3 Champion by defeating Daler in a series of very
challenging matches and earning $25,000 for the victory.
Since then Fatal1ty has traveled the globe to compete against the best in the world, winning
prizes and acclaim, including the 2005 CPL World Tour Championship in New York City for
a $150,000 rst place triumph. In August 2007, Johnathan was awarded the rst ever Lifetime
Achievement Award in the four year history of the eSports-Award for “showing exceptional
sportsmanship, taking part in shaping eSports into what it is today and for being the prime
representative of this young sport. He has become the gurehead for eSports worldwide”.
Fatal1ty Story
LIVIN’ LARGE
Since my rst big tournament wins, I have been a “Professional Cyberathlete”, traveling the
world and livin’ large with lots of International media coverage on outlets such as MTV,
ESPN and a 60 Minutes segment on CBS to name only a few. It's unreal - it's crazy. I’m living
a dream by playing video games for a living. I’ve always been athletic and took sports like
hockey and football very seriously, working out and training hard. is discipline helps me
become a better gamer and my drive to be the best has opened the doors necessary to become
a professional.
A DREAM
Now, another dream is being realized – building the ultimate gaming computer, made
up of the best parts under my own brand. Quality hardware makes a huge difference in
competitions…a couple more frames per second and everything gets really nice. It’s all about
getting the computer processing faster and allowing more uid movement around the maps.
My vision for Fatal1ty hardware is to allow gamers to focus on the game without worrying
about their equipment, something I’ve preached since I began competing. I don’t want to
worry about my equipment. I want to be there – over and done with - so I can focus on
the game. I want it to be the fastest and most stable computer equipment on the face of the
planet, so quality is what Fatal1ty Brand products represent.
Johnathan “Fatal1ty” Wendel
e Fatal1ty name, Fatal1ty logos and the Fatal1ty likeness are registered trademarks of Fatal1ty, Inc., and are used
under license. © 2013 Fatal1ty, Inc. All rights reserved. All other trademarks are the property of their respective
owners.
1
English
Fatal1ty B85 Killer Series
Motherboard Layout
Intel
B85
DDR 3 _A2 (64 b i t, 24 0-p i n mo d ul e )
DDR 3 _A1 (64 b i t, 24 0-p i n mo d ul e )
DDR 3 _B2 (64 b i t, 24 0-p i n mo d ul e )
DDR 3 _B1 (64 b i t, 24 0-p i n mo d ul e )
ATX 112V
CMOS
Ba ttery
Super
I/ O
USB 2. 0
T: USB0
B: USB 1
PS2
Mo use/
Ke yb oard
ATXP WR1
1
USB 3_2_3
K ril le
E2200
PCIE2
To p:
RJ- 45
US 2.B 0
T: 2US B
B: U SB 3
To p:
Cen t ral/ Bass
Cen t er:
REA R SPK
To p:
LIN E IN
Cen t er:
FRO NT
Bot tom:
Opt ic al
SPD IF
Bot tom:
MIC I N
PCIE4
CLRC M O S1
1
PLED 1
1
1
SP E AK E R 1
HD LED ES ET R
PLED P WRBT N
PAN EL1
1
USB 6_7
1
USB 4_5
1
1
HD_ AU DIO 1
B85 K rille
SA A2 _0T
PCIE1
CHA _FAN1
CHA_ FAN 2CHA_ FAN 3
PCI1
PCI2
Ro HS
7
8
9
10
14
11
12
13
1618192021 17
15
2
CP U_FA N1
CPU_ FAN 2
3 4
6
51
24
22
HDM I 1
FATAL TY1
Pu rity
SoundT M
VGA1
DVI1
PWR _FA N1
SA A2 _1T
SA A3 _2T
SA 3_T A 3
SA 3_T A 0
SA A3 _T 1
PCI3
PCIE3
USB 3. 0
T: USB0
B: USB 1
64Mb
BIO S
23
2
English
No. Description
1 ATX 12V Power Connector (ATX12V1)
2 CPU Fan Connector (CPU_FAN2)
3 CPU Fan Connector (CPU_FAN1)
4 2 x 240-pin DDR3 DIMM Slots (DDR3_A1, DDR3_B1)
5 2 x 240-pin DDR3 DIMM Slots (DDR3_A2, DDR3_B2)
6 ATX Power Connector (ATXPWR1)
7 Power Fan Connector (PWR_FAN1)
8 USB 3.0 Header (USB3_2_3)
9 Power LED Header (PLED1)
10 Chassis Speaker Header (SPEAKER1)
11 System Panel Header (PANEL1)
12 SATA3 Connector (SATA3_0)
13 SATA3 Connector (SATA3_1)
14 SATA3 Connector (SATA3_3)
15 SATA3 Connector (SATA3_2)
16 Chassis Fan Connector (CHA_FAN1)
17 SATA2 Connector (SATA2_1)
18 SATA2 Connector (SATA2_0)
19 USB 2.0 Header (USB4_5)
20 USB 2.0 Header (USB6_7)
21 Clear CMOS Jumper (CLRCMOS1)
22 Front Panel Audio Header (HD_AUDIO1)
23 Chassis Fan Connector (CHA_FAN3)
24 Chassis Fan Connector (CHA_FAN2)
3
English
Fatal1ty B85 Killer Series
I/O Panel
No. No.Description Description
1 Fatal1ty Mouse Port (USB0) 9 Microphone (Pink)
2 USB 2.0 Port (USB1) Optical SPDIF Out Port10
3 USB 2.0 Ports (USB23) D-Sub Port 11
4 LAN RJ-45 Port* USB 3.0 Ports (USB3_0_1)12
5 Central / Bass (Orange) 13 HDMI Port
6 Rear Speaker (Black) 14 DVI-D Port
7 Line In (Light Blue) PS/2 Mouse/Keyboard Port15
8 Front Speaker (Lime)**
1 3 4 6
91015 11121314
5
2
1 7
8
4
English
* ere are two LEDs on each LAN port. Please refer to the table below for the LAN port LED indications.
Activity / Link LED Speed LED
Status StatusDescription Description
O ONo Link 10Mbps connection
Blinking Data Activity Orange 100Mbps connection
On Link Green 1Gbps connection
** If you use a 2-channel speaker, please connect the speaker’s plug into “Front Speaker Jack”. See the table below
for connection details in accordance with the type of speaker you use.
Audio Output
Channels
Front Speaker
(No. 8)
Rear Speaker
(No. 6)
Central / Bass
(No. 5)
Line In
(No. 7)
2V -- -- --
4V V -- --
6V V V --
8V V V V
ACT/LINK LED
SPEED LED
LAN Port
To enable Multi-Streaming, you need to connect a front panel audio cable to the front
panel audio header. Aer restarting your computer, you will nd the “Mixer” tool
on your system. Please select “Mixer ToolBox” , click “Enable playback multi-
streaming”, and click “ok”. Choose “2CH”, “4CH”, “6CH”, or “8CH” and then you are
allowed to select “Realtek HDA Primary output” to use the Rear Speaker, Central/
Bass, and Front Speaker, or select “Realtek HDA Audio 2nd output” to use the front
panel audio.
5
English
Fatal1ty B85 Killer Series
Chapter 1 Introduction
ank you for purchasing ASRock Fatal1ty B85 Killer Series motherboard, a reliable
motherboard produced under ASRock’s consistently stringent quality control.
It delivers excellent performance with robust design conforming to ASRock’s
commitment to quality and endurance.
1.1 Package Contents
• ASRock Fatal1ty B85 Killer Series Motherboard (ATX Form Factor)
• ASRock Fatal1ty B85 Killer Series Quick Installation Guide
• ASRock Fatal1ty B85 Killer Series Support CD
• 2 x Serial ATA (SATA) Data Cables (Optional)
• 1 x I/O Panel Shield
Because the motherboard specications and the BIOS soware might be updated, the
content of this manual will be subject to change without notice. In case any modica-
tions of this manual occur, the updated version will be available on ASRock’s website
without further notice. If you require technical support related to this motherboard,
please visit our website for specic information about the model you are using. You
may nd the latest VGA cards and CPU support list on ASRock’s website as well.
ASRock website http://www.asrock.com.
6
English
1.2 Specications
Platform • ATX Form Factor
• Premium Gold Capacitor design (100% Japan made high
quality conductive polymer capacitors)
A-Style • Purity SoundTM
Gaming
Armor
CPU Power
• Hi-Density Power Connector
VGA Card
• 15μGold Finger in VGA PCIe Slot (PCIE2)
Internet
• Qualcomm® Atheros® KillerTM LAN
Audio
• Purity SoundTM
CPU • Supports 4th generation Intel® CoreTM i7 / i5 / i3 / Xeon® /
Pentium® / Celeron® in LGA1150 package
• Digi Power design
• 6 Power Phase design
• Supports Intel® Turbo Boost 2.0 Technology
Chipset • Intel® B85
• Supports Intel® Small Business Advantage 2.0
Memory • Dual Channel DDR3 Memory Technology
• 4 x DDR3 DIMM Slots
• Supports DDR3 1600/1333/1066 non-ECC, un-buered
memory
• Max. capacity of system memory: 32GB (see CAUTION)
• Supports Intel® Extreme Memory Prole (XMP) 1.3 / 1.2
Expansion
Slot
• 1 x PCI Express 3.0 x16 Slot (PCIE2: x16 mode)
• 1 x PCI Express 2.0 x16 Slot (PCIE4: p10-x4 mode)
• 2 x PCI Express 2.0 p10-x1 Slots
• 3 x PCI Slots
• Supports AMD Quad CrossFireXTM and CrossFireXTM
7
English
Fatal1ty B85 Killer Series
Graphics • Intel® HD Graphics Built-in Visuals and the VGA outputs can
be supported only with processors which are GPU integrated.
• Supports Intel® HD Graphics Built-in Visuals : Intel® Quick
Sync Video with AVC, MVC (S3D) and MPEG-2 Full
HW Encode1, Intel® InTruTM 3D, Intel® Clear Video HD
Technology, Intel® Insider
TM, Intel® HD Graphics 4400/4600
• Pixel Shader 5.0, DirectX 11.1
• Max. shared memory 1792MB
• ree graphics output options: D-Sub, DVI-D and HDMI
• Supports Triple Monitor
• Supports HDMI Technology with max. resolution up to 4K x
2K (4096x2304) @ 24Hz
• Supports DVI-D with max. resolution up to 1920x1200 @
60Hz
• Supports D-Sub with max. resolution up to 1920x1200 @
60Hz
• Supports Auto Lip Sync, Deep Color (12bpc), xvYCC and
HBR (High Bit Rate Audio) with HDMI Port (Compliant
HDMI monitor is required)
• Supports HDCP with DVI-D and HDMI Ports
• Supports Full HD 1080p Blu-ray (BD) playback with DVI-D
and HDMI Ports
Audio • 7.1 CH HD Audio with Content Protection (Realtek ALC1150
Audio Codec)
• Premium Blu-ray Audio support
• Supports Purity SoundTM
- 115dB SNR DAC with Dierential Amplier
- TI® NE5532 Premium Headset Amplier (Supports up to
600 ohm headsets)
- Direct Drive Technology
- EMI Shielding Cover
- PCB Isolate Shielding
• Supports DTS Connect
8
English
LAN • PCIE p12-x1 Gigabit LAN 10/100/1000 Mb/s
• Qualcomm® Atheros® Killer
TM E2200 Series
• Supports Wake-On-LAN
• Supports Energy Ecient Ethernet 802.3az
• Supports PXE
Rear Panel
I/O
• 1 x PS/2 Mouse/Keyboard Port
• 1 x D-Sub Port
• 1 x DVI-D Port
• 1 x HDMI Port
• 1 x Optical SPDIF Out Port
• 3 x USB 2.0 Ports
• 1 x Fatal1ty Mouse Port (USB 2.0)
• 2 x USB 3.0 Ports
• 1 x RJ-45 LAN Port with LED (ACT/LINK LED and SPEED
LED)
• HD Audio Jack: Rear Speaker / Central / Bass / Line in / Front
Speaker / Microphone
Storage • 4 x SATA3 6.0 Gb/s Connectors, support NCQ, AHCI and
Hot Plug
• 2 x SATA2 3.0 Gb/s Connectors, support NCQ, AHCI and
Hot Plug
Connector • 1 x Power LED Header
• 2 x CPU Fan Connectors (1 x 4-pin, 1 x 3-pin)
• 3 x Chassis Fan Connectors (1 x 4-pin, 2 x 3-pin)
• 1 x Power Fan Connector (3-pin)
• 1 x 24 pin ATX Power Connector
• 1 x 8 pin 12V Power Connector (Hi-Density Power
Connector)
• 1 x Front Panel Audio Connector
• 2 x USB 2.0 Headers (Support 4 USB 2.0 ports)
• 1 x USB 3.0 Header (Supports 2 USB 3.0 ports)
BIOS
Feature
• 64Mb AMI UEFI Legal BIOS with multilingual GUI support
• ACPI 1.1 Compliant wake up events
• SMBIOS 2.3.1 support
• CPU, DRAM, PCH 1.05V, PCH 1.5V Voltage multi-adjust-
ment
9
English
Fatal1ty B85 Killer Series
Support
CD
• Drivers, Utilities, AntiVirus Soware (Trial Version), Google
Chrome Browser and Toolbar, Start8 (30 days trial), XSplit,
Killer Network Manager
Hardware
Monitor
• CPU/Chassis temperature sensing
• CPU/Chassis/Power Fan Tachometer
• CPU/Chassis Quiet Fan (Auto adjust chassis fan speed by
CPU temperature)
• CPU/Chassis Fan multi-speed control
• Voltage monitoring: +12V, +5V, +3.3V, CPU Vcore
OS • Microso® Windows® 8.1 32-bit / 8.1 64-bit / 8 32-bit / 8 64-
bit / 7 32-bit / 7 64-bit
Certica-
tions
• FCC, CE, WHQL
• ErP/EuP Ready (ErP/EuP ready power supply is required)
* For detailed product information, please visit our website:
http://www.asrock.com
Please realize that there is a certain risk involved with overclocking, including adjust-
ing the setting in the BIOS, applying Untied Overclocking Technology, or using third-
party overclocking tools. Overclocking may aect your system’s stability, or even cause
damage to the components and devices of your system. It should be done at your own
risk and expense. We are not responsible for possible damage caused by overclocking.
Due to limitation, the actual memory size may be less than 4GB for the reservation
for system usage under Windows® 32-bit operating systems. Windows® 64-bit operat-
ing systems do not have such limitations. You can use ASRock XFast RAM to utilize
the memory that Windows® cannot use.
10
English
1.3 Unique Features
ASRock F-Stream
F-Stream is ASRock’s multi purpose soware suite with a new interface, more new
features and improved utilities, including XFast RAM, Dehumidier, Good Night
LED, FAN-Tastic Tuning, OC Tweaker and a whole lot more.
ASRock Instant Flash
ASRock Instant Flash is a BIOS ash utility embedded in Flash ROM. is conve-
nient BIOS update tool allows you to update the system BIOS in a few clicks without
preparing an additional oppy diskette or other complicated ash utility. Just save
the new BIOS le to your USB storage and launch this tool by pressing <F6> or
<F2> during POST to enter the BIOS setup menu to access ASRock Instant Flash.
Please be noted that the USB ash drive or hard drive must use FAT32/16/12 le
system.
ASRock APP Charger
Simply by installing the ASRock APP Charger makes your iPhone/iPad/iPod Touch
charge up to 40% faster than before on your computer. ASRock APP Charger allows
you to quickly charge many Apple devices simultaneously and even supports
continuous charging when your PC enters into Standby mode (S1), Suspend to RAM
(S3), hibernation mode (S4) or power o (S5).
ASRock XFast RAM
ASRock XFast RAM is included in F-Stream. It fully utilizes the memory space that
cannot be used under Windows® 32-bit operating systems. ASRock XFast RAM
shortens the loading time of previously visited websites, making web surng faster
than ever. And it also boosts the speed of Adobe Photoshop 5 times faster. Another
advantage of ASRock XFast RAM is that it reduces the frequency of accessing your
SSDs or HDDs in order to extend their lifespan.
ASRock Crashless BIOS
ASRock Crashless BIOS allows users to update their BIOS without fear of failing. If
power loss occurs during the BIOS updating process, ASRock Crashless BIOS will
automatically nish the BIOS update procedure aer regaining power. Please note
that BIOS les need to be placed in the root directory of your USB disk. Only USB 2.0
ports support this feature.
11
English
Fatal1ty B85 Killer Series
ASRock OMG (Online Management Guard)
Administrators are able to establish an internet curfew or restrict internet access
at specied times via OMG. You may schedule the starting and ending hours of
internet access granted to other users. In order to prevent users from bypassing
OMG, guest accounts without permission to modify the system time are required.
ASRock Internet Flash
ASRock Internet Flash downloads and updates the latest UEFI rmware version
from our servers for you without entering Windows ®
OS. Please setup network
conguration before using Internet Flash.
ASRock System Browser
ASRock System Browser shows the overview of your current PC and the devices
connected.
ASRock Dehumidier Function
Users may prevent motherboard damages due to dampness by enabling
“Dehumidier Function”. When enabling Dehumidier Function, the computer
will power on automatically to dehumidify the system aer entering S4/S5 state.
ASRock Interactive UEFI
ASRock Interactive UEFI is a blend of system conguration tools, cool sound eects
and stunning visuals. e unprecedented UEFI provides a more attractive interface
and more amusment.
ASRock Fast Boot
With ASRock’s exclusive Fast Boot technology, it takes less than 1.5 seconds to
logon to Windows 8 from a cold boot. No more waiting! e speedy boot will
completely change your user experience and behavior.
ASRock Restart to UEFI
Windows® 8 brings the ultimate boot up experience. e lightning boot up speed
makes it hard to access the UEFI setup. ASRock Restart to UEFI allows users to
enter the UEFI automatically when turning on the PC. By enabling this function,
the PC will enter the UEFI directly aer you restart.
12
English
ASRock Good Night LED
ASRock Good Night LED technology oers you a better sleeping environment by
extinguishing the unessential LEDs. By enabling Good Night LED in the BIOS, the
Power/HDD LEDs will be switched o when the system is powered on. Good Night
LED will automatically switch o the Power and Keyboard LEDs when the system
enters into Standby/Hibernation mode as well.
ASRock USB Key
In a world where time is money, why waste precious time everyday typing
usernames to log in to Windows? Why should we even bother memorizing those
foot long passwords? Just plug in the USB Key and let your computer log in to
windows automatically!
ASRock Key Master
What good is a weapon if you are unable to wield it prociently? Key Master
enhances your mouse and keyboard with customizable macros, sniper modes, scroll
speed, key repeat rates and repeat delay, turning your boring old keyboard and
mouse into lethal weapons.
ASRock FAN-Tastic Tuning
ASRock FAN-Tastic Tuning is included in . Congure up to ve dierent F-Stream
fan speeds using the graph. e fans will automatically shi to the next speed level
when the assigned temperature is met.
ASRock Easy Driver Installer
For users that don’t have an optical disk drive to install the drivers from our support
CD, Easy Driver Installer is a handy tool in the UEFI that installs the LAN driver
to your system via an USB storage device, then downloads and installs the other
required drivers automatically.
13
English
Fatal1ty B85 Killer Series
is is an ATX form factor motherboard. Before you install the motherboard, study
the conguration of your chassis to ensure that the motherboard ts into it.
Pre-installation Precautions
Take note of the following precautions before you install motherboard components
or change any motherboard settings.
• Make sure to unplug the power cord before installing or removing the motherboard.
Failure to do so may cause physical injuries to you and damages to motherboard
components.
• In order to avoid damage from static electricity to the motherboard’s components,
NEVER place your motherboard directly on a carpet. Also remember to use a grounded
wrist strap or touch a safety grounded object before you handle the components.
• Hold components by the edges and do not touch the ICs.
• Whenever you uninstall any components, place them on a grounded anti-static pad or
in the bag that comes with the components.
• When placing screws to secure the motherboard to the chassis, please do not over-
tighten the screws! Doing so may damage the motherboard.
Chapter 2 Installation
14
English
2.1 Installing the CPU
1. Before you insert the 1150-Pin CPU into the socket, please check if the is on PnP cap
the socket, if the CPU surface is unclean, or if there are any in the socket. bent pins
Do not force to insert the CPU into the socket if above situation is found. Otherwise,
the CPU will be seriously damaged.
2. Unplug all power cables before installing the CPU.
2
1
A
B
15
English
Fatal1ty B85 Killer Series
4
5
3
16
English
Please save and replace the cover if the processor is removed. e cover must be placed
if you wish to return the motherboard for aer service.
17
English
Fatal1ty B85 Killer Series
2.2 Installing the CPU Fan and Heatsink
1 2
CPU_FAN
18
English
2.3 Installing Memory Modules (DIMM)
is motherboard provides four 240-pin DDR3 (Double Data Rate 3) DIMM slots,
and supports Dual Channel Memory Technology.
Dual Channel Memory Conguration
e DIMM only ts in one correct orientation. It will cause permanent damage to
the motherboard and the DIMM if you force the DIMM into the slot at incorrect
orientation.
Priority DDR3_A1 DDR3_A2 DDR3_B1 DDR3_B2
1Populated Populated
2Populated Populated
3Populated Populated Populated Populated
1. For dual channel conguration, you always need to install identical (the same
brand, speed, size and chip-type) DDR3 DIMM pairs.
2. It is unable to activate Dual Channel Memory Technology with only one or three
memory module installed.
3. It is not allowed to install a DDR or DDR2 memory module into a DDR3 slot;
otherwise, this motherboard and DIMM may be damaged.
19
English
Fatal1ty B85 Killer Series
1
2
3
20
English
2.4 Expansion Slots (PCI and PCI Express Slots)
ere are 3 PCI slots and 4 PCI Express slots on the motherboard.
PCI slot:
e PCI1, PCI2 and PCI3 slots are used to install expansion cards that have 32-bit
PCI interface.
PCIe slots:
PCIE1 (PCIe 2.0 p24-x1 slots) is used for PCI Express p24-x1 lane width cards.
PCIE2 (PCIe 3.0 x16 slot) is used for PCI Express x16 lane width graphics cards.
PCIE3 (PCIe 2.0 p24-x1 slots) is used for PCI Express p24-x1 lane width cards.
PCIE4 (PCIe 2.0 x16 slot) is used for PCI Express p24-x4 lane width graphics cards
PCIe Slot Congurations
PCIE2 PCIE4
Single Graphics Card x16 N/A
Two Graphics Cards in
CrossFireX TM Mode x16 x4
For a better thermal environment, please connect a chassis fan to the motherboard’s
chassis fan connector (CHA_FAN1, CHA_FAN2 or CHA_ FAN3) when using mul-
tiple graphics cards.
Before installing an expansion card, please make sure that the power supply is
switched o or the power cord is unplugged. Please read the documentation of the
expansion card and make necessary hardware settings for the card before you start
the installation.
21
English
Fatal1ty B85 Killer Series
2.5 Jumpers Setup
e illustration shows how jumpers are setup. When the jumper cap is placed on
the pins, the jumper is “Short”. If no jumper cap is placed on the pins, the jumper
is “Open”. e illustration shows a 3-pin jumper whose pin1 and pin2 are “Short”
when a jumper cap is placed on these 2 pins.
Clear CMOS Jumper
(CLRCMOS1)
(see p.1, No. 16)
CLRCMOS1 allows you to clear the data in CMOS. To clear and reset the system
parameters to default setup, please turn o the computer and unplug the power
cord from the power supply. Aer waiting for 15 seconds, use a jumper cap to
short pin2 and pin3 on CLRCMOS1 for 5 seconds. However, please do not clear
the CMOS right aer you update the BIOS. If you need to clear the CMOS when
you just nish updating the BIOS, you must boot up the system rst, and then shut
it down before you do the clear-CMOS action. Please be noted that the password,
date, time, and user default prole will be cleared only if the CMOS battery is
removed.
Clear CMOSDefault
22
English
2.6 Onboard Headers and Connectors
System Panel Header
(9-pin PANEL1)
(see p.1, No. 11)
Connect the power
switch, reset switch and
system status indicator on
the chassis to this header
according to the pin
assignments below. Note
the positive and negative
pins before connecting
the cables.
PWRBTN (Power Switch):
Connect to the power switch on the chassis front panel. You may congure the way to
turn o your system using the power switch.
RESET (Reset Switch):
Connect to the reset switch on the chassis front panel. Press the reset switch to restart
the computer if the computer freezes and fails to perform a normal restart.
PLED (System Power LED):
Connect to the power status indicator on the chassis front panel. e LED is on when
the system is operating. e LED keeps blinking when the system is in S1/S3 sleep state.
e LED is o when the system is in S4 sleep state or powered o (S5).
HDLED (Hard Drive Activity LED):
Connect to the hard drive activity LED on the chassis front panel. e LED is on when
the hard drive is reading or writing data.
e front panel design may dier by chassis. A front panel module mainly consists
of power switch, reset switch, power LED, hard drive activity LED, speaker and etc.
When connecting your chassis front panel module to this header, make sure the wire
assignments and the pin assignments are matched correctly.
Onboard headers and connectors are NOT jumpers. Do NOT place jumper caps over
these headers and connectors. Placing jumper caps over the headers and connectors
will cause permanent damage to the motherboard.
GND
R #ESET
PWRBTN#
PLED-
PLED+
GND
HDLED-
HDLED+
1
GND
23
English
Fatal1ty B85 Killer Series
Power LED Header
(3-pin PLED1)
(see p.1, No. 9)
Please connect the chassis
power LED to this header
to
indicate the system’s
power status.
Serial ATA2 Connectors
(SATA2_0:
see p.1, No. 18)
(SATA2_1:
see p.1, No. 17)
ese two SATA2
connectors support SATA
data cables for internal
storage devices with up to
3.0 Gb/s data transfer rate.
Serial ATA3 Connectors
(SATA3_0:
see p.1, No. 12)(SATA3_1:
see p.1, No. 13)
(SATA3_2:
see p.1, No. 15)
(SATA3_3:
see p.1, No. 14)
ese four SATA3
connectors support SATA
data cables for internal
storage devices with up to
6.0 Gb/s data transfer rate.
USB 2.0 Headers
(9-pin USB4_5)
(see p.1, No. 19)
(9-pin USB6_7)
(see p.1, No. 20)
Besides four USB 2.0 ports
on the I/O panel, there
are two headers on this
motherboard. Each USB
2.0 header can support
two ports.
USB 3.0 Headers
(19-pin USB3_2_3)
(see p.1, No. 8)
Besides two USB 3.0 ports
on the I/O panel, there
is one header on this
motherboard. Each USB
3.0 header can support
two ports.
SATA2_0
SATA2_1
SATA3_0SATA3_2
SATA3_1SATA3_3
1
PLED+
PLED+
PLED-
1
IntA_PB_D+
Dummy
IntA_PB_D-
GND
IntA_PB_SSTX+
GND
IntA_PB_SSTX-
IntA_PB_SSRX+
IntA_PB_SSRX-
VbusVbus
Vbus
IntA_PA_SSRX-
IntA_PA_SSRX+
GND
IntA_PA_SSTX-
IntA_PA_SSTX+
GND
IntA_PA_D-
IntA_PA_D+
DUMMY
GND
GND
P+
P-
U RSB_PW
P+
P-
U RSB_PW
1
24
English
Front Panel Audio Header
(9-pin HD_AUDIO1)
(see p.1, No. 22)
is header is for
connecting audio devices
to the front audio panel.
Chassis Speaker Header
(4-pin SPEAKER1)
(see p.1, No. 10)
Please connect the chassis
speaker to this header.
Chassis and Power Fan
Connectors
(4-pin CHA_FAN1)
(see p.1, No. 16)
(3-pin CHA_FAN2)
(see p.1, No. 24)
(3-pin CHA_FAN3)
(see p.1, No. 23)
(3-pin PWR_FAN1)
(see p.1, No. 7)
Please connect fan cables
to the fan connectors and
match the black wire to
the ground pin.
1. High Denition Audio supports Jack Sensing, but the panel wire on the chassis must
support HDA to function correctly. Please follow the instructions in our manual and
chassis manual to install your system.
2. If you use an AC’97 audio panel, please install it to the front panel audio header by
the steps below:
A. Connect Mic_IN (MIC) to MIC2_L.
B. Connect Audio_R (RIN) to OUT2_R and Audio_L (LIN) to OUT2_L.
C. Connect Ground (GND) to Ground (GND).
D. MIC_RET and OUT_RET are for the HD audio panel only. You don’t need to
connect them for the AC’97 audio panel.
E. To activate the front mic, go to the “FrontMic” Tab in the Realtek Control panel
and adjust “Recording Volume”.
J_SENSE
OUT2_L
1
MIC_RET
PRESENCE#
GND
OUT2_R
MIC2_R
MIC2_L
OUT_RE
1
+5V
DUMMY
DUMMY
SPEAKER
GN
D
+12V
CHA_FAN_SPEED
F
AN_SPEED_CONTROL
GND
+ 12V
CHA_ FAN_SPEED
25
English
Fatal1ty B85 Killer Series
CPU Fan Connectors
(4-pin CPU_FAN1)
(see p.1, No. 3)
(3-pin CPU_FAN2)
(see p.1, No. 2)
is motherboard pro-
vides a 4-Pin CPU fan
(Quiet Fan) connector.
If you plan to connect a
3-Pin CPU fan, please
connect it to Pin 1-3.
ATX Power Connector
(24-pin ATXPWR1)
(see p.1, No. 6)
is motherboard pro-
vides a 24-pin ATX power
connector. To use a 20-pin
ATX power supply, please
plug it along Pin 1 and Pin
13.
ATX 12V Power
Connector
(8-pin ATX12V1)
(see p.1, No. 1)
is motherboard pro-
vides an 8-pin ATX 12V
power connector. To use a
4-pin ATX power supply,
please plug it along Pin 1
and Pin 5.
12
1
24
13
GND
+12V
CPU_FAN_SPEED
GND
+12V
CPU_FAN_SPEED
FA
N_SPEED_CONTRO
26
Deutsch
1 Einleitung
Vielen Dank, dass Sie sich für die Fatal1ty B85 Killer Series von ASRock entschie-
den haben – ein zuverlässiges Motherboard, das konsequent unter der strengen
Qualitätskontrolle von ASRock hergestellt wurde. Es liefert ausgezeichnete Leistung
mit robustem Design, das ASRocks Streben nach Qualität und Beständigkeit erfüllt.
1.1 Lieferumfang
• ASRock Fatal1ty B85 Killer Series-Motherboard (ATX-Formfaktor)
• ASRock Fatal1ty B85 Killer Series-Schnellinstallationsanleitung
• ASRock Fatal1ty B85 Killer Series-Support-CD
• 2 x Serial-ATA- (SATA) Datenkabel (optional)
• 1 x E/A-Blendenabschirmung
Da die technischen Daten des Motherboards sowie die BIOS-Soware aktualisiert
werden können, kann der Inhalt dieser Anleitung ohne Ankündigung geändert
werden. Falls diese Anleitung irgendwelchen Änderungen unterliegt, wird die aktuali-
sierte Version ohne weitere Hinweise auf der ASRock-Webseite zur Verfügung gestellt.
Sollten Sie technische Hilfe in Bezug auf dieses Motherboard benötigen, erhalten Sie
auf unserer Webseite spezischen Informationen über das von Ihnen verwendete Mo-
dell. Auch nden Sie eine aktuelle Liste unterstützter VGA-Karten und Prozessoren
auf der ASRock-Webseite: ASRock-Webseite http://www.asrock.com.
27
Deutsch
Fatal1ty B85 Killer Series
1.2 Technische Daten
Plattform • ATX-Formfaktor
• Premium Gold-Kondensatordesign (100 % in Japan gefertigt,
hochqualitative leitfähige Polymer-Kondensatoren)
A-Stil • Purity SoundTM
Gaming
Armor
CPU-Power
• Hi-Density-Netzanschluss
VGA-Karte
• 15μGold Finger in VGA-PCIe-Steckplatz (PCIE2)
Internet
• Qualcomm® Atheros® Killer
TM LAN
Audio
• Purity SoundTM
Prozessor • Unterstützt Intel® Core
TM i7 / i5 / i3 / Xeon® / Pentium® / Cele-
ron® der 4. Generation im LGA1150-Paket
• Digipower-Design
• 6-Leistungsphasendesign
• Unterstützt Intel® Turbo Boost 2.0-Technologie
Chipsatz • Intel® B85
• Unterstützt Intel® Small Business Advantage 2.0
Speicher • Dualkanal-DDR3-Speichertechnologie
• 4 x DDR3-DIMM-Steckplätze
• Unterstützt DDR3 1600/1333/1066 non-ECC, ungepuerter
Speicher
• Systemspeicher, max. Kapazität: 32 GB (siehe ACHTUNG)
• Unterstützt Intel® Extreme Memory Prole (XMP)1.3/1.2
Erweite-
rungs-
steckplatz
• 1 x PCI-Express 3.0-x16-Steckplatz (PCIE2: x16-Modus)
• 1 x PCI-Express 2,0-x16-Steckplatz (PCIE4: x4-Modus)
• 2 x PCI-Express 2.0-x1-Steckplätze
• 3 x PCI-Steckplätze
• Unterstützt 15μGold Finger (PCIE2-Steckplatz)
• Unterstützt AMD Quad CrossFireX TM und CrossFireXTM
28
Deutsch
Grakkarte
• Integrierte Intel® HD Graphics-Visualisierung und VGA-
Ausgänge können nur mit Prozessoren unterstützt werden, die
GPU-integriert sind.
• Unterstützt integrierte Intel® HD Graphics-Visualisierung:
Intel® Quick Sync Video mit AVC, MVC (S3D) und MPEG-
2 Full HW Encode1, Intel® InTru
TM 3D, Intel® Clear Video HD
Technology, Intel® Insider
TM, Intel® HD Graphics 4600
• Pixel Shader 5.0, DirectX 11.1
• Max. geteilter Speicher: 1792 MB
• Drei VGA-Ausgangsoptionen: D-Sub, DVI-D und HDMI
• Unterstützt drei Monitore
• Unterstützt HDMI-Technologie mit maximaler Auösung von
4K × 2K (4096 x 2304) bei 24 Hz
• Unterstützt DVI-D mit maximaler Auösung von 1920 x 1200
bei 60 Hz
• Unterstützt D-Sub mit maximaler Auösung von 1920 x 1200
bei 60 Hz
• Unterstützt Auto-Lippensynchronizität, hohe Farbtiefe (12
bpc), xvYCC und HBR (Audio mit hoher Bitrate) mit HDMI
(konformer HDMI-Monitor erforderlich)
• Unterstützt HDCP-Funktion mit DVI-D- und HDMI-Ports
• Unterstützt Blu-ray- (BD) Wiedergabe (Full HD/1080p) mit
DVI-D- und HDMI-Ports
Audio • 7.1-Kanal-HD-Audio mit Inhaltsschutz (Realtek ALC1150-
Audiocodec)
• Erstklassige Blu-ray-Audiounterstützung
• Unterstützt Purity Sound TM
- 115-dB-SRV-DAC mit Dierentialverstärker
- TI® NE5532 (unterstützt erstklassigen Headset-Verstärker mit
bis zu 600 Ohm)
- Direct Drive Technology
- Abdeckung mit EMV-Abschirmung
- PCB-isolierte Abschirmung
• Unterstützt DTS Connect
29
Deutsch
Fatal1ty B85 Killer Series
LAN • PCIE p33-x1 Gigabit LAN 10/100/1000 Mb/s
• Qualcomm® Atheros® Killer
TM E2200 Series
• Unterstützt Wake-On-LAN
• Unterstützt energieezientes Ethernet 802.3az
• Unterstützt PXE
Rückblen-
de, E/A
• 1 x PS/2-Maus-/Tastaturanschluss
• 1 x D-Sub-Port
• 1 x DVI-D-Port
• 1 x HDMI-Port
• 1 x Optischer SPDIF-Ausgang
• 3 x USB 2.0-Ports
• 1 x Fatal1ty-Mausanschluss (USB 2.0)
• 4 x USB 3.0-Ports
• 1 x RJ-45-LAN-Port mit LED (Aktivität/Verbindung-LED und
Geschwindigkeit-LED)
• HD-Audioanschluss: Hintere Lautsprecher / Zentral / Bass /
Line-in / Vorderer Lautsprecher /Mikrofon
Speicher • 4 x SATA-III-6,0-Gb/s-Anschlüsse, unterstützt NCQ, AHCI-
und „Hot-Plugging“-Funktionen
• 2 x SATA-II-3,0-Gb/s-Anschlüsse, unterstützt NCQ, AHCI und
„Hot-Plugging“-Funktionen
Anschluss • 1 x Betrieb-LED-Stileiste
• 2 x CPU-Lüeranschlüsse (1 x 4-polig, 1 x 3-polig)
• 3 x Gehäuselüeranschlüsse (1 x 4-polig, 2 x 3-polig)
• 1 x Netzteillüeranschluss (3-polig)
• 1 x 24-poliger ATX-Netzanschluss
• 1 x 8-poliger 12-V-Netzanschluss (hochdichter Netzanschluss)
• 1 x Audioanschluss an Frontblende
• 2 x USB 2.0-Stileisten (unterstützt vier USB 2.0-Ports)
• 1 x USB 3.0-Stileiste (unterstützt zwei USB 3.0-Ports)
BIOS-
Funktion
• 64-Mb-AMI-UEFI-Legal-BIOS mit Unterstützung mehrspra-
chiger grascher Benutzerschnittstellen
• ACPI 1.1-konforme Aufweckereignisse
• Jumper-frei
• SMBIOS 2.3.1-Unterstützung
• CPU, DRAM, PCH 1,05 V, PCH 1,5 V / Mehrfachspannungs-
anpassung
30
Deutsch
Support-
CD
• Treiber, Dienstprogramme, Antivirensoware (Testversion),
Google Chrome Browser und Toolbar, Start8 (30-Tage-Testver-
sion), Xsplit, Killer Network Manager
Hardware-
überwa-
chung
• CPU-/Gehäusetemperaturerkennung
• CPU/Gehäuse/Netzteil-Lüertachometer
• Lautloser CPU-/Gehäuselüer (ermöglicht automatische
Anpassung der Geschwindigkeit des Gehäuselüers über die
CPU-Temperatur)
• CPU/Gehäuselüer-Mehrfachgeschwindigkeitssteuerung
• Spannungsüberwachung: +12 V, +5 V, +3,3 V, CPU Vcore
Betriebssy-
stem
• Konform mit Microso® Windows® 8.1, 32 Bit / 8.1, 64 Bit / 8,32
Bit / 8, 64 Bit / 7, 32 Bit / 7, 64 Bit
Zertizie-
rungen
• FCC, CE, WHQL
• ErP/EuP ready (ErP/EuP ready-Netzteil erforderlich)
* Detaillierte Produktinformationen nden Sie auf unserer Webseite:
http://www.asrock.com
Bitte beachten Sie, dass mit einer Übertaktung, zu der die Anpassung von BIOS-
Einstellungen, die Anwendung der Untied Overclocking Technology oder die Nutzung
von Übertaktungswerkzeugen von Drittanbietern zählen, bestimmte Risiken ver-
bunden sind. Eine Übertaktung kann sich auf die Stabilität Ihres Systems auswirken
und sogar Komponenten und Geräte Ihres Systems beschädigen. Sie sollte auf eigene
Gefahr und eigene Kosten durchgeführt werden. Wir übernehmen keine Verantwor-
tung für mögliche Schäden, die durch eine Übertaktung verursacht wurden.
Aufgrund von Beschränkungen kann die Größe des tatsächlich für die Systemnut-
zung reservierten Speichers unter Windows®-Betriebssystemen mit 32 Bit weniger
als 4 GB betragen. Windows®-Betriebssysteme mit 64 Bit haben keine derartigen
Beschränkungen. Mit ASRock XFast RAM können Sie den Speicher einsetzen, den
Windows® nicht nutzen kann.
31
Deutsch
Fatal1ty B85 Killer Series
1.3 Jumpereinstellung
Die Abbildung zeigt, wie die Jumper eingestellt werden. Wenn die Jumper-Kappe
auf den Kontakten angebracht ist, ist der Jumper „kurzgeschlossen“. Wenn keine
Jumper-Kappe auf den Kontakten angebracht ist, ist der Jumper „oen“. Die Abbil-
dung zeigt einen 3-poligen Jumper, dessen Kontakt 1 und Kontakt 2 „kurzgeschlos-
sen“ sind, wenn eine Jumper-Kappe auf diesen 2 Kontakten angebracht ist.
CMOS-löschen-Jumper
(CLRCMOS1)
(siehe S. 1, Nr. 16)
CLRCMOS1 ermöglicht Ihnen die Löschung der Daten im CMOS. Zum Löschen
und Rücksetzen der Systemparameter auf die Standardeinrichtung schalten Sie
den Computer bitte ab und ziehen das Netzkabel aus der Steckdose. Warten Sie 15
Sekunde, schließen Sie dann Kontakt 2 und Kontakt 3 an CLRCMOS1 5 Sekunden
lang mit einer Jumper-Kappe kurz. Löschen Sie den CMOS jedoch nicht direkt
nach der BIOS-Aktualisierung. Falls Sie den CMOS direkt nach Abschluss der
BIOS-Aktualisierung löschen müssen, starten Sie das System zunächst; fahren Sie
es dann vor der CMOS-Löschung herunter. Bitte beachten Sie, dass Kennwort,
Datum, Zeit und Benutzerstandardprol nur gelöscht werden, wenn die CMOS-
Batterie entfernt wird.
CMOS löschenStandard
32
Deutsch
1.4 Integrierte Stiftleisten und Anschlüsse
Systemblende-Stileiste
(9-polig, PANEL1)
(siehe S. 1, Nr. 11)
Verbinden Sie Netz-
schalter, Reset-Taste und
Systemstatusanzeige am
Gehäuse entsprechend der
nachstehenden Pinbele-
gung mit dieser Stileiste.
Beachten Sie vor Anschlie-
ßen der Kabel die positiven
und negativen Kontakte.
PWRBTN (Ein-/Austaste):
Mit der Ein-/Austaste an der Frontblende des Gehäuses verbinden. Sie können die
Abschaltung Ihres Systems über die Ein-/Austaste kongurieren.
RESET (Reset-Taste):
Mit der Reset-Taste an der Frontblende des Gehäuses verbinden. Starten Sie den Com-
puter über die Reset-Taste neu, wenn er abstürzt oder sich nicht normal neu starten
lässt.
PLED (Systembetrieb-LED):
Mit der Betriebsstatusanzeige an der Frontblende des Gehäuses verbinden. Die LED
leuchtet, wenn das System läu. Die LED blinkt, wenn sich das System im S1/S3-
Ruhezustand bendet. Die LED ist aus, wenn sich das System im S4-Ruhezustand
bendet oder ausgeschaltet ist (S5).
HDLED (Festplattenaktivität-LED):
Mit der Festplattenaktivität-LED an der Frontblende des Gehäuses verbinden. Die
LED leuchtet, wenn die Festplatte Daten liest oder schreibt.
Das Design der Frontblende kann je nach Gehäuse variieren. Ein Frontblendenmodul
besteht hauptsächlich aus Ein-/Austaste, Reset-Taste, Betrieb-LED, Festplattenaktivi-
tät-LED, Lautsprecher etc. Stellen Sie beim Anschließen Ihres Frontblendenmoduls an
diese Stileiste sicher, dass Kabel- und Pinbelegung richtig abgestimmt sind.
Integrierte Stileisten und Anschlüsse sind KEINE Jumper. Bringen Sie KEINE
Jumper-Kappen an diesen Stileisten und Anschlüssen an. Durch Anbringen von
Jumper-Kappen an diesen Stileisten und Anschlüssen können Sie das Motherboard
dauerha beschädigen.
GND
R #ESET
PWRBTN#
PLED-
PLED+
GND
HDLED-
HDLED+
1
GND
33
Deutsch
Fatal1ty B85 Killer Series
Betrieb-LED-Stileiste
(3-polig, PLED1)
(siehe S. 1, Nr. 9)
Bitte verbinden Sie die
Betrieb-LED des Gehäuses
zur
Anzeige des System-
betriebsstatus mit dieser
Stileiste.
Serial-ATA-II-Anschlüsse
(SATA2_0:
siehe S. 1, Nr. 18)
(SATA2_1:
siehe S. 1, Nr. 17)
Diese beiden SATA-
IIAnschlüsse unterstützen
SATA-Datenkabel für
interne Speichergeräte mit-
einer Datenübertragungsge
schwindigkeit bis 3,0 Gb/s.
Serial-ATA-III-
Anschlüsse
(SATA3_0:
siehe S. 1, Nr. 12)
(SATA3_1:
siehe S. 1, Nr. 13)
(SATA3_2:
siehe S. 1, Nr. 15)
(SATA3_3:
siehe S. 1, Nr. 14)
Diese vier SATA-III-
Anschlüsse unterstützen
SATA-Datenkabel für
interne Speichergeräte mit
einer Datenübertragungs-
geschwindigkeit bis 6,0
Gb/s.
USB 2.0-Stileisten
(9-polig, USB4_5)
(siehe S. 1, Nr. 19)
(9-polig, USB6_7)
(siehe S. 1, Nr. 20)
Neben zwei USB 2.0-Ports
an der E/A-Blende ben-
den sich zwei Stileisten
an diesem Motherboard.
Jede USB 2.0-Stileiste
kann zwei Ports unterstüt-
zen.
USB 3.0-Stileisten
(19-polig, USB3_2_3)
(siehe S. 1, Nr. 8)
Neben vier USB 3.0-Ports
an der E/A-Blende bendet
sich eine Stileiste an
diesem Motherboard. Jede
USB 3.0-Stileiste kann
zwei Ports unterstützen.
1
PLED+
PLED+
PLED-
SATA2_0
SATA2_1
SATA3_0SATA3_2
SATA3_1SATA3_3
1
IntA_PB_D+
Dummy
IntA_PB_D-
GND
IntA_PB_SSTX+
GND
IntA_PB_SSTX-
IntA_PB_SSRX+
IntA_PB_SSRX-
VbusVbus
Vbus
IntA_PA_SSRX-
IntA_PA_SSRX+
GND
IntA_PA_SSTX-
IntA_PA_SSTX+
GND
IntA_PA_D-
IntA_PA_D+
DUMMY
GND
GND
P+
P-
U RSB_PW
P+
P-
U RSB_PW
1
34
Deutsch
Audiostileiste
(Frontblende)
(9-polig, HD_AUDIO1)
(siehe S. 1, Nr. 22)
Diese Stileiste dient dem
Anschließen von Audioge-
räten an der Frontblende.
Gehäuselautsprechersti-
leiste
(4-polig, SPEAKER1)
(siehe S. 1, Nr. 10)
Bitte verbinden Sie den
Gehäuselautsprecher mit
dieser Stileiste.
Gehäuse- und Netzteillüf-
teranschlüsse
(4-polig, CHA_FAN1)
(siehe S. 1, Nr. 16)
(3-polig, CHA_FAN2)
(siehe S. 1, Nr. 24)
(3-polig, CHA_FAN3)
(siehe S. 1, Nr. 23)
(3-polig, PWR_FAN1)
(siehe S. 1, Nr. 7)
Bitte verbinden Sie die
Lüerkabel mit den
Lüeranschlüssen; der
schwarze Draht gehört
zum Erdungskontakt.
1. High Denition Audio unterstützt Anschlusserkennung, der Draht am Gehäuse
muss dazu jedoch HDA unterstützt. Bitte befolgen Sie zum Installieren Ihres Sy-
stems die Anweisungen in unserer Anleitung und der Anleitung zum Gehäuse.
2. Wenn Sie ein AC’97-Audiopanel nutzen, installieren Sie es bitte anhand der nach-
stehenden Schritte an der Audiostileiste (Frontblende):
A. Verbinden Sie Mic_IN (MIC) mit MIC2_L.
B. Verbinden Sie Audio_R (RIN) mit OUT2_R und Audio_L (LIN) mit OUT2_L.
C. Verbinden Sie Erde (GND) mit Erde (GND).
D. MIC_RET und OUT_RET sind nur für das HD-Audio-Panel vorgesehen. Sie
müssen Sie nicht mit dem AC’97-Audiopanel verbinden.
E. Rufen Sie zur Aktivierung des vorderen Mikrofons das „FrontMic
(Frontmikrofon)“-Register in der Realtek-Systemsteuerung auf und passen „Recor-
ding Volume (Aufnahmelautstärke)“ an.
J_SENSE
OUT2_L
1
MIC_RET
PRESENCE#
GND
OUT2_R
MIC2_R
MIC2_L
OUT_RET
1
+5V
DUMMY
DUMMY
SPEAKER
GN
D
+12V
CHA_FAN_SPEED
F
AN_SPEED_CONTROL
GND
+ 12V
CHA_ FAN_SPEED
35
Deutsch
Fatal1ty B85 Killer Series
CPU-Lüeranschlüsse
(4-polig, CPU_FAN1)
(siehe S. 1, Nr. 3)
(3-polig, CPU_FAN2)
(siehe S. 1, Nr. 2)
Dieses Motherboard bietet
einen 4-poligen CPU-
Lüeranschluss (lautloser
Lüer). Falls Sie einen
3-poligen CPU-Lüer
anschließen möchten,
verbinden Sie ihn bitte mit
Kontakt 1 bis 3.
ATX-Netzanschluss
(24-polig, ATXPWR1)
(siehe S. 1, Nr. 6)
Dieses Motherboard
bietet einen 24-poligen
ATX-Netzanschluss.
Bitte schließen Sie es zur
Nutzung eines 20-poligen
ATX-Netzteils entlang
Kontakt 1 und Kontakt 13
an.
ATX-12-V-Netzanschluss
(8-polig, ATX12V1)
(siehe S. 1, Nr. 1)
Dieses Motherboard bietet
einen 8-poligen ATX-12-
V-Netzanschluss. Bitte
schließen Sie es zur Nut-
zung eines 4-poligen ATX-
Netzteils entlang Kontakt
1 und Kontakt 5 an.
12
1
24
13
GND
+12V
CPU_FAN_SPEED
GND
+12V
CPU_FAN_SPEED
FAN_SPEED_CONTROL
36
Français
1 Introduction
Nous vous remercions d’avoir acheté cette carte mère ASRock de la série Fatal1ty
B85 Killer, une carte mère able fabriquée conformément au contrôle de qualité
rigoureux et constant appliqué par ASRock. Elle vous ore de performances élevées
associées à une conception robuste, dignes de l’engagement de qualité et de durabi-
lité qui font la réputation de ASRock.
1.1 Contenu de l’emballage
• Carte mère ASRock Série Fatal1ty B85 Killer(facteur de forme ATX)
• Guide d’installation rapide ASRock Série Fatal1ty B85 Killer
• CD d’assistance ASRock Série Fatal1ty B85 Killer
• 2 x câbles de données Serial ATA (SATA) (Optionnel)
• 1 x panneau de protection E/S
Les spécications de la carte mère et du logiciel BIOS pouvant être mises à jour,
le contenu de ce document est soumis à modication sans préavis. En cas de
modications du présent document, la version mise à jour sera disponible sur le site
Internet ASRock sans notication préalable. Si vous avez besoin d’une assistance
technique pour votre carte mère, veuillez visiter notre site Internet pour plus de
détails sur le modèle que vous utilisez. La liste la plus récente des cartes VGA et des
processeurs pris en charge est également disponible sur le site Internet de ASRock.
Site Internet ASRock http://www.asrock.com.
37
Français
Fatal1ty B85 Killer Series
1.2 Spécications
Plateforme • Facteur de forme ATX
• Condensateur de conception premium or (condensateurs
haute qualité en polymère conducteur 100% fabriqués au
Japon)
A-Style • Purity SoundTM
Armure
gaming
Alimentation du processeur
• Connecteur d’alimentation haute densité
Carte VGA
• Gold Finger 15μ dans fente VGA PCIe (PCIE2)
Internet
• Qualcomm® Atheros® Killer
TM LAN
Audio
• Purity SoundTM
Processeur • Prend en charge les processeurs 4ème Génération Intel® Core
TM
i7 / i5 / i3 / Xeon® / Pentium® / Celeron® en package LGA1150
• Conception Digi Power
• Alimentation à 6 phases
• Prend en charge la technologie Intel® Turbo Boost 2.0
Chipset • Intel® B85
• Prend en charge Intel® Small Business Advantage 2.0
Mémoire • Technologie mémoire double canal DDR3
• 4 x fentes DIMM DDR3
• Prend en charge les mémoires sans tampon non ECC DDR3
1600/1333/1066
• Capacité max. de la mémoire système : 32Go (voir
AVERTISSEMENT)
• Prend en charge Intel® Extreme Memory Prole (XMP)1.3/1.2
Fente
d’expansion
• 1 x fente PCI Express 3.0 x16 (PCIE2 : mode x16)
• 1 x fente PCI Express 2.0 x16 (PCIE4 : mode x4)
• 2 x fentes PCI Express 2.0 x1
• 3 x fentes PCI
• Prend en charge 15μGold Finger (fente PCIE2)
• Prend en charge AMD Quad CrossFireXTM et CrossFireXTM
38
Français
Graphiques
• La technologie Intel® HD Graphics Built-in Visuals et les
sorties VGA sont uniquement prises en charge par les
processeurs intégrant un contrôleur graphique.
• Prend en charge la technologie Intel® HD Graphics Built-in
Visuals : Intel® Quick Sync Video with AVC, MVC (S3D) et
MPEG-2 Full HW Encode1, Intel® InTru
TM 3D, technologie
Intel® Clear Video HD, Intel® Insider
TM, Intel® HD Graphics
4600
• Pixel Shader 5.0, DirectX 11.1
• Mémoire partagée max. 1792Mo
• Trois options de sortie VGA : D-Sub, DVI-D et HDMI
• Prend en charge la conguration à triple moniteurs
• Prend en charge la technologie HDMI avec résolution
maximale de 4K × 2K (4096x2304) @ 24Hz
• Prend en charge le mode DVI-D avec une résolution maximale
de 1920x1200 @ 60Hz
• Prend en charge le mode D-Sub avec une résolution maximale
de 1920x1200 @ 60Hz
• Prend en charge les technologies Auto Lip Sync, Deep Color
(12bpc), xvYCC et HBR (High Bit Rate Audio) avec HDMI (un
écran compatible HDMI est requis)
• Prend en charge la fonction HDCP via ports DVI-D et HDMI
• Prend en charge la lecture Blu-ray (BD) Full HD 1080p via
ports DVI-D et HDMI
Audio • Audio 7.1 CH HD avec protection du contenu (codec audio
Realtek ALC1150)
• Compatible audio Blu-ray Premium
• Prend en charge Purity Sound TM
- 115dB SNR DAC avec amplicateur diérentiel
- TI® NE5532 (compatible Premium Headset Amplier jusqu’à
600 Ohms)
- technologie Direct Drive
- capot de protection EMI
- blindage isolant PCB
• Prend en charge DTS Connect
39
Français
Fatal1ty B85 Killer Series
Réseau • PCIE p43-x1 Gigabit LAN 10/100/1000 Mb/s
• Qualcomm® Atheros® Killer
TM E2200 Série
• Prend en charge la fonction Wake-On-LAN
• Prend en charge la fonction d’économie d’énergie Ethernet
802,3az
• Prend en charge PXE
Connec-
tique du
panneau
arrière
• 1 x port souris/clavier PS/2
• 1 x port D-Sub
• 1 x port DVI-D
• 1 x port HDMI
• 1 x port sortie optique SPDIF
• 3 x ports USB 2.0
• 1 x port souris Fatal1ty (USB 2.0)
• 4 x ports USB 3.0
• 1 x port RJ-45 LAN avec LED (LED ACT/LIEN et LED
VITESSE)
• Connecteurs jack audio HD : Haut-parleur arrière / central /
basses / entrée ligne / haut-parleur avant / microphone
Stockage • 4 x connecteurs SATA3 6,0 Go/s, compatibles avec les fonc-
tions NCQ, AHCI et « Hot Plug »
• 2 x connecteurs SATA2 3,0 Go/s, compatibles avec les fonc-
tions NCQ, AHCI et « Hot Plug »
Connec-
tique
• 1 x embase LED d’alimentation
• 2 x connecteurs pour ventilateur de processeur
(1 x 4 broches, 1 x 3 broches)
• 3 x connecteurs pour ventilateur de châssis
(1 x 4 broches, 2 x 3 broches)
• 1 x connecteur pour ventilateur d’alimentation (3 broches)
• 1 x connecteur d’alimentation ATX 24 broches
• 1 x connecteur d’alimentation 12V 8 broches (connecteur
d’alimentation haute densité)
• 1 x connecteur audio panneau frontal
• 2 x embases USB 2.0 (pour 4 ports USB 2.0)
• 1 x embase USB 3.0 (pour 2 ports USB 3.0)
Caractéris-
tiques du
BIOS
• BIOS UEFI AMI 64Mo avec prise en charge interface
graphique multilingue
• Compatible ACPI 1.1 Wake Up Events
• Prend en charge la conguration Jumpfree
• Prend en charge SMBIOS 2.3.1
• Réglage de la tension CPU, DRAM, PCH 1,05V, PCH 1,5V
40
Français
CD inclus • Pilotes, utilitaires, logiciel AntiVirus (version d’évaluation),
navigateur Google Chrome et barre d’outils, Start8 (30 jours
d’évaluation), Killer Network Manager
Surveillance
du matériel
• Détection de la température du processeur/châssis
• Tachéomètre processeur/châssis/ventilateur d’alimentation
• Fonction ventilateur silencieux processeur/châssis Quiet
Fan (permet au ventilateur du châssis d’adapter sa vitesse de
rotation automatiquement en fonction de la température du
processeur)
• Contrôle simultané des vitesse du ventilateur processeur/
châssis
• Surveillance de la tension d’alimentation : +12V, +5V, +3,3V,
CPU Vcore
Système
d’exploita-
tion
• Compatible Microso® Windows® 8.1 32-bit / 8.1 64-bit / 8 32-
bit / 8 64-bit / 7 32-bit / 7 64-bits
Certica-
tions
• FCC, CE, WHQL
• ErP/EuP Ready (alimentation ErP/EuP ready requise)
* pour des informations détaillées de nos produits, veuillez visiter notre site:
http://www.asrock.com
Il est important de signaler que l'overcloking présente certains risques, incluant
des modications du BIOS, l’application d’une technologie d’overclocking déliée
et l'utilisation d'outils d'overclocking développés par des tiers. La stabilité de votre
système peut être aectée par ces pratiques, voire provoquer des dommages aux
composants et aux périphériques du système. L’overclocking se fait à vos risques et
périls. Nous ne pourrons en aucun cas être tenus pour responsables des dommages
éventuels provoqués par l’overclocking.
En raison de limitations dues au système d'exploitation, la capacité de mémoire uti-
lisée sous Windows® 32-bit peut être inférieure à 4 Go. Cette limitation ne concerne
pas les systèmes d'exploitation Windows® 64-bit. Vous pouvez utiliser ASRock XFast
RAM pour utiliser la mémoire dont Windows® ne peut se servir.
41
Français
Fatal1ty B85 Killer Series
1.3 Conguration des cavaliers (jumpers)
L’illustration ci-dessous vous renseigne sur la conguration des cavaliers (jumpers).
Lorsque le capuchon du cavalier est installé sur les broches, le cavalier est ‘court-
circuité’. Si le capuchon du cavalier n’est pas installé sur les broches, le cavalier est
‘ouvert’. L’illustration représente un cavalier à 3 broches dont les broches 1 et 2 sont
«court-circuitées» si un capuchon de cavalier est posé sur ces 2 broches.
Cavalier Clear CMOS
(CLRCMOS1)
(voir p.1, No. 16)
CLRCMOS1 vous permet d’eacer les donnés de la CMOS. Pour eacer les
paramètres du système et rétablir les valeurs par défaut, veuillez éteindre votre
ordinateur et débrancher son cordon d’alimentation. Patientez 15 secondes, puis
utilisez un capuchon de cavalier pour court-circuiter la broche 2 et la broche 3 sur
CLRCMOS1 pendant 5 secondes. Toutefois, n’eacez pas la CMOS immédiatement
après avoir mis à jour le BIOS. Si vous avez besoin d’eacer les données CMOS
après une mise à jour du BIOS, vous devez tout d’abord redémarrer le système,
puis l’éteindre avant de procéder à l’eacement de la CMOS. Veuillez noter que
les paramètres mot de passe, date, heure et prol par défaut de l’utilisateur seront
uniquement eacés en cas de retrait de la pile de la CMOS.
Fonction Clear CMOSPar défaut
42
Français
1.4 Embases et connecteurs de la carte mère
Embase du panneau
système
(PANNEAU1 à 9 broches)
(voir p.1, No. 11)
Branchez le bouton de mise
en marche/arrêt, le bouton
de réinitialisation et le
témoin d’état du système
présents sur le châssis sur
cette embase en respectant
la conguration des broches
illustrée ci-dessous. Repérez
les broches positive et
négative avant de brancher
les câbles.
PWRBTN (Bouton de mise en marche) :
pour brancher le bouton de mise en marche au panneau frontal du châssis. Vous
pouvez congurer la façon dont votre système doit s’arrêter à l’aide du bouton de mise
en marche.
RESET (Bouton de réinitialisation) :
pour brancher le bouton de réinitialisation au panneau frontal du châssis. Appuyez
sur le bouton de réinitialisation pour redémarrer l’ordinateur en cas de plantage ou de
dysfonctionnement au démarrage.
PLED (LED d’alimentation du système) :
pour brancher le témoin d’état de l’alimentation au panneau frontal du châssis. Le
LED est allumé lorsque le système fonctionne. Le LED clignote lorsque le système se
trouve en mode veille S1/S3. Le LED est éteint lorsque le système se trouve en mode
veille S4 ou hors tension (S5).
HDLED (LED d’activité du disque dur) :
pour brancher le témoin LED d’activité du disque dur au panneau frontal du châssis.
Le LED est allumé lorsque le disque dur lit ou écrit des données.
La conception du panneau frontal peut varier en fonction du châssis. Un module de
panneau frontal est principalement composé d'un bouton de mise en marche, bouton
de réinitialisation, LED d’alimentation, LED d’activité du disque dur, haut-parleur
etc. Lorsque vous reliez le module du panneau frontal de votre châssis sur cette embase,
veillez à parfaitement faire correspondre les ls et les broches.
Les embases et connecteurs situés sur la carte NE SONT PAS des cavaliers. Ne
placez JAMAIS de capuchons de cavaliers sur ces embases ou connecteurs. Placer un
capuchon de cavalier sur ces embases ou connecteurs endommagera irrémédiablement
votre carte mère.
GND
R #ESET
PWRBTN#
PLED-
PLED+
GND
HDLED-
HDLED+
1
GND
43
Français
Fatal1ty B85 Killer Series
Embase LED
d’alimentation
(PLED1 à 3 broches)
(voir p.1, No. 9)
Veuillez brancher le
LED d’alimentation du
châssis sur cette embase
pour indiquer l’état
d’alimentation du système.
Connecteurs Serial ATA2
(SATA2_0:
voir p.1, No. 18)
(SATA2_1:
voir p.1, No. 17)
Ces deux connecteurs
SATA2 sont compatibles
avec les câbles de données
SATA pour les appareils de
stockage internes avec un
taux de transfert maximal
de 3,0 Go/s.
Connecteurs Serial ATA3
(SATA3_0:
voir p. 1, No. 12)
(SATA3_1:
(voir p.1, No. 13)
(SATA3_2:
(voir p.1, No. 15)
(SATA3_3:
voir p.1, No. 14)
Ces quatre connecteurs
SATA3 sont compatibles
avec les câbles de données
SATA pour les appareils de
stockage internes avec un
taux de transfert maximal
de 6,0 Go/s.
Embases USB 2.0
(USB4_5 à 9 broches)
(voir p.1, No. 19)
(USB6_7 à 9 broches)
(voir p.1, No. 20)
En plus des quatre ports
USB 2.0 sur le panneau E/
S, cette carte mère est dotée
de deux embases. Chaque
embase USB 2.0 peut
prendre en charge deux
ports.
Embases USB 3.0
(USB3_2_3 à 19 broches)
(voir p.1, No. 8)
En plus des deux ports USB
3.0 sur le panneau E/S, cette
carte mère est dotée d’une
embase supplémentaire.
Chaque embase USB 3.0
peut prendre en charge
deux ports.
1
PLED+
PLED+
PLED-
SATA2_0
SATA2_1
SATA3_0SATA3_2
SATA3_1SATA3_3
1
IntA_PB_D+
Dummy
IntA_PB_D-
GND
IntA_PB_SSTX+
GND
IntA_PB_SSTX-
IntA_PB_SSRX+
IntA_PB_SSRX-
VbusVbus
Vbus
IntA_PA_SSRX-
IntA_PA_SSRX+
GND
IntA_PA_SSTX-
IntA_PA_SSTX+
GND
IntA_PA_D-
IntA_PA_D+
DUMMY
GND
GND
P+
P-
U RSB_PW
P+
P-
U RSB_PW
1
44
Français
Embase audio du panneau
frontal
(HD_AUDIO1 à 9
broches)
(voir p.1, No. 22)
Cette embase sert au
branchement des appareils
audio au panneau audio
frontal.
Embase du haut-parleur
du châssis
(SPEAKER1 à 4 broches)
(voir p.1, No. 10)
Veuillez brancher le haut-
parleur du châssis sur cette
embase.
Connecteurs du châssis
et de l’alimentation du
ventilateur
(CHA_FAN1 à 4 broches)
(voir p.1, No. 16)
(CHA_FAN2 à 3 broches)
(voir p.1, No. 24)
(CHA_FAN3 à 3 broches)
(voir p.1, No. 23)
(PWR_FAN1 à 3 broches)
(voir p.1, No. 7)
Veuillez brancher les câbles
du ventilateur sur les
connecteurs du ventilateur,
puis reliez le l noir à la
broche de mise à terre.
1. L’audio haute dénition prend en charge la technologie Jack Sensing (détection
de la che), mais le panneau grillagé du châssis doit être compatible avec la HDA
pour fonctionner correctement. Veuillez suivre les instructions gurant dans notre
manuel et dans le manuel du châssis pour installer votre système.
2. Si vous utilisez un panneau audio AC’97, veuillez le brancher sur l’embase audio du
panneau frontal en procédant comme suit :
A. branchez Mic_IN (MIC) sur MIC2_L.
B. branchez Audio_R (RIN) sur OUT2_R et Audio_L (LIN) sur OUT2_L.
C. branchez la mise à terre (GND) sur mise à terre (GND).
D. MIC_RET et OUT_RET sont exclusivement réservés au panneau audio HD. Il
est inutile de les brancher avec le panneau audio AC’97.
E. Pour activer le micro frontal, sélectionnez l’onglet « FrontMic » du panneau de
contrôle Realtek et réglez le paramètre « Volume d’enregistrement ».
J_SENSE
OUT2_L
1
MIC_RET
PRESENCE#
GND
OUT2_R
MIC2_R
MIC2_L
OUT_RET
1
+5V
DUMMY
DUMMY
SPEAKER
GN
D
+12V
CHA_FAN_SPEED
F
AN_SPEED_CONTROL
GND
+ 12V
CHA_ FAN_SPEED
45
Français
Fatal1ty B85 Killer Series
Connecteurs du
ventilateur du processeur
(CPU_FAN1 à 4 broches)
(voir p.1, No. 3)
(CPU_FAN2 à 3 broches)
(voir p.1, No. 2)
Cette carte mère est
dotée d’un connecteur à 4
broches pour ventilateur de
processeur (Quiet Fan). Si
vous envisagez de connecter
un ventilateur de processeur
à 3 broches, veuillez le
brancher sur la Broche 1-3.
Connecteur
d’alimentation ATX
(ATXPWR1 à 24 broches)
(voir p.1, No. 6)
Cette carte mère est
dotée d’un connecteur
d’alimentation ATX à 24
broches. Pour utiliser une
alimentation ATX à 20
broches, veuillez eectuer
les branchements sur la
Broche 1 et la Broche 13.
Connecteur
d’alimentation ATX 12V
(ATX12V1 à 8 broches)
(voir p.1, No. 1)
Cette carte mère est
dotée d’un connecteur
d’alimentation ATX 12V
à 8 broches. Pour utiliser
une alimentation ATX à 4
broches, veuillez eectuer
les branchements sur la
Broche 1 et la Broche 5.
12
1
24
13
GND
+12V
CPU_FAN_SPEED
GND
+12V
CPU_FAN_SPEED
FA
N_SPEED_CONTRO
46
Italiano
1 Introduzione
Grazie per aver acquistato la scheda madre serie Fatal1ty B85 Killer ASRock, una
scheda madre adabile prodotta secondo i costanti e rigorosi controlli di qualità di
ASRock. La scheda madre ore eccellenti prestazioni con un design robusto che si
adatta all’impegno di ASRock di orire sempre qualità e durata.
1.1 Contenuto della confezione
• Scheda madre serie Fatal1ty B85 Killer ASRock (fattore di forma ATX)
• Guida rapida di installazione serie Fatal1ty B85 Killer ASRock
• CD di supporto serie Fatal1ty B85 Killer ASRock
• 2 x cavi dati Serial ATA (SATA) (opzionali)
• 1 x mascherina metallica posteriore I/O
Dato che le speciche della scheda madre e del soware BIOS possono essere aggiorna-
te, il contenuto di questo manuale sarà soggetto a variazioni senza preavviso. Nel caso
di eventuali modiche del presente manuale, la versione aggiornata sarà disponibile
sul sito Web di ASRock senza ulteriore preavviso. Per il supporto tecnico correlato a
questa scheda madre, visitare il nostro sito Web per informazioni speciche relative al
modello attualmente in uso. È possibile trovare l'elenco di schede VGA più recenti e di
supporto di CPU anche sul sito Web di ASRock. Sito Web di ASRock
http://www.asrock.com.
47
Italiano
Fatal1ty B85 Killer Series
1.2 Speciche
Piattaforma • Fattore di forma ATX
• Design condensatore Premium Gold (condensatori a
conduttore in polimero di alta qualità realizzati al 100% in
Giappone)
Stile superio-
re
• Purity SoundTM
Armatura
dagioco
Potenza CPU
• Connettore alimentazione ad alta densità
Scheda VGA
• 15μGold Finger nell’alloggio VGA PCIe (PCIE2)
Internet
• Qualcomm® Atheros® Killer
TM LAN
Audio
• Purity SoundTM
CPU • Supporta Intel® Core
TM i7 / i5 / i3 di 4
a generazione / Xeon®
/ Pentium® / Celeron® in LGA1150 Package
• Design Digi Power
• 6 Power Phase Design
• Supporta la tecnologia Intel® Turbo Boost 2.0
Chipset • Intel® B85
• Supporta Intel® Small Business Advantage 2.0
Memoria • Tecnologia con memoria DDR3 a doppio canale
• 4 x slot DIMM DDR3
• Supporta la memoria DDR3 1600/1333/1066 non ECC,
senza buer
• Capacità max. della memoria di sistema: 32 GB (si veda la
sezione ATTENZIONE)
• Supporta Intel® Extreme Memory Prole (XMP)1.3/1.2
Slot di espan-
sione
• 1 x PCI Express 3.0 x16 slot (PCIE2: modalità x16)
• 1 x PCI Express 2.0 x16 slot (PCIE4: modalità x4)
• 2 x PCI Express 2.0 p51-x1 slot
• 3 x slot PCI
• Supporta 15μGold Finger (slot PCIE2)
• Supporta AMD Quad CrossFireXTM e CrossFireXTM
48
Italiano
Graca
• La videograca integrata della scheda video HD Intel®
e le uscite VGA possono essere supportate soltanto con
processori con GPU integrata.
• Supporta la videograca integrata della scheda video HD
Intel®: Intel® Quick Sync Video con AVC, MVC (S3D) e
MPEG-2 Full HW Encode1, Intel® InTru
TM 3D, tecnologia
Intel® Clear Video HD, Intel® Insider
TM, Intel® HD
Graphics 4600
• Pixel Shader 5.0, DirectX 11.1
• Memoria condivisa max. 1792 MB
• Tre opzioni uscita VGA: D-Sub, DVI-D e HDMI
• Supporta il triplo monitor
• Supporta la tecnologia HDMI con risoluzione max. no a
4 K × 2 K (4096 x 2304) a 24 Hz
• Supporta DVI-D con una risoluzione max. no a 1920 x
1200 a 60 Hz
• Supporta D-Sub con una risoluzione max. no a 1920 x
1200 a 60 Hz
• Supporta Auto Lip Sync, Deep Color (12 bpc), xvYCC e
HBR (High Bit Rate Audio) con HDMI (è necessario un
monitor conforme ad HDMI)
• Supporta la funzione HDCP con porte DVI-D e HDMI
• Supporta Blu-ray (BD) Full HD 1080p, riproduzione con
porte DVI-D e HDMI
Audio • Audio HD a 7.1 canali con Content Protection (codec
audio Realtek ALC1150)
• Supporto audio Blu-ray Premium
• Supporta Purity Sound TM
- 115dB SNR DAC con amplicatore dierenziale
- TI® NE5532 (supporta l'amplicatore per cue di qualità
superiore no a 600 Ohm)
- Tecnologia Direct Drive
- copertura a schermo EMI
- schermo isolato PCB
• Supporta DTS Connect
49
Italiano
Fatal1ty B85 Killer Series
LAN • PCIE p53-x1 LAN Gigabit 10/100/1000 Mb/s
• Qualcomm® Atheros® Killer
TM E2200 Serie
• Supporta Wake-On-LAN
• Supporta Energy Ecient Ethernet 802.3az
• Supporta PXE
I/O pannello
posteriore
• 1 x porta mouse/tastiera PS/2
• 1 x porta D-Sub
• 1 x porta DVI-D
• 1 x porta HDMI
• 1 x porta uscita SPDIF ottico
• 3 x porte USB 2.0
• 1 x porta mouse Fatal1ty (USB 2.0)
• 4 x porte USB 3.0
• 1 x porta LAN RJ-45 con LED (ACT/LINK LED e SPEED
LED)
• Jack audio HD: altoparlante posteriore/centrale/basso/
ingresso linea/altoparlante anteriore/microfono
Archiviazio-
ne
• 4 x connettori SATA3 6,0 Gb/s, supporta le funzioni NCQ,
AHCI e “Hot Plug”
• 2 x connettori SATA2 3,0 Gb/s, supporta le funzioni NCQ,
AHCI e “Hot Plug”
Connettore • 1 x header LED di alimentazione
• 2 x connettori ventola CPU (1 x 4 pin, 1 x 3 pin)
• 3 x connettori ventola chassis (1 x 4 pin, 2 x 3 pin)
• 1 x connettore ventola alimentazione (3 pin)
• 1 x connettore alimentazione ATX a 24 pin
• 1 x connettore alimentazione da 12 V a 8 pin (connettore
alimentazione ad alta densità)
• 1 x connettore audio pannello anteriore
• 2 x header USB 2.0 (supporto 4 porte USB 2.0)
• 1 x header USB 3.0 (supporta 2 porte USB 3.0)
Caratteristi-
che del BIOS
• BIOS legale 64Mb AMI UEFI con supporto GUI multilin-
gue
• Eventi di wake up conformi ad ACPI 1.1
• Supporta jumperfree
• Supporto SMBIOS 2.3.1
• Multiregolazione tensione CPU, DRAM, PCH 1,05 V,
PCH 1,5 V
50
Italiano
CD di
supporto
• Driver, Utilità, soware antivirus (versione di prova),
browser e barra degli strumenti Google Chrome, Start8 (30
giorni di prova), Xsplit, Killer Network Manager
Hardware
Monitor
• Sensore temperatura CPU/chassis
• Tachimetro CPU/chassis/ventola alimentazione
• Ventola silenziosa CPU/chassis (consente l'autoregolazio-
ne della velocità della ventola dello chassis mediante la
temperatura della CPU)
• Controllo multivelocità della ventola di CPU/chassis
• Monitoraggio tensione: +12 V, +5 V, +3,3 V, CPU Vcore
SO • Microso® Windows® 8.1 a 32-bit/8.1 a 64-bit/8 a 32-bit/8
a 64-bit/7 a 32-bit/7 a 64-bit
Certicazioni • FCC, CE, WHQL
• ErP/EuP Ready (è necessaria alimentazione ErP/EuP
ready)
* Per informazioni dettagliate sul prodotto, visitare il nostro sito Web:
http://www.asrock.com
Prestare attenzione al potenziale rischio previsto nella pratica di overclocking, inclusa
la regolazione delle impostazioni nel BIOS, l'applicazione di tecnologia di Untied
Overclocking o l'utilizzo di strumenti di overclocking di terze parti. L'overclocking
può inuenzare la stabilità del sistema o perno provocare danni ai componenti e ai
dispositivi del sistema. Occorre eseguirlo a proprio rischio e spese. Non ci riterremo
responsabili per possibili danni provocati da overclocking.
A causa della limitazione, l'eettiva dimensione della memoria può essere inferiore
a 4 GB per riservare l'uso del sistema ai sistemi operativi di Windows® a 32 bit. I
sistemi operativi Windows® a 64 bit non possiedono tali limitazioni. È possibile
utilizzare la RAM XFast di ASRock per utilizzare la memoria che Windows® non può
utilizzare.
51
Italiano
Fatal1ty B85 Killer Series
1.3 Impostazione jumper
L'illustrazione mostra in che modo vengono impostati i jumper. Quando il cappuc-
cio del jumper è posizionato sui pin, il jumper è "cortocircuitato". Se sui pin non è
posizionato alcun cappuccio del jumper, il jumper è "aperto". L'illustrazione mostra
un jumper a 3 pin i cui pin1 e pin2 sono "cortocircuitati" quando un cappuccio del
jumper è posizionato su questi 2 pin.
Jumper per azzerare la
CMOS
(CLRCMOS1)
(vedere pag. 1, n. 16)
CLRCMOS1 consente di azzerare i dati presenti nella CMOS. Per azzerare e
reimpostare i parametri del sistema a lla congurazione predenita, spegnere
il computer e scollegare il cavo di alimentazione dalla rete. Dopo aver atteso 15
secondi, utilizzare un cappuccio del jumper per cortocircuitare il pin2 e il pin3
su CLRCMOS1 per 5 secondi. Tuttavia, non azzerare la CMOS subito dopo aver
aggiornato il BIOS. Se è necessario azzerare la CMOS dopo l'aggiornamento del
BIOS, è necessario riavviare prima il sistema e in seguito spegnerlo prima di
eseguire l'operazione di azzeramento della CMOS. La password, la data, l 'ora e il
prolo predenito dell'utente saranno azzerati solo se viene rimossa la batteria
della CMOS.
Azzerare la CMOSpredenito
52
Italiano
1.4 Header e connettori sulla scheda
Header sul pannello del
sistema
(PANEL1 a 9 pin)
(vedere pag. 1, n. 11)
Collegare l'interruttore
dell'alimentazione, l'inter-
ruttore di reset e l'indica-
tore dello stato del sistema
sullo chassis su questo
header secondo la seguente
assegnazione dei pin.
Annotare i pin positivi e
negativi prima di collegare
i cavi.
PWRBTN (interruttore alimentazione):
collegare all'interruttore dell'alimentazione sul pannello anteriore dello chassis. È
possibile congurare il modo in cui spegnere il sistema utilizzando l'interruttore
dell'alimentazione.
RESET (interruttore di reset):
collegare all'interruttore di reset sul pannello anteriore dello chassis. Premere
l'interruttore di reset per riavviare il computer se il computer si blocca e non riesce ad
eseguire un normale riavvio.
PLED (LED alimentazione del sistema):
collegare all'indicatore di stato dell'alimentazione sul pannello anteriore dello chassis.
Il LED è acceso quando il sistema è in funzione. Il LED continua a lampeggiare
quando il sistema si trova nello stato di sospensione S1/S3. Il LED è spento quando il
sistema si trova nello stato di sospensione S4 o quando è spento (S5).
HDLED (LED di attività disco rigido):
collegare al LED di attività disco rigido sul pannello anteriore dello chassis. Il LED è
acceso quando il disco rigido sta leggendo o scrivendo dati.
Il design del pannello anteriore può cambiare a seconda dello chassis. Un modulo
di pannello anteriore è composto principalmente da interruttore di alimentazione,
interruttore di reset, LED di alimentazione, LED di attività disco rigido, altoparlante,
ecc. Quando si collega il modulo del pannello anteriore dello chassis a questo header,
accertarsi che le assegnazioni del lo e le assegnazioni del pin corrispondano corretta-
mente.
Gli header e i connettori sulla scheda NON sono jumper. NON posizionare cappucci
del jumper su questi header e connettori. Il posizionamento di cappucci del jumper su
header e connettori provocherà danni permanenti alla scheda madre.
GN D
R #ESE T
PW RBT N#
PL E D-
PL E D+
GN D
HDL E D-
HDL E D+
1
GN D
53
Italiano
Fatal1ty B85 Killer Series
Header LED di alimenta-
zione
(PLED1 a 3 pin)
(vedere pag. 1, n. 9)
Collegare il LED di alimen-
tazione chassis a questo he-
ader per
indicare lo stato di
alimentazione del sistema.
Connettori Serial ATA2
(SATA2_0:
vedere pag.1, n. 18)
(SATA2_1:
vedere pag.1, n. 17)
Questi due connettori
SATA2 supportano i cavi-
dati SATA per dispositivi di
archiviazione interna, con
una velocità di trasferimen-
to dati no a 3,0 Gb/s.
Connettori Serial ATA3
(SATA3_0:
vedere pag.1, n. 12)
(SATA3_1:
vedere pag. 1, n. 13)
(SATA3_2:
vedere pag. 1, n. 15)
(SATA3_3:
vedere pag.1, n. 14)
Questi quattro connettori
SATA3 supportano cavi
dati SATA per dispositivi di
archiviazione interna, con
una velocità di trasferimen-
to dati no a 6,0 Gb/s.
Header USB 2.0
(USB4_5 a 9 pin)
(vedere pag. 1, n. 19)
(USB6_7 a 9 pin)
(vedere pag. 1, n. 20)
Oltre alle quattro porte
USB 2.0 sul pannello I/O,
su questa scheda madre vi
sono due header. Ciascun
header USB 2.0 può sup-
portare due porte.
Header USB 3.0
(USB3_2_3 a 19 pin)
(vedere pag. 1, n. 8)
Oltre alle due porte USB 3.0
sul pannello I/O, su questa
scheda madre vi è un hea-
der. Ciascun header USB 3.0
può supportare due porte.
1
PLED+
PLED+
PLED-
SATA2_0
SATA2_1
SATA3_0SATA3_2
SATA3_1SATA3_3
1
In tA_ PB_ D+
Du m m y
In tA_ PB_ D-
GND
In tA_ PB_ SST X+
GND
In tA_ PB_ SST X-
In tA_ PB_ SSRX+
In tA_ PB_ SSRX-
VbusVbus
Vbus
In tA _ PA _ SS RX-
In tA _ PA _ SS RX+
GND
In tA _ PA _ SS T X-
In tA _ PA _ SS T X+
GND
In tA _ PA_D -
In tA _ PA_D +
DUMMY
GND
GND
P+
P-
U RSB _PW
P+
P-
U RSB _PW
1
54
Italiano
Header audio pannello
anteriore
(AUDIO1_HD a 9 pin)
(vedere pag. 1, n. 22)
Questo header serve a
collegare i dispositivi audio
al pannello audio anteriore.
Header altoparlante
chassis
(SPEAKER1 a 4 pin)
(vedere pag. 1, n. 10)
Collegare l'altoparlante del-
lo chassis a questo header.
Connettori ventola dello
chassis e di alimentazione
(CHA_FAN1 a 4 pin)
(vedere pag. 1, n. 16)
(CHA_FAN2 a 3 pin)
(vedere pag. 1, n. 24)
(CHA_FAN3 a 3 pin)
(vedere pag. 1, n. 23)
(PWR_FAN1 a 3 pin)
(vedere pag. 1, n. 7)
Collegare i cavi della
ventola ai connettori della
ventola e far corrispondere
il lo nero al pin di terra.
1. L'audio ad alta denizione supporta le funzioni Jack sensing, ma il lo del pannello
sullo chassis deve supportare HDA per funzionare correttamente. Seguire le
istruzioni presenti nel nostro manuale e nel manuale dello chassis per installare il
sistema.
2. Se si utilizza un pannello audio AC’97, installarlo sull'header audio del pannello
anteriore seguendo le fasi di seguito:
A. Collegare Mic_IN (MIC) a MIC2_L.
B. Collegare Audio_ R (RIN) a OUT2_R e Audio_ L (LIN) a OUT2_L.
C. Collegare Ground (GND) a Ground (GND).
D. MIC_ RET e OUT_RET servono soltanto per il pannello audio HD. Non è neces-
sario collegarli per il pannello audio AC’97.
E. Per attivare il microfono anteriore, andare alla scheda “MicAnt” nel pannello di
controllo Realtek e regolare il “Volume di registrazione”.
J_SENSE
OUT2_L
1
MIC_RET
PRESENCE#
GND
OUT2_R
MIC2_R
MIC2_L
OUT_RET
1
+5 V
DUM M Y
DUM M Y
SPEAKER
GN
D
+1 2V
CH A_FAN _SPEED
F
AN_ S PEED_CONTRO L
GND
+ 12V
CH A_ FAN_SP EED
55
Italiano
Fatal1ty B85 Killer Series
Connettori della ventola
della CPU
(CPU_FAN1 a 4 pin)
(vedere pag. 1, n. 3)
(CPU_FAN2 a 3 pin)
(vedere pag. 1, n. 2)
Questa scheda madre è
dotata di un connettore
per la ventola della CPU
(Ventola silenziosa) a 4 pin.
Se si decide di collegare una
ventola della CPU a 3 pin,
collegarla al pin 1-3.
Connettore di alimenta-
zione ATX
(ATXPWR1 a 24 pin)
(vedere pag. 1, n. 6)
Questa scheda madre è
dotata di un connettore
di alimentazione ATX a
24 pin. Per utilizzare un'ali-
mentazione ATX a 20 pin,
collegarla lungo il pin1 e il
pin 13.
Connettore di alimenta-
zione ATX da 12 V
(ATX12V1 a 8 pin)
(vedere pag. 1, n. 1)
Questa scheda madre è
dotata di un connettore di
alimentazione ATX da 12
V a 8 pin. Per utilizzare
un'alimentazione ATX a 4
pin, collegarla lungo il pin1
e il pin 5.
12
1
24
13
GN D
+12V
CPU_FAN_SPEED
GND
+12V
CPU_FAN_SPEED
FA
N_SPEED_CONTRO
56
Español
1 Introducción
Gracias por comprar la placa base ASRock Fatal1ty B85 Killer Series, una placa base
able fabricada según el rigurosísimo control de calidad de ASRock. Ofrece un
rendimiento excelente con un diseño resistente de acuerdo con el compromiso de
calidad y resistencia de ASRock.
1.1 Contenido del paquete
• Placa base ASRock Fatal1ty B85 Killer Series (Factor de forma ATX)
• Guía de instalación rápida de ASRock Fatal1ty B85 Killer Series
• CD de soporte de ASRock Fatal1ty B85 Killer Series
• 2 cables de datos Serie ATA (SATA) (Opcional)
• 1 escudo panel I/O
Ya que las especicaciones de la placa base y el soware del BIOS podrán ser actu-
alizados, el contenido que aparece en este manual estará sujeto a modicaciones sin
previo aviso. Si este manual sufre alguna modicación, la versión actualizada estará
disponible en el sitio web de ASRock sin previo aviso. Si necesita asistencia técnica
relacionada con esta placa base, visite nuestro sitio web para obtener información
especíca sobre el modelo que esté utilizando. Podrá encontrar las últimas tarjetas
VGA, así como la lista de compatibilidad de la CPU, en el sitio web de ASRock. Sitio
web de ASRock http://www.asrock.com.
57
Español
Fatal1ty B85 Killer Series
1.2 Especicaciones
Plataforma • Factor de forma ATX
• Diseño de los Condensadores: Premium Gold (Condensadores
de polímero conductor, de alta calidad, 100% fabricados en
Japón)
A-Style • Purity SoundTM
Caracter-
ísticas de
juego
Alimentación de CPU
• Conector de alimentación de alta densidad
Tarjeta VGA
• 15μGold Finger en ranura VGA PCIe (PCIE2)
Internet
• Qualcomm® Atheros® Killer
TM LAN
Audio
• Purity SoundTM
CPU • Compatible con 4.ª Generación de Intel® Core
TM i7 / i5 / i3 /
Xeon® / Pentium® / Celeron® en paquete LGA1150
• Diseño Digi Power
• Diseño de 6 fases de alimentación
• Compatible con la tecnología de Intel® Turbo Boost 2.0
Conjunto de
chips
• Intel® B85
• Compatible con Intel® Small Business Advantage 2.0
Memoria • Tecnología de memoria de Doble Canal DDR3
• 4 ranuras DDR3 DIMM
• Compatible con memoria no-ECC, sin búfer DDR3
1600/1333/1066
• Capacidad máxima de la memoria del sistema: 32GB (consulte
la ADVERTENCIA)
• Compatible con Extreme Memory Prole (XMP)1.3/1.2 de
Intel®
Ranura de
expansión
• 1 ranura PCI Express 3.0 x16 (PCIE2: modo x16)
• 1 ranura PCI Express 2.0 x16 (PCIE4: modo x4)
• 2 ranuras PCI Express 2.0 x1
• 3 ranuras PCI
• Compatible con 15μGold Finger (ranura PCIE2)
• Compatible con AMD Quad CrossFireXTM y CrossFireXTM
58
Español
Grácos
• La Tecnología visual integrada de grácos HD de Intel® y las
salidas de VGA son compatibles únicamente con procesadores
con GPU integrado.
• Compatible con la Tecnología visual integrada de grácos
HD de Intel®: Intel® Quick Sync Video con AVC, MVC (S3D)
y MPEG-2 Full HW Encode1, Intel® InTru
TM 3D, Intel® Clear
Video HD Technology, Intel® Insider
TM, Intel® HD Graphics
4600
• Pixel Shader 5.0, DirectX 11.1
• Memoria compartida máxima: 1792MB
• Tres opciones de salida VGA: D-Sub, DVI-D y HDMI
• Compatible con monitores triples
• Compatible con Tecnología HDMI con máxima resolución
hasta 4K × 2K (4096x2304) @ 24Hz
• Compatible con DVI-D con máxima resolución hasta
1920x1200 @ 60Hz
• Compatible con D-Sub con máxima resolución hasta
1920x1200 @ 60Hz
• Compatible con Auto Lip Sync, Deep Color (12bpc), xvYCC y
HBR (audio de alta velocidad de bits) con HDMI (requiere un
monitor compatible con HDMI)
• Compatible con función HDCP con puertos DVI-D y HDMI
• Compatible con reproducción Blu-ray (BD) Full HD de 1080p
con puertos DVI-D y HDMI
Audio • 7.1 Audio CH HD con Protección de contenido (Realtek
ALC1150 Audio Codec)
• Compatible con audio Blu-ray Premium
• Compatible con Purity Sound TM
- 115dB SNR DAC con amplicador diferencial
- TI® NE5532 (compatible con Amplicador de Auriculares
Premium de hasta 600 ohmios)
- Tecnología Direct Drive
- cubierta protectora de EMI (interferencias
electromagnéticas)
- Protección de aislamiento PCB (circuito impreso)
• Compatible con DTS Connect
LAN • PCIE p62-x1 LAN Gigabit 10/100/1000 Mb/s
• Qualcomm® Atheros® Killer
TM E2200 Series
• Compatible con Wake-On-LAN
• Compatible con Ethernet de consumo eciente de energía
802.3az
• Compatible con PXE
59
Español
Fatal1ty B85 Killer Series
Panel
trasero I/O
• 1 puerto de ratón/teclado PS/2
• 1 puerto D-Sub
• 1 puerto DVI-D
• 1 puerto HDMI
• 1 puerto de salida SPDIF óptica
• 3 puertos USB 2.0
• 1 puerto de ratón Fatal1ty (USB 2.0)
• 4 puertos USB 3.0
• 1 puerto LAN RJ-45 con LED (ACT/LINK LED y SPEED
LED)
• Conector de audio HD: Altavoz trasero / Central / Graves /
Entrada de línea / Altavoz frontal / Micrófono
Almace-
namiento
• 4 conectores SATA3 de 6,0 Gb/s, compatibles con las
funciones NCQ, AHCI y “Hot Plug”
• 2 conectores SATA2 de 3,0 Gb/s, compatibles con las
funciones NCQ, AHCI y “Hot Plug”
Conectores • 1 cabezal de indicador LED de alimentación
• 2 conectores de ventilador de la CPU (1 de 4 pines y 1 de
3 pines)
• 3 conectores de ventilador del chasis (1 de 4 pines y 2 de
3 pines)
• 1 conector de ventilador de alimentación (de 3 pines)
• 1 conector de alimentación ATX de 24 pines
• 1 conector de alimentación de 8 pines y 12V (conector de
alimentación de alta densidad)
• 1 conector de audio del panel frontal
• 2 cabezales USB 2.0 (compatibles con 4 puertos USB 2.0)
• 1 cabezal USB 3.0 (compatible con 2 puertos USB 3.0)
Caracter-
ísticas del
BIOS
• BIOS Legal UEFI AMI de 64Mb compatibles con interfaz
gráca de usuario multilingüe
• Eventos de reactivación conformes con ACPI 1.1
• Compatible con Jumper FREE
• Compatible con SMBIOS 2.3.1
• Multiajuste de voltaje de CPU, DRAM, PCH 1,05V, PCH 1,5V
CD de
soporte
• Controladores, Utilidades, Soware AntiVirus (Versión
de prueba), Explorador y Barra de herramientas de Google
Chrome, Start8 (Versión de prueba de 30 días), Xsplit, Killer
Network Manager
61
Español
Fatal1ty B85 Killer Series
1.3 Instalación de los puentes
La instalación muestra cómo deben instalarse los puentes. Cuando la tapa de puente
se coloca en los pines, el puente queda “Corto”. Si no coloca la tapa de puente en los
pines, el puente queda “Abierto”. La ilustración muestra un puente de 3 pines cuyo
pin 1 y pin 2 son “Cortos” cuando se coloca una tapa de puente en estos 2 pines.
Puente de borrado de
CMOS
(CLRCMOS1)
(consulte la pág.1, N.º 16)
CLRCMOS1 le permite borrar los datos del CMOS. Para borrar y restablecer los
parámetros del sistema a los valores predeterminados de instalación, apague el
ordenador y desenchufe el cable de alimentación de la toma de alimentación.
Después de esperar 15 segundos, utilice un tapa de puente para acortar el pin2 y
el pin3 en el CLRCMOS1 durante 5 segundos. Sin embargo, no borre el CMOS
justo después de que haya actualizado el BIOS. Si necesita borrar el CMOS cuando
acabe de actualizar el BIOS, deberá arrancar el sistema primero y, a continuación,
deberá apagarlo antes de que realice el borrado del CMOS. Tenga en cuenta
que la contraseña, la fecha, la hora y el perl de usuario predeterminado serán
eliminados únicamente si se retira la pila del CMOS.
Borrado de CMOSPredeterminado
62
Español
1.4 Conectores y cabezales incorporados
Cabezal del panel del
sistema
(PANEL1 de 9 pines)
(consulte la pág.1, N.º 11)
Conecte el interruptor
de alimentación,
restablezca el interruptor
y el indicador del
estado del sistema del
chasis a los valores de
este cabezal, según los
valores asignados a los
pines como se indica a
continuación. Cerciórese
de cuáles son los pines
positivos y los negativos
antes de conectar los
cables.
PWRBTN (Interruptor de alimentación):
conéctelo al interruptor de alimentación del panel frontal del chasis. Deberá congu-
rar la forma en la que su sistema se apagará mediante el interruptor de alimentación.
RESET (Interruptor de reseteo):
conéctelo al interruptor de reseteo del panel frontal del chasis. Pulse el interruptor
de reseteo para resetear el ordenador si éste está bloqueado y no se puede reiniciar de
forma normal.
PLED (Indicador LED de alimentación del sistema):
conéctelo al indicador del estado de la alimentación del panel frontal del chasis. El
indicador LED permanece encendido cuando el sistema está funcionando. El indica-
dor LED parpadea cuando el sistema se encuentra en estado de suspensión S1/S3. El
indicador LED se apaga cuando el sistema se encuentra en estado de suspensión S4 o
está apagado (S5).
HDLED (Indicador LED de actividad en el disco duro):
conéctelo al indicador LED de actividad en el disco duro del panel frontal del chasis.
El indicador LED permanece encendido cuando el disco duro está leyendo o escribi-
endo datos.
El diseño del panel frontal puede ser diferente dependiendo del chasis. Un módulo de
panel frontal consta principalmente de: interruptor de alimentación, interruptor de
reseteo, indicador LED de alimentación, indicador LED de actividad en el disco duro,
altavoz, etc. Cuando conecte su módulo del panel frontal del chasis a este cabezal,
asegúrese de que las asignaciones de los cables y los pines coinciden correctamente.
Los cabezales y conectores incorporados NO son puentes. NO coloque tapas de puente
sobre estos cabezales y conectores. Si coloca tapas de puente sobre los cabezales y
conectores dañará de forma permanente la placa base.
GND
R #ESET
PWRBTN#
PLED-
PLED+
GND
HDLED-
HDLED+
1
GND
63
Español
Fatal1ty B85 Killer Series
Cabezal de indicador LED
de alimentación
(PLED1 de 3 pines)
(consulte la pág.1, N.º 9)
Conecte el indicador LED
de alimentación del chasis
a este cabezal para
indicar
el estado de alimentación
del sistema.
Conectores Serie ATA2
(SATA2_0:
consulte la pág.1, N.º 7)
(SATA2_1:
consulte la pág.1, N.º 8)
Estos dos conectores
SATA2 son compatibles
con cables de datos SATA
para dispositivos de
almacenamiento interno
con una velocidad de
transferencia de datos de
hasta 3,0 Gb/s.
Conectores Serie ATA3
(SATA3_0:
consulte la pág.1,
N.º 12)(SATA3_1:
consulte la pág.1,
N.º 13)
(SATA3_2:
consulte la pág.1, N.º 15)
(SATA3_3:
consulte la pág.1, N.º 14)
Estos cuatro conectores
SATA3 son compatibles
con cables de datos SATA
para dispositivos de
almacenamiento interno
con una velocidad de
transferencia de datos de
hasta 6,0 Gb/s.
Cabezales USB 2.0
(USB4_5 de 9 pines)
(consulte la pág.1, N.º 19)
(USB6_7 de 9 pines)
(consulte la pág.1, N.º 20)
Además de cuatro puertos
USB 2.0 en el panel I/O,
esta placa base contiene
dos cabezales. Cada
cabezal USB 2.0 admite
dos puertos.
Cabezales USB 3.0
(USB3_2_3 de 19 pines)
(consulte la pág.1, N.º 8)
Además de dos puertos
USB 3.0 en el panel I/O,
esta placa base contiene
un cabezal. Cada cabezal
USB 3.0 admite dos
puertos.
1
PLED+
PLED+
PLED-
SATA2_0
SATA2_1
SATA3_0SATA3_2
SATA3_1SATA3_3
1
IntA_PB_D+
Dummy
IntA_PB_D-
GND
IntA_PB_SSTX+
GND
IntA_PB_SSTX-
IntA_PB_SSRX+
IntA_PB_SSRX-
VbusVbus
Vbus
IntA_PA_SSRX-
IntA_PA_SSRX+
GND
IntA_PA_SSTX-
IntA_PA_SSTX+
GND
IntA_PA_D-
IntA_PA_D+
DUMMY
GND
GND
P+
P-
U RSB_PW
P+
P-
U RSB_PW
1
64
Español
Cabezal de audio del
panel frontal
(HD_AUDIO1 de 9 pines)
(consulte la pág.1, N.º 22)
Este cabezal se utiliza
para conectar dispositivos
de audio al panel de audio
frontal.
Cabezal de altavoces del
chasis
(SPEAKER1 de 4 pines)
(consulte la pág.1, N.º 10)
Conecte el altavoz del
chasis a este cabezal.
Conectores del ventilador
de alimentación y del
chasis
(CHA_FAN1 de 4 pines)
(consulte la pág.1, N.º 16)
(CHA_FAN2 de 3 pines)
(consulte la pág.1, N.º 24)
(CHA_FAN3 de 3 pines)
(consulte la pág.1, N.º 23)
(PWR_FAN1 de 3 pines)
(consulte la pág.1, N.º 7)
Conecte los cables del
ventilador a los conectores
del ventilador y haga
coincidir el cable negro
con el pin de conexión a
tierra.
1. El Audio de Alta Denición (HDA, en inglés) es compatible con el método de sensor
de conectores, sin embargo, el cable del panel del chasis deberá ser compatible con
HDA para que pueda funcionar correctamente. Siga las instrucciones que se indican
en nuestro manual y en el manual del chasis para instalar su sistema.
2. Si utiliza un panel de audio AC’97, instálelo en el cabezal de audio del panel frontal
siguiendo los siguientes pasos:
A. Conecte Mic_IN (MIC) a MIC2_L.
B. Conecte Audio_R (RIN) a OUT2_R y Audio_L (LIN) a OUT2_L.
C. Conecte Ground (conexión a tierra) (GND) a Ground (GND).
D. MIC_RET y OUT_RET se utilizan únicamente para el panel de audio HD. No es
necesario que los conecte en el panel de audio AC’97.
E. Para activar el micrófono frontal, vaya a la cha “micrófono frontal” (FrontMic)
en el panel de control de Realtek y ajuste el “Volumen de grabación” (Recording
Volume).
J_SENSE
OUT2_L
1
MIC_RET
PRESENCE#
GND
OUT2_R
MIC2_R
MIC2_L
OUT_RET
1
+5V
DUMMY
DUMMY
SPEAKER
GN
D
+12V
CHA_FAN_SPEED
F
AN_SPEED_CONTROL
GND
+ 12V
CHA_ FAN_SPEED
65
Español
Fatal1ty B85 Killer Series
Conectores del ventilador
de la CPU
(CPU_FAN1 de 4 pines)
(consulte la pág.1, N.º 3)
(CPU_FAN2 de 3 pines)
(consulte la pág.1, N.º 2)
Esta placa base contiene
un conector de ventilador
(ventilador silencioso) de
CPU de 4 pines. Si tiene
pensando conectar un
ventilador de CPU de 3
pines, conéctelo al Pin 1-3.
Conector de alimentación
ATX
(ATXPWR1 de 24 pines)
(consulte la pág.1, N.º 6)
Esta placa base
contiene un conector de
alimentación ATX de 24
pines. Para utilizar una
toma de alimentación
ATX de 20 pines,
conéctela en los Pines del
1 al 13.
Conector de alimentación
ATX de 12V
(ATX12V1 de 8 pines)
(consulte la pág.1, N.º 1)
Esta placa base
contiene un conector de
alimentación ATX de 12V
y 8 pines. Para utilizar
una toma de alimentación
ATX de 4 pines, conéctela
en los Pines del 1 al 5.
12
1
24
13
GND
+12V
CPU_FAN_SPEED
GND
+12V
CPU_FAN_SPEED
FAN_SPEED_CONTROL
66
Русский
1 Введение
Благодарим вас за приобретение надежной материнской платы ASRock
Fatal1ty B85 Killer, выпускаемой под постоянным строгим контролем ком-
пании ASRock. Эта материнская плата обеспечивает великолепную про-
изводительность и характеризуется прочной конструкцией в соответствии
стребованиями компании ASRock в отношении качества и долговечности.
1.1 Комплект поставки
• Материнская плата ASRock Fatal1ty B85 Killer (форм-фактор ATX)
• Краткое руководство по установке ASRock Fatal1ty B85 Killer
• Диск с ПО для ASRock Fatal1ty B85 Killer
• 2 х кабеля передачи данных Serial ATA (SATA) (приобретаются отдельно)
• 1 х экран панели с портами ввода-вывода
По причине обновления спецификации на материнскую платформу и про-
граммного обеспечения BIOS содержимое настоящего руководства может
быть изменено без предварительного уведомления. При изменении содержимого
настоящего руководства его обновленная версия будет доступна на веб-сайте
ASRock без предварительного уведомления. При необходимости технической
поддержки, связанной с материнской платой, посетите веб-сайт и найдите
на нем информацию о модели используемой вами материнской платы. На веб-
сайте ASRock также можно найти самый последний перечень поддерживаемых
VGA-карт и ЦП. Веб-сайт ASRock http://www.asrock.com.
67
Русский
Fatal1ty B85 Killer Series
1.2 Спецификация
Платформа • Форм-фактор ATX
• Конструкция Premium Gold Capacitor (с использованием
высококачественных конденсаторов из проводящих по-
лимеров производства Японии)
A-Style • Purity SoundTM
Игровое
оборудова-
ние
Питание ЦП
• Высокоплотный разъем питания
Карта VGA
• 15μGold Finger в гнезде VGA PCIe (PCIE2)
Интернет
• Qualcomm® Atheros® Killer
TM LAN
Аудио
• Purity SoundTM
ЦП • Поддержка процессоров 4-го поколения Intel® Core
TM i7 /
i5 / i3 / Xeon® / Pentium® / Celeron® в исполнении LGA1150
• Digi Power Design
• Система питания 6
• Поддержка технологии Intel® Turbo Boost 2.0
Чипсет • Intel® B85
• Поддержка Intel® Small Business Advantage 2.0
Память • Двухканальная память DDR3
• 4 х гнездо DDR3 DIMM
• Поддержка модулей памяти DDR3 1600/1333/1066 Non-
ECC Unbuered
• Максимальный объем системной памяти: 32 Гб (см.
«ПРЕДОСТЕРЕЖЕНИЕ»)
• Поддержка Intel® Extreme Memory Prole (XMP)1.3/1.2
Гнезда рас-
ширения
• 1 x PCI Express 3.0 x16 гнезд (PCIE2: режим x16)
• 1 x PCI Express 2.0 x16 гнезд (PCIE4: режим x4)
• 2 x PCI Express 2,0 x1
• 3 x гнездо PCI
• Поддержка 15μGold Finger (гнездо PCIE2)
• Поддержка AMD Quad CrossFireXTM и CrossFireXTM
68
Русский
Графиче-
ская
система
• Поддержка выходных сигналов Intel® HD Graphics Built-
in Visuals и VGA возможна только при использовании
процессоров со встроенными графическими процессо-
рами.
• Поддержка встроенных технологий визуализации Intel®
HD Graphics: Intel® Quick Sync Video с AVC, MVC (S3D)
и MPEG-2 Full HW Encode1, Intel® InTru
TM 3D, Intel® Clear
Video HD Technology, Intel® Insider
TM, Intel® HD Graphics
4600
• Pixel Shader 5.0, DirectX 11.1
• Максимальный объем совместно используемой памяти:
1792 Мб
• Три выхода VGA: D-Sub, DVI-D и HDMI
• Поддержка работы с тремя мониторами
• Поддержка технологии HDMI с максимальным разреше-
нием до 4K × 2K (4096x2304) при 24 Гц
• Поддержка DVI-D с максимальным разрешением до
1920x1200 при 60 Гц
• Поддержка D-Sub с максимальным разрешением до
1920x1200 при 60 Гц
• Поддержка Auto Lip Sync, Deep Color (12bpc), xvYCC и
HBR (High Bit Rate Audio) по HDMI (необходим HDMI-
совместимый монитор)
• Поддержка функции HDCP через порты DVI-I и HDMI
• Поддержка воспроизведения Full HD 1080p Blu-ray (BD)
через порты DVI-D и HDMI
Аудио • 7.1-канальный звук высокой четкости HD Audio с защи-
той данных (аудиокодек Realtek ALC1150)
• Поддержка Premium Blu-ray Audio
• Поддержка Purity Sound TM
- 115 дБ SNR DAC с различными усилителями
- TI® NE5532 (поддержка усилителя Premium Headset
Amplier до 600 Ом)
- Технология Direct Drive Technology
- Экранированная крышка EMI
- Изолированное экранирование PCB
• Поддержка DTS-подключения
69
Русский
Fatal1ty B85 Killer Series
ЛВС • PCIE p73-x1 Gigabit LAN 10/100/1000 Мб/с
• Qualcomm® Atheros® Killer
TM E2200 Серия
• Поддержка Wake-On-LAN
• Поддержка Energy Ecient Ethernet 802.3az
• Поддержка PXE
Порты
ввода-
вывода
на задней
панели
• 1 x PS/2 для мыши/клавиатуры
• 1 x D-Sub
• 1 x DVI-D
• 1 x HDMI
• 1 x оптический выходной SPDIF
• 3 x USB 2.0
• 1 x Fatal1ty для мыши (USB 2.0)
• 4 x USB 3.0
• 1 x RJ-45 для ЛВС с СИД (СИД ACT/LINK и МИД SPEED)
• Разъемы HD Audio: задние динамики / центральный
динамик / сабвуфер / линейный вход / передние динами-
ки / микрофон
Запоми-
нающие
устройства
• 4 x разъем SATA3 6,0 Гб/с, поддержка функций NCQ,
AHCI и «горячей» замены
• 2 x разъем SATA2 3,0 Гб/с, поддержка функций NCQ,
AHCI и «горячей» замены
Разъемы • 1 x колодка светодиодного индикатора питания
• 2 x разъем для вентилятора ЦП (1 х 4-контактный, 1 х
3-контактный)
• 3 x разъема для вентилятора корпуса (1 х 4-контактный,
2 х 3-контактный)
• 1 x разъем для вентилятора блока питания (3-контакт-
ный)
• 1 х разъем питания АТХ (24-контактный)
• 1 х 8-контактный разъем питания 12 В (8-контактный)
(разъем High-Density Power Connector)
• 1 x аудиоразъем на передней панели
• 2 x колодки USB 2.0 (поддержка 4 портов USB 2.0)
• 1 x колодка USB 3.0 (поддержка 2 портов USB 3.0)
70
Русский
Особенно-
сти BIOS
• 64 Мб AMI UEFI Legal BIOS с поддержкой многоязычно-
го ГИП
• Совместимость с управлением энергопотреблением по
ACPI 1.1
• Поддержка функции JumperFree
• Поддержка SMBIOS 2.3.1
• Регулировка напряжений ЦП, DRAM, PCH 1,05 В, PCH
1,5 В
Диск с ПО • Драйвера, утилиты, антивирусное ПО (демоверсия), бра-
узер и панель инструментов Google Chrome, Start8 (демо-
версия на 30 дней), Xsplit, Killer Network Manager
Контроль
оборудова-
ния
• Датчик температуры ЦП/корпуса
• Тахометр вентиляторов ЦП/корпуса/блока питания
• Малошумящий вентилятор ЦП/корпуса (с автоматиче-
ской регулировкой оборотов по температуре ЦП)
• Управление оборотами вентилятора ЦП/корпуса
• Контроль напряжения: +12 В, +5 В, +3,3 В, ЦП Vcore
ОС • Microso® Windows® 8.1 32-разрядная / 8.1 64-разряд-
ная / 8 32-разрядная / 8 64-разрядная / 7 32-разрядная / 7
64-разрядная
Сертифи-
кация
• FCC, CE, WHQL
• Совместимость с ErP/EuP (необходим блок питания,
соответствующий стандарту ErP/EuP)
* Для получения дополнительной информации об изделии посетите наш веб-сайт:
http://www.asrock.com
Следует учитывать, что разгон процессора, включая изменение настроек
BIOS, применение технологии Untied Overclocking Technology и использование
инструментов разгона независимых производителей, сопряжен с определен-
ным риском. Разгон процессора может повлиять на стабильность системы
или даже привести к повреждению ее компонентов и устройств. Вы выпол-
няете разгон процессора на ваш собственный риск и за свой счет. Мы не несем
ответственность за возможный ущерб, вызванный разгоном процессора.
В связи с ограничением при работе под 32-разрядной ОС Windows® факти-
ческий объем памяти может быть меньше 4 Гбайт. Для 64-разрядных ОС
Windows® таких ограничений нет. Для использования той памяти, которую
ОС Windows® не может использовать, используйте ASRock XFast RAM.
71
Русский
Fatal1ty B85 Killer Series
1.3 Установка перемычек
Установка перемычек показана на рисунке. При установке колпачковой пере-
мычки на контакты перемычка «замкнута». Если колпачковая перемычка
на контакты не установлена, перемычка «разомкнута». На рисунке показана
3-контактная перемычка с замкнутыми контактами 1 и 2 при установке на
них колпачковой перемычки.
Перемычка сброса
настроек CMOS
(CLRCMOS1)
(См. стр. 1, № 16)
CLRCMOS1 используется для удаления данных CMOS. Чтобы сбросить
и обнулить параметры системы на настройки по умолчанию, выключите
компьютер и извлеките отключите кабель питания от источника питания.
Подождите 15 секунд и перемычкой замкните контакты 2 и 3 на CLRCMOS1
на 15 секунд. Не сбрасывайте настройки CMOS сразу после обновления
BIOS. При необходимости сбросить настройки CMOS сразу после обнов-
ления BIOS сначала перезагрузите систему, а затем выключите компьютер
перед сбросом настроек CMOS. Учтите, что пароль, дата, время и профиль
пользователя по умолчанию сбрасываются только в том случае, если из-
влечь батарею CMOS.
Сброс настроек CMOSпо умолчанию
72
Русский
1.4 Колодки и разъемы, расположенные на материнской
плате
Колодка системной
панели
(9-контактная, PANEL1)
(См. стр. 1, № 11)
Подключите рас-
положенные на корпусе
выключатель питания,
кнопку перезагрузки и
индикатор состояния
системы к этой колодке
в соответствии с рас-
пределением контактов,
приведенным ниже.
Перед подключением
кабелей определите
положительный и от-
рицательный контакты.
PWRBTN (кнопка питания):
Подключение кнопки питания, расположенной на передней панели корпуса.
Можно настроить порядок выключения системы с использованием кнопки
питания.
RESET (кнопка перезагрузки):
Подключение кнопки перезагрузки системы, расположенной на передней пане-
ли корпуса. Нажмите кнопку перезагрузки, чтобы перезапустить компьютер,
если он завис и нормальный запуск невозможен.
PLED (светодиодный индикатор питания системы):
Подключение индикатора состояния, расположенного на передней панели
корпуса. Светодиодный индикатор горит, когда система работает. Когда си-
стема находится в режиме ожидания S1/S3, светодиод мигает. Когда система
находится в режиме ожидания S4 или выключена (S5), светодиод не горит.
HDLED (светодиодный индикатор работы жесткого диска):
Подключение светодиодного индикатора работы жесткого диска, располо-
женного на передней панели корпуса. Светодиодный индикатор горит, когда
жесткий диск выполняет считывание или запись данных.
Передняя панель может быть разной на разных корпусах. В основном передняя
панель включает в себя кнопку питания, кнопку перезагрузки, светодиодный
индикатор питания, светодиодный индикатор работы жесткого диска,
динамик и т. д. При подключении передней панели к этой колодке правильно
подключайте провода к контактам.
Расположенные на материнской плате колодки и разъемы перемычками НЕ
являются. НЕ устанавливайте на эти колодки и разъемы колпачковые пере-
мычки. Установка колпачковых перемычек на эти колодки и разъемы может
вызвать неустранимое повреждение материнской платы.
GND
R #ESET
PWRBTN#
PLED-
PLED+
GND
HDLED-
HDLED+
1
GND
73
Русский
Fatal1ty B85 Killer Series
Колодка светодиодного
индикатора питания
(3-контактная, PLED1)
(См. стр. 1, № 9)
Подключите светодиод-
ный индикатор питания
корпуса к этой колод-
ке,
чтобы обеспечить
индикацию состояния
питания системы.
Разъемы Serial ATA2
(SATA2_0:
см. стр.1, № 18)
(SATA2_1:
см. стр.1, № 17)
Эти два разъема SATA2
предназначены для
подключения кабелей
SATA внутренних запо-
минающих устройств
для передачи данных со
скоростью до 3,0 Гб/с.
Разъемы Serial ATA3
(SATA3_0:
см. стр.1, № 12)
(SATA3_1:
(См. стр. 1, № 13)
(SATA3_2:
(См. стр. 1, № 15)
(SATA3_3:
см. стр.1, № 14)
Эти четыре разъемов
SATA3 предназначе-
ны для подключения
кабелей SATA внутрен-
них запоминающих
устройств для передачи
данных со скоростью до
6,0 Гб/с.
Колодки USB 2.0.
(9-контактная, USB4_5)
(См. стр. 1, № 19)
(9-контактная, USB6_7)
(См. стр. 1, № 20)
Кроме четырех портов
USB 2.0 на панели ввода-
вывода на материнской
плате также есть две ко-
лодки. Каждая колодка
USB 2.0 может поддер-
живать два порта.
Колодки USB 3.0.
(19-контактная,
USB3_2_3)
(См. стр. 1, № 8)
Кроме два портов USB
3.0 на панели ввода-
вывода на материнской
плате также есть одна
колодка. Каждая колод-
ка USB 3.0 может под-
держивать два порта.
1
PLED+
PLED+
PLED-
SATA2_0
SATA2_1
SATA3_0SATA3_2
SATA3_1SATA3_3
1
IntA_PB_D+
Dummy
IntA_PB_D-
GND
IntA_PB_SSTX+
GND
IntA_PB_SSTX-
IntA_PB_SSRX+
IntA_PB_SSRX-
VbusVbus
Vbus
IntA_PA_SSRX-
IntA_PA_SSRX+
GND
IntA_PA_SSTX-
IntA_PA_SSTX+
GND
IntA_PA_D-
IntA_PA_D+
DUMMY
GND
GND
P+
P-
U RSB_PW
P+
P-
U RSB_PW
1
74
Русский
Аудиоколодка передней
панели
(9-контактная, HD_
AUDIO1)
(См. стр. 1, № 22)
Эта колодка предна-
значена для подключе-
ния аудиоустройств к
передней аудиопанели.
Колодка динамика
корпуса
(4-контактная,
SPEAKER1)
(См. стр. 1, № 10)
Предназначена для
подключения динамика
корпуса.
Разъемы для вентиля-
торов корпуса и блока
питания
(4-контактный, CHA_
FAN1)
(См. стр. 1, № 16)
(3-контактный, CHA_
FAN2)
(См. стр. 1, № 24)
(3-контактный, CHA_
FAN3)
(См. стр. 1, № 23)
(3-контактный, PWR_
FAN1)
(См. стр. 1, № 7)
Предназначены для
подключения кабелей
разъемов вентиляторов
и подключения черного
провода к заземлению.
1. Аудиосистема высокого разрешения поддерживает функцию распознавания
разъема, но для е правильной работы необходимо, чтобы провод панели
корпуса поддерживал передачу сигналов HDA. Инструкции по установке
системы см. в этом руководстве и руководстве на корпус.
2. При использовании аудиопанели AC’97 подключите ее к аудиоколодке перед-
ней панели, как указано далее:
A. Подключите Mic_IN (MIC) к MIC2_L.
B. Подключите Audio_R (RIN) к OUT2_R, Audio_L (LIN) к OUT2_L.
C. Подключите провод заземления (GND) к контакту заземления (GND).
D. Контакты MIC_RET и OUT_RET используются только для аудиопанели
высокого разрешения. При использовании аудиопанели AC’97 их подключать
не нужно.
E. Чтобы активировать передний микрофон, перейдите на вкладку FrontMic
панели управления Realtek и отрегулируйте параметр Recording Volume
(Громкость записи).
J_SENSE
OUT2_L
1
MIC_RET
PRESENCE#
GND
OUT2_R
MIC2_R
MIC2_L
OUT_RET
1
+5V
DUMMY
DUMMY
SPEAKER
GN
D
+12V
CHA_FAN_SPEED
F
AN_SPEED_CONTROL
GND
+ 12V
CHA_ FAN_SPEED
75
Русский
Fatal1ty B85 Killer Series
Разъемы вентиляторов
ЦП
(4-контактный, CPU_
FAN1)
(См. стр. 1, № 3)
(3-контактный, CPU_
FAN2)
(См. стр. 1, № 2)
Эта материнская плата
снабжена 4-контактным
разъемом для мало-
шумящего вентилятора
ЦП. Если вы собирае-
тесь подключить 3-кон-
тактный вентилятор
охлаждения процессора,
подключайте его к кон-
тактам 1-3.
Разъем питания АТХ
(24-контактный,
ATXPWR1)
(См. стр. 1, № 6)
Эта материнская плата
снабжена 24-контактным
разъемом питания АТХ.
Чтобы использовать
20-контактный разъем
питания ATX, подклю-
чите его вдоль контакта
1 и контакта 13.
Разъем питания АТХ
12 В
(8-контактный,
ATX12V1)
(См. стр. 1, № 1)
Эта материнская плата
снабжена 8-контактным
разъемом питания АТХ
12 В. Чтобы исполь-
зовать 4-контактный
разъем питания ATX,
подключите его вдоль
контакта 1 и контакта 5.
12
1
24
13
GND
+12V
CPU_FAN_SPEED
GND
+12V
CPU_FAN_SPEED
FAN_SPEED_CONTROL
76
Português
1 Introdução
Obrigado por ter comprado a placa principal ASRock Fatal1ty B85 Killer Series,
uma placa principal ável produzida sob os rigorosos critérios de controlo de qua-
lidade da ASRock. Esta placa principal oferece um excelente desempenho com um
design robusto em conformidade com o compromisso da ASRock em fabricarpro-
dutos de qualidade e resistentes.
1.1 Conteúdo da embalagem
• Placa principal ASRock Fatal1ty B85 Killer Series (Formato ATX)
• Guia de instalação rápida da ASRock Fatal1ty B85 Killer Series
• CD de suporte da ASRock Fatal1ty B85 Killer Series
• 2 x Cabos de dados Serial ATA (SATA) (Opcional)
• 1 x Painel de E/S
Dado que as especicações da placa principal e o soware do BIOS poderão ser actu-
alizados, o conteúdo deste manual estará sujeito a alterações sem aviso prévio. Caso
ocorram modicações a este manual, a versão actualizada estará disponível no Web
site da ASRock sem aviso prévio. Se necessitar de assistência técnica relacionada com
esta placa principal, visite o nosso Web site para obter informações especícas acerca
do modelo que está a utilizar. Também poderá encontrar a lista de placas VGA e CPU
mais recentes suportadas no Web site da ASRock. Web site da ASRock
http://www.asrock.com.
77
Português
Fatal1ty B85 Killer Series
1.2 Especicações
Plataforma • Formato ATX
• Design de condensadores banhados a ouro de alta qualidade
(Condensadores de polímeros condutores de alta qualidade
100% fabricados no Japão)
Estilo A • Purity SoundTM
Armadura
para jogos
Potência de CPU
• Conector de alimentação de alta densidade
Placa VGA
• Contactos banhados a ouro de 15μ em ranhura VGA PCIe
(PCIE2)
Internet
• Qualcomm® Atheros® Killer
TM LAN
Audio
• Purity SoundTM
CPU • Suporta processadores Intel® Core
TM i7 / i5 / i3 / Xeon® /
Pentium® / Celeron® de 4ª geração em socket LGA1150
• Design Digi Power
• Design com 6 fases de alimentação
• Suporta a tecnologia Intel® Turbo Boost 2.0
Chipset • Intel® B85
• Suporta a tecnologia Intel® Small Business Advantage 2.0
Memória • Tecnologia de memória DDR3 de dois canais
• 4 x ranhuras DIMM DDR3
• Suporta memória DDR3 1600/1333/1066, não ECC, sem
memória intermédia
• Capacidade máxima da memória do sistema: 32GB (consultar
AVISO)
• Suporta Extreme Memory Prole (XMP)1.3/1.2 da Intel®
Ranhuras
de expan-
são
• 1 x ranhura PCI Express 3.0 x16 (PCIE2: modo x16)
• 1 x ranhura PCI Express 2.0 x16 (PCIE4: modo x4)
• 2 x ranhura PCI Express 2.0 x1
• 3 x ranhuras PCI
• Suporta 15μGold Finger (ranhura PCIE2)
• Suporta AMD Quad CrossFireXTM e CrossFireX
TM
78
Português
Grácos
• Os grácos incorporados Intel® HD e as saídas VGA apenas
podem ser suportados com processadores com GPU integra-
da.
• Suporta grácos incorporados Intel® HD: Intel® Quick Sync
Video com AVC, MVC (S3D) e MPEG-2 Full HW Encode1,
Intel® InTru
TM 3D, Tecnologia Intel® Clear Video HD, Intel®
InsiderTM, Grácos Intel® HD 4600
• Pixel Shader 5.0, DirectX 11.1
• Memória partilhada máxima de 1792MB
• Três opções de saída VGA: D-Sub, DVI-D e HDMI
• Suporta conguração com três monitores
• Suporta tecnologia HDMI com resolução máxima de até 4K ×
2K (4096x2304) @ 24Hz
• Suporta DVI-D com resolução máxima de até 1920x1200 @
60Hz
• Suporta D-Sub com resolução máxima de até 1920x1200 @
60Hz
• Suporta Auto sincronização labial, Deep Color (12bpc),
xvYCC e HBR (High Bit Rate Audio) com HDMI (É necessá-
rio um monitor compatível com HDMI)
• Suporta a função HDCP com portas DVI-D e HDMI
• Suporta reprodução Blu-ray (BD) Full HD a 1080p com portas
DVI-D e HDMI
Áudio • Áudio HD de 7.1 canais com protecção de conteúdo (Codec de
áudio Realtek ALC1150)
• Suporte áudio Blu-ray superior
• Suporta Purity Sound TM
- 115dB SNR DAC com amplicador diferencial
- TI® NE5532 (suporta amplicador de auscultadores premium
até 600 Ohms)
- Tecnologia de accionamento directo
- cobertura de blindagem EMI
- Blindagem de isolamento PCB
• Suporta a tecnologia DTS Connect
79
Português
Fatal1ty B85 Killer Series
LAN • PCIE p83-x1 LAN Gigabit a 10/100/1000 Mb/s
• Qualcomm® Atheros® Killer
TM E2200 Series
• Suporta Wake-On-LAN
• Suporta IEEE 802.3az
• Suporta PXE
E/S do pai-
nel traseiro
• 1 x 1 x Porta PS/2 para rato/teclado
• 1 x Porta D-Sub
• 1 x Porta DVI-D
• 1 x Porta HDMI
• 1 x Porta de saída SPDIF óptica
• 3 x portas USB 2.0
• 1 x Porta para rato Fatal1ty (USB 2.0)
• 4 x Portas USB 3.0
• 1 x Porta LAN RJ-45 com LED (LED ACT/LIGAÇÃO e LED
DE VELOCIDADE)
• Ficha de áudio HD: Altifalante traseiro / Central / Graves /
Entrada de linha / Altifalante frontal / Microfone
Armazena-
mento
• 4 x conectores SATA3 a 6,0 Gb/s, com suporte para NCQ,
AHCI e funções “Hot Plug”
• 2 x conectores SATA2 a 3,0 Gb/s, com suporte para NCQ,
AHCI e funções “Hot Plug”
Conector • 1 x Conector para LED de alimentação
• 2 x Conectores da ventoinha da CPU (1 x 4 pinos, 1 x 3 pinos)
• 3 x Conectores da ventoinha do chassis (1 x 4 pinos, 2 x 3
pinos)
• 1 x Conector da ventoinha de alimentação (3 pinos)
• 1 x conector de alimentação de 24 pinos ATX
• 1 x conector de alimentação de 12V com 8 pinos (Conector de
alimentação de alta densidade)
• 1 x conector de áudio do painel frontal
• 2 x terminais USB 2.0 (suporte para 4 portas USB 2.0)
• 1 x terminal USB 3.0 (suporte para 2 portas USB 3.0)
80
Português
Funciona-
lidades da
BIOS
• BIOS UEFI ocial da AMI com 64Mb com suporte de interfa-
ce multilíngue
• Eventos de reactivação compatíveis com ACPI 1.1
• Suporta jumperfree
• Suporta SMBIOS 2.3.1
• Multi-ajuste de tensão de CPU, DRAM, PCH 1,05V, PCH 1,5V
CD de
suporte
• Controladores, Utilitários, Soware antivírus (versão de ava-
liação), Navegador e Barra de Ferramentas Google Chrome,
Start8 (30 dias de avaliação), Xsplit, Killer Network Manager
Monitor de
hardware
• Sensor de temperatura de CPU/Chassis
• Taquímetro de ventoinha de CPU/Chassis/Alimentação
• Ventoinha de CPU/Chassis silenciosa (Permite o ajuste
automático da velocidade da ventoinha do chassis através da
temperatura da CPU)
• Controlo de velocidade da ventoinha de CPU/Chassis
• Monitorização da tensão: +12V, +5V, +3,3V, CPU Vcore
Sistema
Operativo
• Compatível com Microso® Windows® 8.1 32-bits / 8.1 64-bits/
8 32-bits / 8 64-bits / 7 32-bits / 7 64-bits
Certica-
ções
• FCC, CE, WHQL
• Preparada para ErP/EuP (é necessária uma fonte de alimenta-
ção preparada para ErP/EuP)
* Para obter informações detalhadas acerca do produto, visite o nosso Web site:
http://www.asrock.com
Tenha em atenção que o overclocking inclui um determinado grau de risco, incluindo
o ajuste das denições na BIOS, a aplicação de tecnologia Untied Overclocking ou a
utilização de ferramentas de overclocking de terceiros. O overclocking poderá afectar
a estabilidade do sistema, ou mesmo causar danos aos componentes e dispositivos do
seu sistema. Overclocking deverá ser efectuado por sua conta e risco. Não nos respon-
sabilizamos por possíveis danos causados pelo overclocking.
Devido às limitações, o tamanho real da memória de 4GB reservada para utilização
em sistemas operativos Windows® 32-bits poderá ser inferior. Os sistemas operativos
Windows® 64-bits não possuem essas limitações. Pode utilizar o ASRock XFast RAM
para dar uso à memória que o Windows® não utiliza.
81
Português
Fatal1ty B85 Killer Series
1.3 Conguração dos jumpers
A imagem abaixo ilustra como os jumpers são congurados. Quando a tampa do
jumper é colocada nos pinos, o jumper é "Curto". Se não for colocada uma tampa
de jumper nos pinos, o jumper é "Aberto". A imagem ilustra um jumper de 3 pinos
cujos pino1 e pino2 estão "Curtos" quando a tampa do jumper é colocada nestes 2
pinos.
Jumper para limpar o
CMOS
(CLRCMOS1)
(consultar p.1, N.º 16)
CLRCMOS1 permite-lhe limpar os dados no CMOS. Para limpar e repor os parâ-
metros do sistema para os valores predenidos, encerre o computador e desligue
a cha da tomada. Depois de aguardar 15 segundos, utilize uma tampa de jumper
para ligar o pino2 e o pino3 no CLRCMOS1 durante 5 segundos. No entanto, não
limpe o CMOS logo após ter efectuado a actualização da BIOS. Se precisar de lim-
par o CMOS logo após ter terminado uma actualização da BIOS, deverá primeiro
iniciar o sistema e voltar a encerrá-lo antes de efectuar a acção de limpeza do
CMOS. Tenha em atenção que a palavra-passe, data, hora e perl predenido de
utilizador apenas serão limpos se a pilha do CMOS for retirada.
Limpar CMOSPredenição
82
Português
1.4 Terminais e conectores integrados
Terminal do painel de
sistema
(PAINEL1 de 9 pinos)
(consultar p.1, N.º 11)
Ligue o botão de ali-
mentação, o botão de
reposição e o indicador
do estado do sistema no
chassis a este terminal de
acordo com a descrição
abaixo. Tenha em aten-
ção os pinos positivos e
negativos antes de ligar
os cabos.
PWRBTN (Botão de alimentação):
Ligue ao botão de alimentação no painel frontal do chassis. Pode congurar a forma
para desligar o seu sistema através do botão de alimentação.
RESET (Botão de reposição):
Ligue ao botão de reposição no painel frontal do chassis. Prima o botão de reposição
para reiniciar o computador caso este bloqueie e não seja possível reiniciar normal-
mente.
PLED (LED de alimentação do sistema):
Ligue ao indicador do estado da alimentação no painel frontal do chassis. O LED
cará acesso quando o sistema estiver em funcionamento. O LED cará intermitente
quando o sistema estiver nos estados de suspensão S1/S3. O LED cará desligado
quando o sistema estiver no estado de suspensão S4 ou desligado (S5).
HDLED (LED de actividade do disco rígido):
Ligue ao LED de actividade do disco rígido no painel frontal do chassis. O LED cará
acesso quando o disco rígido estiver a ler ou a escrever dados.
O design do painel frontal poderá variar dependendo do chassis. Um módulo de painel
frontal consiste principalmente em um botão de alimentação, um botão de reposição,
um LED de alimentação, um LED de actividade do disco rígido, um altifalante, etc.
Ao ligar o seu módulo de painel frontal do chassis a este conector, certique-se de que
os os e os pinos têm uma correspondência exacta.
Os terminais e conectores integrados NÃO são jumpers. NÃO coloque tampas de jum-
pers sobre estes terminais e conectores. Colocar tampas de jumpers sobre os terminais
e conectores irá causar danos permanentes à placa principal.
GND
R #ESET
PWRBTN#
PLED-
PLED+
GND
HDLED-
HDLED+
1
GND
83
Português
Fatal1ty B85 Killer Series
Conector do LED de ali-
mentação
(PLED1 de 3 pinos)
(consultar p.1, N.º 9)
Ligue o LED de alimen-
tação do chassis a este
terminal para
indicar o
estado de alimentação do
sistema.
Conectores ATA2 de série
(SATA2_0:
consultar p.1, N.º 18)
(SATA2_1:
consultar p.1, N.º 17)
Estes dois conectores
SATA2 suportam cabos
de dados SATA para dis-
positivos de armazena-
mento interno com uma
velocidade de transferê
cia de dados de até 3,0
Gb/s.
Conectores ATA3 de série
(SATA3_0:
consultar p.1, N.º 12)
(SATA3_1:
consultar p.1, N.º 13)
(SATA3_2:
consultar p.1, N.º 15)
(SATA3_3:
consultar p.1, N.º 14)
(SATA3_4:
Estes quatro conecto-
res SATA3 suportam
cabos de dados SATA
para dispositivos de
armazenamento interno
com uma velocidade de
transferência de dados de
até 6,0 Gb/s.
Terminais USB 2.0
(USB4_5 de 9 pinos)
(consultar p.1, N.º 20)
(USB6_7 de 9 pinos)
(consultar p.1, N.º 21)
Para além das
dois
portas
USB 2.0 no painel de E/
S, existem dois terminais
nesta placa principal.
Cada terminal USB 2,0
é capaz de suportar duas
portas.
Terminais USB 3,0
(USB3_2_3 de 19 pinos)
(consultar p.1, N.º 8)
Para além das quatro
portas USB 3.0 no painel
de E/S, existe um termi-
nal nesta placa principal.
Cada terminal USB 3.0 é
capaz de suportar duas
portas.
1
PLED+
PLED+
PLED-
SATA2_0
SATA2_1
SATA3_0SATA3_2
SATA3_1SATA3_3
1
IntA_PB_D+
Dummy
IntA_PB_D-
GND
IntA_PB_SSTX+
GND
IntA_PB_SSTX-
IntA_PB_SSRX+
IntA_PB_SSRX-
VbusVbus
Vbus
IntA_PA_SSRX-
IntA_PA_SSRX+
GND
IntA_PA_SSTX-
IntA_PA_SSTX+
GND
IntA_PA_D-
IntA_PA_D+
DUMMY
GND
GND
P+
P-
U RSB_PW
P+
P-
U RSB_PW
1
84
Português
Terminal de áudio do
painel frontal
(HD_AUDIO1 de 9 pinos)
(consultar p.1, N.º 22)
Este terminal destina-se
à ligação de dispositivos
áudio ao painel de áudio
frontal.
Terminal do altifalante do
chassis
(SPEAKER1 de 4 pinos)
(consultar p.1, N.º 10)
Ligue o altifalante do
chassis a este terminal.
Conectores da ventoinha
do chassis e alimentação
(CHA_FAN1 de 4 pinos)
(consultar p.1, N.º 16)
(CHA_FAN2 3 pinos)
(consultar p.1, N.º 24)
(CHA_FAN3 de 3 pinos)
(consultar p.1, N.º 23)
(PWR_FAN1 de 3 pinos)
(consultar p.1, N.º 7)
Ligue os cabos da ven-
toinha aos conectores
da ventoinha colocando
o cabo preto no pino de
ligação à terra.
1. O Áudio de alta denição suporta Detecção de cha, mas o cabo de painel no chas-
sis deverá suportar HDA para funcionar correctamente. Siga as instruções no nosso
manual e no manual do chassis para instalar o seu sistema.
2. Se utilizar um painel de áudio AC’97, instale-o no terminal de áudio do painel
frontal de acordo com os passos abaixo:
A. Ligue Mic_IN (MIC) a MIC2_L.
B. Ligue Audio_R (RIN) a OUT2_R e Audio_L (LIN) a OUT2_L.
C. Ligue Terra (GND) a Terra (GND).
D. MIC_RET e OUT_RET destinam-se apenas ao painel de áudio HD. Não precisa
de os ligar para o painel de áudio AC’97.
E. Para activar o microfone frontal, aceda ao separador “Microfone Frontal” no
painel de controlo Realtek e ajuste o “Volume de gravação”.
J_SENSE
OUT2_L
1
MIC_RET
PRESENCE#
GND
OUT2_R
MIC2_R
MIC2_L
OUT_RET
1
+5V
DUMMY
DUMMY
SPEAKER
GN
D
+12V
CHA_FAN_SPEED
F
AN_SPEED_CONTROL
GND
+ 12V
CHA_ FAN_SPEED
85
Português
Fatal1ty B85 Killer Series
Conectores da ventoinha
da CPU
(CPU_FAN1 de 4 pinos)
(consultar p.1, N.º 3)
(CPU_FAN2 de 3 pinos)
(consultar p.1, N.º 2)
Esta placa principal
inclui um conector
de ventoinha de CPU
(Ventoinha silenciosa)
de 4 pinos. Se pretender
ligar uma ventoinha de
CPU de 3 pinos, ligue-a
ao Pino 1-3.
Conector de alimentação
ATX
(ATXPWR1 de 24 pinos)
(consultar p.1, N.º 6)
Esta placa principal
inclui um conector de
alimentação de 12V ATX
de 24 pinos. Para utilizar
uma fonte de alimen-
tação ATX de 20 pinos,
introduza-a no Pino 1 e
Pino 13.
Conector de alimentação
de 12V ATX
(ATX12V1 de 8 pinos)
(consultar p.1, N.º 1)
Esta placa principal
inclui um conector de
alimentação de 12V ATX
de 8 pinos. Para utilizar
uma fonte de alimen-
tação ATX de 4 pinos,
introduza-a no Pino 1 e
Pino 5.
12
1
24
13
GND
+12V
CPU_FAN_SPEED
GND
+12V
CPU_FAN_SPEED
FA
N_SPEED_CONTRO
86
Türkçe
1 Giriş
Zorlu kalite kontrol süreçlerinden geçmiş olan ASRock Fatal1ty B85 Killer Serisi
anakartını satın aldığınız için teşekkür ederiz. Sağlam tasarımı ile ASRock’ın kalite
ve dayanıklılık taahhüdüne uygun şekilde mükemmel performans sağlar.
1.1 Ambalaj İçeriği
• ASRock Fatal1ty B85 Killer Serisi Anakartı (ATX Form Faktörü)
• ASRock Fatal1ty B85 Killer Serisi Hızlı Kurulum Kılavuzu
• ASRock Fatal1ty B85 Killer Serisi Destek CD’si
• 2 x Seri ATA (SATA) Veri Kablosu (İsteğe Bağlı)
• 1 x I/O Panel Kalkanı
Anakart özellikleri ve BIOS yazılımı güncellenebileceğinden, bu kılavuzun içeriği her-
hangi bir bildirimde bulunulmaksızın değiştirilebilir. Bu kılavuz üzerinde herhangi
bir değişiklik yapılması halinde, güncellenmiş sürüm, herhangi bir bildirim yapıl-
maksızın ASRock'ın web sitesinde yer alacaktır.. Bu anakart ile ilgili olarak teknik
destek almak istiyorsanız, lütfen kullandığınız model hakkında özel bilgiler için web
sitemizi ziyaret edin. En güncel VGA kartları ve CPU destek listelerini de ASRock'ın
web sitesinden bulabilirsiniz. ASRock'ın web sitesi .http://www.asrock.com
87
Türkçe
Fatal1ty B85 Killer Series
1.2 Özellikler
Platform • ATX Form Faktörü
• Premum Gold Sığa tasarımı (%100 Japon-malı kaltel İletken
Polmer Sığalar)
A-Stili • Purity SoundTM
Oyun Zırhı CPU Gücü
• Yüksek Yoğunluklu Güç Bağlayıcısı
VGA Kartı
• VGA PCIe Yuvasında (PCIE2) 15 Gold Finger
Internet
• Qualcomm® Atheros® Killer
TM LAN
Ses
• Purity SoundTM
CPU • 4ncü Nesl Intel® CoreTM 7 / 5 / 3 / Xeon® / Pentum® / Celeron®,
LGA1150 Paketnde desteklemektedr
• Djtal Güç Tasarımı
• 6 Güç Saası Tasarımı
• Intel® Turbo Boost 2.0 Teknolojsn destekler
Yonga
kümesi
• Intel® B85
• Intel® Küçük İşletme Avantaj 2.0 özellğn destekler
Bellek • Ç Kanallı DDR3 Bellek Teknolojs
• 4 x DDR3 DIMM yuvaları
• DDR3 1600/1333/1066 ECC olmayan, ara belleğe alınmamış
belleğ destekler
• Maksmum sstem belleğ kapastes: 32GB (bkz. DİKKAT)
• Intel® Üstün Bellek Profl (XMP)1.3/1.2 özellğn destekler
Genişlet-
me Yuvası
• 1 x PCI Express 3.0 x16 yuva (PCIE2: x16 modu)
• 1 x PCI Express 2.0 x16 yuva (PCIE4: p91-x4 modu)
• 2 x PCI Express 2.0 p91-x1 yuva
• 3 x PCI yuvası
• 15Gold Fnger (PCIE2 yuvası) desteğne sahptr
• AMD Quad CrossFreXTM ve CrossFreXTM desteğne sahptr
88
Türkçe
Grafikler
• Intel® HD Graphics Dahili Görselleri ile VGA çıktıları,
yalnızca GPU entegre edilmiş işlemciler ile desteklenir.
• Intel® HD Graphics Dahili Görsellerini destekler : AVC, MVC
(S3D) ve MPEG-2 Full HW Encode1, Intel® InTruTM 3D, Intel®
Net Video HD Teknolojisi, Intel® Insider
TM, Intel® HD Graphics
4600 ile Intel® Quick Sync Video
• Pixel Shader 5.0, DirectX 11.1
• Maksimum paylaşılan bellek 1792MB
• Üç VGA Çıkışı seçeneği: D-Sub, DVI-D ve HDMI
• Üçlü Monitör Desteği
• 4K × 2K (4096x2304) @ 24Hz'ye kadar çözünürlükte HDMI
teknolojisini destekler
• 1920x1200 @ 60Hz'ye kadar DVI-D işlevini destekler
• 1920x1200 @ 60Hz'ye kadar çözünürlükle D-Sub işlevini
destekler
• HDMI ile Otomatik Dudak Senkronizasyonu (12bpc=, xvYCC
ve HBR (Yüksek Bit Hızında Ses) özelliklerini destekler
(Uyumlu bir HDMI monitörü kullanılmalıdır)
• DVI-D ve HDMI bağlantı noktaları ile HDCP işlevini
destekler
• DVI-D, ve HDMI bağlantı noktalarıyla, Full HD 1080p Blu-ray
(BD) kayıttan yürütme özelliklerini destekler
Ses • İçerik Koruma Özelliği ile 7.1 CH HD Ses (Realtek ALC1150
Ses Codec Bileşeni)
• Üstün Blu-ray ses desteği
• Purity SoundTM
- Diferansiyel yükselticili 115dB SNR DAC
- TI® NE5532 (600 Ohm'a kadar Premium Kulaklık Yükselticisi
desteği)
- Direct Drive Teknolojisi
- EMI ekranlama koruyucusu
- PCB izole ekranlaması desteğine sahiptir
• DTS Connect işlevini destekler
Termékspecifikációk
| Márka: | Asrock |
| Kategória: | alaplap |
| Modell: | FATAL1TY B85 KILLER |
Szüksége van segítségre?
Ha segítségre van szüksége Asrock FATAL1TY B85 KILLER, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek
Útmutatók alaplap Asrock
25 Március 2025
13 Január 2025
13 Január 2025
12 Január 2025
2 Január 2025
28 December 2024
14 Október 2024
10 Október 2024
4 Október 2024
3 Október 2024
Útmutatók alaplap
- alaplap Sharkoon
- alaplap Gigabyte
- alaplap Asus
- alaplap Supermicro
- alaplap Biostar
- alaplap MSI
- alaplap NZXT
- alaplap ECS
- alaplap Evga
- alaplap Intel
- alaplap Foxconn
- alaplap Advantech
- alaplap Elitegroup
- alaplap EPoX
Legújabb útmutatók alaplap
9 Április 2025
9 Április 2025
3 Április 2025
3 Április 2025
3 Április 2025
3 Április 2025
2 Április 2025
2 Április 2025
31 Március 2025
27 Március 2025