Használati útmutató APC Smart-UPS SRTRK4

APC UPS Smart-UPS SRTRK4

Olvassa el alább 📖 a magyar nyelvű használati útmutatót APC Smart-UPS SRTRK4 (8 oldal) a UPS kategóriában. Ezt az útmutatót 3 ember találta hasznosnak és 2 felhasználó értékelte átlagosan 4.5 csillagra

Oldal 1/8
Installation Guide Smart-UPSOn-Line
SRTRK4 Tower to Rack-Mount Conversion
Package Contents
Inspect the contents upon receipt. Notify the carrier and dealer if the unit is damaged.
SRTRK4 is compatible with all the variants of the following models:
SRT1000
SRT1500
SRT2200
SRT3000
Note: UPS and External Battery Pack (XLBP) models may differ in appearance from those depicted in these graphics.
The installation process is identical for all models.
One Rail Kit with instructions and
hardware for installing rails in a rack.
1 pair of rack-mount brackets
6 flat head screws to secure rack-mount brackets to the UPS
4 ornamental screws to secure rack-mount brackets to the rails
1 pair of rail cleats
8 screws to secure cleats to the UPS
su04
34a
x4
x6
x8
Smart-UPS On-2 Line SRTRK4 Tower to Rack-Mount Conversion2
Tower to Rack-Mount Conversion of UPS
CAUTION
DAMAGE TO EQUIPMENT OR PERSONNEL
The equipment is heavy. Each APCRBC152 battery module weighs 16.4 kg (36.2 lbs) and each APCRBC141
battery module weighs 12.5 kg (27.6 lb). Each APCRBC155 battery module weighs 11 kg (24.25 lb).
Always practice safe lifting techniques adequate for the weight of the equipment.
Remove the battery modules before installing the UPS.
Use the battery module handle to carefully slide the battery module in or out of the unit.
Do not use the battery module handle to lift or carry the battery module.
Place the UPS on a table to remove the stabilizer brackets.
Always install the UPS at the bottom of the rack.
Always install the XLBP below the UPS in the rack.
Failure to follow these instructions can result in equipment damage and minor or moderate injury.
 
 
suo0875b
suo0874b
suo0873b
x3
suo0872b
Smart-UPS On-2 Line SRTRK4 Tower to Rack-Mount Conversion 3
Install UPS in Rack
Refer to the Rail Kit Installation Guide for instructions on rail installation.
 
CAUTION
DAMAGE TO EQUIPMENT OR PERSONNEL
The equipment is heavy. Always practice safe lifting techniques adequate for the weight of the equipment.
Always use the recommended number of screws to secure brackets to the UPS.
Always use the recommended number of screws to secure the UPS to the rack.
Always install the UPS at the bottom of the rack.
Always install the XLBP below the UPS in the rack.
Failure to follow these instructions can result in equipment damage and minor or moderate injury
 
suo0871b
su0845b
suo
0866e
x3
x3
x4
suo0867a

Termékspecifikációk

Márka: APC
Kategória: UPS
Modell: Smart-UPS SRTRK4

Szüksége van segítségre?

Ha segítségre van szüksége APC Smart-UPS SRTRK4, tegyen fel kérdést alább, és más felhasználók válaszolnak Önnek




Útmutatók UPS APC

APC

APC RBC150 Útmutató

3 Április 2025
APC

APC RBC151 Útmutató

3 Április 2025
APC

APC RBC172 Útmutató

29 Március 2025
APC

APC RBC145J Útmutató

29 Március 2025
APC

APC RBC140J Útmutató

29 Március 2025
APC

APC AP9922 Útmutató

29 Március 2025
APC

APC RBC148 Útmutató

29 Március 2025
APC

APC Back- 300 Útmutató

28 Március 2025

Útmutatók UPS

Legújabb útmutatók UPS